イマダ List of Products and Services

The "PGC Series" is a pantograph chuck suitable for tensile testing of a wide range of samples, including electronic component lead wires, films, paper, and rubber. Its mechanism, similar to that of a clothespin, allows the tips to open widely, making it easy to attach and detach samples. When pulled, the clamping force automatically increases, enabling measurements to be conducted easily and accurately. You can choose from three types: the "PGC-0505," which is ideal for measuring objects in narrow spaces; the lightweight standard type "PGC-0510"; and the high-load type "PGC-2530," which has a maximum load of 2500N. 【Features】 ■ Enables easy and accurate measurements ■ Sample attachment and detachment is easy with a clothespin-like mechanism ■ Suitable for tensile testing of electronic component lead wires, films, and more *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The GT series is a sample holding vice fixture used in combination with Imada-made force gauges (load measuring devices) and measurement stands. The Imada force gauges can achieve various load measurements through combinations with measurement stands and attachments. 【Features of the GT Series/GTW Series】 - A wide range of options is available for selection. - The lever-type single-opening vice fixture of the GT series comes in four different products based on jaw and maximum load differences. ■ For Imada measurement stands, please refer to the related products at the bottom of the page. ■ We also offer software that is convenient for graph creation and data analysis. For more details, please visit our website. * For more information, please refer to the PDF materials or feel free to contact us. * The GT-30 can also be purchased from Amazon (link below).

• Other measuring instruments

The FP series is a tensile testing attachment designed to be used in combination with Imada's force gauge (load measuring device). The Imada force gauge, when combined with the attachment, enables various load measurements. 【Features of the FP Series】 - Ideal for gripping thin samples such as fibers, hair, and soft wires. - The tip is narrow, allowing for clamping of a targeted single strand even in densely packed samples like toothbrush bristles. - Suitable for measurements in confined spaces. - Lightweight, making it possible to attach to low-load range force gauges for measuring low loads. ■ For information on Imada force gauges, please refer to the related products at the bottom of the page. ■ We also offer measurement stands that improve measurement stability and software that is convenient for graph creation and data analysis. For more details, please visit our website. *Various load measurement videos using Imada products are available on our website. ▼ Videos of various tensile tests are also available at the URL below, so please take a look.

• Other measuring instruments

The "APR-97 Series" is a pressure roller for peel testing that can adhere samples such as adhesive tape at a constant pressure. 【Features】 ■ By adhering samples at a constant pressure, it enables more accurate measurement of peel strength. ■ Two models with different roller masses are available for selection. ■ Customization options such as size changes and electrification are also available upon request. * For more details, please refer to the PDF document or feel free to contact us. * APR-97-2K is also available for purchase on Amazon (link below).

• others

The "BC-15/PGC-BC" is a tensile testing device used in conjunction to easily measure the sewing strength of buttons. Samples can be attached with a single touch, allowing for efficient measurement. It can accommodate a maximum load of 300N and can easily and accurately measure buttons with a maximum diameter of 15mm. 【Product Specifications (Excerpt)】 ■BC-15 (Button Fixing Fixture) 　・Weight: Approximately 1220g 　・Maximum Sample Diameter: φ15mm 　・Maximum Sample Height: 3.5mm ■PGC-BC (Button Tensile Fixture) 　・Weight: Approximately 125g 　・Hook Pass Hole: φ6 　・Opening Width: Maximum 20mm *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "FSC-1525" is a cutter that can cut film and paper to a fixed width, making it an efficient product for preparing tests. By using the included width adjustment block, it can be adjusted to a width of 15mm/1 inch. Additionally, it is possible to purchase just the blades separately, and we also accommodate custom specifications for cutting widths that differ from the standard product. 【Specifications (excerpt)】 ■ Model: FSC-1525 ■ Cutting width (mm): 15–70mm ■ Width adjustment block: 15mm/1 inch ■ Accessories: 4 spare replacement blades (2 sets) *For more details, please refer to the PDF document or feel free to contact us. *You can also purchase the product from Amazon (link below).

