イマダ List of Products and Services

The FSA-Q series is a unit product that includes all the necessary components for analyzing the correlation between load, displacement, and strain. The accompanying software allows for simultaneous recording and graphing of each measurement on the same time axis. **Features of the FSA-Q Series** - Simultaneous measurement of load, displacement, and strain (at three locations) is possible (strain gauges are sold separately). - The included download software, Quad Graph Drawer, enables simultaneous recording and graphing of measurement values from all channels. This allows for easy analysis of correlations since data from each channel is obtained with aligned time axes. - Control of the measurement stand's operation based on load values is possible. By purchasing additional load cells, simultaneous measurements can also be performed at two load points and two strain points, among other configurations. *For more details, please refer to the PDF documentation or contact us.*

• Other measuring instruments

The QSMA-400 is a measurement amplifier designed to be used in combination with Imada's eZ-Connect series load cells. It can input up to four load cells, strain gauges, or voltage sensors, enabling correlation analysis using the included software. **Features of QSMA-400** - Inputs for up to 4 channels of load, torque, strain, and voltage. In addition to the 4 channels, inputs for displacement (angle) and contact signals are also possible. - Imada's eZ-Connect series load cells can be installed without the need for calibration. - The included download software, Quad Graph Drawer, allows simultaneous recording and graphing of measurement values from all channels. Since data from each channel is obtained with aligned time axes, correlation analysis is made easy. We also offer the "Load-Deformation Evaluation Unit FSA-Q Series," which includes all the necessary products for measuring load-displacement/strain. *For more details, please refer to the PDF document or contact us.*

• Other analytical equipment

By combining Imada's torque gauge, electric torque stand, and attachments, it is possible to conduct repeated torque durability tests on retractable containers. Please check the measurement video linked for measurement images and product configuration. 【Features】 ■ Torque testing of retractable containers used for items like lipsticks and glue sticks is possible. ■ The use of an electric torque stand enables testing at a uniform speed. ■ Rotation can be stopped and reversed at a specified angle. ■ Repeated durability tests can be conducted by repeating the same action a specified number of times. ■ Testing with contents inside is possible by using a long shaft pin. ■ Torque-angle analysis can be performed using graphing software. For more details, please refer to the PDF document or contact us.

• Other measuring instruments

The ACMTS series is an electric torque stand designed to be used in combination with the Imada-made screw cap torque meters DTXS/DTXA series. It can equalize the rotation speed, improving the reproducibility of torque measurements. **Features of the ACMTS Series** - Equipped with angle input/output functionality, allowing for angle-torque measurements. - Capable of controlling operations based on torque values and angles. It can also conduct durability tests that repeat the same cycle. - Offers a wide speed range, accommodating various measurements. - A variety of optional attachments are available for different combinations based on samples. - Optional software is also available for plotting torque-time and torque-angle graphs. ■ For Imada-made screw cap torque meters, please refer to the related products at the bottom of the page. ■ There is also a "Torque-Angle Measurement Unit TAA-ACMTS Series" that includes all necessary products for torque-angle measurements. For more details, please refer to the PDF materials or contact us.

• Other measuring instruments

The TFCU series is a tabletop calibrator designed to verify the accuracy of Imada's force gauges (load measuring devices). By regularly checking accuracy, it is possible to reduce the risk of accuracy deviations in the force gauges. **Features of the TFCU Series** - It can verify accuracy for load values up to 500N. - It can be used for accuracy verification in both compression and tension directions. - The smooth handle operation allows for easy adjustment to the desired load value. - The mechanical force gauge PSM series, used as a reference instrument, comes with a calibration certificate and a traceability diagram. ■ For Imada force gauges, please refer to the related products at the bottom of the page. ■ Imada also offers calibration services for Imada force gauges. Upon request, ISO/IEC 17025 calibration can also be performed. For more details, please refer to the calibration service page on our website.

• Other measuring instruments

This is a measurement unit for the squeezing force of eye drop containers, combining a force gauge (load measuring device), an electric measurement stand, and custom attachments. Please check the measurement video at the related link for measurement images and product composition. 【Features】 ■ It can measure the pressing force required to dispense a single drop of eye medication. ■ By standardizing the pressing position and speed, it achieves highly reproducible measurements. ■ When combined with a scale, it allows for verification of the relationship between pressing force and drop volume. ■ With a maximum sampling rate of 2000Hz, it measures even minute changes in load values more accurately. For nasal spray containers, it is also possible to measure the extrusion force using custom attachments. For more details on custom manufacturing services, please refer to the PDF document or contact us.

• Other measuring instruments

This is a download software for graphing when combined with IMADA's digital force gauge and torque meter. There is a Standard version that allows for the creation of load-time (torque-time) graphs, and a Professional version that enables the creation of load-time/displacement (torque-time/angle) graphs. 【Features】 - High-speed communication of up to 2000 samples per second enables the creation of highly accurate and reproducible graphs. - Graph editing features such as graph overlay and interval selection support comparison and analysis of measurement results. - Automatically calculates and displays statistical values such as peak and average values. - Rich preset functions allow for efficient graph creation and data analysis. - User-friendly UI design provides easy access to each function. - Includes a measurement management feature that allows for the setting of login IDs and passwords. - Functionality can be expanded through the user support site (IMADA Connected). *To use this product, account and product registration with IMADA Connected is required for data download.

• Other Software

By combining the Imada load-displacement measurement unit with attachments, top load testing of PET bottles can be achieved. For the products used in the measurement, please refer to the PDF document "【Imada A4 Leaflet】Examples of Product Configuration for Top Load Testing of PET Bottles." 【Features】 ■ It is possible to conduct tests similar to those performed with a top load tester. ■ It supports top load tests with a maximum load of 500N. ■ The attachment has grooves on the compression surface to allow air to escape, enabling more accurate measurement of the container's inherent strength. ■ With a maximum sampling rate of 2000Hz, it can respond to rapid changes in load, allowing for more accurate peak value acquisition. ■ The included PC software can plot load-displacement/time graphs. ■ The graph overlay function and automatic statistical calculation feature support the analysis of measurement results. By adding a long stroke option to the measurement stand, it can also accommodate 2L size PET bottles. We have published various load measurement videos using Imada products on our website. ▼ Please check the URL below for measurement videos related to food packaging and beverage containers.

• Other measuring instruments

Imada, a specialized manufacturer of load measurement equipment, offers a variety of products necessary for load measurement, including force gauges (load measuring devices), electric measurement stands, and attachments. This document introduces examples of product configurations that can be used for 90-degree and 180-degree peel tests, focusing on adhesive tape peel testing. [Contents of the Document] - Examples of product configurations for 90-degree and 180-degree peel tests - Introduction of helpful products that enhance the reproducibility and efficiency of peel tests - Basic knowledge related to adhesive tape peel tests, including commonly used units - Other examples of peel tests *For more details, please view the document via "PDF Download" or feel free to contact us.*

• Other measuring instruments

The "ATP-50N" is a peeling test attachment used in combination with Imada's force gauge (load measuring device). The Imada force gauge, when combined with the attachment, enables various load measurements. 【Features of ATP-50N】 - It is an attachment designed to efficiently conduct peeling tests of adhesive tapes. - You can simply stick the sample adhesive tape onto the plate part to hold the sample in place. - There is no need to adjust the length of the sample on the holding side, making it easy to set up the sample for a 90-degree peeling test. - It comes with scale lines to help attach the sample straight to the center of the fixture. ■ For Imada force gauges and related peeling test fixtures, please refer to the related products at the bottom of the page. ■ We also offer measurement stands that improve measurement stability and software that is convenient for graph creation and data analysis. For more details, please visit our website. * Our website features various load measurement and peeling test videos using Imada products. ▼ We are currently showcasing videos of various peeling tests at the URL below, so please take a look.

