篠原電機 List of Products and Services

"Sumitube" is a heat-shrinkable tube that does not contain "chlorine and chlorine compounds," which raises concerns about the generation of toxic gases during incomplete combustion. It has excellent heat resistance and can suppress the occurrence of cracking, holes, and tube displacement even during abnormal heating or when molten solder adheres to it. Additionally, it possesses moderate flexibility and has a small length change rate, resulting in a uniformly finished appearance after coating. 【Features】 ■ Does not contain chlorine and chlorine compounds ■ Excellent heat resistance ■ Moderate flexibility ■ Small length change rate ■ Uniform appearance after coating *For more details, please refer to the PDF document or feel free to contact us.

• others

"Nishi Tube" is a heat-shrinkable tube that does not corrode metal even when in contact with it. It has flexibility and elasticity, and excels in cold resistance, heat resistance, weather resistance, ozone resistance, and chemical resistance (especially acid and alkali resistance). Additionally, it comes in a wide range of sizes, making it suitable for various applications. 【Features】 ■ Has flexibility and elasticity ■ Excellent cold resistance, usable in environments as low as -50°C ■ Excellent heat resistance, can be used continuously at 80°C ■ Outstanding weather resistance and ozone resistance ■ Excellent chemical resistance (especially acid and alkali) *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Hishi Tube VW (CE)" is a flame-retardant polyvinyl chloride heat shrinkable tube certified to the UL-224 VW-1 standard. It is suitable for use as an exterior for aluminum electrolytic capacitors, as well as for protecting electronic components and secondary batteries, and for insulation purposes. Additionally, we also offer the "Hishi Tube IE (General Tube)," which is a soft polyvinyl chloride heat shrinkable tube. 【Features】 ■ Flame-retardant ■ Certified to UL-224 VW-1 standard *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Heat Shrink Shield Tube" is an insulating and shrinkable tube that can be used for the shielding of signal cables. The processing temperature is 105°C, 300V. We offer sizes (before shrinkage) ranging from φ3.8 to 17.8mm. 【Lineup】 ■G-6011 ■G-6012 ■G-6013 ■G-6014 ■G-6015 ■G-6016 ■G-6017 ■G-6018 *For more details, please refer to the PDF document or feel free to contact us.

• others

The Wrap Round Sleeve (CRSM) is an insulating and shrink tube. It can be used for repairing damages to cables, wires, and sheaths, as well as for protecting and preventing corrosion of pipes, and for protecting and waterproofing branching points of cables and wires. 【Lineup】 ■ CRSM 34/10-1500/239 ■ CRSM 53/13-1500/239 ■ CRSM 84/20-1500/239 ■ CRSM 107/29-1500/239 ■ CRSM 143/36-1500/239 ■ CRSM 198/55-1500/239 ■ CRSM 250/98-1500/239 *For more details, please refer to the PDF document or feel free to contact us.

• others

"Heat shrinkable branching tubes" are insulating shrink tubes. Our company offers three types: bifurcated tubes, trifurcated tubes, and quadrifurcated tubes. 【Product lineup (excerpt)】 ■ Bifurcated tubes 　・302K 333/S 　・302K 224/S 　・302K 446/S ■ Trifurcated tubes 　・402W533/S 　・402W516/S 　・402W526/S ■ Quadrifurcated tubes 　・502S 012/S 　・502K 033/S 　・502K 046/S, etc. *For more details, please refer to the PDF document or feel free to contact us.

• others

Insulation, protection, and waterproofing for low-voltage various wires/cable connection parts are possible. It is also useful for protecting and waterproofing connectors, underground buried parts, and underwater submerged parts. 【Lineup (excerpt)】 ■MWTM 10/3-1000/S ■MWTM 16/5-1000/S ■MWTM 25/8-1000/S ■MWTM 35/12-1000/S ■MWTM 50/16-1000/S ■MWTM 63/19-1000/S ■MWTM 75/22-1500/S ■MWTM 85/25-1500/S, etc. *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Shield Window" is an EMI protection product. The shielding effect is 40dB at 100MHz, and the visible light transmittance is 80%. The operating temperature for this product is up to 85°C. 【Material Selection】 ■ Transparent Sheet: Acrylic Plate ■ Conductive Mesh: Synthetic Fiber ■ Busbar Treatment: Silver Paste *For more details, please refer to the PDF document or feel free to contact us.

