Developed ultrasonic control technology utilizing a combination of sound and ultrasound.

Dynamic control of ultrasound to achieve stress relaxation on metal surfaces.

The Ultrasonic System Research Institute has developed a completely new dynamic control technology for ultrasound by utilizing two function generators. By generating oscillations with two different waveforms (sweep), we have achieved a technique to control the nonlinear phenomena of ultrasound. Note: The generation of (10th order and higher) harmonics caused by original oscillation control is realized by resonating with low-frequency vibration phenomena, resulting in the generation of high-amplitude harmonics, which is a nonlinear (resonance) phenomenon of ultrasonic vibrations. By optimizing the ultrasonic propagation characteristics of various components according to their intended purpose, efficient ultrasonic oscillation control becomes possible. Through the measurement and analysis of sound pressure data from ultrasonic testers, this system technology allows for the dynamic control of surface elastic wave changes according to the intended application. Practically, multiple (two types of) ultrasonic probes generate multiple (two types of) oscillations (sweep oscillation, pulse oscillation), which create complex vibration phenomena (original nonlinear resonance phenomena), achieving high sound pressure propagation states at high frequencies or low sound pressure levels at frequencies matched to the desired natural frequency.

• Analysis and prediction system
• Non-destructive testing
• Vibration and Sound Level Meter

Combination technology of function generator and ultrasonic probe

The Ultrasonic System Research Institute has developed ultrasonic oscillation control technology that enables the utilization of ultrasonic propagation states above 100 MHz by applying a function generator and ultrasonic probe to ultrasonic cleaners. This is a new application technology for precision cleaning, processing, and stirring, based on the measurement, analysis, evaluation, and technology of ultrasonic propagation states. By utilizing the acoustic properties (surface elastic waves) of various materials, it is possible to control ultrasonic stimulation above 100 MHz to the target object with an ultrasonic output of less than 20 W, even in a 1000-liter water tank. This was developed as an application method for nonlinear phenomena through an engineering (experimental and technical) perspective on elastic waves and an abstract algebraic ultrasonic model. The key point is to confirm the ultrasonic propagation characteristics of the target object, and it is important to set the oscillation conditions of the function generator as a control method for the original nonlinear resonance phenomenon (Note 1). Note 1: Original Nonlinear Resonance Phenomenon This refers to the resonance phenomenon of ultrasonic vibrations that occurs when the generation of harmonics caused by original oscillation control is realized at a high amplitude due to resonance phenomena.

• Analysis and prediction system
• Other measuring instruments
• others

Optimization of Cleaning with Ultrasonic Waves and Fine Bubbles (Microbubbles) for Specific Purposes

Program 1) Basic knowledge and generation mechanisms of ultrasound and fine bubbles (microbubbles) 1. Basics of ultrasound 2. Propagation phenomena of ultrasonic vibrations 3. Fine bubbles (microbubbles) 2) Cleaning methods using ultrasound and fine bubbles (microbubbles) and their benefits 1. Basics of cleaning 2. Physical actions, chemical actions, interactions 3. Benefits of fine bubbles 3) Concepts of ultrasonic cleaning devices and know-how for introduction, development, and improvement 1. Installation methods for tanks and transducers 2. Microbubble generation liquid circulation systems 4) Specific application examples of cleaning and concrete examples of ultrasonic cleaning devices with proven cleaning effects

• Non-destructive testing
• Scientific Calculation and Simulation Software
• others

Development of "Control Technology for Nonlinear Phenomena" Using a Small Pump

The Ultrasonic System Research Institute has developed "ultrasonic control technology" that dynamically controls nonlinear phenomena related to ultrasonic propagation by utilizing a small pump for liquid circulation. Nonlinear phenomena are evaluated through analysis using an ultrasonic tester. The complex changes in ultrasound (such as ultrasonic cleaners, ultrasonic probes, etc.) are confirmed through time-series data analysis of sound pressure from ultrasonic oscillation and reception, identifying various interactions. Based on the confirmation of these interactions, the oscillation control conditions using ultrasonic probes are optimized, achieving a dynamic ultrasonic control system tailored to specific objectives. In practical applications, such as ultrasonic cleaning, the ON/OFF control (or control of flow rate and velocity, etc.) of the current liquid circulation device is optimized by considering the ultrasonic propagation characteristics related to the installation state of the device and the surface elastic waves of the target object, including the output, oscillation frequency, and control conditions of the ultrasound. In particular, by utilizing the vibration characteristics of the pump to alternately circulate liquid and gas, new nonlinear effects of ultrasound and microbubbles are realized.

