Reverse bias test of power devices (up to 2000V)

It is possible to set the failure criteria (current value)! Evaluate device degradation and characteristics through high temperature and high voltage power supply.

At Aites Co., Ltd., high-temperature reverse bias testing (HTRB) for evaluating the oxide film and junction of power devices can be applied up to 2000V. By monitoring the leakage current during the test, the degradation status of the device can be grasped in real-time. Since the power supply is independent, even if one device fails during the test, it does not affect the other devices. Additionally, it is possible to set a failure criterion (current value) and to cut off the power supply to the device deemed faulty at the time of failure judgment. 【Features】 ■ Real-time monitoring of the leakage current during the test allows for understanding the degradation status of the device. ■ The independent power supply ensures that the failure of one device during the test does not affect other devices. ■ The power supply to the device deemed faulty can be cut off at the time of failure judgment. *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

Support for the difficulties in the development and evaluation of components, devices, and materials related to semiconductor products.

【Testing, Evaluation, Analysis】 　●Reliability Testing 　　■Temperature Cycle Testing 　　■Thermal Shock Testing 　　■High-Temperature Storage Testing 　　■Highly Accelerated Life Testing 　　■Preconditioning 　　■Hot Oil Testing 　　■In-situ Continuous Measurement 　　■Ion Migration Testing 　　■Electromigration Testing 　　■Test Consulting 　●Evaluation Testing 　　■Bond Strength Testing: Pull/Shear Testing 　　■Mechanical Strength Testing: Vibration/Shock/Fall Testing/Compression Strength/Shear Strength 　　■ESD/Latch Up/CDM Testing 　　■Electrical Characteristic Measurement 　　■Salt Spray Testing 　●Analysis 　　■X-ray Transmission Observation 　　■Ultrasonic Microscope Observation 　　■Luminescence Analysis (EMS/IR-OBIRCH) 　　■Scanning Electron Microscope (SEM) 　　■Transmission Electron Microscope (TEM) 　　■Surface Contamination Analysis (TOF-SIMS) 　　■Foreign Material Analysis (FT-IR)

• Other analytical equipment

In-Situ Continuous Measurement Reliability Evaluation Testing Service

In-situ continuous measurement reliability evaluation tests involve applying stress while measuring characteristics to conduct reliability assessments. ● Accurate understanding of failure time is possible In a readout method where samples are taken out from a stress environment at fixed times, failure can only be understood at the timing of the readout, making it impossible to know the exact time of failure occurrence. In-situ measurement allows for accurate understanding of failure time. ● Detection of recoverable failures is possible Recoverable failures can cause significant issues in the market. In most cases, these recoverable failures cannot be detected using the readout method, but in-situ measurement allows for the detection of recoverable failures, enabling accurate judgment and assessment. ● Monitoring of stress application conditions on samples is possible The stress application conditions and measurement data can be confirmed in real-time.

• Analysis and prediction system
• Other analytical equipment

We will thoroughly evaluate and verify power devices from all angles.

■Problem-Solving Ability Consulting that leads to solutions with knowledge and technology Supporting customer schedules with quick responses ■Investigative Ability Skills to pinpoint and visualize malfunctioning areas Deep insight and advanced, delicate sample processing techniques ■Specialized Equipment Liquid tank thermal shock testing at up to 180°C Power cycle testing essential for power semiconductors

• Analysis and prediction system
• Other analytical equipment

This is a list of devices used for analysis, evaluation, and testing services of AITES.

Aites is a solution-oriented company that sincerely addresses customer challenges in cutting-edge industrial fields. We utilize various owned devices to provide optimal solutions. ■ Product Analysis / Defect Analysis / Failure Analysis Morphological observation, electrical characteristic measurement, defect analysis, failure analysis, sample processing ■ Reliability Evaluation Testing Reliability evaluation testing, ESD/latch-up testing, strength testing, optical characteristics ■ Physical Analysis / Chemical Analysis Physical analysis, surface analysis, chemical analysis

• Analysis and prediction system

An overview of ion migration evaluation and the details of the test implementation are provided!

