The global site for the flying probe tester has been renewed.

It is a board inspection device capable of ultra-fast in-circuit testing at a top-class level in the industry.

We have completely revamped the platform compared to the conventional model, increasing the probe movement speed by up to 50% and dramatically improving contact position accuracy. Our new high-precision, wide-range measurement system, along with the groundbreaking 4-head 6-flying probe mechanism, significantly reduces inspection costs and enhances quality in the assembly process, regardless of substrate variety or production volume. ★You can bring your own substrates for evaluation tests at our demo rooms in Okayama headquarters and Tokyo branch★ We can conduct a series of tests including the creation of inspection programs, inspections using actual substrates, and summarizing evaluation results. If you are interested, please apply through the 'Contact Us' section below.

• Measurement and Inspection

It is a board inspection device capable of ultra-fast in-circuit testing at a top-class level in the industry. (Supported board size for inspection: up to 985×610)

The APT-1340J maintains its basic performance while expanding the compatible board size to W635×D610mm. Additionally, by adding an optional split inspection function, it can inspect long boards up to W985×D610mm. It can accommodate components with a height of 60mm and board weights of up to 10kg, making it suitable for inspecting boards used in automotive, aerospace, and medical devices, as well as power supply boards and probe cards, which are larger and heavier. ★You can bring your boards to our demonstration room at our Okayama headquarters for evaluation testing★ We can conduct a series of tests, including creating inspection programs, inspecting actual boards, and summarizing evaluation results. If you are interested, please apply through the 'Contact Us' section below. *For product information, please download the PDF or feel free to contact us.*

• Measurement and Inspection

This is a flagship model that arranges probe heads above and below, enabling simultaneous in-circuit testing of both sides of the substrate.

Four probes are arranged on the top side of the substrate and two on the bottom side. Each probe can move freely and at high speed, achieving an astonishing inspection speed that is world-class in standard. By using the upper and lower flying probes simultaneously, a combination inspection of up to six probes allows for simultaneous contact inspection at both points on the top and bottom sides of the substrate. This significantly expands the inspection range and further accelerates inspection time. It is equipped with a wealth of features and boasts world-class standards in speed and positioning accuracy. ★You can bring your substrate to our demo room at our Okayama headquarters for evaluation testing★ We can conduct a series of tests including the creation of inspection programs, inspections using actual substrates, and summarizing evaluation results. If you are interested, please apply through the 'Contact Us' section below.

• Measurement and Inspection

The probe heads are arranged above and below, allowing for simultaneous in-circuit testing of both sides of the substrate. (Supported substrate size for inspection: up to 985×610)

The simultaneous use of upper and lower flying probes allows for a combination inspection of up to 6 probes, enabling the inspection of components that can make contact at both points on the top and bottom of the substrate. This model boasts world-class standards in speed and positioning accuracy while expanding the compatible substrate size to W635×D610mm. Additionally, by adding an optional split inspection function, it can also inspect long substrates up to W985×D610mm. It can accommodate component heights of up to 60mm and substrate weights of up to 10kg, making it suitable for inspecting substrates used in automotive, aerospace, and medical devices, as well as power boards and probe cards, which are larger and heavier. ★Evaluation tests can be conducted by bringing in substrates to the demo room at our Okayama headquarters★ A complete testing process is possible, including the creation of inspection programs, testing using actual substrates, and summarizing evaluation results. If you are interested, please apply through the 'Contact Us' section below.

• Measurement and Inspection

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

Due to the mandatory implementation of heatstroke prevention measures in the workplace, we have seen an increase in inquiries regarding heatstroke at our company. Among these, we have received many requests to "measure the heat index (WBGT) in accordance with JIS standards." To conclude, the observation of the heat index (WBGT) in accordance with the Japanese Industrial Standards JIS Z 8504 can be achieved by utilizing the black globe thermometer from the Natural Disaster Prevention System ZEROSAI. - Real-time heat index (WBGT) management in the cloud, combined with pinpoint weather forecasting - Notifications via electronic display boards and business chat (LINEWORKS, direct, Wowtalk, Microsoft Teams) when threshold values are exceeded - Centralized management of various observation equipment information such as wind speed, rainfall, water level, noise, and vibration - API integration available *For more details, please visit our website or feel free to contact us.

We would like to inform you that, in order to further strengthen and enhance our sales and service operations, there will be changes to our Nagoya Sales Office as of April 1st, as detailed below. ■ Relocation of Nagoya Sales Office 【New Address】 〒460-0003 6th Floor, Sando Building, 1-7-27 Nishiki, Naka Ward, Nagoya City, Aichi Prefecture TEL: 052-212-6520 / FAX: 052-212-6521 *Please note that the TEL and FAX numbers will also change. Taking this opportunity, all of our staff will continue to make even greater efforts. Please feel free to contact us.

To combat heatstroke during the summer, Sysmet Co., Ltd. has started providing black globe thermometers again this year. Differences from conventional black globe thermometers: - 17-day ahead heat index (WBGT) forecast with a 500m mesh - 1-minute updates of heat index (WBGT) measurements compliant with JIS standards - Email alerts when threshold values are exceeded, along with alarm devices (electronic display boards, rotating lights) and notifications via direct LINE WORKS, etc.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.