I was interviewed by "The Contact Point for Circuit Boards."

Thank you for visiting the Total Solution Exhibition for Electronic Devices 2024 / JISSO PROTEC 2024.

Thank you to everyone who visited the Takaya Corporation booth at the "Electronic Equipment Total Solution Exhibition 2024 (JPCA Show 2024) / JISSO PROTEC 2024" held at Tokyo Big Sight from June 12 to June 14, 2024. We have published information about the products we exhibited. If you have any questions or inquiries regarding the content, please feel free to contact us. Additionally, in conjunction with this exhibition, we received the 20th "JPCA Award" for our "Hybrid Inspection System combining JTAG testing and flying probe testers," and an introduction panel regarding this award was displayed at the venue.

• Measurement and Inspection

We have won the 20th "JPCA Award"!

Takaya Corporation (Headquarters: Ihara-cho, Ihara City, Okayama Prefecture; President: Ryuji Okamoto) has received the 20th "JPCA Award" (hereinafter referred to as "the Award") for its "Hybrid Inspection System Combining JTAG Testing and Flying Probe Testing." The awarded "Hybrid Inspection System Combining JTAG Testing and Flying Probe Testing" integrates the flying probe tester with JTAG boundary scan testing, allowing for the mutual complementarity of each inspection method. This maximizes the test coverage of high-density mounted circuit boards and enables more accurate fault diagnosis, introducing a new system. A panel introducing the Award will be displayed at the "JPCA Show 2024 (Total Solutions for Electronic Devices Exhibition 2024)" held at Tokyo Big Sight from June 12 (Wednesday) to June 14 (Friday). Our company will also have an exhibition booth at the event, showcasing a live demonstration of the flying probe tester. We invite you to come and see it.

• Measurement and Inspection

It is a board inspection device capable of ultra-fast in-circuit testing at a top-class level in the industry.

We have completely revamped the platform compared to the conventional model, increasing the probe movement speed by up to 50% and dramatically improving contact position accuracy. Our new high-precision, wide-range measurement system, along with the groundbreaking 4-head 6-flying probe mechanism, significantly reduces inspection costs and enhances quality in the assembly process, regardless of substrate variety or production volume. ★You can bring your own substrates for evaluation tests at our demo rooms in Okayama headquarters and Tokyo branch★ We can conduct a series of tests including the creation of inspection programs, inspections using actual substrates, and summarizing evaluation results. If you are interested, please apply through the 'Contact Us' section below.

• Measurement and Inspection

It is a board inspection device capable of ultra-fast in-circuit testing at a top-class level in the industry. (Supported board size for inspection: up to 985×610)

The APT-1340J maintains its basic performance while expanding the compatible board size to W635×D610mm. Additionally, by adding an optional split inspection function, it can inspect long boards up to W985×D610mm. It can accommodate components with a height of 60mm and board weights of up to 10kg, making it suitable for inspecting boards used in automotive, aerospace, and medical devices, as well as power supply boards and probe cards, which are larger and heavier. ★You can bring your boards to our demonstration room at our Okayama headquarters for evaluation testing★ We can conduct a series of tests, including creating inspection programs, inspecting actual boards, and summarizing evaluation results. If you are interested, please apply through the 'Contact Us' section below. *For product information, please download the PDF or feel free to contact us.*

• Measurement and Inspection

This is a flagship model that arranges probe heads above and below, enabling simultaneous in-circuit testing of both sides of the substrate.

Four probes are arranged on the top side of the substrate and two on the bottom side. Each probe can move freely and at high speed, achieving an astonishing inspection speed that is world-class in standard. By using the upper and lower flying probes simultaneously, a combination inspection of up to six probes allows for simultaneous contact inspection at both points on the top and bottom sides of the substrate. This significantly expands the inspection range and further accelerates inspection time. It is equipped with a wealth of features and boasts world-class standards in speed and positioning accuracy. ★You can bring your substrate to our demo room at our Okayama headquarters for evaluation testing★ We can conduct a series of tests including the creation of inspection programs, inspections using actual substrates, and summarizing evaluation results. If you are interested, please apply through the 'Contact Us' section below.

• Measurement and Inspection

The probe heads are arranged above and below, allowing for simultaneous in-circuit testing of both sides of the substrate. (Supported substrate size for inspection: up to 985×610)

The simultaneous use of upper and lower flying probes allows for a combination inspection of up to 6 probes, enabling the inspection of components that can make contact at both points on the top and bottom of the substrate. This model boasts world-class standards in speed and positioning accuracy while expanding the compatible substrate size to W635×D610mm. Additionally, by adding an optional split inspection function, it can also inspect long substrates up to W985×D610mm. It can accommodate component heights of up to 60mm and substrate weights of up to 10kg, making it suitable for inspecting substrates used in automotive, aerospace, and medical devices, as well as power boards and probe cards, which are larger and heavier. ★Evaluation tests can be conducted by bringing in substrates to the demo room at our Okayama headquarters★ A complete testing process is possible, including the creation of inspection programs, testing using actual substrates, and summarizing evaluation results. If you are interested, please apply through the 'Contact Us' section below.

• Measurement and Inspection

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK

From November 11, 2025 (Tuesday), at Pacifico Yokohama, we will be exhibiting at interOpto2025 / Light and Laser Science and Technology Fair (organized by the Optical Industry Technology Promotion Association / Optronics Corporation) with a focus on: - UV-transmitting glass that can be molded - Diffusion glass that can uniformly diffuse incident light - A double-sided lens array that is molded without lamination 【About the Exhibition】 Event Name: interOpto2025 / Light and Laser Science and Technology Fair UV Fair Date: November 11 (Tuesday) to 13 (Thursday), 2025 Opening Hours: 10:00 AM to 5:00 PM Venue: Pacifico Yokohama Exhibition Hall C Booth Number: C-15 Organizer: Optical Industry Technology Promotion Association / Optronics Corporation Official Website: https://www.optronics.co.jp/interopto/ We invite everyone attending this exhibition to visit our booth "Gosuzumi Seiko Glass." We sincerely look forward to meeting you on-site.