篠原電機 List of Products and Services

The "Splash-proof Gallery IP45" is a product used for cubicles, distribution boards, etc., installed in harsh outdoor conditions exposed to wind and rain. 【Features】 1. There is no need to process large panels for ventilation holes as before. Please install this "Ventilation Gallery" as a component later. 2. The ventilation gallery and splash prevention cover are integrated, providing good waterproofing and a structure that withstands JIS C 0920 (splash-proof test). 3. There is also a stainless steel ventilation gallery available. *For more details, please refer to the PDF materials or feel free to contact us.*

• Subsidiary materials

The "Ventilation Gallery (made of steel or stainless steel)" is a product used as a ventilation component for operation panels, control panels, distribution boards, cubicles, etc. Since it eliminates the need for processing ventilation holes in panels as done traditionally, it significantly reduces labor. Additionally, installation is extremely simple; the product can be fitted into the panel hole from the front and secured with a backing frame using screws from the back. With accessories such as anti-blow-in covers, insect screens, and dust filters, specifications can be selected according to the application. Other options include "Corrosion-resistant specification IP41" and "Filter front replacement type G2-20FM (for indoor use)" among the lineup. 【Features】 ■ No need for processing ventilation holes in panels ■ Extremely easy installation ■ Specifications can be selected according to application with accessories ■ Usable outdoors with anti-blow-in cover (accessory) ■ Insect screens compliant with IPX2 are also available *For more details, please refer to the PDF materials or feel free to contact us.

• Subsidiary materials

The "Eco Duct (ED Series)" is a product that uses non-halogen resin, which does not emit harmful gases during incineration, with consideration for the environment. Its flame retardancy is self-extinguishing and certified to UL94V-0, and the ED duct has superior heat resistance compared to conventional PVC. Its specific gravity is approximately 20% lighter than PVC. It adopts the standard colors of the Japan Electrical Distribution Equipment Manufacturers' Association and the Japan Electrical Manufacturers' Association, and the side holes of the ED duct have a chamfered finish on the inner surface. 【Features】 ■ Environmentally friendly ■ No harmful gases emitted during incineration ■ Uses non-halogen resin ■ Self-extinguishing, UL94V-0 certified ■ Approximately 20% lighter than PVC *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials

The "Wiring Duct" from Shinohara Electric is a UL-certified product that meets the combustion test standards of the Japan Railway Vehicle Mechanics Association. In addition to the N type, which has no side holes (wiring outlet holes) or mounting holes, we offer various types of wiring outlet holes, including L type, C type, I type, and separator type. A duct cover is also included. 【Features】 ■ Complies with the combustion test of the Japan Railway Vehicle Mechanics Association ■ UL-certified product ■ Type N available with no side holes or mounting holes ■ Duct cover included *For more details, please refer to the PDF materials or feel free to contact us.

• Piping and electrical wiring materials

The "Cable Tie Fastener" is a product used as a fastener for cable ties. The material is made of 66 nylon in a milky white color. We offer three types of fasteners: A, B, and C. 【Features】 ■ Fastener for cable ties ■ Made of 66 nylon in milky white (UL-94, V-2) ■ Available in three types: A, B, and C ■ Packaging: 100 pieces per bag *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials

The "Wrapping Tube (Reversible Type)" is a product used for protecting electrical wires in distribution boards, labor-saving equipment, machine wiring, electrical work, etc. It excels in weather resistance, chemical resistance, and flexibility, and since the sheet colors are different on each side (gray and black), you can choose colors according to the application. It uses quick tape, allowing for easy opening and closing. Partial opening is also possible, enabling wire branching. Additionally, the full contact design prevents dust and oil from entering the tube. No tools are required, making bundling, wiring changes, and inspections easy. 【Features】 ■ Different sheet colors on each side for versatile use ■ Quick tape allows for easy opening and closing ■ No tools required for bundling, wiring changes, and inspections ■ Partial opening is possible, enabling wire branching ■ Prevents dust and oil from entering the tube ■ Excellent weather resistance, chemical resistance, and flexibility *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials

The "Fastener Tube" is a product used for the protection of wire bundling in distribution boards, labor-saving devices, machine wiring, electrical work, and more. Bundling work can be easily performed using a dedicated slider. Since installation and removal are easy, inspection and maintenance time can be significantly reduced. It can be cut to any desired length, making it economical with no waste. Due to its full contact design, dust and oil do not enter the tube. It excels in insulation, flame resistance, and flexibility. 【Features】 ■ Easy bundling work using a dedicated slider ■ Easy installation and removal ■ Significant reduction in maintenance time ■ Economical with no waste as it can be cut to size ■ Prevents dust and oil from entering the tube ■ Particularly excellent in insulation, flame resistance, and flexibility *For more details, please refer to the PDF materials or feel free to contact us.

• Piping and electrical wiring materials

The "WS Wire Supporter" is a product used as a wire supporter for distribution boards, control panels, and more. There are types WS-1 to WS-3, and by combining WS-1 and WS-2, it can support a variety of wires. 【Features】 ■ Supports a variety of wires through the combination of WS-1 and WS-2 ■ Material: Polycarbonate (with glass fiber) in black ■ Wire usage range: Outer diameter φ2 to φ12 *For more details, please refer to the PDF materials or feel free to contact us.

• Piping and electrical wiring materials
• Wiring devices
• Work tools

The "Free Cleat Mounting Base" is a product used for intermediate support (stabilization) of electrical wires. It features round holes processed at 20mm intervals in a resin extruded material. Using cable ties and other tools, intermediate support for electrical wires can be easily achieved. 【Features】 ■ Round holes processed at 20mm intervals ■ Easy intermediate support for electrical wires ■ Material: Polyvinyl chloride *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials
• Wiring devices
• Work tools

The "FRP Cleat KW Type" is a product used for holding high-voltage insulated wires. It can also be used as a separator in the middle. Since it is made from processed FRP material, it is lightweight and does not rust. It has high strength, excellent insulation and moisture resistance, and allows for free processing of dimensions between wires. 【Features】 ■ Lightweight and rust-free ■ High strength ■ Good insulation ■ Good moisture resistance ■ Excellent arc resistance ■ Dimensions between wires can be freely processed *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials
• Wiring devices
• Work tools

The "FRP Cleat Type P" can be used as an insulating fixed support for low-pressure busbars within panels, as well as a separator in the middle. Since it is made from processed FRP material, it is lightweight and does not rust. It has high strength, excellent insulation properties, and is easy to process. Furthermore, it excels in moisture resistance and arc resistance, and there is no need for post-processing like with Bakelite after machining. 【Features】 ■ Lightweight and rust-free ■ High strength ■ Good insulation properties ■ Easy to process ■ Good moisture resistance ■ Excellent arc resistance ■ No post-processing required after machining *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials
• Wiring devices
• Work tools

The "FRP Cleat Type K" can be used as an insulating fixed support for low-pressure busbars within panels, as well as a separator in between. Since it is made from FRP material, it is lightweight and does not rust. It has high strength, excellent insulation properties, and is easy to process. Furthermore, it has excellent moisture resistance and arc resistance, and there is no need for post-processing after machining, similar to Bakelite. 【Features】 ■ Lightweight and rust-free ■ High strength ■ Good insulation properties ■ Easy to process ■ Good moisture resistance ■ Excellent arc resistance ■ No post-processing required after machining *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials
• Wiring devices
• Work tools

The "Busbar Supporter" is a product used for supporting busbars in distribution boards, control panels, etc. It can easily support copper strips by simply clamping them from above and below, and should be secured with an M8 bolt (to be provided separately). The material is black polycarbonate (with glass fiber) and uses a resin material that has UL94 V-0 flame retardancy. 【Features】 ■ Easily supports copper strips by simply clamping them from above and below ■ Secured with an M8 bolt (to be provided separately) ■ Material: Black polycarbonate (with glass fiber) ■ Uses a resin material with UL94 V-0 flame retardancy *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials
• Wiring devices
• Work tools