• Other analytical equipment

The "TC-DT-5N" is an attachment designed to efficiently conduct screw cap opening inspections when combined with the Imada screw cap torque meter DTXS/A series. The Imada screw cap torque meter can achieve various torque measurements through its combination with the attachment. 【Features of TC-DT-5N】 - It can be mounted on the standard table DT-TB, allowing for one-touch tightening and loosening of the clamp. - It improves testing efficiency in scenarios where the same size and shape samples are repeatedly tested. - The elimination of handle operation reduces the strain on the operator's wrist. ■ For information on the Imada screw cap torque meter, please refer to the related products at the bottom of the page. ■ We also offer measurement stands that enhance measurement stability and software that is convenient for graph creation and data analysis. For more details, please visit our website. * Our website features various videos demonstrating load and torque measurements using Imada products. ▼ Videos of various torque measurements are also available at the URL below, so please take a look.

• Other measuring instruments

The "SPC-10N" is an attachment for measuring the opening force of spout pouch caps, used in combination with the Imada screw cap torque meter DTXS/A series. The Imada screw cap torque meter can achieve various torque measurements when combined with this attachment. 【Features of SPC-10N】 - It is ideal for measuring the opening force of screw caps on spout pouches used for refillable containers. - The mechanism that fixes the base of the sample allows for the measurement of the opening force of spout pouch caps, which are prone to deformation. - It can accommodate samples with a base cap size of 6 to 26 mm (depth and width). ■ For information on Imada screw cap torque meters, please refer to the related products at the bottom of the page. ■ We also offer measurement stands that improve measurement stability and software that is convenient for graph creation and data analysis. For more details, please visit our website. * Our website features various videos demonstrating load measurements and torque measurements using Imada products. ▼ You can also find videos of various torque measurements at the URL below, so please take a look.

• Other measuring instruments

By combining Imada-made load cells and accessories, it is possible to measure the pressing force with your fingers. For details on the products used for measurement, please refer to the detailed information or video release page at the end of this page. 【Features】 ■ By fixing the load cell to your fingertips, it enables the measurement of sample loads that are difficult to measure with a measurement stand and force gauge. ■ The pressing force of spray levers and other devices can be measured with movements that are close to actual use. ■ With a high-speed sampling rate of up to 2000Hz, it can track rapid changes in load, allowing for more accurate peak value acquisition. ■ By adjusting the length of the band, it can be attached to various places, including not just fingers but also the palm of the hand. It is compatible with various samples such as measuring the operating force of levers, switches, and various tools. There is also PC software available for obtaining load-time graphs (see detailed information at the bottom of the page). Our website features various load measurement videos using Imada products. ▼ A video on "Measuring the Feel of Spray Lever Pressing" is also available at the URL below, so please take a look.

• Non-destructive testing

By combining Imada's load measuring devices and jigs, it is possible to conduct cantilever bending measurements of cutlery. For details on the products used in the measurements, please refer to the detailed information on the latter half of the page or the video release page. 【Features】 ■ The use of a force gauge (load measuring device) allows for the quantification of resistance. ■ High-speed sampling at 2000Hz enables tracking of rapid and subtle changes in load. ■ By gripping only one side, which is the handle, measurements can be taken that reflect actual use. ■ Support positions and pressing positions can be easily set. ■ By using the software included with the load displacement measurement unit, it is possible to create load-displacement graphs. ■ High-speed data communication at 2000Hz allows for smooth graph rendering. In addition to spoons, forks, and knives, it accommodates various samples such as toothbrushes and straws. There are also jigs for three-point bending tests available separately (see detailed information at the bottom of the page). Our website features various load measurement videos using Imada products. ▼ The video on "Cantilever Bending Measurement of Cutlery" is also available at the URL below, so please take a look.

• Other measuring instruments

This is a food texture testing attachment specifically designed for the Imada-made rheometer FRTS series. The combination of the rheometer and the attachment allows for various food texture tests. 【FR-EC Series】 The FR-EC series features a spherical probe capable of localized compression and puncture. It is ideal for measuring the hardness of jelly, tofu, rice, beans, and more. 【FR-NB-80】 The FR-NB-80 is a knife blade optimal for measuring samples that are highly elastic and difficult to cut. It can be used for samples such as meat and fish, which may not be easily cut with a wedge-shaped probe. 【FR-CUP-4020】 The FR-CUP-4020 is a measurement sample container ideal for measuring the hardness of food for the elderly and those with swallowing difficulties. It allows for measurements that partially comply with the standards of the Japan Care Food Association for food for individuals with swallowing difficulties. In addition to the above, we offer a variety of attachments for food texture testing. For more details, please check the PDF or our company website. *We have published various load measurement videos using Imada products on our company website. ▼ Please check the following URL for testing videos aimed at the food industry.

• Other measuring instruments

The FBO-CFX is a fixed belt for the Imada-made small flat load cell "CFX series." It can be securely attached to fingers or tools, allowing for measurements that closely resemble actual movements. It can also be used for samples that are difficult to measure with measurement stands or force gauges. 【Features of FBO-CFX】 - It is a fixed belt designed to be attached to the Imada-made small flat load cell "CFX series." - It uses hook-and-loop fasteners for secure attachment, allowing for a snug fit according to the size of fingers or tools. - It comes with hook-and-loop fasteners of 9 cm and 25 cm, making it possible to wrap around various objects. ■ For information on Imada load cells CFX and displays, please refer to the related products at the bottom of the page. * Our website features various load measurement videos using Imada products. ▼ Videos of various compression tests are also available at the URL below, so please take a look.

• Other measuring instruments

The GRP-50 is an auxiliary tool that helps in applying adhesive tape to the peeling test jigs made by Imada. Since the samples are applied parallel to the test direction, it contributes to improved measurement accuracy. Together with the film cutter FSC-1525 and the peeling test pressure roller APR-97 series, it enhances the efficiency and accuracy of peeling tests. 【Features of GRP-50】 - It is an auxiliary tool useful for applying adhesive tape to the stainless steel panels of Imada's peeling test jigs P90-200N and P180-200N. - It allows for efficient application of samples under the same conditions. - It can be used for samples up to 50mm in width. ■ For Imada's peeling test jigs and accessories, please refer to the related products at the bottom of the page. *Various load measurement videos using Imada products are available on our website. ▼ You can also find videos of various peeling tests at the URL below, so please take a look.

• others

The CBJ-200N is a compression testing attachment used in combination with Imada's force gauge (load measuring device) and measurement stand. The Imada force gauge, when combined with the attachment, enables various load measurements. 【Features of CBJ-200N】 - It is ideal for load measurements performed by gripping only one side, such as measuring the strength of spoons and chopsticks. - The support position and pressing position of the sample can be easily set according to the scale. - It allows for efficient sample setting under the same conditions, making it suitable for comparative testing and testing of multiple samples. ■ For Imada force gauges and measurement stands, please refer to the related products at the bottom of the page. ■ We also offer software that is convenient for graph creation and data analysis. For more details, please visit our website. * Our website features various load measurement videos using Imada products. ▼ Videos of various compression tests are also available at the URL below, so please take a look.

• Other analytical equipment

By using the dedicated testing machine manufactured by Imada, tensile strength testing of wire harness crimp terminals that partially complies with JIS standards can be achieved. Please refer to the detailed information on the latter half of the page for the products used in the measurement. 【Features】 ■ The use of a dedicated testing machine enables tensile strength testing (durability testing) of wire harness crimp terminals (※). ■ The crimp terminal is pulled with a specified load for a specified time to test whether the crimp comes loose. ■ With the push of a button, the measurement operation, OK/NG judgment, and data saving can be completed, simplifying the entire process. ■ Up to 26 patterns of measurement conditions can be saved, reducing setup time. ■ The included dedicated software allows for management of measurement data, output to a PC, and editing of measurement conditions. ※ Testing that partially complies with "JIS C5402-16-4:2012" and "UL 486A-486B:2013" is also possible with the same dedicated testing machine. We hope this will be useful for the quality evaluation and quality control of wire harnesses and cable crimp terminals. Our company website features various load measurement videos using Imada products. ▼ Please check the URL below for many measurement videos related to "industrial machinery and parts."

• Other measuring instruments

By combining Imada's load measuring devices and jigs, it is possible to conduct puncture resistance tests on vials that partially comply with ISO standards. For details on the products used in the measurements, please refer to the information at the end of this page or the video release page. 【Features】 ■ The use of a force gauge allows for quantification of resistance values. ■ High-speed sampling at 2000Hz enables accurate peak resistance values to be obtained. ■ The needle base can be directly connected to the force gauge (load measuring device), eliminating the need to remove the needle tube. ■ Vials can be securely fixed to the measurement stand, allowing for stable testing. ■ Software can be used to create time-load graphs. ■ Measurements can be conducted that partially comply with ISO standards. *If you wish to measure the relationship between load and displacement, please consult us as the combination of products will differ. *By changing the specifications of the jigs and stands, tests that partially comply with ISO 7864:2016 can also be achieved. Please make use of this for quality evaluation and quality control of rubber stoppers and injection needles for vials. We have released various load measurement videos using Imada products on our website. ▼ The video on "Puncture Resistance Testing of Vials" is also available at the URL below, so please take a look.

• Other measuring instruments

The "TFX Series" is a non-rotating load cell that can measure torque (twisting force). It features through holes in the upper and lower flanges, making it ideal for integration into equipment for measurement. 【Features】 ■ Compact load cell with dimensions φ35xH28mm ■ Capable of measuring torque (twisting force) ■ Through holes in the upper and lower flanges, perfect for integration into equipment ■ Waterproof and dustproof protection rating IP64 You can choose between an integrated type that comes with a display unit (separate type force gauge) and a type that allows multiple load cells to be connected to a single display unit (eZ-Connect series). *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "HTGS/HTGA-TFX Series" is a digital torque meter with an external flange-type torque sensor. It is ideal for measuring torque values when integrated into torque testing machines or production lines. 【Common Features of the HTGS/HTGA-TFX Series】 ■ High-speed sampling (2000Hz) to follow sudden changes in load values ■ Compact flange-type torque sensor with through holes for easy integration into equipment ■ Bright and easy-to-read OLED display ■ Various output functions such as USB, RS232C, and analog for integration with equipment ■ Data management with included software and analysis with separately sold graphing software ■ Products eligible for the Next Series can download additional features and manuals for measuring instruments and software via the web (Firmware Ver.5 and later) 【Features of the HTGA-TFX Series】 ■ Allows for angle display and output by using a custom angle meter (sold separately) ■ Continuous data can be saved to a USB memory stick ■ Various screen displays, including measuring and displaying two-stage peak values *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "CHX Series" is a small compression load cell in a washer shape. It is ideal for measurements in narrow spaces and for measuring the pressure input of components. 【Features】 - Washer type with a through hole - Compact size of φ25×H7.1mm to φ30×H14mm - Waterproof and dustproof protection rating IP64 There is also an integrated type that comes with a display unit (separate type force gauge) and a type that allows multiple load cells to be connected to a single display unit (eZ-Connect series). *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "CLFX series" is a flat-type thin compression load cell with a wide load-bearing area. It is ideal for measurements in narrow gaps and for compressing soft or spherical samples. 【Features】 - Thin design with a height of 6mm - Wide load-bearing area for excellent measurement stability - Can be integrated into equipment using male threads - Waterproof and dustproof protection rating IP64 There is also an integrated type that comes with a display unit (separate type force gauge) and a type that allows multiple load cells to be connected to a single display unit (eZ-Connect series). *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "CFX Series" is a compact compression load cell with a wide load-bearing surface. It is ideal for measurements in narrow spaces and for compressing soft or spherical samples. 【Features】 - Compact size of φ15×H9mm - Wide load-bearing surface for excellent measurement stability - Allows for the attachment of jigs using male threads and integration into equipment - Waterproof and dustproof protection rating of IP64 There is also an integrated type that comes with a display unit (separate type force gauge) and a type that allows multiple load cells to be connected to a single display unit (eZ-Connect series). *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The SCX series is an ultra-compact load cell that can be used for a wide range of applications in both compression and tension. It features male threads at both ends of the sensor, making it suitable for integration into equipment. 【Features】 ■ Ultra-compact load cell measuring W12×D16×H19.1mm ■ Usable for measuring loads in both compression and tension ■ Male threads at both ends of the sensor, ideal for integration into equipment ■ Waterproof and dustproof protection rating IP65 ■ Equipped with a mechanical stopper to prevent failure due to overload (*1) *1 Does not completely prevent failure. There is also an integrated type that comes with a display unit (separate type force gauge) and a type that allows multiple load cells to be connected to a single display unit (eZ-Connect series). *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "MED-VH-5N" is a fixture for securing vials to a measurement stand. It can be used for testing the puncture resistance of the rubber stoppers on vials. It is compatible with all sizes of vials as specified in ISO8362-1 and ISO8362-4. The height of the holder and the position of the table can be adjusted to fit the size of the vial. 【Features】 ■ Enables testing of the puncture strength of the elastomer sealing the vial ■ The height of the holder and the position of the table can be adjusted to fit the size of the vial ■ Allows for measurements that partially comply with ISO standards We also offer fixtures for securing injection needles to force gauges by needle base. Luer fitting connection fixture MED-LFA-20N series - https://www.forcegauge.net/product/detail/med-lfa *For more details, please refer to the PDF document or feel free to contact us.

• others

The "MED-LFA-20N series" is an adapter that allows injection needles to be attached to a force gauge by the needle base. This eliminates the hassle of removing the needle tube, thereby improving the efficiency of measurements such as puncture resistance tests on vials. Three types are available according to the shape of the luer fitting. 【Features】 ■ Direct connection of the needle base to the force gauge eliminates the need to remove the needle tube. ■ Three types available according to the shape of the luer fitting. ■ Measurement partially compliant with ISO standards is possible. We also offer a fixture for securing vials to the measurement stand. Vial Fixing Fixture MED-VH-5N - https://www.forcegauge.net/product/detail/med-vh *For more details, please refer to the PDF document or feel free to contact us.

• others

The "DXE/DXV/DXP series" is a custom product based on the mechanical tension meter DX2 series. It features a small roller for confined spaces, allowing measurements in tight areas with limited space. By attaching the included finger support to the back, the guide roller can be easily moved, and there are mounting holes on the back that allow it to be fixed to equipment for continuous tension measurement. 【Features】 ■ Small roller for confined spaces ■ Measurement possible in tight areas with limited space ■ Easy movement of the guide roller by attaching the included finger support to the back ■ Mounting holes on the back for fixing to equipment for continuous tension measurement *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "DXB/DXT/DXR series" is a custom product based on the mechanical tension meter DX2 series. It quickly displays fluctuating tension in an analog format, making production process management easier. It can measure a wide range of samples such as tapes, bands, and films. Additionally, flanges attached to both ends of the roller prevent samples from slipping off, allowing for accurate measurements. 【Features】 ■ Can measure a wide range of samples such as tapes, bands, and films ■ Quickly displays fluctuating tension in an analog format ■ Facilitates easy production process management ■ Flanges at both ends of the roller prevent samples from slipping off ■ Allows for accurate measurements *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "VWF-10N-J" is a device used to measure the frictional force between flat test specimens such as paper and contactors like pens. By changing the contactor holder, it can measure a variety of samples, and it also supports vertical load adjustment using weights and the measurement of reciprocating frictional force. Using separately sold graphing software, the static friction coefficient and average dynamic friction coefficient can be easily calculated. 【Features】 ■ A device for measuring the frictional force between flat test specimens such as paper and contactors like pens ■ Can measure a variety of samples by changing the contactor holder ■ Supports vertical load adjustment using weights and measurement of reciprocating friction *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

Multi-Load-Time (Torque-Time) Graphing Software 'Force Recorder Plus' allows you to graph the measurement results from up to 4 measuring devices simultaneously. It can display different units on a single screen, making it easy to compare up to 10 graphs overlaid on top of each other. For security, it offers operation history tracking and password settings. 【Features】 ■ Simultaneously graph measurement results from up to 4 measuring devices ■ Display different units (e.g., load in N and torque in N-m) on a single screen ■ Easily compare up to 10 overlaid graphs ■ For security, operation history tracking and password settings are available *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

We would like to introduce the "communication cables" handled by Imada Co., Ltd. Starting with the analog cable "CB-108," which connects to analog devices and records changes in measurement values, we offer a wide range of products including the RS232C cable "CB-203" and the digital cable "CB-308." With our extensive selection of cables, we can meet various load measurement needs. Custom orders are also available to match measurement conditions, so please feel free to consult with us. 【Product Lineup (Excerpt)】 ■ Analog Cable "CB-108" ■ Analog Cable (-AN compatible) "CB-118" ■ RS232C Cable "CB-203" ■ RS232C Cable "CB-208" ■ Digital Cable "CB-308" *For more details, please refer to the PDF document or feel free to contact us.

• Information and communication equipment and infrastructure

The "HT Series" is an attachment for the HTGS/HTGA series. To accommodate various measurements unique to hand use, a wide range of attachments is available. By changing the attachments, you can measure the torsional durability of a wide variety of samples, as well as the tightening and loosening torque of screws and bolts. 【Features】 ■ A wide range of attachments available ■ By changing attachments, you can measure the torsional durability of various samples, as well as the tightening and loosening torque of screws and bolts ■ Similar attachments can be installed on the eHT series and SDT series for measurement *For more details, please refer to the PDF document or feel free to contact us.

• Other analytical equipment

We would like to introduce our interlock cover for measurement stands, 'OP-MX2EMX-IC/OP-MX250-IC'. This product is a cover designed to prevent the scattering of measurement objects, enhancing safety during machine operation by stopping the machine's operation when the door is open. It can be utilized for preventing the scattering of measurement objects as well as for preventing entrapment in the machine. 【Features】 ■ Interlock cover for preventing the scattering of measurement objects ■ Used by attaching to electric measurement stands ■ Enhances safety during machine operation by stopping operation when the door is open (MX2 series measurement stands require the -CN option) ■ Custom orders for changes in material and size of the cover are accepted *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• others

The "XY-500N Series" is a slim XY table that can support a maximum load of 1000N. It allows for fine adjustments of the sample position in both the X and Y directions. It is well-suited for compression and tensile testing of samples that require precise alignment, such as circuit boards, and you can choose from three types according to your measurement needs. 【Features】 ■ Fine adjustments of the sample position in the X and Y directions are possible (only for XY-500N-M8/BB) ■ Slim design minimizes height, effectively utilizing the stroke of the measurement stand ■ Ideal for securing samples that require precise alignment, such as circuit boards ■ Available in three types to suit your measurement needs *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Muscle Kit" is a product that can measure the magnitude of force (workload) involved in tasks such as strength and moving objects. By changing the attachment pads, it can accommodate various body parts and measurement conditions. We offer three types that can be selected according to the measurement level and data management. 【Features】 ■ Measure the workload of various body parts with six types of attachment pads ■ Comes with a carrying case that can be transported with the handle attached ■ Ready for immediate measurement upon removal ■ The maximum measured value can be saved along with the date and time on the main unit or USB memory (RDSV/RZTA only) *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "CA Series" is a screw diameter conversion adapter that supports a maximum load of 20kN. It allows for the attachment of various accessories to force gauges and other devices. Please choose according to the products you have or plan to purchase. 【Lineup (Excerpt)】 <For Force Gauges> ■CA-F6T4 / Screw Diameter: M6 (Male) → M4 ■CA-F6T10 / Screw Diameter: M6 (Male) → M10 ■CA-F10T6 / Screw Diameter: M10 (Male) → M6 <For Rheometer FRTS> ■CA-F4T6 / Screw Diameter: M4 (Male) → M6 *For more details, please refer to the PDF document or feel free to contact us.

• others

The "ZEF/ZED series" is a low-cost handheld digital tension meter with an LCD display. Even in cases of significant tension changes, stable readings can be obtained thanks to the damping function. You can choose between the "ZEF series" and "ZED series" based on the specifications of the rollers. 【Features】 ■ Easily readable with a digital LCD display ■ Equipped with a guide roller for stable measurements ■ Made of high-strength plastic ■ Automatic zero reset function allows zero resetting at any position ■ Option to change the guide roller *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "KV-50N" is a compact manual measurement stand that allows for fine adjustments by rotating the knob. With a body weight of approximately 2kg and a compact design, it can be easily transported even with a force gauge attached. The movement amount is 1mm per rotation of the knob, enabling precise adjustments. Additionally, it can be customized for various specifications to suit measurements, such as adding a length measuring device (optional) or changing the table stroke (custom order). 【Features】 ■ Easy to transport ■ Allows for fine adjustments ■ Supports a wide range of measurements with various options and customizations *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "JF6-50N/EJ6-1000N/EJ10-5000N" is an attachment adapter designed for smooth adjustments of the sample's fixation, gripping position, and angle. It can be set up in an easy-to-follow manner that matches the sample, allowing for a smooth testing process. Additionally, it can be used in conjunction with a chuck-type fixture for sample fixation. 【Features】 - Allows for smooth measurement preparation as the sample can be set at hand on the fixture. - Usable for tensile testing. - Can be used in combination with a chuck-type fixture for sample fixation. - Available in three types based on load values. *For more details, please refer to the PDF document or feel free to contact us.

• others

The "DT Series" is a digital tension meter (tension gauge) capable of measuring up to 60daN (600N). It allows for easy measurement of the tension during the feeding and winding of fibers and wires by clamping with a lever. It can store and select calibration data for different wire diameters, enabling accurate measurement of multiple samples. 【Features】 ■ Capable of measuring high loads up to 60daN (600N) ■ Compatible with samples of different wire diameters ■ Measurement possible during feeding and winding ■ Accurate measurement with high-speed internal sampling ■ Some settings can be locked with a password *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "WL01 Series" is a unit that allows data to be received wirelessly, even from a distance. It can be integrated into the customer's unique system using the communication format. With data reception detection and interference prevention features, it supports reliable transmission. 【Features】 ■ Reliable data transmission capability ■ Data interference and leakage prevention features ■ Adoption of 128-bit AES encryption technology to maintain the security of wireless communication ■ The communication format is publicly available for use in the customer's unique system ■ A single receiver can receive data from multiple wireless transmission adapters *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "RTM-400" is a tram tension meter suitable for measuring the tension of V-belts and toothed belts. It reads the vibration frequency of the belt and measures the tension. It comes with two sensors, allowing measurements to be tailored to the measurement location. 【Features】 ■ Measurement can be performed with simple operation ■ Sensors can be swapped according to the measurement ■ Display can be in Hz or N (Newtons) ■ Ideal for measuring the tension of V-belts and toothed belts *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "PSM Series" is a mechanical force gauge suitable for precise measurements, featuring fine graduations. It allows for peak value measurement with a "stop needle mechanism" that holds the needle at the peak value (ON/OFF available). The "pointer zero point adjustment mechanism" enables correction for the weight of attachments and other items. Since it does not require power, it can be used even in the absence of a power supply. 【Features】 ■ Ideal for simple load measurements performed by hand. ■ Usable for both compression and tension. ■ By attaching an optional handle, stable loading can be achieved with both hands. ■ When used in combination with a manual stand, it enables highly reproducible measurements. ■ The fine graduations allow for accurate reading of measurement values. ■ Durable construction and no power supply required. *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments