イソライト工業 List of Products and Services

Fiber Max is a fiber made of polycrystalline mullite (PCW) that has excellent heat resistance and high fiber strength. The Fiber Max "1600SF Blanket" is a product with an extremely low shot content. Additionally, we have started selling the "D Block," which is a modularized version of the Fiber Max 1600SF Blanket. It has a proven track record of use as internal insulation for industrial furnaces and as backup insulation material. 【Features】 ■ RCF regulation compliant product ■ Excellent heat resistance and high fiber strength ■ Fiber material excluded from regulation under CLP regulations and German regulations (TRGS 905) ■ Various supporting brackets are available to match installation conditions (※D Block) *For more details, please contact us or download the catalog.

• Insulation work

*Take it out of the bag when using it.* 1. When dried or fired, it becomes a lightweight, surface-hardened, elastic insulation material. 2. It can be cut into the desired shape with a utility knife or similar tool and applied, even in complex junctions where conventional furnace materials are difficult to use. 3. Since it hardens when dried, you can take it out of the bag and mold it into your desired shape, such as a flat plate or cylinder, while it is still soft, and then dry it to create a ceramic fiber board. 4. Due to its property of being resistant to leakage of molten metals, it can also be used as an inner lining for transport troughs for aluminum and zinc.

• Exterior tiles
• Interior and exterior tiles
• Insulation work

Eftamp is a wet-type amorphous refractory insulation product that combines bulk fiber with binders and refractory materials. We have developed a product with high thermal insulation properties. It is also highly adhesive and can be used as lining materials, boards, and for repair applications in various industrial furnaces where the installation of high-temperature insulation wool products is challenging. 【Features】 ■ Reliable Japanese manufacturing ■ Exempt from RCF regulations (Specific Chemical Substances Hazard Prevention Regulations) IsoLite Industries contributes to carbon neutrality and environmental conservation through high-temperature refractory insulation technology. *For more details, please download the PDF or contact us directly.

• Heat shielding sheet
• Window and shutter openings
• Incinerators and chimneys

IsoLite Industrial's "Iso Wool LTC-ES" is a developed product that achieves a large and easy-to-use size among the ultra-low thermal conductivity LTC series. In addition to the size 25X600X900, size 50X600X900 has also been added to the lineup. Please feel free to contact us. The "Fiber Max 1600 SF Blanket" is a product that has successfully reduced the shot content rate. Both products are made in Japan and are not subject to RCF regulations. IsoLite Industrial contributes to carbon neutrality and environmental conservation with its high-temperature fireproof insulation technology. *For more details, please download the PDF or contact us directly.

• Heat shielding sheet
• Window and shutter openings
• Incinerators and chimneys

We provide comprehensive services that include everything from the design of industrial furnace blueprints to construction and maintenance.

• Insulation work
• Incinerators and chimneys
• Heat insulation and heat shielding methods

It is a product with high strength and excellent workability compared to general microporous products.

• Insulation work
• Heat insulation and heat shielding methods
• Heat shielding sheet

Engineered fibers are inorganic fiber products that can exhibit excellent characteristics as composite materials by adding them to raw material. The fiber length can be adjusted from 20μm to 1000μm to suit various applications. By removing shots (non-fibrous particles) present in the product, it is possible to increase the fiber index (fiber content) up to 99%. It is a polycrystalline fiber that is classified as PCW and is not subject to RCF regulations.

• Exterior tiles
• Interior and exterior tiles
• Insulation work

High-Temperature Dust Collection Ceramic Filter ● Isofil N MARK2 is a filtration-type dust collection filter that utilizes the high-temperature insulation technology and ceramic fiber molding technology developed by IsoLite Industries. ● Isofil W-2200 (development product) is a ceramic filter made by rolling a blanket into a cylindrical shape and curing it. It is a product that is less prone to breakage compared to our conventional ceramic filters. Please refer to the leaflet for details. - It has significantly higher heat resistance compared to general dust collection filters, and can be used at temperatures up to 900°C. - Prevents filter damage from flying sparks. It is safe. - Allows for the omission of exhaust gas cooling equipment. - Enables the utilization of waste heat from high-temperature clean gases, achieving effective use of thermal energy. - Based on our accumulated insulation technology and track record, we provide support from design to implementation. 【Main Achievements and Applications】 Chemical plants / Metal processing plants / Boiler plants / Sludge treatment facilities, sewage sludge treatment facilities Boiler exhaust gas treatment / Industrial waste incinerators / Kiln exhaust gas treatment / Coal gasification furnaces Black smoke removal / Melting furnaces

• Biomass heat utilization technology
• Heat and Drying Treatment Systems
• Water treatment technology and systems

Engineered fiber is an inorganic fiber product that exhibits excellent characteristics as a composite material by adding it to raw material. The fiber length can be adjusted from 20μm to 1000μm to suit various applications. By removing shots (non-fibrous particles) present in the product, it is possible to increase the fiber index (fiber content) to as high as 99%. Features: - Inorganic fiber - Heat resistance (maximum use temperature 1,260 to 1,600℃) - Average fiber diameter 2 to 6μm - Large surface area due to fiber shape - Lightweight and reinforcement effect of added products - High hardness Maximum use temperature: Grade 1260: 1260℃ Grade BSSR1300: 1300℃ (not subject to RCF regulations) Grade 1400: 1400℃ Grade 1600: 1600℃ (not subject to RCF regulations)

• Parts and Materials
• Fuel Cells
• Manufacturing Equipment

This is a product that utilizes the excellent properties of alumina fiber. It features high heat resistance, long-term stability, high strength, and excellent workability. Please give it a try.

• Insulation work
• Heat insulation and heat shielding methods
• Heat shielding sheet

The excellent characteristics of Isoool products and Fibermax products, namely high thermal insulation and low heat storage, can be maintained while suppressing shrinkage during high-temperature heating, and enhancing scale resistance, abrasion resistance, and wind resistance. They also exhibit excellent resistance to impurities in combustion gases.

• Insulation work
• Heat insulation and heat shielding methods
• Tile work

Isoplaton lightweight setters are high-performance ceramics that are lightweight and high-strength, made primarily from ceramic fibers and alumina particles and fired at high temperatures. They are setters for firing electronic components with excellent anti-spalling and binder-removal properties. They have extremely high dimensional accuracy and are available in various shapes, including flat plates, with feet, or with grooves, all customizable to meet specific needs, and are used for firing various electronic components. ● For more details, please contact us.

• Exterior tiles
• Interior and exterior tiles
• Insulation work

Our company offers a variety of products made primarily from high-performance ceramic fibers, such as "Lightweight Setter for Firing" and "High-Temperature Dust Collection Filter." We also provide "Engineered Fiber," which can enhance the properties of base materials when added to friction materials, coatings, molding materials, and refractories. 【Product Lineup】 ◎ Lightweight Setter for Firing Electronic Components "Isoplaton" 　■ Porous and breathable, with excellent binder removal properties 　■ Outstanding workability, heat resistance, and spalling resistance ◎ Ceramic Fiber Raw Material "Engineered Fiber" 　■ Fiber length and shot content can be adjusted ◎ High-Temperature Dust Collection Ceramic Filter "Isofil" 　■ Dust removal rate of over 99.9%, average particle diameter of 4.5μm 　■ Maximum operating temperature of 900℃, suitable for high-temperature incineration gas treatment *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Garbage disposal, central dust collection, laundry, compressor
• Piping and insulation
• Heat exchanger

We manufacture various shapes depending on the application. If smoke or odor generated during initial heating is a concern, please consult us. - This product is not subject to the Specific Chemical Substance Hazard Prevention Regulations (Tokka) by the Ministry of Health, Labour and Welfare. - This fibrous material is excluded from regulation under the CLP Regulation and German regulation (TRGS 905).

• Tile work
• Insulation work

Features ■ Heat resistant ■ High thermal insulation ■ Lightweight and highly flexible ■ Thin insulation paper

• Insulation work
• others

Features ■ It has excellent resilience and dimensional accuracy. ■ A wide range of density settings is possible. ■ It has excellent workability. *Various support brackets are also available to match the installation conditions.

• Exterior tiles
• Interior and exterior tiles
• Insulation work

■ Fiberplast ■ Moldable ■ Coating Cement ■ MB Cement ■ Rigidizer

• Insulation work
• Heat insulation and heat shielding methods
• Tile work

■ Bariform ■ Fiberplast ■ Moldable ■ Cement

• Insulation work
• Heat insulation and heat shielding methods
• Tile work

Engineered fibers are inorganic fiber products that can exhibit excellent characteristics as composite materials by adding them to raw material. The fiber length can be adjusted from 20μm to 1000μm to suit various applications. By removing shots (non-fibrous particles) present in the product, it is possible to increase the fiber index (fiber content) to as high as 99%. It is a polycrystalline fiber that is classified as PCW and is not subject to RCF regulations.

• Exterior tiles
• Interior and exterior tiles
• Insulation work

The "Isofil N MARK2" is a candle-shaped ceramic filter that can efficiently collect soot from high-temperature exhaust gases generated by incineration equipment and other sources. It boasts excellent heat resistance, with a maximum operating temperature of 900°C. It can prevent filter damage caused by flying sparks, and the exhaust gas cooling device for filter protection can be omitted. We provide support from design based on our accumulated insulation technology achievements. The material used is alumina fiber, achieving lightweight, high permeability, and high strength. In addition to low pressure loss, it is also resistant to sudden temperature changes. 【Features】 - Minimal reduction in strength due to heating, resulting in a long lifespan - Dust is removed by a pulse jet, allowing for stable continuous operation - High space ratio results in very little pressure loss - High-temperature clean gas after treatment can be reused as thermal energy *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Garbage disposal, central dust collection, laundry, compressor
• Piping and insulation
• Heat exchanger

This is a revolutionary machinable ceramic that is formed by adding a special binder to high-temperature insulating wool, thermally fused at high temperatures, and structured into a three-dimensional mesh, enhancing its lightweight, high strength, durability against spalling, and breathability. Compared to diatomaceous earth traditionally used in glass processing, it offers stable quality and can withstand long-term use, resulting in high cost performance. ■ Features - Lightweight with a small thermal capacity - Capable of precision machining - High thermal shock resistance ● For more details, please contact us or download the catalog.

• Exterior tiles
• Interior and exterior tiles
• Insulation work

Isoplaton lightweight setters are high-performance ceramics that are lightweight and high-strength, primarily made from ceramic fibers and alumina particles, and are sintered at high temperatures. They are setters for firing electronic components with excellent anti-spalling and binder-removal properties. They have extremely high dimensional accuracy and come in various shapes, including flat plates, with feet, and with grooves, all available as custom orders, and are used for firing various electronic components. ● For more details, please contact us.

• Exterior tiles
• Interior and exterior tiles
• Insulation work

Fire Guard AL Seal-BS is a joint filling material for ALC panels made from Iso Wool BSSR, which excels in fire resistance and workability. - A product developed with IsoLite Industrial's unique technology that is exempt from RCF regulations. - Excellent in fire resistance, thermal insulation, sound absorption, and workability. - High chemical stability. - The product is white. ● For more details, please contact us or download the catalog.

• Heat shielding sheet
• Window and shutter openings
• Incinerators and chimneys

The excellent characteristics of Isoool products and FiberMax products, namely high thermal insulation and low heat storage, can be maintained while suppressing shrinkage during high-temperature heating, and enhancing scale resistance, abrasion resistance, and wind speed resistance. They also exhibit excellent resistance to impurities in combustion gases.

• Insulation work
• Heat insulation and heat shielding methods
• Tile work

The strength appears by spraying or dipping this product and then drying and heating it. ■Instructions for Use To cure the inner lining surface of high-temperature insulating wool, first dilute the rigidizer concentrate with clean water to about half its original concentration. Next, using a hydraulic spray with a pressure of 1-2 kg/cm² (pressure tank type or pump type), evenly spray the diluted liquid at a rate of 2 liters per square meter. Smooth the sprayed surface with a wooden trowel or roller. After leaving it for at least 8 hours, drying or heating will yield a good curing surface. Please note that if the concentrate is sprayed directly, a thin curing film will form on the surface of the blanket, which can easily peel off and will not achieve the intended purpose. Additionally, this product is non-toxic, but it can easily adhere to the skin, so please use thin rubber gloves. If it accidentally comes into contact with the skin, wash it off immediately with water or warm water.

• Insulation work
• Heat insulation and heat shielding methods
• Tile work

It is made from high-refractoriness chamotte as a base, an inorganic binder with a minimized alkali content that could potentially damage high-temperature insulating wool, and additives to improve workability.

• Insulation work
• Heat insulation and heat shielding methods
• Tile work

Compared to conventional castable refractory materials, it is lightweight, has high thermal insulation properties, is highly adhesive, and is used as a lining material for various industrial furnaces where construction with high-temperature insulation wool products is difficult. 1. It has good workability, can be molded into complex shapes, and is also suitable for applications requiring balling. 2. The dry product is a water-hardening product that is mixed with water and cures at room temperature, similar to conventional castables. The wet product is a thermosetting product that cures through dry heating. 3. It is lighter and has a lower thermal conductivity compared to castables. 4. While based on high-temperature insulation wool, it possesses high strength. 5. It has no drying shrinkage, and the thermal shrinkage after heating is minimal, providing excellent volume stability.

• Insulation work
• Heat insulation and heat shielding methods
• Tile work

Iso Wool Felt is a product made by using Iso Wool and adding an organic binder to shape it into a board. It has suitable flexibility and self-supporting properties, making it easy to work with and used as a backup material for furnace lining and high-temperature sealing material.

• Exterior tiles
• Interior and exterior tiles
• Insulation work

*Take it out of the bag when using it.* 1. When dried or fired, it becomes a lightweight, surface-hardened, elastic insulation material. 2. It can be cut into the necessary shapes with a utility knife or similar tool and applied even in complex junctions where regular furnace materials are difficult to use. 3. Since it hardens when dried, you can take it out of the bag and shape it into your desired form, such as flat plates or cylinders, while it is still soft, and then dry it to create ceramic fiber boards. 4. Due to its property of being resistant to leakage of molten metals, it can also be used as an inner lining for transport ducts of aluminum and zinc.

• Exterior tiles
• Interior and exterior tiles
• Insulation work

The panel heater is a product that integrates a coil heater into a molded form made of lightweight, heat-resistant, and insulating Iso Wool, combining the functions of insulation material and heating element. It excels in the rapid and stable control of furnace temperatures and is lightweight and easy to handle, making it widely used in various industrial kilns and experimental furnaces that require energy savings and labor reduction. ● For more details, please contact us or download the catalog.

• Exterior tiles
• Interior and exterior tiles
• Insulation work

We manufacture various shapes according to their intended use. For more details, please contact us or download the catalog.

• Exterior tiles
• Interior and exterior tiles
• Insulation work

Iso Wool Board is a product formed into board shape by adding organic and inorganic binders to Iso Wool. It has minimal strength variation at high temperatures, is lightweight, and excels in thermal shock resistance, making it ideal for use under rapid heating and cooling conditions. Additionally, it possesses higher mechanical strength compared to other insulation materials. It demonstrates excellent performance as lining and backup material for various types of kilns, including high-temperature electric furnaces. ● For more details, please contact us or download the catalog.

• Exterior tiles
• Interior and exterior tiles
• Insulation work

Unifelt B is a type of product that has a thinner thickness than Uniblock. By simply using a dedicated inorganic adhesive called Caustic to bond it to the surface of the furnace wall, you can enhance the thermal insulation performance of the furnace wall and achieve energy savings. ● For more details, please contact us or download the catalog.

• Exterior tiles
• Interior and exterior tiles
• Insulation work

IsoLite blocks are block-shaped products that are modularized by cutting (or folding) Iso Wool blankets and compressing them in layers. By compressing and layering the blankets, the density can be increased and the thermal conductivity can be reduced. ● For more details, please contact us or download the catalog.

• Exterior tiles
• Interior and exterior tiles
• Insulation work

The IsoLite blanket is a lightweight and flexible fireproof insulation material that is formed by layering fibers during the manufacturing process while performing needle punching, intricately entangling the fibers to maintain a blanket-like shape. Since this blanket does not contain organic binders, it will not burn out in high-temperature environments or contaminate the atmosphere inside a furnace during combustion. As an application product, it is also possible to manufacture custom shapes, such as die-cut products that are pre-cut into specified shapes for use as packing materials. ● For more details, please contact us or download the catalog.

• Exterior tiles
• Interior and exterior tiles
• Insulation work

- Withstand high temperatures. - High thermal insulation. - Lightweight and low heat retention. - Chemically stable. - Withstand rapid heating and cooling. Bulk is the basic form of high-temperature refractory fiber, possessing not only heat resistance and thermal insulation but also excellent filling properties and resistance to thermal shock. It is used for expansion filling, as backup insulation for various industrial furnaces, and as a raw material for various secondary processed products. Filling density guideline: Generally, it can be filled and used within the range of 60 to 250 kg/m³, according to the desired density. For more details, please contact us or download the catalog.

• Exterior tiles
• Interior and exterior tiles
• Insulation work

Isotap is an amorphous insulation material composed of fire-resistant insulating fibers and fire-resistant aggregates. It is lighter and has higher insulation properties compared to conventional castable plastic refractories, and it is also highly adhesive, making it suitable for use as lining material in various industrial furnaces where the installation of high-temperature insulating wool products is difficult. Isotap F-12A and 14A are products not subject to RCF regulations. They have good workability, can be molded into complex shapes, and are also suitable for applications requiring ball-shaped construction. F-12A and 14A are dry products that, like conventional castables, are mixed with water and cure at room temperature as hydraulic products. They are lighter and have lower thermal conductivity compared to castables. While based on high-temperature insulating wool, they possess high strength. They exhibit no drying shrinkage, and their thermal shrinkage after heating is minimal, providing excellent volume stability. For more details, please contact us or download the catalog.

• Insulation work
• Heat insulation and heat shielding methods
• Tile work

Neo Coat-KA (dry type) and MI (wet type) are surface coating agents for stack lining that are not subject to RCF regulations. Iso Wool Unifelt-B, Uniblock, and surface coating materials for stack lining maintain the excellent properties of Iso Wool, namely high thermal insulation and low heat storage, while also suppressing shrinkage at high temperatures, enhancing scale resistance, abrasion resistance, and wind speed resistance. Additionally, they exhibit excellent resistance to impurities in combustion gases. For more details, please contact us or download the catalog.

• Insulation work
• Heat insulation and heat shielding methods
• Tile work

The FiberMax board series offers a variety of options with maximum usage temperatures ranging from 1400°C to 1800°C. The P board series is a high-heat-resistant lightweight insulation board that utilizes the properties of polycrystalline mullite-based alumina fibers, which have excellent heat resistance and high fiber strength. It has a proven track record in high-temperature processing of various electronic components. ● Please feel free to contact us for product samples.

• Insulation work
• Heat insulation and heat shielding methods
• Tile work

Fiber Max 1600 Uniblock and Saver Block are block-shaped products made by cutting (or folding) PCW (polycrystalline fiber) blankets and unitizing them while compressing them in layers. Various fittings are also available to suit construction conditions. For more details, please contact us or download the catalog.

• Insulation work
• Heat insulation and heat shielding methods
• Tile work

The Isoool BSF rope includes a twisted type rope made with Isoool BSF yarn G, as well as a braid rope that uses rope or elongated cut Isoool BSSR blankets as the core material, with the surface covered in glass yarn, stainless wire, etc. For more details, please contact us or download the catalog.

• Tile work
• Insulation work
• Heat insulation and heat shielding methods

BSSR paper is a product made from biodegradable fibers (AES wool) in a paper form, featuring excellent thermal insulation, high flexibility, and is used as a cushioning material for refractory materials, among other applications.

• Insulation work
• Incinerators and chimneys
• Other Batteries

Iso Wool BSSR VFS is a product made by adding organic and inorganic binders to biodegradable fibers (AES wool) and shaping them with a special molding machine. Various shapes are manufactured according to application needs. It can be used as lining and backup material for various types of kilns, including high-temperature electric furnaces. ● For more details, please contact us or download the catalog.

• Tile work
• Insulation work
• Heat insulation and heat shielding methods

Iso Wool BSSR board is a high-temperature insulation board formed by adding organic and inorganic binders to biocompatible fibers (AES wool). It can be used as lining and backup material for various industrial furnaces, including high-temperature electric furnaces.

• Exterior tiles
• Interior and exterior tiles
• Insulation work

Iso Wool BSSR blocks are block-shaped products made by cutting (or folding) biodegradable fibers (AES wool) and modularizing them while compressing them in layers. By compressing and layering the blankets, the density can be increased and the thermal conductivity can be reduced. Types of Blocks: - Uniblock: A block-shaped product made by cutting and compressing layered blankets. - Saver Block: A block-shaped product made by folding blankets in an accordion shape and compressing them in layers. - HS Block (Sewn Block): A block-shaped product made by cutting blankets and modularizing them through sewing. ■ Fitting (TYPE-S): This type has support fitting fixing stud bolts pre-welded to the iron sheet, to which metal support fittings are attached using nuts and washers to secure the block. ■ Fitting (TYPE-M): This type has the support fitting and block integrated, fixed from the inside of the furnace with a special nut. ■ Fitting (TYPE-T): This type has the support fitting and block integrated, fixed with a nut on the outside of the casing.

• Exterior tiles
• Interior and exterior tiles
• Insulation work