• others

The CP-150N is a tensile testing attachment designed to be used in combination with Imada's force gauge (load measuring device). The Imada force gauge can achieve various load measurements when combined with the attachment. 【Features of CP-150N】 - Ideal for gripping wire-like samples. - Can be used for samples up to φ3.2mm by replacing the included collet. - Compact and lightweight, making it suitable for measurements in tight spaces and for low load range measurements. - Can be used for both compression and tensile tests. ■ For Imada force gauges, please refer to the related products at the bottom of the page. ■ We also offer measurement stands to improve measurement stability and software convenient for graph creation and data analysis. For more details, please visit our website. * Our website features various load measurement videos using Imada products. ▼ Videos of various tensile tests are also available at the URL below, so please take a look.

• Other measuring instruments

The "PCA-150N" is a gripping force measurement device that can handle a maximum load of 150N, allowing for the measurement of the gripping force, pinching force, and opening force of samples. It accommodates a wide range of samples, from industrial tools like tweezers, pliers, and clips to everyday products. The opening width can be easily adjusted using the scale. Measurement can be performed simply by attaching a force gauge, and it is lightweight and easy to carry. 【Features】 ■ Supports a maximum load of 150N ■ Capable of measuring a wide variety of samples from industrial tools to everyday products ■ Easy adjustment of opening width using the scale ■ Lightweight and easy to transport *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "UR Series" is a urethane spherical compression fixture that can handle a maximum load of 50N, making it ideal for compressive measurements of areas operated by fingers, such as buttons on devices. It prevents damage to the measurement target and can also be used for final inspections before shipping. You can choose from two types of hardness. Additionally, customizations such as changes in dimensions, materials, and load capacity can be accommodated to suit samples and measurement conditions. 【Features】 ■ Spherical urethane material compression fixture ■ Feels similar to pressing the sample with a finger ■ Prevents damage to the measurement sample ■ Usable for final inspections before shipping ■ Customization available according to requests *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "LIGHT/MICRO/MEDIO/MACRO series" is a robust and easy-to-handle spring scale that allows for simple load measurements in various environments. It features internal cleaning capabilities, high maintenance efficiency, and exceptional durability. Using high-quality Swiss springs, each unit is meticulously fine-tuned by skilled craftsmen, enabling highly reproducible and precise measurements. 【Features】 ■ Easy maintenance ■ Special printing that resists fading of the scale ■ High reproducibility in measurements ■ Convenient for portability ■ Capable of both compression and tension with the compression kit specifications *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "PG Series" is a local compression fixture that supports a maximum load of 200N. It is suitable for penetration tests and hardness measurements over a fixed area, such as sponge hardness testing. Due to its small size and lightweight, it can also be used for measurements in low load and narrow spaces. 【Features】 ■ Compact and lightweight ■ Cylindrical fixture with a tip diameter of 2 to 5 mm ■ Ideal for penetration tests and hardness measurements over a fixed area ■ Usable in narrow spaces ■ Customization is available to match samples and measurement conditions *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• others

The "SQ Series" is a rectangular compression testing jig that can handle a maximum load of 5000N. Thanks to its free joint design, which allows for a range of 15 degrees in all directions, it can be closely aligned with the sample, enabling accurate measurements. It is suitable for testing the pressure resistance of sealed packs such as retort foods and for measuring the hardness of balls. 【Features】 ■ Ideal for high-load compression and destruction tests up to 5000N ■ Capable of measuring the pressure resistance of tablets and plastic packages ■ Free joint design allows for closer contact with samples (SQ-5075/SQ-5150) ■ Magnetic type allows for easy attachment and detachment of contact points (SQ-5075/SQ-5150) ■ Customization is available to suit samples and measurement conditions *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• others

The "SP Series" is a spherical compression testing fixture that can handle loads up to 5000N. It is suitable for measurements that require pinpoint pressure, such as tablet crushing strength tests, rather than surface pressure. The outer diameter of the sphere can be selected from 10mm, 20mm, or 30mm to match the measurement sample, and custom modifications such as dimensions, materials, and load capacity changes can be accommodated based on the sample and measurement conditions. 【Features】 ■ Suitable for high-load compression and destruction tests up to 5000N ■ Capable of measuring the compressive force and destruction strength of various samples, including cushioning materials ■ The outer diameter of the sphere can be selected from 10mm, 20mm, or 30mm to match the measurement sample ■ Custom modifications are possible to accommodate samples and measurement conditions *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• others

The "PC Series" is a disc-shaped compression testing jig that can accommodate a maximum load of 5000N. Thanks to its free joint design, which allows for a range of 15 degrees in all directions, it can closely contact the sample, enabling accurate measurements. It is suitable for compression tests such as pressure resistance tests for sealed packs of retort foods, hardness tests for balls, and buckling strength tests for PET bottles. 【Features】 ■ Suitable for high-load compression and destruction tests up to 5000N ■ Free joint design allows for better contact with the sample ■ Capable of measuring the pressure resistance of PET bottles and retort foods ■ The outer diameter of the disc can be selected from 40mm, 60mm, or 100mm according to the measurement sample ■ Customization is available to match the sample and measurement conditions *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• others

The "A-40/60・S-40/40-SL/60" is a circular flat compression testing jig that can handle a maximum load of 1000N. It is suitable for compression tests such as measuring the crushing strength of tablets, as it can press the sample on a surface. You can choose the material (aluminum or steel) and dimensions (diameter of 40mm or 60mm) according to the load and application. Custom options are also available, including material changes, dimension changes, free joint designs, and designs for specified areas. 【Features】 ■ Usable for a wide range of compression measurements ■ Ideal for testing the crushing strength and buckling strength of sponge, rubber, and balls ■ Material (aluminum: A and steel: S) and diameter (40mm and 60mm) can be selected according to measurement needs ■ The S-40-SL, which has a slit for air escape, is optimal for measuring the buckling strength of PET bottles ■ Custom options are available for material changes, dimension changes, free joint designs, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "SDT Series" is a manual rotation assist device specifically designed for the DTXS/A series. By continuously turning the knob, you can maintain the rotation of the measurement sample for ongoing measurement, and by combining it with attachments tailored to the sample (sold separately), it is possible to measure various torques as a simple testing machine. Additionally, when combined with an angle gauge, it is also possible to analyze the torque-angle relationship. 【Features】 ■ Manual rotation assist device specifically for the DTXS/A series ■ Continuous measurement of sample rotation by continuously turning the knob ■ By combining with sample-specific attachments (sold separately), it can measure various torques as a simple testing machine ■ It is also possible to analyze the torque-angle relationship when combined with an angle gauge *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "RSH Series" is a rotational auxiliary fixture suitable for torque measurement in the horizontal direction for HTGS/A. It enables torque measurement for small motors and for turning volume switches. The stage position can be easily changed with lever operation, making it easy to attach and detach samples. Additionally, the sensor position can move up to 105mm, allowing for the measurement of samples of different sizes. By allowing free movement on the stage, it is also possible to measure samples that experience forward and backward movement due to rotation, such as screws. 【Features】 - Easy stage position adjustment with lever operation - Simple attachment and detachment of samples - Capability to measure samples of different sizes - Ability to measure samples that experience forward and backward movement due to rotation - Possible to analyze the torque-angle relationship when combined with an angle gauge *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "ST-SS" is a safety shield used in conjunction with a measurement stand to prevent the scattering of measured objects. The panel position can be adjusted up and down to match the position of the measurement sample. The panel can be opened and closed for easy knocking. Please use it when there is a risk of debris affecting the measurer, such as during destructive testing. Customizations such as changes in material and size of the cover are available. 【Features】 ■ Shield for preventing scattering of measured objects ■ Helps ensure the safety of the measurer during destructive tests or tests where scattering is expected ■ Panel position can be adjusted up and down to match the position of the measurement sample ■ Panel can be opened and closed for easy knocking ■ Customization options available for changes in material and size of the cover *For more details, please refer to the PDF document or feel free to contact us.

• partition
• Safety and consumables

The "SJS-100N-L/S" is a stage designed for solder joint strength testing, capable of handling a maximum load of 100N. It is suitable for measuring the solder joint strength of QFP leads and chip components. Fine adjustments of the sample position in the X and Y directions are possible. By adjusting the orientation of the attachment, solder joint strength tests can be conducted at angles of 45 degrees and 90 degrees. 【Features】 ■ Stage for fixing substrates during solder joint strength testing ■ Substrate mounting angles can be switched between 45° and 90° ■ Even for small pitch leads and tiny chip components, fine positional adjustments can be made using the XY table *For more details, please refer to the PDF document or feel free to contact us.

• others

The "AMK Series" is an angle measurement unit that enables torque-angle measurement by connecting to the handheld torque gauge HTGA series. We offer the standard "AMK-360" and the "AMKL-360" for low torque ranging from 0.5 to 2 N-m. The minimum resolution is 0.1°, and the angle measurement range is from 0.1° to 9999.9°. We have custom examples available in 2-legged types, 4-legged types, and handle-type supports. Please feel free to contact us when you need assistance. 【Features】 ■ Connects to the handheld torque gauge HTGA series ■ Enables torque-angle measurement ■ Measurement angle range is from 0.1° to 9999.9° *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "XST-500N" is an X-axis slide stage that supports a maximum load of 500N. It facilitates the horizontal (X-axis) movement of samples and lower fixtures, improving the workability of alignment for measurements. Samples that cannot be centered can also be fixed in an offset position. 【Features】 ■ Mounted on the measurement stand side, it makes horizontal (X-axis) movement of lower fixtures easy. ■ Enhances the workability of aligning samples and lower fixtures. ■ Allows samples and lower fixtures to be fixed in an offset position. *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "SHF Series" is a fixture for both ends that can handle a maximum load of 100N. It is suitable for testing caps of the covering type (over caps). Unlike grip-type fixtures, it allows for hooking the over cap at both ends, enabling tensile testing without crushing or damaging the sample. 【Features】 ■ Allows for hooking and pulling the sample from both ends ■ Ideal for tensile testing of caps and cap-shaped samples ■ Standard and long-arm type products can be selected according to the size of the sample *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

The "PTW-10IN/OT-8IN" is an optional tray used when mounted on a measurement stand. It can be used as a receptacle for measuring the opening force of jelly cups or cans, where the contents may spill out, by securing and placing it under the attachment. The applicable attachments are the simple 45-degree peeling test fixture "P45-50N," the food and beverage can opening fixture "PT series," and the syringe compression test fixture "MED-SCT-500N." (Only for PTW-10IN) 【Features】 ■ Can be mounted on a measurement stand ■ Prevents contents from spilling during measurement ■ Helps prevent dirt on the stand *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

We would like to introduce our cap clamp fixture, the "CCJ Series." It can securely hold cylindrical samples from four directions. It is suitable for insertion or removal tests of cosmetic caps and round connectors. You can choose from standard pins, serrated pins, or long pins according to your application. 【Lineup】 ■CCJ-100N ■CCJ-100N-01 ■CCJ-100N-02 ■CCJW-100N ■CCJW-100N-01 ■CCJW-100N-02 *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

We handle the universal joints 'UJ6-1000N/UJ10-5000N'. With a free joint design, it is possible to adhere more closely to the sample. This is an attachment to prevent uneven loading caused by the position and shape of the sample. You can choose between "UJ6-1000N" compatible with M6 mounting screws and "UJ10-5000N" compatible with M10 mounting screws. 【Features】 ■ Prevents uneven loading due to the position and shape of the sample ■ Free joint design ■ Can adhere more closely to the sample ■ Two types available *For more details, please refer to the PDF document or feel free to contact us.

• others

The "GTW-2500N" is a vice for fixing samples on the vertical measurement stand. The main body is made of stainless steel and can accommodate measurements with magnetic properties. By changing the attachment direction of the jaws, it can be adapted for various measurements. It can attach up to six jaws, and by using custom jaws of different shapes, it can be utilized for a wider range of measurements. 【Features】 ■ Samples can be clamped in the center ■ The main body is made of stainless steel ■ Can accommodate measurements with magnetic properties ■ Jaws can be replaced *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The QFP lead hook SJ-QFP-01 is a fixture suitable for tensile strength testing of QFP leads soldered to a substrate. The chip shear fixtures SJ-TIP-01/02/03/04 are designed to measure the shear strength of chip components soldered to a substrate. You can choose from four tip widths: 0.25mm, 0.5mm, 2mm, and 4mm. 【Features】 ■ It enables strength measurement in compliance with various JIS/IEC standards. - JIS Z 3198-6: 2003 - JIS C 62137-1-1: 2010 (IEC 62137-1-1: 2007) - JIS C 60068-2-21: 2006 - JIS Z 3198-7: 2003 - JIS C 62137-1-2: 2010 (IEC 62137-1-2: 2007) * For the corresponding fixtures for each standard, please refer to P1 "Related Standards" in the SJ series catalog. ■ Replacement blades for the consumable hooks, QFP45-SB-1, are also available for purchase (for SJ-QFP-01 only). 【Usage Image】 Please refer to the "Related Videos" below.

• Work tools
• others

The Hinge Cap Opening Force Testing Jig HFC-50N is a device used to measure the force generated when opening a resin hinge cap. With a movable hook, it improves the workability of continuous measurements by eliminating the hassle of adjusting the sample position. The movable hook follows the rotation of the cap in the hinge mechanism, allowing for accurate measurement of the opening force. It is used in research and development of resin molding and in quality control processes for food and cosmetic containers. We also accept specification changes to suit your needs. For an image of its use, please refer to the measurement video below.

• others

IMADA's "Measurement Data Analysis Software" allows you to connect a digital force gauge to a PC via USB or RS232C cable, enabling real-time graphing of load values during measurement. This makes data management and analysis much easier. ■ What are the benefits of using the software? By graphing the data, it becomes possible to visually capture the trends in load. Statistical values are automatically calculated, and data can be recorded, making data management straightforward! 【Introduction to Various Software】 ● Force-Recorder (Standard/Light): Load-time (Torque-time) graphing software ● Force Recorder (Professional): Load-displacement (Torque-angle) graphing software ● Force Recorder (Plus): Multiple load-time (Torque-time) graphing software ● Force Logger Plus: Software for managing multiple force gauge data ● ZLINK4: Load-time (Torque-time) graphing software ● HCC-Easy: Graphing software for tension measurement

• Other analytical equipment
• Other measuring instruments

The MED-ACU-2N needle sharpness and strength testing device is designed to evaluate the sharpness and strength of needles. 【Features】 ■ Capable of measuring needles with a diameter of 0.1 to 1 mm ■ Allows for two types of tests: sharpness and strength Includes an aluminum foil fixing plate for the sharpness test and a metal base for the strength test. ■ Capable of measurements partially compliant with the following JIS/ISO standards: - JIS T9301: 2016 - ISO 17218: 2014 【Usage Image】 Please refer to the "Related Videos" below.

• Other measuring instruments
• Other analytical equipment

The "SH Series" is a manual measurement stand that allows for fine movement through a screw feed mechanism, providing stable thrust. Being horizontal, it makes handling samples easy. We offer models such as the "SH-1000," which features a cover that prevents sample fragments from entering the main body, and the "SH-3000," suitable for various material strength tests up to 3000N. 【Features】 ■ Hand-operated stand ■ Horizontal design for easy sample handling ■ Fine movement capability through a screw feed mechanism, providing stable thrust ■ Designed to be compatible with various Imada force gauge models *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• Other analytical equipment

The "FA Plus2 Series" is a desktop-type load cell amplifier designed in a box shape for easy integration into equipment. It features abundant external outputs for easy connection to equipment such as PLCs. The baud rate (communication speed) can be adjusted according to the specifications of the connected equipment or PLC, and data can be output via serial communication (RS-232C) at 100 data/second. With a sampling speed of 2000 times per second, it can reliably measure rapid changes in force. 【Features】 ■ Easy-to-use clear display ■ OK/NG judgment and high-speed judgment capabilities ■ Equipped with a variety of external output functions ■ Convenient shape for integration into equipment ■ Optionally changeable to industrial power supply 【Evolution to the Next Series】* From firmware version 5.00 onwards ■ Improved measurement stability due to further noise countermeasures. ■ Firmware updates and downloads of various additional functions are available on a dedicated site. *For more details, please refer to the PDF document or feel free to contact us.

• others

It is possible to acquire single and continuous data from multiple force gauges and display pass/fail judgment results quickly and clearly. Multiple force gauges can be registered by serial number and managed along with their names and calibration due dates. They can be easily connected through the included USB cable. 【Features】 - Clarification of multiple measurement device information management/measurement personnel - Setting of measurement conditions - Bulk/continuous data acquisition from a PC *For more details, please refer to the PDF materials or feel free to contact us. 【Providing optimal load measurement solutions with 70 years of know-how】 Imada is a pioneering manufacturer of load measurement, having produced Japan's first force gauge in 1947. Trust Imada for all your load measurement needs. Utilizing the expertise of a specialized manufacturer, we offer proposals tailored to customer needs. Custom manufacturing is also available.

• Scientific Calculation and Simulation Software
• Analysis and prediction system
• Other Software

The "HTGS" is a handheld torque gauge that combines high precision and high functionality. It allows for the acquisition of accurate values. Additionally, with interchangeable attachments (sold separately), it can handle various samples such as tightening and loosening screws and bolts, as well as rotary switches, all with one device. Furthermore, it minimizes the influence of lateral and bending forces with its double bearing support mechanism. 【Features】 ■ Data updates at 2000 times per second to track changes in torque values ■ Easy-to-read screen with a high-brightness organic EL display ■ Simple settings with Japanese menu display ■ Easy connection to a computer via USB ■ Easy saving of measurement values with included software ■ Simple graph creation with optional software (requires Force Recorder) The Next series from firmware version 5 and onwards features improved measurement stability due to low noise, as well as expandability with firmware updates on a dedicated site and the ability to download various service software. *For more details, please refer to the catalog or feel free to contact us.

• Other analytical equipment

This is a dedicated fixture (attachment) for measuring the force applied to a syringe. When combined with a force gauge and measurement stand, it allows for measurements in accordance with ISO standards. 【Features】 ■ Compatible with syringes (0.5 to 50 ml capacity) ■ Selection of insertion rings (4 types) according to the thickness of the syringe ■ Measurement partially compliant with ISO standards ISO 7886-1:2017 "Sterile hypodermic syringes for single use — Part 1: Syringes for manual use" partially compliant *For details, please check the basic information and PDF materials. 【You can try the product】 We have a laboratory where you can actually operate the product. Our technical staff will be present to provide reliable measurement solutions. 【Providing optimal load measurement solutions with 70 years of know-how】 Imada is a pioneering manufacturer of load measurement, having produced Japan's first force gauge in 1947. Trust Imada for all your load measurement needs.

• Other measuring instruments

The "MED-IS-20N" is a dedicated fixture (attachment) for measuring the tackiness of adhesive materials such as band-aids using a tack test. When combined with a force gauge and measurement stand, it enables measurements in accordance with standards. 【Features】 ■ Capable of measurements partially compliant with standards - Partially compliant with ASTM D2979:2016 "Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine" - Partially compliant with the Japanese Pharmacopoeia 6.12.(3.4.): Seventeenth Revision "Probe Tack Test Method" * A force gauge and measurement stand are required to perform measurements that are partially compliant with the standards. * For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

This is a dedicated fixture (attachment) for measuring the force required to pull out the needle base and needle tube of a syringe. It can be used in conjunction with a force gauge and measurement stand to perform measurements in accordance with standards. 【Features】 ■ Needles can accommodate a diameter of φ0.3 to 2.0mm and a length of 10mm or more. ■ Measurements can be partially compliant with JIS/ISO standards related to injection needles. Partially compliant with JIS T 3209:2011 "Sterilized Injection Needles" (ISO 7864:2016 compliant). * Other JIS/ISO standards can also be accommodated. Please check the basic information and PDF materials for details. 【You can try the product】 We have a laboratory where you can actually operate the product. Our technical staff will be present to provide reliable measurement solutions. 【Providing suitable load measurement solutions with 70 years of know-how】 Imada is a manufacturer of load measurement equipment that produced Japan's first force gauge in 1947. We offer a wide range of products tailored to various measurement needs. For load measurement, trust Imada.

• Other measuring instruments

Using a force gauge and measurement stand, we measure the tensile and breaking strength of cable ties (Insulock, tie wraps). 【Features】 ■ Two types of mandrels (for wrapping the cable ties) are included, allowing measurement according to the length of the band. ■ Suitable for measuring tensile strength up to 1000N. ■ Measurements can comply with certain UL and SAE standards. - Part of UL 62275:2010 "Cable Management Systems - Cable Ties for Electrical Installations" - Part of SAE AS23190 Rev.C "Wiring, Positioning, and Support Accessories" 【You can try the product】 We have a laboratory where you can actually operate the product. 【Providing optimal load measurement solutions with 70 years of know-how】 Imada is a pioneer manufacturer of load measurement, having produced Japan's first force gauge in 1947. We offer a wide range of products tailored to various measurement needs. Trust Imada for all your load measurement requirements.

• Other measuring instruments

The PPC-5000N measures the tensile and breaking strength of packaging PP bands (polypropylene bands) using a force gauge and measurement stand. It is also capable of measuring the tensile strength of PP band stoppers. 【Features】 ■ It can clamp PP bands (polypropylene bands) securely and without slipping. ■ The winding clamp reduces the risk of the PP band slipping. ■ Samples can be up to 40mm wide and 1mm thick. It can be used for tensile strength measurements up to 5000N. ■ Measurements can be partially compliant with JIS standards. Partially compliant with JIS Z 1527: 2002 "Polypropylene Bands." 【Video Available】 We are streaming a video on the measurement method that is partially compliant with JIS standards. Please take a look. 【Providing Optimal Load Measurement Solutions with 70 Years of Expertise】 Imada is a pioneering manufacturer of load measurement, having produced Japan's first force gauge in 1947. We offer a wide range of products tailored to various measurement needs. For all your load measurement requirements, trust Imada.

• Other measuring instruments

High-speed sampling provides high reproducibility, and the accompanying software allows for the transfer of torque values, dates and times, and OK/NG judgment results to a PC. By using optional software (sold separately), real-time graph creation is possible on a computer. 【Common Features of DTXS/DTXA Series】 ■ High precision of ±0.5% F.S. ±1 digit and high-speed sampling at 2000Hz to obtain accurate values. ■ Wide compatibility with various tables and attachments for a broad range of samples. ■ Partial compliance with JIS S 0022 (2018) "Packaging - Accessible Design - Unpackability." * Additional equipment such as measurement stands is required. Please contact us for details. 【Unique Features of DTXA Series】 ■ Continuous data output without a PC is possible by connecting a USB memory. ■ Acquisition of 1st peak/2nd peak values. ■ Torque-angle measurement is possible using the high-function type electric torque stand ACMTS series. 【Evolution to the Next Series】 *Firmware Ver. 5.00 and later ■ Measurement stability has improved due to further noise countermeasures. ■ Firmware updates and downloads of various additional functions are available on a dedicated site.

• Other measuring instruments

The "IPTS-20N/50N" is a peel testing machine that accommodates various samples such as labels, adhesive tapes, food laminates, and band-aids. With high-speed sampling at 2000Hz and high-speed data communication, it can track rapid changes in load as well as minute variations, and graph the results using the accompanying software. 【Features of IPTS-20N/50N】 - Capable of high-speed peel testing at 1500mm/min - Comes with software that can accurately graph data at a communication speed of 2000 data/second - Testing compliant with certain standards such as JIS/ISO is possible (refer to the application/results examples section) - Can measure various samples with different thicknesses and widths 【Evolution to the Next Series】 *From firmware version 5.00 onwards ■ Measurement stability has improved due to further noise countermeasures. ■ Firmware updates and downloads for various additional features are available on a dedicated site. *Our company website features various load measurement videos using Imada products. ▼ Videos of various tensile tests are also available at the URL below, so please take a look.

• Other measuring instruments

The IPTS-5N is an ideal peel testing machine for measuring the peel strength of embossed carrier tape based on JIS standards. 【Compliance with Standards】 ■ Measurements can be made in partial compliance with the following JIS/IEC standards: - JIS C0806-3 (2014), IEC 60286-3 (2013) 【Features】 ■ With a communication speed of 2000 data/second, even minute changes in force can be visualized in a graph. ■ Measurement speed can be easily adjusted with a dial (6 levels, maximum 1500mm/min). ■ One-touch operation allows for automatic completion of graph recording and data saving from the start of measurement, simplifying the entire process. ■ The included software can display statistical values such as minimum/maximum values and load values (N/[W]mm) for a specified tape width [W]. 【Evolution to the Next Series】 *From firmware version 5.00 onwards ■ Measurement stability has improved due to further noise countermeasures. ■ Firmware updates and downloads of various additional features are available on a dedicated site. *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

It is possible to check the operation of fire doors with a simple operation by attaching a force gauge and placing it against the door. The operation check of fire doors, as specified by the Building Standards Act, can be measured with high reproducibility. 【Features】 - A handle for measuring the closing force of fire doors using an attached force gauge - Enables operation checks of fire doors as stipulated by the Building Standards Act - Provides reproducibility and safety by supporting it against the door - Measurement can be done without damaging the door using the included urethane pad 【Imada provides load measurement solutions tailored to your needs with 70 years of know-how】 Imada is the manufacturer that produced Japan's first force gauge in 1947. We offer a wide range of solutions, including tensile tests, compression tests, peel tests, friction tests, pressure tests, and puncture tests. Trust us with your load/torque measurement needs. Utilizing our expertise as a specialized manufacturer, we can propose solutions tailored to your requirements. Custom manufacturing is also available. *For more details, please download the PDF or feel free to contact us. *You can also purchase products from Amazon (link below).

• Other measuring instruments

The "DSV/DST series" is a compact and user-friendly digital force gauge (load measuring device) suitable for handheld measurements. Despite being an economical model, it comes with software for data acquisition and is equipped with many convenient features for measurement and data management, such as pass/fail judgment functions and overload warning functions. The "DSV series" includes a posture change warning function that alerts users to abnormal posture changes in addition to the basic performance of the "DST series," helping to reduce variations in measurement angles and improve measurement reproducibility. Additionally, the "DSV series" features a function that automatically updates and saves peak values during continuous measurements. This enhances work efficiency by eliminating the need to reset or save values with each measurement. 【Features】 ■ Up to 30 hours of battery operation ■ Rechargeable via PC or mobile battery ■ Easy data management with the included software ■ Wide compatibility with maximum loads up to 1000N *For more details, please refer to the specifications. Feel free to contact us with any inquiries.

• Other measuring instruments

By connecting the force gauge to a computer and opening the software, you can easily create graphs. You can set the load values and recording time on the software, allowing for automatic start and stop of recording. The auto-save feature eliminates the hassle of data loss and settings. 【Features】 - Easily create graphs of load measurement results (load-time graph). - Set load values and recording time, with automatic start and stop of recording. - The auto-save feature prevents data loss in graphs. - You can operate settings such as upper and lower limits of the force gauge on the software. - Data management is possible by converting to CSV files for use in Word, Excel, and PDF. *For more details, please refer to the PDF document or feel free to contact us. 【Providing optimal load measurement solutions with 70 years of know-how】 Imada is a pioneering manufacturer of load measurement, having produced Japan's first force gauge in 1947. Trust Imada for all your load measurement needs. Utilizing our expertise as a specialized manufacturer, we offer proposals tailored to customer needs. Custom production is also available.

• Scientific Calculation and Simulation Software