The RBS-45, a two-tier support platform (low-voltage internal conductor insulated support platform), is used as a grounding support platform for ELBs and as a copper busbar support platform for distribution boards and control panels. Since copper busbars can be arranged in two tiers, this product can be used to place two grounding bars in close proximity to the ELB in a limited space, especially when it is necessary to distinguish between the grounding bar for ELBs and the general-purpose grounding bar. 【Features】 ■ Low-voltage internal conductor insulated support platform ■ Copper busbars can be arranged in two tiers ■ Two grounding bars can be placed in a limited space ■ Material: Made of polypropylene (black) ■ Dielectric strength: 2.5kV for 1 minute, no abnormalities 【UL94 V-0 flame-retardant type RBS-96-SPS】 【Features】 1. Molded from "SPS," one of the lightest resins among engineering plastics, offering excellent heat resistance and strength. 2. Eliminates the need for manual processing of insulation materials as in the past. 3. Features steps for easy wiring management. *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials
• Wiring devices
• Work tools

The "Three-Stage Support Stand" is a product used as a bus support stand for distribution boards and similar applications. It comes with square nuts pre-installed, allowing for easy support of copper strips. Additionally, it is lightweight because it is made of resin. 【Features】 ■ Easily supports copper strips ■ Lightweight due to being made of resin 【Material】 Made of ABS resin (black and green) *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials
• Wiring devices
• Work tools

The "Inclined Busbar Support (RBS-40・RBS-50)" is a product used as a busbar for branch wiring and as a support. Due to the inclined design of the busbar, wire connection work can be done easily, and it requires less installation space. Additionally, the bolt and nut parts are treated with environmentally friendly trivalent chrome electro-galvanizing. 【Features】 ■ The busbar is inclined ■ Easy wire connection work ■ Requires less installation space ■ Material: Made of polypropylene (black) 【RBS-40-3U-RO】 ■ This is a relay unit using BS-40. It comes assembled with a mounting bracket, copper bar, and protective cover. *For more details, please refer to the PDF document or feel free to contact us.*

• Piping and electrical wiring materials
• Wiring devices
• Work tools

【Features】 1. The copper strip can be fixed by tightening the mounting bolts with the bar holder S/S-150, allowing for a wide range of thicknesses and widths of the copper strip. 2. It reduces the manual processing time required for conventional insulating materials. 3. By inserting a separator in the middle, parallel mounting of the copper strip can be achieved from both sides. *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials
• Wiring devices
• Work tools

The "Bar Holder L (Copper Strip Insulation Support)" is fixed by tightening the copper strip with mounting bolts, allowing it to be used with a wide range of thicknesses and widths of copper strips. It has a flat bottom for stability and excellent strength. It eliminates the need for manual processing of conventional insulating materials. 【Features】 ■ Fixed by tightening with mounting bolts ■ Usable for a wide range of thicknesses and widths (up to 75mm) ■ Flat bottom for stability and excellent strength ■ Eliminates the need for manual processing of conventional insulating materials ■ Also available in flame-retardant (UB type). 【Material】 ■ Made of polypropylene *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials
• Wiring devices
• Work tools

The "Bar Holder X (Insulated Support for Low-Pressure Copper Strips)" is a product that supports copper strips without drilling holes by sandwiching them from above and below. It features a groove surface of 20mm width that intersects with a groove surface of 11mm width at a right angle, allowing for two different usage methods. Additionally, it can support copper strips with a thickness ranging from 10mm to 20mm, and it is also possible to install two 6mm strips. The width of the copper strip that can be supported ranges from 50mm to 125mm, and for supporting strips wider than 75mm, insulated bolts are available. 【Features】 - Can be used without drilling holes for supporting copper strips - Supports by sandwiching from above and below - Allows for two different usage methods - Can support copper strips with a thickness of 10mm to 20mm - Can support copper strips with a width of 50mm to 125mm - Insulated bolts are included for supporting strips wider than 75mm *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials
• Wiring devices
• Work tools