One of the reliability evaluation methods, the ion migration evaluation test, has become increasingly important as a pre-evaluation due to the transition of products towards being lighter, shorter, and smaller. This document provides an overview of ion migration evaluation and the details of the test implementation using an example of our evaluation tests. We will also introduce the usefulness of the continuously measuring (In-Situ) equipment used in the evaluation tests. [Contents] ■ Introduction ■ Ion Migration ■ Ion Migration Evaluation Test ■ Evaluation Method ■ Evaluation Test Case ■ Conclusion ■ References *For more details, please refer to the PDF document or feel free to contact us.

• Other Software
• others

Contracted power cycle testing using a power cycle testing device! We will cooperate in quality improvement along with failure analysis and assessment.

At Aites Co., Ltd., we offer contract power cycle testing using Siemens (Mentor) power cycle testing equipment. We can also handle the creation of various jigs necessary for testing. Additionally, we accommodate various observations and measurements of power devices. We can capture changes before and after tests such as power cycle testing. 【Features】 ■ We can handle the creation of various jigs necessary for testing. ■ We accommodate various observations and measurements of power devices. ■ We can capture changes before and after tests such as power cycle testing. *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• Other analytical equipment
• others

Suitable for the evaluation of die attach and TIM materials! We support everything from prototyping to evaluation.

At AITES Co., Ltd., we offer "Module Prototyping and Thermal Resistance Evaluation." In the evaluation of power devices and the materials used in power devices, measuring thermal resistance by actually assembling the device is an effective method for understanding its performance. We can handle everything from prototyping to evaluation. If you are interested, please feel free to consult with us. 【Features】 <Prototyping of Power Modules> ■ We provide a consistent, flexible, and cost-effective service from chip procurement to module assembly. ■ Suitable for evaluating die attach and TIM materials. <Transient Thermal Resistance Measurement> ■ We conduct transient thermal resistance measurements using the T3Ster (power cycle testing device built-in) for power devices, obtaining structural functions and performing thermal analysis. ■ Using this data, we can compare materials, calculate thermal resistance, and estimate defective areas. *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• Other analytical equipment
• others

It is possible to apply up to 1000V in high temperature and high humidity environments for power devices! The deterioration status of the device can also be monitored.

At Aites Co., Ltd., we offer "HAST testing for power devices." 【Features】 - Capable of conducting unsaturated vapor pressure tests with a maximum voltage of 1000V - Evaluation of corrosion and migration of metal wiring through current flow under high temperature and high humidity conditions - Real-time monitoring during testing to assess sample degradation

• Other measuring instruments
• others

An article has been published regarding the case study of the attendance management system "KING OF TIME" implemented at Nichirei Industrial Co., Ltd. ~ In the case of Nichirei Industrial ~ The workload related to attendance management has decreased. With the transition from analog tasks to automated aggregation of working hours and granting of annual leave, we can now focus on our work with peace of mind. Particularly regarding the "punching method," we utilize fingerprint and facial recognition. By using biometric authentication, impersonation is not possible, and I believe the accuracy of attendance has significantly improved. Transparency has been ensured. 【Case Overview】 ■Challenges Before Implementation - Handwritten attendance sheets were used, resulting in input tasks to incorporate data into the payroll system. ■Key Points of Implementation - Systematization has reduced input tasks. Biometric authentication prevents impersonation. *For more details, please refer to the related links or feel free to contact us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, particularly at entrances facing sidewalks or roadways, there is a risk of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures using various sensors and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "sensor" + "controller" + "switching power supply (24V)" + "LED rotating light." *Please note that a separate control panel is required to include the controller and switching power supply (24V) when using the exit warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

Hotron's vehicle detection sensors allow you to search for products that meet your needs from three categories: "Purpose of Use," "Location of Use," and "Product List." The sensors detect the passage of vehicles and notify you with a rotating light, or switch the display of parking availability. They manage vehicle presence, full parking, and exit warnings in parking lots, contributing to safe driving and smooth operational management within the parking area. They are used in various settings, from coin-operated parking to large-scale parking lots.