• others

"Conductive tape" exhibits high shielding effectiveness due to the use of conductive adhesive. We offer three types of tape: "conductive fabric tape," "metal foil tape," and "double-sided adhesive tape." You can choose according to your application. 【Lineup】 ■T217 ■T3186 ■T254 ■T-8250 ■T3165 ■T-9116 *For more details, please refer to the PDF document or feel free to contact us.

• others

The double-sided adhesive tape for electron microscopes is an EMI countermeasure product. By using this product, you can ignore the background. Please use it for attaching samples in electron microscopes. [Features] ■ Ignores background ■ Usable for sample attachment *For more details, please refer to the PDF document or feel free to contact us.

• others

This product is designed for EMI countermeasures. It uses soft magnetic materials with high permeability, low coercivity, and low loss. It has excellent flexibility. Additionally, cutting it with scissors or similar tools does not significantly reduce its performance. Furthermore, it can be soldered on the surface. 【Features】 ■ High permeability, low coercivity, low loss ■ Uses soft magnetic materials ■ Excellent flexibility ■ Minimal performance degradation when cut with scissors or similar tools ■ Solderable on the surface *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Spiral Spring Gasket" is an EMI countermeasure product made from heat-treated beryllium copper and stainless steel to exhibit excellent elasticity. Core material insertion is possible. We offer a wide lineup with diameters ranging from 0.90 to 10.0 mm. 【Features】 ■ Made from heat-treated beryllium copper and stainless steel ■ Core material insertion is possible *For more details, please refer to the PDF document or feel free to contact us.

• others

EMI countermeasure product "Wire Mesh Gasket." The standard wire type is "SUS316," but we can also accommodate custom options such as tin-copper wire. Additionally, we offer a tape type "Wire Mesh Tape" in our lineup. 【Features】 ■EMI countermeasure ■Custom options available (such as tin-copper wire) *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Conductive Fabric Shielding Gasket" is an EMI countermeasure product for control panels, office automation equipment, computers and peripheral devices, wireless devices, medical equipment, and other electronic applications. It is manufactured with a special structure and uses high-performance urethane foam as the core material, resulting in a soft surface pressure while maintaining very high resilience, keeping the contact resistance low even after prolonged compression. It can be die-cut to the desired length, reattached to a different release paper, and cut to the necessary length (array method) or processed by punching. 【Features】 ■ Manufactured with a special structure ■ Uses high-performance urethane foam as the core material ■ Soft surface pressure ■ Very high resilience *For more details, please refer to the PDF document or feel free to contact us.

• others

"Clip Finger" is a shielding material that is useful in high-temperature environments or when double-sided adhesive tape cannot be used. We offer six different sizes. The length is 406.4mm (16"). 【Lineup (excerpt)】 ■97-604 ■97-605 ■97-606 ■97-607 ■97-610 *For more details, please refer to the PDF document or feel free to contact us.

• others

"Big Finger" is suitable as RFI/EMI shielding material for the door and movable parts of shield rooms, computers, and communication equipment. Additionally, the wiping effect during opening and closing (mechanically rubbing and activating the metal surface) ensures that conductivity is always maintained, and it is designed to withstand any compression force. Furthermore, it has a significant attenuation effect and exceptional durability. Attenuation has been measured through testing. [Features] - RFI/EMI shielding material - Maintains conductivity through the wiping effect - Designed to withstand any compression force - Significant attenuation effect - Exceptional durability *For more details, please refer to the PDF document or feel free to contact us.

• others

"Step Finger" is a finger-type shielding material made of high-quality beryllium copper. It comes with double-sided adhesive tape on the back. It is mainly used for metal cabinets and electronic enclosures, and can be easily and securely installed, especially in situations where space is limited. [Features] - EMI (Electromagnetic Interference) prevention - Made with high-quality beryllium copper - Double-sided adhesive tape on the back - Can be easily and securely installed in limited spaces *For more details, please refer to the PDF document or feel free to contact us.

• others

The "soft gasket" can be easily attached to enclosures and other surfaces using adhesive tape. The conductive fabric-wrapped urethane foam gasket section uses L94V-0 certified materials. The adhesive tape is UL94 VTM-0 certified. It can be easily cut with scissors. Please inquire about special processing. 【Features】 ■ Ensures stable conductivity with low compression force ■ Can be easily attached to enclosures and other surfaces ■ The gasket section uses L94V-0 certified materials ■ The adhesive tape is UL94 VTM-0 certified ■ Can be easily cut with scissors *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Inset Packing" handled by Shinohara Electric is excellent in waterproofing and is particularly suitable for drainage packing. 【Features】 1. By using it at the opening of the distribution box, complicated drainage panel work becomes unnecessary. 2. It can be easily installed by simply pushing it into the panel edge, thereby improving work efficiency. 3. There are two types available: one for vertical panel edges (without drainage structure) and one for horizontal panel edges (with drainage structure), allowing you to use it according to your needs. *For more details, please refer to the PDF document or feel free to contact us.*

• others

The "groove rubber" is a packing that can be used to protect the openings of various enclosures. Starting with "RP-MB," which can be commonly used for plate thicknesses of 1.6 to 3.2 mm due to its internal groove, we also offer "RP-MB-15," which protects the cross-section of plates with a thickness of 1.6 to 3.2 mm, and "RP-KE," which has a high holding power due to its internal core and can be commonly used for plate thicknesses of 0.8 to 2.3 mm. 【Features】 ■ RP-MB: Can be commonly used for plate thicknesses of 1.6 to 3.2 mm due to its internal groove. ■ RP-MB-15: Can protect the cross-section of plates with a thickness of 1.6 to 3.2 mm. ■ RP-KE: Has a high holding power due to its internal core and can be commonly used for plate thicknesses of 0.8 to 2.3 mm. *For more details, please refer to the PDF document or feel free to contact us.

• others

【Features】 1. Excellent weather resistance, oil resistance, chemical resistance, cold resistance, and thermal stability. 2. Flexural fatigue strength, aging resistance, and ozone resistance are several times greater than that of rubber. *For more details, please refer to the PDF document or feel free to contact us.

• others

【Features】 Excellent heat resistance, cold resistance, oil resistance, weather resistance, and chemical resistance. *For more details, please refer to the PDF document or feel free to contact us.*

• others

【Features】 1. It has excellent elasticity, water resistance, and dust resistance. 2. It has a dual structure of sponge and hard rubber, allowing for easy straight application without the need for traditional guides or other means to prevent waviness. *For more details, please refer to the PDF document or feel free to contact us.

• others

The foam section is flame-retardant, elastic, and highly durable. We offer a lineup including "D sponge" with a hardness of approximately 25°, "SD sponge" with a hardness of approximately 20°, and "SS sponge" with a hardness of approximately 10°. 【Features】 The foam section is flame-retardant, elastic, and highly durable. *For more details, please refer to the PDF document or feel free to contact us.

• others

It comes with adhesive material (double-sided tape), so you can simply stick it directly to the area you want to protect from scratches, eliminating the need to bend thin plates and prepare protective fittings as in the past. 【Features】 ■ Since it comes with adhesive (double-sided tape), you can simply stick it directly to the area you want to protect from scratches, without the need to bend thin plates and prepare protective fittings as before! ■ It can protect the board from scratches caused by fasteners and rods. ◇ 200 sheets roll product ■ It comes in a roll, making it very convenient for storage. Additionally, the product can be easily peeled off from the separator (release material), improving work efficiency. ◇ Thick type ■ It has a thickness of 1.5 times that of conventional products (PS-5070) (60μm) and approximately 5 times the abrasion resistance! ■ With a large size (80mm x 80mm), it can protect a wider area! *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Repair Sheet Roll Type RS-W50L20" handled by Shinohara Electric is an adhesive sheet for indoor panels that matches the paint color of the panel. It allows for easy repairs by applying it over scratches and peeling on the painted surface. It can also be used to protect cut edges. 【Features】 ■ An adhesive sheet that matches the paint color of the panel (width 50mm, length 20m). ■ Allows for easy repairs by applying it over scratches and peeling on the painted surface. It can also be used to protect cut edges. *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Repair Sheet Round" handled by Shinohara Electric is a seal that can be used for simple repairs of unnecessary screw holes on the painted surface of existing panels due to design changes or processing errors. Since it is round, it allows for easy repair of screw holes. 【Features】 - It comes in three colors that match the panel's paint: 5Y7/1, 2.5Y9/1, and 2.5Y8/2. - Being round, it can easily repair screw holes ranging from M3 to M12. - The seal in 3.6Y6/0.5 color (silver gray) is less noticeable on steel plate surfaces. *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Repair Sheet" handled by Shinohara Electric is an adhesive sheet that matches the paint color of the panel. By applying it over scratches or peeling on the painted surface, simple repairs can be made. It can also be used to protect cut edges. 【Features】 ■ Adhesive sheet that matches the paint color of the panel ■ Simple repairs can be made by applying it over scratches or peeling on the painted surface ■ Can also be used to protect cut edges *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Solar Power Generation Equipment Display Label" is a label that indicates the installation of solar power generation equipment at building entrances, aimed at raising awareness of the risk of electric shock during firefighting activities in the event of a fire. It is produced in accordance with the guidelines of the Tokyo Fire Department. 【Features】 ■ Produced in accordance with the guidelines of the Tokyo Fire Department ■ Indicates the installation of solar power generation equipment at building entrances ■ Aims to raise awareness of the risk of electric shock during firefighting activities in the event of a fire *For more details, please refer to the PDF document or feel free to contact us.

• others

At Shinohara Electric, we handle "Fire and Hazardous Material Signboards." Starting with the "Hazardous Area Room Sign," we offer a wide lineup of "Fire Signage" recommended by the Japan Fire Sign Industry Association. We have hard vinyl, surface printed types, and laminated types available. 【Lineup】 < Hazardous Area Room Signs > ■ Hazard G11: Pump Room ■ Hazard G12: Boiler Room ■ Hazard G13: Electrical Room ■ Hazard G14: Mechanical Room, etc. *For more details, please refer to the PDF materials or feel free to contact us.

• others

**Features** <Irreversibility> 1. High precision while being low cost. 2. Reversible and combination types are also available. <Combination Type of Reversible + Irreversible / Reversible Type> 1. Environmentally friendly materials (paraffin wax, PET-based film) are used. 2. High precision (±2℃), fast response (as fast as 2 seconds to start color change), and high durability (over 6 years of weather resistance for outdoor use). *For more details, please refer to the PDF document or feel free to contact us.*

• others

The "Thermo Marker 80 TM080RY" is a marker that allows for simultaneous checking of connection points and temperature management, enabling efficient work. It begins to change color at temperatures above 65°C, and at temperatures above 80°C, the color change is locked and will not revert in normal environmental temperatures. Therefore, even during inspections when the power is off, you can identify areas that have exceeded 80°C. It can be used on surfaces such as screw heads and copper bars, and can also serve as a substitute for temperature indication seals. 【Features】 ■ Simultaneous checking of connection points and temperature management ■ Irreversible type ■ Usable on surfaces such as screw heads and copper bars ■ Can be used as a substitute for temperature indication seals *For more details, please refer to the PDF document or feel free to contact us.

• Other store equipment and supplies

The "Card Holder (Continuous Type) CH-D" is an integrated design, allowing for significant labor savings in the application process compared to traditional individual piece card holders. It can be freely cut along the welded sections for use. 【Features】 ■ Integrated design enables significant labor savings in the application process ■ Can be freely cut along the welded sections ■ Holds 40 pieces of card per sheet ■ Compatible card size: 19mm x 39mm *For more details, please refer to the PDF document or feel free to contact us.

• Other store equipment and supplies

The "Card Holder (Adhesive Fixed Type with Screw Fixing)" has a strong double-sided adhesive tape on the back, providing very strong adhesion and eliminating the need for drilling holes and tapping. It does not corrode the adhesive surface. It is resistant to temperature and humidity, adapts well to slightly rough surfaces, and can also be used with screws. 【Features】 ■ Strong double-sided adhesive tape on the back provides very strong adhesion ■ Eliminates the need for drilling holes and tapping ■ Does not corrode the adhesive surface ■ Resistant to temperature and humidity, adapts well to slightly rough surfaces, and can also be used with screws *For more details, please refer to the PDF document or feel free to contact us.

• Other store equipment and supplies

At Shinohara Electric, we offer a wide range of installation supplies, including parts boxes, disc con hooks, and network wiring systems. The "Monitoring Window FIBOX" is a convenient monitoring window for inspecting and operating control panels and similar equipment. 【Features】 ■ Weak Acid: ○ ■ Gasoline: × ■ Strong Acid: × ■ Kerosene: ○ ■ Weak Alkali: ○ ■ Thinner: × ■ Strong Alkali: × ■ Carbon Tetrachloride: × ■ Alcohol: ○ ■ Cutting Oil: × ■ Benzene: × ■ Organic Solvents: × *For more details, please refer to the PDF document or feel free to contact us.

• Other store equipment and supplies
• others
• Terminal board/equipment storage rack

The "SS Bushing" can be used as an introduction bushing for the lock shaft that opens and closes the doors of distribution boards and similar equipment. 【Features】 1. When locking the door, the taper of the "bushing" smoothly guides the shaft into the lock hole. 2. It prevents noise caused by vibrations. 3. It eliminates paint peeling around the lock hole due to the opening and closing of the lock shaft, preventing rust formation. 4. The installation of the SS bushing is a one-touch process that simply requires pushing it in. *For more details, please refer to the PDF document or feel free to contact us.

• Other store equipment and supplies

The "Bracket for Mounting Protection Plates" can be used as a bracket (suspension device) for mounting protection plates (charging area protection barriers) inside cubicles and similar enclosures. 【Features】 1. The protection plate can be suspended, eliminating the need for troublesome processing such as daruma holes. 2. Since it is a suspension type, there is no need for complicated screw processing such as tapping on the panel side. (It can be attached with a single touch.) 3. Installation and removal are easy, improving work efficiency and reducing maintenance time for inspections and cleaning. 4. Since no mounting screws are required, there is no worry about losing screws during work, allowing for safe operations. 5. Products with insulated protection plates (barrier plates) can also be manufactured. Please specify the dimensions. *For more details, please refer to the PDF document or feel free to contact us.

• Other store equipment and supplies

The "Hook Rod Display Label" is a label that can be used to indicate storage on a panel equipped with a hook rod for operating circuit breakers. It has been laminated, making it suitable for outdoor use. The base material is transparent PET, so it blends well with the panel's paint color. It is based on the "Guidelines for Certification of Cubicle-Type Emergency Power Supply Receiving Equipment" published by the Japan Electric Association. 【Features】 ■ Display label based on the "Guidelines for Certification of Cubicle-Type Emergency Power Supply Receiving Equipment" published by the Japan Electric Association ■ Laminated for outdoor use ■ The base material is transparent PET, ensuring no discomfort with the panel's paint color *For more details, please refer to the PDF document or feel free to contact us.

• Other store equipment and supplies

We also offer a "holder and dish for hook rods" that can be used for the opening and closing operation of electrical circuit breakers. 【Features】 ■ For hook rods used in the opening and closing operation of electrical circuit breakers ■ Environmentally friendly, electro-galvanized, trivalent chromate treated product *For more details, please refer to the PDF document or feel free to contact us.

• Other store equipment and supplies

The "Disconnect Switch Hook Rod (Hook Rod for Operating Disconnect Switches)" can be used for the opening and closing operations of electrical circuit disconnect switches. 【Features】 1. Complies with JIS-C-4510 standards. 2. Made of plastic, it has excellent insulation properties and is non-absorbent. 3. Lightweight and easy to operate. 4. Uses a danger color yellow pipe. 5. With a pipe diameter of 32mm, it has excellent strength. * The FBK type has a longer hook section, making it easier to operate not only the opening and closing of the disconnect switch but also the cutout operations. * For more details, please refer to the PDF document or feel free to contact us.

• Other store equipment and supplies

"Decorative screws" can be used in distribution and control panels, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other store equipment and supplies

The "Parts Box" is a storage box for spare parts used in equipment such as distribution boards, control panels, and operation panels. Made of transparent plastic, the contents can be easily checked from the outside. The opening and closing mechanism is one-touch, making it easy to access spare parts. It becomes even more convenient when used in combination with a drawing holder. It can be attached with double-sided adhesive tape and can also be secured with screws. It is lightweight and there is no worry about it breaking. 【Features】 ■ Transparent plastic allows for easy visibility of contents from the outside ■ One-touch opening and closing makes it easy to access spare parts ■ Can be attached with double-sided adhesive tape and secured with screws ■ Lightweight with no risk of breaking *For more details, please refer to the PDF document or feel free to contact us.

• Other store equipment and supplies

【Features】 1. The earth wire is built into the plastic pipe, providing excellent insulation and safety. 2. The earth wire and clips at the bottom of the pipe are covered with an insulating tube, ensuring safe use. 3. It is lightweight and easy to operate. 4. It uses a yellow pipe, which is a warning color. *For more details, please refer to the PDF document or feel free to contact us.

• others

【Features】 ■Made to order (e.g., 5 units of AT-200) *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Low Voltage Branch Terminal Block" is a terminal block that can connect up to 7 branches as a low voltage branch terminal block. It has an insulation voltage of 2.5kV and a creepage distance of more than 20mm. 【Features】 ■ Can connect up to 7 branches as a low voltage branch terminal block (for 200A) ■ Insulation voltage of 2.5kV ■ Creepage distance of more than 20mm *For more details, please refer to the PDF document or feel free to contact us.

• others