篠原電機 List of Products and Services

The "stud terminal block" is a terminal block that can be used as a relay, branch, or support base for wires, copper busbars, etc. Without changing the dimensions of the main body, there are three types of screw diameters: M6, M8, and M10. It has excellent insulation properties, is lightweight, and does not break. 【Features】 ■ Choose from three types of screw diameters: M6, M8, and M10 without changing the dimensions of the main body ■ Excellent insulation properties, lightweight, and unbreakable ■ Green type also available for the main body ■ RoHS compliant *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Ground Terminal Panel" is a ground terminal panel based on the "Guidelines for Certification of Cubicle-Type Emergency Power Supply Receiving Equipment" published by the Japan Electric Association. We use our ground terminal blocks AT-50/100/200. Depending on the application, you can select from six combinations regarding the number of ground terminal blocks, the presence of separators, and the presence of test terminals. 【Features】 ■ For certified cubicles ■ Uses ground terminal blocks "AT-50/100/200" ■ Select from six combinations based on application *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Back Wiring Type Ground Terminal Block" is a terminal block that allows for easy wiring when using devices for rear wiring. By opening the movable bar, it is possible to easily measure the resistance on the ground electrode side. Additionally, by short-circuiting each of the T1, T2, and T3 terminals, it is also possible to easily measure the resistance on the ground electrode side. 【Features】 ■ Easy wiring when using devices for rear wiring ■ Easy measurement of resistance on the ground electrode side by opening the movable bar ■ Easy measurement of resistance on the ground electrode side by short-circuiting each of the T1, T2, and T3 terminals *For more details, please refer to the PDF document or feel free to contact us.

• others

The "ground terminal block" is a terminal block that allows for easy measurement of the resistance on the grounding pole side by opening the movable bar. By short-circuiting the EA, EB, and ED poles, the resistance on the grounding pole side can be easily measured. There is also a type with a two-tiered movable bar (AT-200W) available for use depending on your conditions. 【Features】 ■ Easy measurement of the resistance on the grounding pole side by opening the movable bar ■ Easy measurement of the resistance on the grounding pole side by short-circuiting the EA, EB, and ED poles ■ A type with a two-tiered movable bar (AT-200W) is also available in the lineup ■ The base is available in black and green types *For more details, please refer to the PDF document or feel free to contact us.

• others

Since the copper plate and steel plate are brazed together, they will not peel off due to the heat from welding. We offer various options from one hole to four holes, rated up to 400A. Additionally, the "ECK type" is convenient for use in narrow areas where it is difficult to bolt, such as corner sections. 【Features】 ■ Compliant with the Ministry of Land, Infrastructure, Transport and Tourism standards ■ Brazed copper and steel plates do not peel off due to welding heat ■ Various options available from one hole to four holes, rated up to 400A *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

It has excellent heat dissipation, is lightweight, and can be made in various cross-sectional shapes. Natural convection, forced cooling, and a variety of cooling methods are possible. It can be used for cooling semiconductor devices and printed circuit boards. 【Features】 ■ Excellent heat dissipation, lightweight, and can be made in various cross-sectional shapes ■ Natural convection, forced cooling, and a variety of cooling methods are possible *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

The "surface heater" is a surface heating element that arranges nickel alloy resistors in a patterned manner between silicone rubber sheets. The outer layer is reinforced with glass cloth, providing excellent mechanical strength. High-efficiency far-infrared radiation is emitted from the surface, making it suitable for far-infrared heating of polymer materials. Compared to conventional ceramic far-infrared radiators, it is lighter, softer, and more cost-effective. 【Features (Silicone Rubber Heater)】 ■ Shapes and patterns can be freely designed and manufactured according to application ■ Fits heated surfaces such as curved and cylindrical shapes ■ Excellent thermal responsiveness and rapid heating capability *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

The "Thermostat PTSC-090S" can be used for temperature control (power on/off) of space heaters, ventilation fans, and more. It can be mounted on a DIN rail (it can be installed at the center of the thermostat body). In addition, we also offer the "TS-120S," which allows for continuous and stepless temperature adjustment from 0 to 120°C using a dial, as well as the "ITS-050L." *For more details, please refer to the PDF materials or feel free to contact us.