• Non-destructive testing
• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software

- Development of manufacturing technology for ultrasonic probes that can control ultrasonic propagation conditions above 900 MHz -

The Ultrasonic System Research Institute has developed manufacturing technology for ultrasonic probes that can control ultrasonic propagation states above 900 MHz, based on the classification of ultrasonic propagation phenomena. We can manufacture and develop original ultrasonic oscillation control probes tailored to specific purposes. The key point is to confirm the ultrasonic propagation characteristics of the ultrasonic probes. The response characteristics to dynamic changes in ultrasonic waves are the most important. This characteristic determines the range of possible harmonic generation. Currently, we can manufacture for the following range: Ultrasonic Probe: Overview Specifications - Measurement Range: 0.01 Hz to 200 MHz - Oscillation Range: 1.0 kHz to 25 MHz - Propagation Range: 0.5 kHz to over 900 MHz (confirmation of sound pressure data analysis) - Materials: Stainless steel, LCP resin, silicone, Teflon, glass, etc. - Oscillation Equipment: Example - Function Generator By understanding (measuring, analyzing, evaluating) the acoustic characteristics based on materials, shapes, and structures, we realize the desired ultrasonic propagation states. We offer consulting services for this technology. If you are interested, please contact us via email.

• Analysis and prediction system
• Vibration and Sound Level Meter
• others

Development of ultrasonic control technology utilizing a combination of sound and ultrasound — oscillation control technology based on sound pressure measurement and analysis evaluation.

The Ultrasonic System Research Institute focuses on the following technologies: - Measurement technology for ultrasonic propagation states (Original product: Ultrasonic Tester) - Analysis technology for ultrasonic propagation states (Nonlinear analysis system for time-series data) - Optimization technology for ultrasonic propagation states (Optimization processing of sound and ultrasound) - Manufacturing technology for megahertz ultrasonic oscillation probes - Control technology for surface acoustic waves ... Utilizing the above technologies, we are developing and applying control technology for ultrasound (nonlinear resonance phenomena) using the combination of sound and ultrasound. Note: Original nonlinear resonance phenomenon The generation of harmonics caused by original oscillation control, realized at high amplitudes through resonance phenomena, results in ultrasonic vibrations (resonance phenomena of harmonics above the 10th order). Ultrasonic propagation characteristics: 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates) Note: "R" free statistical processing language and environment autcor: autocorrelation bispec: bispectrum mulmar: impulse response mulnos: power contribution rate

• Non-destructive testing
• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software

Ultrasonic oscillation (sweep oscillation) system for controlling nonlinear phenomena

The Ultrasonic System Research Institute has developed a technology to control the nonlinear vibration phenomena of surface elastic waves based on the acoustic characteristics of original ultrasonic probes. The key point is the setting of sweep oscillation conditions using two ultrasonic probes (essentially, it cannot be controlled with just one probe for ultrasonic oscillation control. By combining the oscillation settings of the two probes, the occurrence of resonance phenomena and nonlinear phenomena can be controlled). Resonance phenomena and nonlinear phenomena can be controlled within a frequency range tailored to the intended use. In particular, when strong stimulation is required, this is achieved by utilizing low-frequency resonance phenomena (e.g., breaking glass). When high-frequency stimulation is needed, this is achieved by utilizing high-frequency nonlinear phenomena (e.g., 700 MHz stimulation).

• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software
• others

-- Ultrasonic System (Sound Pressure Measurement Analysis, Oscillation Control) --

The Ultrasonic System Research Institute manufactures and sells a system that combines the "Ultrasonic Tester NA (recommended type)," which allows for easy measurement and analysis of ultrasound, and the "Ultrasonic Oscillation System (20 MHz)," which enables easy control of ultrasonic oscillation. We propose system configurations (custom-made ultrasonic probes) tailored to the intended use (price and performance: cleaning, processing, stirring, inspection, etc.). Original Products: System Overview (Standard System) - Ultrasonic System (Sound Pressure Measurement and Analysis, Oscillation Control 10 MHz Type) - Ultrasonic Tester NA 10 MHz Type - Oscillation System 20 MHz Type Price: 281,050 yen (including tax: 10% consumption tax)

• Non-destructive testing
• Vibration and Sound Level Meter
• others

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK

From November 11, 2025 (Tuesday), at Pacifico Yokohama, we will be exhibiting at interOpto2025 / Light and Laser Science and Technology Fair (organized by the Optical Industry Technology Promotion Association / Optronics Corporation) with a focus on: - UV-transmitting glass that can be molded - Diffusion glass that can uniformly diffuse incident light - A double-sided lens array that is molded without lamination 【About the Exhibition】 Event Name: interOpto2025 / Light and Laser Science and Technology Fair UV Fair Date: November 11 (Tuesday) to 13 (Thursday), 2025 Opening Hours: 10:00 AM to 5:00 PM Venue: Pacifico Yokohama Exhibition Hall C Booth Number: C-15 Organizer: Optical Industry Technology Promotion Association / Optronics Corporation Official Website: https://www.optronics.co.jp/interopto/ We invite everyone attending this exhibition to visit our booth "Gosuzumi Seiko Glass." We sincerely look forward to meeting you on-site.