篠原電機 List of Products and Services

The "JuraCon Spacer" is a post used for mounting and supporting printed circuit boards, connectors, acrylic covers, and more. It has excellent insulation properties, is lightweight, and easy to handle. It is finished with nickel plating and is available in hexagonal types "BS type" and "AS type," as well as round types "BR type" and "AR type." 【Features】 ■ Excellent insulation properties ■ Lightweight and easy to handle ■ Nickel-plated finish ■ Available in hexagonal and round types *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• Piping and electrical wiring materials
• Safety and consumables

【Features】 The round post is covered with gray heat-shrink tubing. M4 has a thickness of 0.07mm, while M5 and M6 have a thickness of 0.1mm applied to the L dimension section. *For more details, please refer to the PDF document or feel free to contact us.*

• Secondary steel products
• Power distribution and control panels

【Features】 ■ By connecting two pieces, the height can be adjusted to 120mm or 150mm. ■ For fine adjustments of 1mm or 2mm, please use washers for adjustment. ■ The head of the main body is designed with a (-) groove so that it can be tightened with a (-) screwdriver. *For more details, please refer to the PDF document or feel free to contact us.

• Secondary steel products
• Power distribution and control panels

【Features】 The hexagonal post is covered with a gray heat shrink tube. The M4 has a thickness of 0.07mm, while the M5 and M6 have a thickness of 0.1mm, which are applied to the L dimension section. *For more details, please refer to the PDF document or feel free to contact us.*

• Secondary steel products
• Power distribution and control panels

This is a bracket used to adjust the installation height of equipment inside the panel. 【Features】 ■ By connecting two pieces, the height can be adjusted to either 120mm or 150mm. ■ For fine adjustments of 1mm or 2mm, please use washers for adjustment. ■ It can be tightened with a wrench or monkey wrench. *For more details, please refer to the PDF document or feel free to contact us.

• Secondary steel products
• Power distribution and control panels

The "standpipe" is a mounting stand used for operation panels, measurement panels, control panels, and more. Standard products are available for immediate delivery, eliminating the need to create drawings and arrange for them as was done in the past. In addition to the lineup of S-type, D-type, and K-type, we also accept orders for special sizes. 【Features】 ■ Standard products are available for immediate delivery ■ No need to create drawings and arrange for them ■ Three types available: S-type, D-type, K-type ■ Special sizes are also possible *For more details, please refer to the PDF materials or feel free to contact us.

• Structural Materials

The "DH Holder (DIN Rail Compatible Noise Filter Mounting Base)" is a product manufactured by Shinohara Electric that can be mounted on a DIN rail and used as an auxiliary mounting bracket for noise filters. By simply tightening one fixing screw, it can be secured at any position on the DIN rail, eliminating the need for direct attachment to the back panel. The mounting screws are flat-head screws, ensuring a flat mounting surface. To facilitate easy installation of noise filters, it is pre-tapped. Additionally, it can also accommodate Shinohara's push button mounting bases (PBK series). 【Features】 ■ Can be secured at any position on the DIN rail ■ No need for direct attachment to the back panel ■ Uses flat-head screws for mounting ■ Pre-tapped for easy installation ■ Compatible with Shinohara's push button mounting bases (PBK series) *For more details, please refer to the PDF document or feel free to contact us.

• Structural Materials

The "DH Holder (Switch Mount Type)" is a product used in combination with the switch mounting brackets "TK-30," "TK-30-6.5," and "TK-30-16.5" manufactured by Shinohara Electric to mount toggle switches and volume controls onto DIN rails made by Shinohara Electric. It can be fixed at any position on the DIN rail by simply tightening one fixing screw. Additionally, it uses flat head screws for the mounting screws (with countersunk holes), making the mounting surface flat. Furthermore, it has been tapped to allow for easy installation of the switch mounting brackets. 【Features】 ■ Compatible brackets: Shinohara Electric switch mounting brackets TK-30, TK-30-6.5, and TK-30-16.5 ■ Can be fixed at any position on the DIN rail ■ Tapped for easy installation ■ Uses flat head screws for mounting *For more details, please refer to the PDF materials or feel free to contact us.

• Structural Materials

The "DH Holder (Blank Type)" is an auxiliary bracket that can be mounted on a DIN rail made by Shinohara Electric, allowing customers to perform custom tap hole processing to attach various devices. It is designed to accommodate tap holes and round holes according to the breakers, devices, and brackets used, and is manufactured with a thickness of 2.3mm to ensure that screw threads can be secured without the need for barrelling. It can be fixed at any position on the DIN rail by simply tightening one fixing screw, eliminating the need for direct attachment to the middle plate. Countersunk screws are used for the mounting screws (with countersunk holes), making the mounting surface flat. 【Features】 - Custom hole processing can be done to match the breakers, devices, and brackets used. - Manufactured with a thickness of 2.3mm to ensure screw threads can be secured. - No need for direct attachment to the middle plate. - Countersunk screws are used for the mounting screws. *For more details, please refer to the PDF document or feel free to contact us.

• Structural Materials

The "DH Holder (Socket Mounting Type)" is an auxiliary mounting bracket for sockets that is used by attaching it to a DIN rail made by Shinohara Electric. 【Features】 1. It now supports the installation of Panasonic and Meiko Electric tumbler switches (only DH-5050TS). 2. It can be fixed at any position on the DIN rail by simply tightening one fixing screw. 3. It uses flat head screws for the mounting screws (with countersunk holes), making the mounting surface flat. 4. It has been pre-processed for easy socket installation. 5. In addition to socket mounting, we can also perform additional processing to allow for the installation of noise filters, etc., upon request. *For more details, please refer to the PDF document or feel free to contact us.

• Structural Materials

The "DH Holder (DIN Rail Mounting Bracket)" is a product used for mounting wiring ducts, terminal blocks, and terminal plates on DIN rails manufactured by Shinohara Electric. It can be securely fixed at any position on the DIN rail simply by tightening two fixing screws. Equipment can be easily mounted using screws (4 locations, M4 threaded). Additionally, it can also serve as a fastening bracket for terminal blocks, relays, etc. 【Features】 ■ One-sided mounting type: S type ■ Both-sided mounting type: RL type ■ Equipment can be easily mounted with screws ■ Can also be used as a fastening bracket for terminal blocks, relays, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Structural Materials

Please use it as a cover (finger guard) to protect the charging part of sockets such as relays, in combination with the manufacturer-made DH holder (compatible with protective cover installation). 【Specifications】 ■ Material: Transparent PVC ■ Packaging quantity: 10 pieces ■ Sales unit: 10 pieces *For more details, please refer to the PDF document or feel free to contact us.

• Structural Materials

The "DIN Rail Cutter" is a product used for cutting our aluminum DIN rails. The "Premium DIN Rail Cutter" allows for easy cutting with less than half the force required by conventional products. 【Features】 ■ Easy cutting with less than half the force of conventional products ■ Significant increase in work efficiency ■ Substantial reduction in work costs ■ No power supply needed and operates silently ■ No need for deburring the cut surface (LHC-LC) *For more details, please refer to the PDF document or feel free to contact us.

• Structural Materials

The "End Cap for DIN Rail" is a terminal protection cap for "DIN Rail" manufactured by Shinohara Electric. 【Features】 ■ Prevents injuries caused by burrs on cut surfaces, enhancing safety. ■ Eliminates the need for processing cut surfaces, improving work efficiency. *For more details, please refer to the PDF document or feel free to contact us.

• Structural Materials

"DIN rail" is a mounting bracket for equipment that conforms to the DIN standard and has a width of 35mm. It complies with the JIS-C-2812 standard. Terminal blocks, sockets, electronic devices, and any mounting equipment that is DIN and 35mm wide can be installed at any position. It is also easy to remove. Additionally, we offer steel DIN rails, DIN rails of 15mm height type, and end caps for DIN rails that prevent injuries. 【Features】 ■ Complies with JIS-C-2812 standard ■ Can be installed at any position ■ Easy to remove ■ Suitable for mounting large equipment (15mm height type) ■ End caps to prevent injuries are also available ■ We also accept custom cutting of DIN rail dimensions. *For more details, please refer to the PDF document or feel free to contact us.

• Structural Materials

"Freenut" is a mounting nut that can be easily attached from the surface side of the "free circuit board" with a single touch. All equipment installation can be done from the front side without having to reach around to the back. It is finished with environmentally friendly trivalent chromate treatment on electro-galvanized steel. 【Features】 ■ One-touch attachment ■ Can be done from the surface side ■ Environmentally friendly electro-galvanized trivalent chromate finish *For more details, please refer to the PDF document or feel free to contact us.