The "Indoor Support Insulator Mounting Bracket" is a mounting bracket for indoor support insulators of busbars and electrical wires within distribution boards. We offer a wide range of sizes to match the pitch of each mounting hole for indoor support insulators. You can select clamps for round wires (high-voltage insulated wires) and busbars (vertical support and horizontal support) according to your application. 【Features】 - A wide range of sizes to match each mounting hole pitch - Selection of clamps available for round wires and busbars according to application - Material: Clamp for round wires (high-voltage insulated wires): made of brass (Note: Only CB-30FJ is made of steel plate) Clamp for busbars (vertical and horizontal support type): made of cast iron + brass *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials
• Wiring devices
• Work tools

The "High Voltage Terminal Block (JT-60, JT-150)" is a product used for connecting high voltage wires. The mounting bar stands vertically, making it easy to attach terminals. The conductive parts are covered with a transparent cover, allowing for clear visibility of the connection points, and the insulated cover ensures safety even if touched accidentally. 【Features】 ■ Easy terminal attachment ■ Clear visibility of connection points due to the transparent cover ■ Excellent safety due to the insulated cover *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials
• Wiring devices
• Work tools

The "Resin Insulator (6kV)" is a product used as a mounting base for high-voltage equipment such as disconnectors and circuit breakers, as well as for insulating support in busbar wiring. Compared to conventional porcelain insulators, it is smaller, lighter, and has excellent durability, contributing to rationalization. It also boasts superior electrical and mechanical properties and is manufactured in accordance with JIS standards (JIS-C3851). 【Features】 ■ Smaller and lighter compared to conventional porcelain insulators ■ Excellent durability, contributing to rationalization ■ Superior electrical and mechanical properties ■ Manufactured in accordance with JIS standards (JIS-C3851) ■ Material: Specially processed epoxy resin *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials
• Wiring devices
• Work tools

The "Insulation Bush" is a product used for insulating the base parts of various devices such as sequencers and inverters. It comes as a set of uneven surfaces, allowing for insulation of the base parts of devices using the method shown in the image. It can be used with bolt diameters of M4, M5, M6, M8, M10, and M12. 【Features】 ■ Set of uneven surfaces ■ Ensures insulation of the base parts of devices ■ Usable with bolts of M4, M5, M6, M8, M10, and M12 ■ Material: PP (black) *Specification changed from white Duracon *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials
• Wiring devices
• Work tools

The "EI Supporter" is used as an insulating base for equipment installation such as distribution and control panels, as well as for insulating support for busbars and wiring. Made of epoxy resin, it has excellent insulation properties and is lightweight. Its load-bearing capacity is superior to that of conventional supporters, thereby expanding its range of applications. 【Features】 ■ Superior load-bearing capacity compared to conventional supporters ■ Excellent insulation properties and lightweight ■ Material: Epoxy resin *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials
• Wiring devices
• Work tools

The "Supporter Tightening Assistance Tool (SST-2P)" is an auxiliary tool manufactured by Shinohara Electric that prevents the supporter from spinning during installation. By inserting and securing the pin of this product into the pin hole on the top surface of the supporter, it prevents the supporter from spinning and improves the efficiency of the installation work. Additionally, the shape has been designed to fit comfortably in the hand, making it easier to use. We also offer the "SST-1" as a tightening assistance tool for installing Shinohara supporters. 【Features】 ■ Set of SST-2S and SST-2L ■ Auxiliary tool to prevent the supporter from spinning ■ Grip section designed with steps for improved usability ■ Prevents the supporter from spinning and enhances installation work efficiency ■ Diameter of compatible supporters is engraved on the main body *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials
• Wiring devices
• Work tools

The "Supporter Connecting Bug Screw" is used as a connecting bolt when linking two or more supporters (excluding SS and DD types). The material is made of iron, and the bolt and nut parts are finished with environmentally friendly trivalent chromate treatment with electro-galvanized coating. 【Features】 ■ Connecting bolt for linking two or more supporters (excluding SS and DD types) ■ Material: Iron ■ Bolt and nut parts are finished with environmentally friendly trivalent chromate treatment with electro-galvanized coating. *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials
• Wiring devices
• Work tools

The "Supporter (Low Voltage Insulated Support for In-Flight Conductors)" is used as an insulating base for mounting equipment such as distribution boards, control panels, and rectifier panels, as well as for insulating support for busbar wiring and electrical wiring. It has excellent insulation properties (with a dielectric strength of 2.5kV for 1 minute) and is lightweight. This eliminates the need for manual processing of insulation materials as done traditionally. There are two types available: double-sided nuts (S, T, D types) and nut-bolt combinations (SB, TB, DB types), each with a wide variety of heights and diameters, allowing for use according to specific applications. 【Features】 ■ Eliminates the need for manual processing of insulation materials ■ Two types: double-sided nuts and nut-bolt combinations ■ Excellent insulation properties: dielectric strength of over 22kV for 1 minute ■ Lightweight ■ Can also be used as a branching base by attaching branching hardware *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials
• Wiring devices
• Work tools

The "E.P. Holder (High Voltage In-Flight Insulated Wire Support)" is a product manufactured based on the standards specified in the guidelines for the certification of cubicle-type emergency power supply receiving equipment established by the Japan Electric Association. It boasts excellent insulation properties (with a dielectric strength of over 22kV) and is lightweight. By using an adapter, it can securely hold KIP wires ranging from 5.5 to 150 square millimeters. 【Features】 ■ Manufactured based on the standards specified in the guidelines for the certification of cubicle-type emergency power supply receiving equipment ■ Completely holds KIP wires from 5.5 to 150 square millimeters using an adapter ■ Excellent insulation properties: dielectric strength of over 22kV ■ Lightweight *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials
• Wiring devices
• Work tools

【Features】 1. By tightening with a cable tie, wires can be easily and securely held. 2. We offer three types with different heights, allowing you to use them according to your needs. 3. Excellent insulation properties and lightweight. *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials
• Wiring devices
• Work tools

The "Cable Bracket (Cast Iron and Aluminum)" is a bracket for the termination processing of power cables. The materials available are cast iron and aluminum. The cast iron version includes a black anti-corrosion painted type for multi-core cables and a single-core type with only the fastening hardware made of copper alloy. 【Materials】 ■ Multi-core… Cast iron with black anti-corrosion paint ■ Single-core… Fastening hardware only made of copper alloy; other parts are cast iron with black anti-corrosion paint ■ Aluminum… Main body: made of aluminum, bolts: stainless steel *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials

"Iso-Rams" is an insulated flexible busbar made by layering highly flexible strip copper conductors and coating them with self-extinguishing black PVC resin. It can connect to various devices and copper busbars with different widths of laminated copper strips. It is particularly effective for electrical equipment with high current capacity. Additionally, it has a smaller temperature rise compared to cables and bare copper busbars, and its laminated structure reduces the increase in AC resistance due to the skin effect. 【Features】 ■ Wide range of conductor sizes: 21–1200mm² ■ Can connect to various devices and copper busbars with different widths of laminated copper strips ■ High insulation performance ■ Smaller temperature rise compared to cables and bare copper busbars ■ Reduces the increase in AC resistance due to the skin effect *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• Piping and electrical wiring materials
• Wiring devices

"Proto Oil-Based" is a one-component, room temperature natural drying liquid rubber coating agent developed in the United States. It can easily form a flexible and durable rubber-like film using the same application methods as conventional paints. The range of substrates includes metals, wood, stone, glass, plastics, fibers, and paper, demonstrating excellent durability even under harsh weather conditions. Both oil-based and water-based options are available, each with unique characteristics. Please use according to your application needs. 【Features】 ■ Same application method as general paints, easy to use ■ Flexible and durable rubber-like film ■ Flexible response (does not crack or chip) ■ Excellent effects for electrical insulation, waterproofing, rust prevention, and mold/corrosion resistance ■ Dried film does not deteriorate (applicable temperature range is -34°C to +94°C) *For more details, please refer to the PDF document or feel free to contact us.

• paint

The "Switch Bridge Bar" is a bridge bar used for wiring connections such as push buttons and select switches. By using it for common line wiring of switches, wiring can be streamlined. This is particularly effective in control panels with many switches, resulting in a neater wiring finish. The insertion shape is fork-type (Y-type), making installation and removal easy. The exposed parts are treated with insulation coating for safety. 【Features】 ■ Streamlines common line wiring ■ Especially neat finish for control panels with many switches ■ Easy installation and removal ■ Exposed parts are insulated for safety ■ Material: Brass plate t=0.6mm, nickel-plated finish, with insulation coating *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• Piping and electrical wiring materials
• Wiring devices

The "Push Button Bridge Bar (Round Terminal Type)" is a bridge bar used for the common wiring of push button switches. Not only does it make the common wiring of push button switches easier compared to using wires, but it also reduces labor in wiring. Additionally, the exposed parts are treated with an insulating coating for safety. 【Features】 ■ Reduces labor in wiring ■ Easier wiring compared to using wires ■ Exposed parts are treated with an insulating coating for safety ■ Material: Brass t=0.7mm, nickel-plated finish, with insulating coating *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• Piping and electrical wiring materials
• Wiring devices

By using it for jumper wiring on terminal blocks, labor-saving in wiring can be achieved. Additionally, the exposed parts have been treated with insulation coating, ensuring safety. We offer round terminal types designed to fit terminal blocks with a terminal pitch of 16mm, 24mm, and a pole pitch of 11mm. 【Features】 ■ Achieves labor-saving in wiring ■ Used for jumper wiring on terminal blocks ■ Exposed parts are treated with insulation coating for safety ■ Material: Brass, nickel-plated finish, with insulation coating *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• Piping and electrical wiring materials
• Terminal board/equipment storage rack

The "Wiring Bar for Circuit Protectors" is a wiring bar suitable for the wiring of circuit protectors with a body width of 35mm. By using it for the wiring of circuit protectors, labor-saving in wiring can be achieved. There are two types available: a bent type suitable for combining multiple wiring bars, and a flat type suitable for use with crimp terminals for primary and secondary wiring. The exposed parts are treated with an insulating coating for safety. 【Features】 ■ Achieves labor-saving in wiring ■ Available in two types: bent type and flat type ■ Exposed parts are treated with an insulating coating for safety ■ Applicable to circuit protectors with a body width of 35mm ■ Material: Brass t=0.8mm, nickel-plated finish, with insulating coating (black) *For more details, please refer to the PDF materials or feel free to contact us.

• Power distribution and control panels
• Piping and electrical wiring materials

The "Relay Jumper Bar" can be used for wiring connections in relay sockets, remote relays, etc., thereby reducing labor in wiring. There are five types of terminal pitch: 19.4mm, 22mm, 25mm, 28mm, and 29mm. By selecting according to the compatible models, work efficiency can be improved. Additionally, the exposed parts are treated with insulation coating for safety. We also offer jumper bars with terminal pitches of 10mm and 15.5mm, as well as round terminal types. 【Features】 ■ Reduces labor in wiring ■ Five types of terminal pitch available for selection ■ Improves work efficiency ■ Exposed parts are treated with insulation coating for safety ■ Material: Brass t=0.7mm, nickel-plated finish, with insulation coating (black) *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• Piping and electrical wiring materials

The "Earth Bar" is used as a grounding copper bar for control panels, distribution boards, etc. Since the screw holes are pre-processed, there is no need for tapping after purchase. There are various variations in the dimensions of the copper bar and the number of screw holes, allowing you to choose according to the number of incoming lines. We also accept orders for custom dimensions. Additionally, we offer earth bars that can be mounted on the "Earth Terminal EC8-2" manufactured by Shinohara Electric. 【Features】 ■ Pre-processed screw holes ■ Eliminates the hassle of tapping ■ Material: Copper plate with nickel plating finish *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• Piping and electrical wiring materials

The "Branch Busbar Copper Bar" is used as a busbar for control panels and distribution boards, as well as for branch busbars. Since the screw holes are pre-processed, the hassle of tapping is eliminated. We offer seven types of standard products ranging from 100A to 400A. You can cut them according to your needs and use them. We also accept orders for custom dimensions. 【Features】 ■ Pre-processed screw holes ■ Eliminates the hassle of tapping ■ Lineup of seven standard products from 100A to 400A ■ Can be cut according to application ■ Material: Copper plate with nickel plating finish *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• Piping and electrical wiring materials

The "Joint Bar" is used as a joint between the main breaker and the bus bar when changing the pitch width of the bus bar. It is particularly convenient to use in conjunction with our "Bus Bar for Slim Breakers" when using a neutral terminal integrated breaker (slim breaker). We offer various types compatible with main breaker capacities of 50AF, 100AF, 125AF, 225AF, and 250AF, allowing you to use them according to your needs. 【Features】 ■ Changes the pitch width of the bus bar ■ Various types available to match the capacity of the main breaker ■ Material: Copper with glossy tin plating finish *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• Piping and electrical wiring materials

The "bus bars for distribution boards" are used as bus bars for each breaker in the distribution board. By using standardized bus bars during the assembly of the distribution board, you can eliminate the hassle of manufacturing them each time as was done traditionally. We offer C-type, S-type, T-type, TC-type, and TS-type in different lengths. The material is copper bars with nickel plating finish. 【Features】 ■ For distribution boards ■ Pre-used during assembly ■ Material: Copper bars with nickel plating finish *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• Piping and electrical wiring materials

The "Slim Breaker Jumper Bar" is a jumper bar specifically designed for neutral terminal integrated type breakers (Slim Breakers). Its structure does not create any steps on the bus bar, allowing it to be used with conventional designs, and making wiring work easy. It is equipped with an insulating tube, so you can use it with confidence. (The SB-T type does not have an insulating tube.) Additionally, we also offer a "3-phase 4-wire type with 30mm pitch" for 100A circuits and a "3-phase 4-wire type with 35mm pitch" for 225A circuits. 【Features】 ■ Structure that does not create steps on the bus bar ■ Usable with conventional designs ■ Easy wiring work ■ Insulated coating (except for SB-T type) ■ Rated current: 30A *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• Piping and electrical wiring materials

The "Flat Post" is a bracket for adjusting the height of equipment installation within a panel. Even after temporarily attaching the equipment, adjustments and fine-tuning can be easily made. It is made of steel plate and finished with environmentally friendly trivalent chrome treatment with electro-galvanizing. 【Features】 ■ Easy to adjust and fine-tune even after temporary attachment ■ Environmentally friendly trivalent chrome treatment with electro-galvanizing *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• Piping and electrical wiring materials

The "Distribution Board Post (Decorative Screw)" is a mounting bracket that allows for the height of the inner plate (decorative plate) of the distribution board to be adjusted freely. By attaching the inner plate (screw-fixed) to the CP type post (hinge post) and installing the UP type post (receiving post) on the opposite side, the complex installation work of the inner plate becomes easier and more efficient. The height can be freely used from 64mm to 250mm. Additionally, it is finished with environmentally friendly electric zinc plating and trivalent chromate treatment. 【Features】 ■ Easy installation ■ Height adjustable from 64mm to 250mm ■ Environmentally friendly electric zinc plating with trivalent chromate treatment *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• Piping and electrical wiring materials
• Safety and consumables

The "KS Mini Post" is a post used as an insulation support. It has excellent insulation properties, with a dielectric strength of AC2000V for 1 minute. The material is ABS (black). 【Features】 ■ Excellent insulation properties ■ Dielectric strength AC2000V for 1 minute ■ Material: ABS (black) with 2 M3 brass screws included *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• Piping and electrical wiring materials
• Safety and consumables