• Power distribution and control panels

The "Space Heater" is a product that can be installed inside various panels to prevent condensation and moisture. Please also use it as a heating device or an open duct heater for drying purposes. The heating element is made by wrapping and securing electric heating alloy wire around a mica plate, which is then sealed with either zinc-coated steel (chrome-free) or stainless steel. 【Features】 ■ Prevents condensation and moisture inside various panels ■ Heating element is secured by wrapping electric heating alloy wire around a mica plate ■ Sealed with zinc-coated steel (chrome-free) or stainless steel *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

The "SSH Type and TSSH Type Space Heater Specifications" are equipped with a heat dissipation cover attached to the space heater, which can be used to prevent condensation and reduce humidity inside the panel. By using the space heater, the total length is shortened by only 200W, allowing for space-saving solutions. The heat dissipation cover made of punched steel plate incorporates the space heater and can be easily installed with four screws. 【Features】 ■ Shortened total length for space-saving solutions ■ Space heater integrated into a punched steel plate heat dissipation cover ■ Easy installation with four screws *For more details, please refer to the PDF materials or feel free to contact us.

• Power distribution and control panels

【Features】 1. The space heater (terminal block type) that has been well-received is now significantly smaller! It is suitable for compact control panels and operation panels. 2. It also contributes to space-saving in various other panels. 3. It comes with a cover made of punched steel plate to prevent direct contact with the heat source. 4. It is equipped with a terminal block as standard, making it easy to connect power lines. *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

It can be used as a heater to prevent condensation and reduce humidity inside the panel. A terminal block is incorporated into the wire connection part, making the work easier. 【Features】 ■ Heater for preventing condensation and reducing humidity inside the panel ■ Terminal block incorporated into the wire connection part ■ Easy to work with ■ Terminal block: Rated 600V/25A, made of polycarbonate *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

The "Space Heater with Cover" is a space heater equipped with a heat dissipation cover, designed for use in preventing condensation and moisture inside panels. It consists of a heat dissipation cover made of punched steel plate with the space heater integrated, allowing for easy installation with two or four screws. It is designed and manufactured to be extremely safe, ensuring that there is no risk of direct contact with the heat source. 【Features】 ■ Integrated space heater within the heat dissipation cover ■ Easy installation ■ Safe design that prevents direct contact with the heat source *For more details, please refer to the PDF materials or feel free to contact us.

• Power distribution and control panels

【Features】 1. The grip area is designed with curves to fit comfortably in the hand when held. 2. It has a height that accommodates four fingers of an average adult male, making it very easy to grip. *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

【Features】 ■ The resin cover has a magnet attached, making installation and removal easy. SWCK-90 (Compact Type) 1. The resin cover has a magnet attached, making installation and removal easy. 2. It is nearly the same size as the conventional model (SWC-90), but the coverage area has been expanded. 3. Thanks to the adhesive force of the neodymium magnet, the cover is less likely to shift or fall off due to accidental contact. 4. Each side has a 30mm wide notch, allowing it to bypass simulated busbars. SWC-60 The height has been reduced compared to the conventional model, making it suitable for cam switches with a depth of 50mm. SWC-74K 1. The resin cover has a magnetic catch attached, making installation and removal easy. 2. It has been made more compact than the conventional model and is sized to fit approximately 55mm square escutcheons. 3. A push-in spacer can be installed in the center, helping to prevent forgetting to push it in after operating the handle. * For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

The "Push Button Cover Mounting Base" is a product used as an attachment when you want to install our push button cover "SWC-88" on a non-magnetic housing such as SUS304. Since it is installed by bolting it together with the equipment, no additional processing is required. We offer three types of hole diameters to match the size of the button. The area between the bracket and the panel surface is protected by an acrylic plate, so the magnets of the bracket and the push button cover do not come into direct contact with the panel surface. It protects not only non-magnetic housings but also existing panels and painted surfaces of steel panels from scratches. 【Features】 ■ The bracket is made of ferritic stainless steel (SUS430) ■ No additional processing is required as it is installed by bolting it together with the equipment ■ Three types of hole diameters are available to match the size of the button ■ The area between the bracket and the panel surface is protected by an acrylic plate *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

It can be used as a cover to prevent accidental operation of push buttons and operation switches. The resin cover has a magnet attached, making it easy to install and remove. 【Features】 ■ Cover to prevent accidental operation of push buttons and operation switches ■ Magnet included with the resin cover ■ Easy to install and remove *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