• Structural Materials
• Terminal board/equipment storage rack
• Reinforcement and repair materials

The "Free Baseboard" is a mounting plate for mid-plates such as distribution and control panels, as well as other equipment. Since equipment can be installed using only the distribution diagram, the sheet metal drawings for mid-plates can be omitted. It can be manufactured according to design dimensions, and when changes or expansions occur, you only need to add this product without the need for drilling or other modifications. Furthermore, assembly wiring can be done in a separate process from the outer casing, which helps shorten delivery times. 【Features】 ■ Can be manufactured according to design dimensions ■ Equipment can be installed using only the distribution diagram ■ No need for drilling or other modifications during changes or expansions ■ Assembly wiring can be done in a separate process from the outer casing ■ Helps shorten delivery times *For more details, please refer to the PDF materials or feel free to contact us.

• Structural Materials
• Power distribution and control panels
• Terminal board/equipment storage rack

The "Cooling Fan Mounting Base" is used as a fan mounting frame for directly cooling internal equipment such as sequencers, capacitors, heat sinks, transformers, and resistors. It is easy to install, eliminating the need for conventional in-house processing, thereby reducing labor. 【Features】 ■ Easy to install ■ No in-house processing required ■ Labor-saving ■ Made of 2.3mm thick steel plate *For more details, please refer to the PDF document or feel free to contact us.

• Structural Materials
• Power distribution and control panels
• Secondary steel products

The "DC Power Supply Mounting Base" is used as a mounting base for DC power supply devices inside the panel. No processing of mounting holes is required. It is finished with environmentally friendly trivalent chromate treatment on electro-galvanized steel. 【Features】 ■ Steel plate t = 1.6mm ■ No processing of mounting holes required ■ Environmentally friendly trivalent chromate plated product *For more details, please refer to the PDF document or feel free to contact us.

• Structural Materials
• DC Power Supply

The "Terminal Block Mounting Bracket for Fans" is a wiring component for ventilation fans. Since it is fastened together with the fan, additional hole processing for terminal block installation is unnecessary. This significantly reduces labor costs and streamlines the installation of the terminal block. 【Features】 ■ Significant reduction in labor costs ■ Streamlining of terminal block installation ■ No additional hole processing for terminal block installation required *For more details, please refer to the PDF document or feel free to contact us.

• Structural Materials
• Secondary steel products
• Terminal board/equipment storage rack

The "Slide-type Breaker Mounting Base (for Main Breakers)" is a structural material for use as a mounting frame for main breakers. Since it is slide-type, it can be adjusted to any desired height. Additionally, we offer a total of 15 different sizes to accommodate breakers ranging from 50AF to 400AF. 【Features】 ■ Adjustable to any height with a slide mechanism ■ Compatible with breakers from 50AF to 400AF ■ Available in a total of 15 sizes ■ Made of steel plate with electric zinc plating and trivalent chromate finish *For more details, please refer to the PDF materials or feel free to contact us.

• Structural Materials

【Features】 ■ There is no need to drill new holes or tap for additions, modifications, or changes inside distribution boards, etc. ■ Taps (AH-4, 5, 6) are installed in two directions, allowing for flexible mounting of parts and equipment. ■ It can also be used for wiring and piping in the steel structure of electrical construction. *For more details, please refer to the PDF document or feel free to contact us.

• Structural Materials
• Wiring devices
• Reinforcement and repair materials

Our "assembly hardware" is designed to fit the dimensions of the "ABC channel," making assembly easy with just a bolt tightening. The material is made of steel plate with a trivalent chrome electro-galvanized finish. *For more details, please refer to the PDF document or feel free to contact us.

• Structural Materials

The "Spacer" is a structural material suitable for reinforcing the "ABC Channel" or as a color during equipment installation. It is processed from steel pipes and finished with electro-galvanized trivalent chromate treatment. Please use it for reinforcing the space when tightening the "ABC Channel." 【Features】 It is optimal for reinforcing the "ABC Channel" or as a color during equipment installation. 【Material】 Processed from steel pipes, finished with electro-galvanized trivalent chromate treatment. *For more details, please refer to the PDF document or feel free to contact us.

• Structural Materials

"FRP Insulated Structural Materials (Angle, Channel, Square Pipe)" are structural materials made by combining fiberglass as a reinforcing base material with thermosetting resin. They possess insulation and strength that cannot be achieved with ordinary plastics. They can be easily cut, drilled, and processed, making them widely usable as insulated structural materials. [Features] - Fiberglass as the reinforcing base material - Structural materials combined with thermosetting resin - Excellent insulation and strength - Easy to cut, drill, and process *For more details, please refer to the PDF document or feel free to contact us.

• Structural Materials

The "Channel End Cap" is a terminal protection cap for the "ABC Channel" manufactured by Shinohara Electric. It prevents injuries caused by burrs on cut surfaces, enhancing safety. Additionally, since processing of the cut surface is unnecessary, work efficiency can be improved. Furthermore, two new types have been added: a trivalent chromate finish and a gray type that blends well with stainless steel. [Features] ■ Prevents injuries in advance ■ No processing of cut surfaces required ■ Improves work efficiency ■ Available in trivalent chromate finish and gray type *For more details, please refer to the PDF document or feel free to contact us.

• Structural Materials

The "ABC Channel (ZAM manufactured)" is a structural material for panels that offers excellent scratch resistance and high corrosion resistance against bending and cutting processes. It features performance that surpasses conventional hot-dip galvanized coatings due to its zinc-aluminum-magnesium coating layer. Additionally, it is an environmentally friendly chromium-free product (compliant with RoHS). Please use it as a supporting material for the installation of equipment, ducts, electrical wires, busbars, piping, etc. 【Features】 ■ Performance that surpasses conventional hot-dip galvanizing ■ Excellent scratch resistance ■ High corrosion resistance against bending and cutting processes ■ Environmentally friendly chromium-free product (compliant with RoHS) ■ Made from "ZAM" material that exhibits excellent corrosion resistance *For more details, please refer to the PDF document or feel free to contact us.

• Structural Materials

The "ABC Channel (CL)" is a structural material for panels such as distribution boards, control panels, operation panels, and cubicles. It can be installed without drilling holes in equipment or components, and by using this product, you can omit the middle plate, thereby reducing the number of processes. Please use it as support hardware for mounting equipment, ducts, wires, busbars, piping, etc. 【Features】 ■ Design changes, expansions, and modifications are flexible ■ Shortened delivery times can be achieved ■ Assembly and wiring can be done without waiting for the completion of the enclosure ■ Easy-to-use ABC parts are available, which can improve efficiency *For more details, please refer to the PDF materials or feel free to contact us.

• Structural Materials

The "ABC Channel (CC)" is a structural material for panels such as distribution boards, control panels, operation panels, and cubicles. It can be installed without drilling holes in equipment or parts, and by using this product, the middle plate can be omitted, reducing the number of processes. Please use it as a support hardware for mounting equipment, ducts, wires, busbars, and piping. 【Features】 ■ Design changes, expansions, and modifications are completely flexible ■ Shortened delivery times can be achieved ■ Assembly wiring can be done without waiting for the completion of the enclosure ■ Easy-to-use ABC parts are available, improving efficiency *For more details, please refer to the PDF materials or feel free to contact us.

• Structural Materials

The "ABC Channel (Flat Bar)" is a structural material for panels such as distribution boards, sub-distribution boards, control panels, operation panels, and cubicles. It can be installed without drilling holes in equipment or components, and by using this product, the middle plate can be omitted, reducing the number of processes. Please use it as a supporting hardware for mounting equipment, ducts, electrical wires, busbars, piping, etc. 【Features】 ■ Design changes, expansions, and modifications are completely flexible ■ Shorter delivery times can be achieved ■ Assembly wiring can be done without waiting for the completion of the enclosure ■ Easy-to-use ABC parts are available, improving efficiency *For more details, please refer to the PDF materials or feel free to contact us.

• Structural Materials

"ABC Channel (Channel)" is a structural material for panels such as distribution boards, control panels, operation panels, and cubicles. It can be installed without drilling holes in equipment or parts, and by using this product, the middle plate can be omitted, reducing the number of processes. Please use it as support hardware for mounting equipment, ducts, wires, busbars, piping, etc. 【Features】 ■ Design changes, expansions, and modifications are completely flexible ■ Shorter delivery times can be achieved ■ Assembly wiring can be done without waiting for the completion of the enclosure ■ Easy-to-use ABC parts are available, improving efficiency *For more details, please refer to the PDF materials or feel free to contact us.

• Structural Materials

"ABC Channel (Angle)" is a structural material for panels such as distribution boards, control panels, operation panels, and cubicles. It can be installed without drilling holes in the equipment or parts, and by using this product, the middle plate can be omitted, reducing the number of processes. Please use it as support hardware for mounting equipment, ducts, wires, busbars, piping, etc. 【Features】 ■ Design changes, expansions, and modifications are completely flexible ■ Delivery times can be shortened ■ Assembly wiring can be done without waiting for the completion of the enclosure ■ Easy-to-use ABC parts are available, improving efficiency *For more details, please refer to the PDF materials or feel free to contact us.

• Structural Materials

【Features】 【Compatibility】The mounting pitch is suitable for switching from 10W and 20W fluorescent lamps, measuring 280mm/538mm. 【Lightweight】It is lightweight because it does not use metal or glass, making it safe against transportation vibrations and installation shocks. 【Compact】With a small and simple design, it helps save space inside the panel. 【Voltage Resistance】It has a voltage resistance performance of AC2000V/min, suitable for use inside panels. 【Energy Saving】The power consumption is about half compared to conventional fluorescent lamps. 【ECO】It is a clean lighting solution that does not use mercury. 【Low Heat Generation】It does not get as hot as fluorescent lamps, ensuring safety. 【Insect Repellent】It emits very little ultraviolet light, preventing pests from being attracted to the panel and its surroundings, thus blocking their intrusion. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Fluorescent Light Type

This catalog features a wide range of gas detectors manufactured by Honeywell, which are handled by Shinohara Electric. We offer a rich lineup of high-performance portable volatile organic compound (VOC) monitors, including the "ppbRAE 3000," as well as the "MiniRAE 3000" and "ToxiRAEPro PID." Our company is equipped to respond to technical requests such as repairs and maintenance. 【Contents】 ■ PID ■ Combined Gas + PID ■ Combined Gas ■ Single Gas ■ Fixed Gas Detectors ■ Automatic Inspection and Calibration Equipment ■ Protective Clothing and Harnesses, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• others

Introducing the single gas detector "ToxiRAE Pro Series" handled by Shinohara Electric. The "ToxiRAE Pro LEL" quickly detects combustible gases and accurately measures the concentration from 0 to 100% LEL until it reaches the LEL. It contains CF values for 55 types of combustible gases and can be programmed to automatically display the %LEL equivalent of the specified combustible gas by the user. Additionally, we offer the "ToxiRAE Pro CO2," which quickly detects carbon dioxide up to 50,000 ppm in 100 ppm increments. 【Features】 <ToxiRAE Pro LEL> ■ Quickly detects combustible gases ■ Accurately measures the concentration from 0 to 100% LEL until it reaches the LEL ■ Automatically displays the %LEL equivalent of the specified combustible gas by the user ■ Standard data logging function *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• others

The QRAE3 is a compact, fully functional gas detector. It can simultaneously detect hydrogen sulfide, carbon dioxide, oxygen, and combustible gases with 1 to 4 sensors. It is capable of monitoring combustible gases, oxygen, and 8 types of toxic gases. Additionally, it features long-life sensor technology (LEL, O2, CO, H2S). 【Features】 ■ Compact multi-gas detector compatible with H2S, SO2, O2, and combustible gases ■ Dust and waterproof ■ Prevents contact failure due to dust ■ Operating temperature (-20 to 50°C) ■ Loud alarm, red flashlight, and vibration for warnings *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• others

The "MAX XT2" is a compact, easy-to-handle, and highly reliable gas detector that incorporates a sampling pump. With simple one-touch button operation, it can simultaneously detect up to four types of gases (hydrogen sulfide, carbon monoxide, oxygen, and combustible gases). Thanks to the built-in pump and an easy-to-connect tube system, it can monitor locations up to 23 meters away. 【Features】 ■ Compact multi-gas detector (suction type) compatible with H2S, CO, O2, and combustible gases ■ Compact and lightweight ■ User-friendly operation with simple one-touch button ■ Quick filter status check via pump filter window, allowing for on-site replacement *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• others

The "Micro5 Series" is a multi-gas detector capable of simultaneously detecting up to five types of gases, including flammable gases, oxygen, carbon dioxide, and toxic gases. The "Micro5 IR" model can detect carbon dioxide gas using an NDIR sensor. 【Features】 ■ Equipped with data logging function; log data can be saved to an SD card or multimedia card (MMC). ■ Calibration and bump tests can be performed using maintenance equipment (MicroDock2). *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• others

The "RAEGuard2 PID" is a continuous operation stationary photoionization detector (PID) that operates on a 10 to 28 VDC power supply. It provides analog (4-20 mA) signal output with three full-scale ranges equivalent to 100 ppm or 1000 ppm of isobutylene gas. It can be used in various applications, including petroleum refining, petrochemicals, natural gas plants, steelmaking, chemicals, and pharmaceuticals. 【Features】 ■ Equipped with function keys for local digital display of gas concentration and calibration ■ Explosion-proof housing suitable for hazardous locations ■ Long-life 10.6 eV ultraviolet lamp and 3D sensor ■ Built-in pump with patented self-cleaning duty cycle feature ■ Local display with adjustment key *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments
• others

The "ToxiRAE Pro PID" is a pocket-sized photoionization detector (PID) that can be equipped with data logging capabilities. Its compact size allows for continuous and instantaneous monitoring of volatile organic compounds (VOCs) for up to 12 hours. Additionally, it can accurately measure many ionic chemical substances thanks to 190 built-in correction factors and over 300 manufacturer-published correction factors. 【Features】 ■ Improved resolution!! ■ Acquired domestic explosion-proof certification ■ Compact and lightweight ■ Can be carried in a pocket during work shifts ■ Easily disassembled for maintenance in a short time without tools ■ Large keys that can be operated while wearing gloves *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• others

The "MiniRAE 3000+" is a high-performance portable volatile organic compound (VOC) monitor. With an extended measurement range of 0 to 15,000 ppm, it is ideal for various applications from occupational health to gas leak detection and HazMat. Thanks to RAE Systems' integrated correction factor list, which covers over 300 compounds, it can measure a wide range of chemicals. 【Features】 ■ Proven PID (Photoionization Detection) technology ■ 3-second response time ■ Humidity correction through integrated humidity and temperature sensors ■ Supports 12 languages, including Japanese ■ Waterproof, dustproof, and explosion-proof design *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• others

The "ppbRAE 3000+" is a high-performance portable volatile organic compound (VOC) monitor. With an extended measurement range of 1 ppb to 10,000 ppm, it is ideal for various applications from HazMat/homeland security and occupational health to indoor air quality and military use. Thanks to RAE Systems' integrated correction factor list, which accommodates over 300 compounds, it can measure a wide range of chemicals. 【Features】 ■ Proven PID (Photoionization Detection) technology ■ 3-second response time ■ Humidity correction through integrated humidity and temperature sensors ■ Supports 12 languages, including Japanese ■ Waterproof, dustproof, and explosion-proof design *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• others

This is a non-combustible sheet material with a special formulation of PVC resin applied to a glass fiber base, and it is highly flexible, making inspection and maintenance easy. Additionally, branch lines from cable wiring or changes can be accessed from anywhere. It can be cut to any desired length, making it economical with no waste. 【Features】 1. By wrapping electrical wires with a hook tube and securing the hook, bundling tasks for cables and piping can be easily performed. 2. It is a non-combustible sheet material with a special formulation of PVC resin applied to a glass fiber base. 3. Its high flexibility allows for easy inspection and maintenance, and branch lines from cable wiring or changes can be accessed from anywhere. 4. It can be cut to any desired length, making it economical with no waste. 5. Due to its high weather resistance, it can be used outdoors. *Please avoid using it in environments where water can enter from the bundling area, as it is not a sealed structure. (Such as underwater use or in outdoor orientations where rainwater can enter.) *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

It can be used as a relay connector box for data communication with PLCs (programmable logic controllers) housed in control panels and similar equipment. With the front cover closed, it has an IP55 rating, preventing dust and water from entering the panel. Additionally, it employs a locking type outlet to prevent accidental disconnection of the power plug. Trial operation adjustments can be made without opening the doors of control panels and similar equipment. 【Features】 ■ Compliant with RoHS Directive ■ Dustproof and waterproof type IP55 ■ Access to internal mechanisms with miniB terminal connection ■ Uses a locking type outlet ■ Allows trial operation adjustments without opening the doors of control panels and similar equipment *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

A new model has been added to the open/close button cover! Thanks to its hinge design, operating buttons and switches is easy! You can choose from two sizes and two colors! 【Features】 1. Installation is done by securing it together with the button or switch, so it won't fall off when opening or closing the cover. 2. It is compatible with buttons and switches with a diameter of approximately φ40 and a projection of about 30mm from the panel. 3. Depending on the intended use, you can differentiate by cover color. (Available in two colors: translucent white and translucent red) *For more details, please refer to the PDF document or feel free to contact us.

• Work tools