The "Drawing Bag" can be used as a storage bag to keep drawings and specifications for distribution boards, cubicles, control panels, operation panels, etc., within the panel. It is suitable for storage because it is transparent and allows for easy visibility of the contents, and it also has an excellent aesthetic appearance. The buckle design makes it easy to open and close. The top cover prevents dust and other contaminants. Additionally, it comes with a spare card holder, which can be used for the administrator's business cards. 【Features】 ■ Transparent and allows for easy visibility of contents ■ Excellent aesthetic appearance ■ Easy to open and close due to the buckle design ■ Prevents dust and other contaminants with the top cover ■ Comes with a spare card holder *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials

The "Drawing Holder" can be used to store drawings and specifications for distribution boards, cubicles, control panels, operation panels, etc., within the panel. It is suitable for storage as it is transparent and allows for easy visibility of the contents, and it also has excellent aesthetics. It is lightweight and safe as there is no risk of breaking, making it easy to handle. Installation is simple as it can be attached with double-sided adhesive tape. Additionally, there are guide holes for screws, allowing for screw fastening as well. 【Features】 ■ Transparent and allows for easy visibility of contents ■ Excellent aesthetics ■ Safe and easy to handle ■ Easy installation with double-sided adhesive tape ■ Screw fastening is also possible *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials

The "One-Touch Terminal Cover DLSC-1" can be used as a terminal protection cover for limit switches (panel-mounted type). It requires no mounting screws and can be attached and detached with one touch, providing excellent workability and maintainability. There are holes on the back side for tester probes, allowing for wiring checks while the cover is attached. Additionally, we also offer the ABC part "DSK-85," which is suitable for mounting limit switches. 【Features】 ■ No mounting screws required; can be attached and detached with one touch ■ Excellent workability and maintainability ■ Wiring checks can be performed while the cover is attached *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials

The "Cable Entry Clamp" is a product used to support wires at the cable entry points of various panels. The work is completed simply by sandwiching the wire inserted from the entry point with a packing and securing the main body to the enclosure with screws. Since there is no need to use filling material as in the past, work efficiency is improved. The new compact and simple structure product "Cable Entry Clamp (DK-SE-10)" can also be used for wire introduction. 【Features】 ■ Easy wire support ■ Wide cable entry for excellent workability ■ No need to use filling material as in the past ■ Improved work efficiency ■ Prevents the intrusion of dust and debris from the outside *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials

The "Small Door with Window Frame IP55: MD-AY-2020KT (Made to Order)" is used as a small door for operation on control panels, operation panels, cubicles, etc. 【Features】 1. It combines a small door for operation with a window frame, allowing visibility of internal instruments and operation of internal equipment without opening the main door of the panel. 2. Installation is easy. It can be fitted into the panel hole from the front and secured with a backing frame and nuts from the back. 3. There is no need to weld to the panel door, eliminating the risk of warping and improving work efficiency. 4. It can also be used for outdoor panels. (IP55) 5. Custom sizes can be ordered. Please consult us. *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials

The "Blank Panel" is a product used for cutting spare panels for various meters and equipment, as well as for concealing unnecessary panel cuts. It is sized to fit meters from various manufacturers. The material is made of steel plate and finished with black paint. 【Features】 Sized to fit meters from various manufacturers *For more details, please refer to the PDF document or feel free to contact us.*

• Subsidiary materials

The "Resin (PP) Instrument Window Frame (PY Type) IP55" enhances the value of the product due to its excellent weather resistance and beautiful finish. Installation is easy; simply cut a hole of the specified dimensions in the panel, insert the instrument window frame from the front, and secure it with the included screws from the back. It is designed for outdoor use due to its waterproof structure. Additionally, we also offer PVC instrument window frames for indoor use. 【Features】 ■ Made of resin: PP and PVC ■ Easy installation ■ Waterproof structure IP55 (PY Type) ■ Excellent weather resistance and beautiful finish *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials

The "Steel Plate Instrument Window Frame (SN Type) IP55" is excellent in weather resistance and aesthetics, enhancing the value of the installed products. It is lightweight and easy to install, improving work efficiency. We offer two types: steel plate and stainless steel, so you can choose according to your application. 【Features】 ■ Lightweight ■ Easy to install ■ Improved work efficiency ■ Available in steel plate or stainless steel ■ IP55 *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials

The "Rubber Instrument Window Frame (MG Type) IP54" is an easy-to-install window frame that improves work efficiency. It is a round type with a panel cut size of φ133. We offer both wire mesh and reinforced types of window glass. 【Features】 ■ Easy to install ■ Improved work efficiency ■ Round type ■ Panel cut size: φ133 ■ IP54 *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials

The "Rubber Window Frame (GMY Type) IP55" is a product used for reading and confirmation windows in receiving panels, distribution panels, control panels, instrument panels, etc. Installation is extremely simple, and unlike conventional methods, no retaining frame is used. The rubber window frame is fitted into the panel cut from the front and secured with screws from the back, making installation straightforward. Additionally, since there are no seams in the main body of the window frame, there are no restrictions on the installation direction. It has a waterproof structure, making it suitable for outdoor use as well. 【Features】 ■ High cost-performance rubber molded product ■ Extremely easy to install ■ No retaining frame used as in conventional methods ■ No restrictions on installation direction (no distinction between vertical and horizontal) ■ Waterproof structure allows for outdoor use (IP55) *For more details, please refer to the PDF materials or feel free to contact us.

• Subsidiary materials

The "stainless steel window frame" is a product used for inspection windows in receiving panels, distribution panels, control panels, instrument panels, etc. Installation is extremely simple; you just fit the window frame into the panel hole from the front and secure it with a backing frame and nuts from the back. Being made of stainless steel, it has excellent corrosion resistance. It features a waterproof structure, making it suitable for outdoor use. We can also produce UV-cut film specifications and wire glass (6.8mm) specifications. We accept orders for custom sizes, so please feel free to consult us. 【Features】 ■ Extremely easy to install ■ Excellent corrosion resistance due to stainless steel construction ■ Waterproof structure allows for outdoor use (IP55) ■ Production of UV-cut film specifications is also possible ■ Production of wire glass (6.8mm) specifications is also possible ■ Custom size orders are also available *For more details, please refer to the PDF materials or feel free to contact us.

• Subsidiary materials

"PET sound-absorbing material" is a safe product that does not cause discomfort to workers and is easy to recycle, even when burned. It has high heat resistance and flame retardancy, equivalent to UL94 HBF. It is intermediate between GW and polyurethane foam, and has strong resistance to ultraviolet rays and hydrolysis. Additionally, it can be manufactured in any size. 【Features】 ■ Environmentally friendly ■ High heat resistance and flame retardancy ■ Strong resistance to ultraviolet rays and hydrolysis ■ Can be manufactured in any size *For more details, please refer to the PDF materials or feel free to contact us.

• Subsidiary materials

The "CNP Filter" is a product that employs a micro demister made from long fibers of several tens of micrometers, which are carved from stainless steel foil using a special cutting method, needle-punched, and compressed with rollers. Additionally, by using all stainless steel materials, it possesses ultra-high temperature resistance, chemical resistance, and corrosion resistance, while achieving high efficiency and high oil retention due to its fiber diameter and porosity. As media, we have prepared three types: a standard type with a fiber diameter of 25μm, a density gradient type (standard) combining fiber diameters of 50μm and 25μm, and a density gradient type (high performance) combining fiber diameters of 50μm and 10μm. 【Features】 ■ Usable in high-temperature environments (heat resistance up to 480°C) ■ Excellent corrosion resistance ■ Achieves high efficiency by lowering porosity through compression ■ Minimizes fiber shedding during use or cleaning *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials

【Features】 Low pressure loss type utilizing paper honeycomb core as a spacer. GG … Activated carbon with suitable adsorption capacity and particle size can be selected based on the type and concentration of the gas to be adsorbed. T-B … Excellent for the removal of basic gases such as ammonia and trimethylamine. G-H … Excellent for the removal of acidic gases such as hydrogen sulfide and mercaptans. AD (TF) … Effective for the removal of acetaldehyde and formaldehyde. *For more details, please refer to the PDF materials or feel free to contact us.

• Subsidiary materials

The "Shield Filter (Electromagnetic Wave Prevention Filter)" is a product used as an air filter and ventilation panel that has electromagnetic wave prevention effects. It is designed in a cassette type, making installation and removal easy. Since it is made entirely of aluminum, it is lightweight and has excellent corrosion resistance and durability. Additionally, it can be cleaned with air brushing or water washing, allowing for optimal maintenance of filter performance. 【Features】 ■ Electromagnetic wave prevention effect ■ Easy installation and removal due to cassette type ■ Lightweight as it is made entirely of aluminum ■ Excellent corrosion resistance and durability ■ Can be cleaned with air brushing or water washing *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials

The "Cassette Filter CSF Type" is a dust-proof filter for ventilation areas such as distribution boards and control panels. Since it is in a cassette form, it can be easily installed and removed. Additionally, the filter frame is made of aluminum, making it lightweight, rust-free, and washable. 【Features】 ■ Its cassette design allows for easy installation and removal. ■ The aluminum frame makes it lightweight, rust-free, and washable. *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials

Shinohara Electric Co., Ltd.'s "Air Filters" offers a wide variety of types tailored to usage conditions, and sizes can also be specified as desired. Orders for cassette types (custom sizes, aluminum filter frames) are also possible. 【Main Features of the Filters】 【Filtron】 This is a non-directional fiber aggregate air filter with low pressure loss and high dust collection capacity, which is flame-retardant (compliant with JIS L-1091 Category 3) and unaffected by humidity. There are also types that can be regenerated through washing. 【Malt Filter】 Due to the freedom to choose density (cell count, 8 to 50 per 25mm) and thickness (5 to 30mm) according to application, it is ideal for commercial packages, etc. It is relatively easy to regenerate through washing. 【Saran Honeycomb】 This filter is woven from Saran fibers in a screen-like structure, making it optimal for outlet and fan coil filters. It has excellent washability and is easy to regenerate due to its lack of water absorption and moisture retention. *For more details, please refer to the PDF materials or feel free to contact us.

• Subsidiary materials

The "Plastic Gallery GPC Series" is a ventilation opening component for control panels, communication panels, etc. It can be easily attached to the panel opening with a single touch, improving work efficiency. Additionally, it can be continuously installed in both vertical and horizontal directions, enhancing aesthetics and increasing the product value of the panel. We also offer round hole mounting types that can be attached to round hole panel cuts, as well as front-opening types of plastic galleries. 【Features】 - Can be attached to the panel opening with a single touch - Can be continuously installed in both vertical and horizontal directions - Excellent aesthetics, enhancing the product value of the panel - Easy filter replacement by removing the front gallery - Compatible with 92mm, 120mm, and 160mm fans *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials

The "Connected Plastic Gallery (for indoor use)" is a ventilation component for control panels and instrument panels. Holes are drilled according to the panel cut dimensions, allowing the plastic gallery to be fitted from the front and easily installed with mounting brackets from the back. The "GP-9" can accommodate a 92mm square fan motor, while the "GP-12" can accommodate a 120mm square fan motor. Additionally, the installation of a dust filter is also easy. Furthermore, by using the plastic gallery joints (PGJ-12, PGJW-12), it can be connected in series (only for GP-12). 【Features】 ■ For indoor use ■ Easy installation ■ Easy installation of dust filters ■ Can be connected using plastic gallery joints (only for GP-12) *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials

The "Free Aluminum Gallery" is an aluminum ventilation gallery designed to promote airflow within enclosures such as cubicles, distribution boards, and control panels. It can be manufactured to your specified dimensions, eliminating the need to process ventilation holes directly into the panels as was done traditionally. This product can be installed later as a component. It offers high ventilation efficiency and is opaque. It is lightweight and does not pose a rust concern. 【Features】 ■ Custom dimensions available ■ No need to process ventilation holes in the panels ■ High ventilation efficiency and opaque ■ Lightweight and rust-free *For more details, please refer to the PDF materials or feel free to contact us.

• Subsidiary materials

The "Ventilation Fan Hood IP34" is a product used as a ventilation fan for operation panels, control panels, cubicles, etc. It is easy to install; simply insert it into the panel hole from the front and secure the ventilation fan with screws from the back. The set includes the hood, fan, finger guard, and a power cord (1m), so you can use it right away. If you want to maintain a similar area for the hood opening compared to the fan diameter, you can use a mounting plate to install a hood that is one size larger. 【Features】 - Easy installation. Just insert it into the panel hole from the front and secure the ventilation fan with screws from the back. - The set includes the hood, fan, finger guard, and a power cord (1m), so you can use it right away. - If you want to maintain a similar area for the hood opening compared to the fan diameter, you can use a mounting plate to install a hood that is one size larger. *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials

The "Hooded Gallery IP34" is a ventilation component for control panels, operation panels, cubicles, etc. Due to its structure with a hood on the gallery, it is effective against wind and rain. Additionally, it is easy to install; simply insert it into the panel hole from the front and secure it with screws from the back using the holding frame. With the included accessories such as a blow prevention cover, insect net, and dust filter, specifications can be selected according to the application. (Available only for FG-15 and FG-20) It can also be set up with a salt-resistant filter. 【Features】 ■ Its structure with a hood on the gallery makes it effective against wind and rain. ■ Installation is simple. Just insert it into the panel hole from the front and secure it with screws from the back using the holding frame (holding plate). ■ It can also be set up with a salt damage prevention filter. *For more details, please refer to the PDF materials or feel free to contact us.

• Subsidiary materials

The "Small Ventilation Gallery (for Indoor Use)" can be installed as a component for ventilating indoor distribution boards, control panels, and instrument panels after the completion of the housing (it is not waterproof). There is no need to process ventilation holes directly into the panel as was done traditionally, allowing for improved work efficiency by installing it later. Additionally, it is possible to attach a 120 square motor fan. We also offer a small ventilation gallery with a dust filter that can be installed and removed from the front. 【Features】 - No need to process ventilation holes directly into the panel - Improved work efficiency by installing it later - Can accommodate a 120 square motor fan (SG1-10-4) - Material: Steel plate...1.6mm with primer, Stainless steel...1.5mm *For more details, please refer to the PDF materials or feel free to contact us.

• Subsidiary materials

The "Fan Unit" is a product used as a ceiling exhaust component for control panels. When exhausting from the top of the panel, the hinge structure allows for easy maintenance and replacement of the filter from the inside, eliminating the need for high-altitude work or ladders. Since the fan and terminal block are pre-assembled, installation is simple; just connect the power line to the terminal block after mounting it to the enclosure. 【Features】 ■ Easy filter maintenance with a hinge structure ■ Filter replacement can be done from inside the control panel, eliminating the need for high-altitude work ■ Fan and terminal block are pre-assembled ■ Maximum airflow (m3/min): 50/60Hz 2.0/2.3 *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials

The "Fan-equipped Gallery (Salt Damage Prevention Specification) IP45" is a product used for forced ventilation (exhaust) of various panels. It is equipped with a salt-resistant filter for salt damage prevention and features a structure with excellent waterproofing due to the drainage filter. Additionally, we also offer stainless steel fan-equipped galleries that can be used outdoors. 【Features】 ■ Salt damage prevention specification with salt-resistant filter ■ Structure with excellent waterproofing ■ Can be installed with only corner hole processing on the panel ■ The included fan comes with a finger guard and power cord ■ The drainage filter and dust filter can be regenerated through cleaning ■ Standard paint color: Munsell 5Y7/1 semi-gloss *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials

The "Inwing Type Ventilation Gallery (Splash-Proof Type) IP45" is designed for outdoor use with a splash prevention cover, ensuring an opening area of 148 cm². Since there is no need to process ventilation holes in the panel as before, significant labor savings can be achieved, and adding additional ventilation holes is also easy. Moreover, by combining the rear-side gallery with the splash prevention cover, it boasts excellent waterproofing and is constructed to withstand JIS C 0920 (splash-proof test). 【Features】 ■ Splash-proof type IP45 ■ Outdoor specification with splash prevention cover ■ Double-structured gallery ■ No need for processing ventilation holes ■ Easy to add ventilation holes ■ Excellent waterproofing and withstands JIS C 0920 (splash-proof test) *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials

The "Slim Splash-Proof Gallery" achieves significant downsizing in depth dimensions while ensuring the same level of protection as conventional products, allowing for space-saving design. Thanks to the effectiveness of the inner parts, the filter surface is less exposed to rain and wind, preventing the ventilation capacity of the filter from being reduced by water film even during rainy weather. Maintenance work on the filter can be performed from the front side. A fan can be installed on the back side (please use it for exhaust purposes when installing the fan). We also offer salt damage-resistant versions, including the 20-type "GTS-20W-ST" and the 45-type "GTS-45W-ST." 【Features】 ■ Inner parts allow air to pass while stopping water ■ Space-saving and compact ■ Splash-proof: IP45 ■ Filter replacement possible from the front ■ Ventilation fan installation available (back side) *For more details, please refer to the PDF materials or feel free to contact us.

• Subsidiary materials

The "Anti-Splash Type Gallery (Salt Damage Countermeasure Specification)" is a product designed for salt damage prevention, featuring excellent impact resistance and achieving more than double the lifespan of conventional products. It has a high collection efficiency for marine salt particles, and even when the collected marine salt particles deliquesce, the increase in pressure loss is low, resulting in approximately half the low pressure loss compared to conventional products. Additionally, we offer a cover resin type that allows for the use of standard salt-resistant filters and dust filters interchangeably. 【Features】 ■ Salt damage countermeasure specification ■ Low pressure loss (about half of conventional products) ■ High collection efficiency for marine salt particles ■ Long lifespan (more than double that of conventional products) ■ Excellent impact resistance *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials