イマダ List of Products and Services

We offer a variety of products to achieve load measurement. Even if the product is not listed in the catalog, we can accommodate custom orders, so please be sure to check with us. 【Featured Products】 ■ Digital Force Gauge ■ Mechanical Force Gauge ■ Electric Measurement Stand ■ Manual Measurement Stand ■ Compression and Tension Option Attachments ■ Load-Displacement Measurement Unit ■ Robot Load Measuring Device ■ Torque Gauge ■ Tension Meter *If you would like a comprehensive catalog, you can request the materials via the link.

• Measurement and Inspection

The MX series is an electric measurement stand designed to be used in combination with Imada's force gauges (load measuring devices). It is a product that focuses on essential functions to keep costs down among Imada's electric measurement stands, boasting high cost performance. **Features of the MX Series** - It can standardize the speed and direction during measurement, achieving highly reproducible load measurements. - It is capable of handling various measurements such as tensile tests, compression tests, and peel tests. - By connecting to a force gauge with a communication cable, it enables operation control based on load values and prevents overload. ■ For Imada force gauges, please refer to the related products at the bottom of the page. ■ We also offer software that is convenient for graph creation and data analysis. For more details, please visit our website. *On our website, we have published various load measurement videos using Imada products. ▼ Various measurement case videos are also available at the URL below, so please take a look.*

• Other analytical equipment

The LH-500N is a lever-type horizontal manual stand for tensile strength testing of crimp terminals. It can measure the crimp strength of terminals such as those used in wire harnesses. It comes with a fixture that allows for easy one-touch sample setup. When used in conjunction with a force gauge, it enables simple tensile strength testing as a dedicated testing machine. *Note: The force gauge is sold separately. 【Features】 - Crimp terminal strength measurement can be easily performed by simply pulling the lever. - The wire clamp section employs a wedge mechanism, allowing for a secure clamp with one touch. - A wide terminal clamp (maximum opening width of 6mm) that accommodates large crimp terminals.

• Other analytical equipment

The "FC Series" is a film chuck that allows you to select the material and clamping method of the chuck part according to the sample. By using it in conjunction with specific force gauges, measurement stands, and connection cables, it is possible to conduct a wide range of tests, including those partially compliant with JIS Z1711 (1994) "Polyethylene Film Bag '8.4 Heat Seal Strength Test.'" 【Features】 - A tensile chuck suitable for holding thin samples such as films. - In addition to films, it can be used for measuring thin samples like adhesive tapes and magnetic cards. - A wide range of models available. - Lightweight model "FC-21" is suitable for mounting on low-load gauges due to its lightweight design. - Standard models "FC-20/40" can handle up to 500N. - Single urethane type "FC-21U/41U" prevents slipping and tearing of ultra-thin samples. - Lever type "FC-21UQ" allows for one-touch operation with a single-side urethane type. - Custom manufacturing is possible according to sample width, thickness, and usage. *For more details, please refer to the PDF or feel free to contact us. *FC-20 and FC-21UQ are also available for purchase from Amazon (link below).

• Other analytical equipment

This is a popular mechanical force gauge that covers the low to medium load range from 10N to 500N, offering stable accuracy at a low price. *For some ranges, you can also purchase the product from Amazon (link below).

• Other measuring instruments

The RFS150E sensor is an industrial product that can be installed on various devices and workspaces. This product can be used for direct measurement of tension commonly performed on wires, optical fibers, cables, ropes, narrow tapes, etc., during winding and feeding. It is suitable for use in production, research, and quality control fields. The concept of this sensor, which applies the latest technology, allows for tension measurement on factory production lines while being integrated into reversing pulleys on the line.

• Other analytical equipment
• Other measuring instruments

The GC series is an attachment for compression and tensile testing that is used in combination with Imada's force gauges (load measuring devices). The Imada force gauges, when combined with the attachment, enable various load measurements. 【Features of the GC Series】 - It is ideal for gripping round rod-shaped samples such as wire. - It has a strong clamping force, and the mechanism prevents slipping by embedding into the sample. - It can be used for load measurements in both compression and tensile tests. ■ For Imada force gauges, please refer to the related products at the bottom of the page. ■ We also offer measurement stands to improve measurement stability and software that is convenient for graph creation and data analysis. For more details, please visit our website. *Various load measurement videos using Imada products are available on our website. ▼ Videos of various tensile tests are also available at the URL below, so please take a look.

• Other analytical equipment

GP-15 is suitable for soft and stretchable test specimens such as resin tubes, thick rubber, silicone, and urethane, which become thinner when stretched. GP-30 is an attachment fixed to the stand that can be combined with the rotary crimp terminal hook attachment FW-12 to measure the crimping strength of electrical wires.

• Other analytical equipment
• Other measuring instruments

You can hook various crimp terminals for wires of different sizes and measure crimping force strength. Since it is rotary, wires of various sizes can be set without removing the jig. By combining it with the GP-30, you can achieve higher work efficiency in measurements.

• Other analytical equipment

DX2 is the most widely used standard type of mechanical tension meter in the world. With various roller shapes and options, it can accommodate a wide range of tension measurements.

• Other analytical equipment
• Other measuring instruments

The 90° peel test fixture P90-200N series is a device used to peel various samples such as adhesive tapes/sheets and copper foil at a 90° angle to measure adhesive strength. 【Features】 ■ With three different models available, you can choose a type suitable for samples of varying thickness, from thin film tapes to thicker substrates. ■ Measurements can be made in accordance with various standards listed below: - JIS C 5016:1994 (Corresponding international standards IEC 249-1:1982, IEC 326-2:1990) - JIS C 6471:1995 (Corresponding international standard IEC 249-1:1982) - JIS H 8630:2006 (Corresponding international standard ISO 4525:2003) - JIS Z 0237:2022 (Corresponding international standard ISO 29862:2007) - Japanese Pharmacopoeia: Eighteenth Revision - ASTM D6862-11:2016 - ASTM D3330:2010 * For models corresponding to each standard, please refer to the P90 series catalog. 【Usage Image】 Please refer to the "Related Videos" below.

• Other measuring instruments

The MX2 series is a measurement stand that can be used as a simple tensile/compression testing machine by combining force gauges and fixtures. It provides more reproducible results than measuring with a force gauge alone. At Imada, we offer over 50 types of compatible force gauges and more than 100 types of fixtures, allowing us to propose measurement methods suitable for our customers. 【Features】 ■ Uniform testing speed and direction for highly reproducible measurements - Digital setting and display of testing speed - Straight application of load → Reduces variability caused by the tester ■ Diverse measurements including durability and repetitive testing - Equipped with timer and counter functions for easy durability and repetitive testing - When connecting the ZTS/ZTA force gauge to the MX2 with the dedicated cable CB-518, the following functions are also available: - Overload prevention - Control of measurement actions based on load values - Automatic start and recording of graph plotting ■ Easy operation - Setting testing speed and number of tests is simple with just one dial while looking at the monitor ■ Peel testing / friction coefficient measurement - In addition to tensile and compression tests, it can also accommodate peel testing and friction coefficient measurement.

• Other measuring instruments

The MS series is a compact and lightweight measurement stand designed to be used in combination with Imada's force gauge (load measuring device). It is the smallest and lightest among Imada's measurement stands, making it ideal for portability and integration into equipment. 【Features of the MS Series】 - It allows for fine movement through a screw feed mechanism, providing stable thrust. - Weighing approximately 1.2 kg, it is easy to carry and does not require a specific workspace. - The MSL-50N comes with a displacement gauge, allowing simultaneous measurement of load values and displacement. ■ For Imada's force gauges, please refer to the related products at the bottom of the page. ■ We also offer software that is convenient for graph creation and data analysis. For more details, please visit our website. *Various load measurement videos using Imada products are available on our website. ▼ You can also find various measurement case videos at the URL below, so please take a look.

• Other analytical equipment

It is suitable for clamping thin-shaped samples such as copper foil and for measurements in narrow spaces. <Features> ■ Strong clamping is possible due to the serrated design. ■ Available in two sizes: 3mm (SC-3) and 8mm (SC-8).

• Other analytical equipment
• Other measuring instruments

This is a tensile test attachment that can wrap and secure wire materials such as thread and wire.

• Other analytical equipment
• Other measuring instruments

A tensile testing jig that is ideal for gripping samples that are prone to deformation and easy to pull out, such as wires and optical fibers. 【Features】 - Easy setup with one-touch sample fixation. - The wedging mechanism automatically increases clamping force when pulled, making measurements easy and accurate. *Not suitable for hard samples like those that have been hardened or samples with slippery surfaces. Please contact us for details on compatible samples. *KC-100 is also available for purchase on Amazon (link below).

• Other analytical equipment
• Other measuring instruments

The "GC Series" is a flat chuck for tensile strength measurement that can be used for various purposes, from thin to thick materials. It can be attached to our force gauge and used as a fixture for tensile strength testing of various materials. This time, we have added a new lineup of the 【GCF-1200】 that can be used for multiple purposes by exchanging the claw part. With a maximum opening width of 30 mm, it can be utilized for a wide range of applications, and you can choose from a total of four types according to the load and opening width. 【Features】 ■ Wide opening width allows for a variety of applications ■ Choose from four types based on load and opening width ■ Attachments for tensile measurement that can secure materials from thin to thick * For more details, please refer to the PDF document or feel free to contact us. * The GCF-1200 is also available for purchase on Amazon (link below).

• Other measuring instruments
• Other analytical equipment

The GR series is a tensile testing attachment designed to be used in combination with Imada's force gauge (load measuring device). The Imada force gauge, when combined with the attachment, enables various load measurements. 【Features of the GR Series】 - It is ideal for gripping thin samples such as paper and film. - The lever mechanism allows for easy sample setup, achieving high measurement efficiency. - The cam mechanism automatically applies clamping force when tensile load is applied, making it difficult for the sample to slip out. ■ For Imada force gauges, please refer to the related products at the bottom of the page. ■ We also offer measurement stands that improve measurement stability and software that is convenient for graph creation and data analysis. For more details, please visit our website. * We have published various load measurement videos using Imada products on our website. ▼ Videos of various tensile tests are also available at the URL below, so please take a look.

• Other analytical equipment

The GC-60/100 is a tensile testing attachment designed to be used in combination with Imada's force gauge (load measuring device). The Imada force gauge, when paired with the attachment, enables various load measurements. 【Features of GC-60/100】 - It is ideal for gripping samples that have elongation, such as rubber and films. - It automatically exerts a strong clamping force when pulled, ensuring a firm grip on samples that may deform and thin during testing. - By wrapping and clamping, it reduces slipping and tearing of the sample. ■ For information on Imada's force gauges, please refer to the related products at the bottom of the page. ■ We also offer measurement stands that enhance measurement stability and software that is convenient for graph creation and data analysis. For more details, please visit our website. * We have published various load measurement videos using Imada products on our website. ▼ You can also find videos of various tensile tests at the URL below, so please take a look.

• Other analytical equipment

The "I Series" is a driver torque meter that measures the torque (turning force) of electric drivers and torque drivers. Routine inspections can be easily performed with simple tasks. Data output (serial) is possible, allowing for effortless management. 【Features】 ■ Measures the torque (turning force) of electric drivers and torque drivers ■ Routine inspections can be easily performed with simple tasks ■ Data output (serial) is possible, allowing for effortless management *For more details, please refer to the PDF materials or feel free to contact us.

• Other analytical equipment
• Other measuring instruments

It can detect both tensile and compressive loads.

• Other analytical equipment
• Other measuring instruments

The "PS Series" is an analog load measuring device (push-pull gauge) designed for easy and accurate measurement of tensile and compressive forces. 【Features】 ■ High precision within ±0.1% F.S. ■ Capable of measuring both tensile and compressive forces ■ Equipped with a stop pin mechanism for peak value measurement (ON/OFF available) ■ Zero point adjustment mechanism for compensating the weight of attachments, etc. ■ Easy-to-read scale design ■ Comes with various attachments and a storage case *For more details, please refer to the PDF document or feel free to contact us.

• Other analytical equipment

The ET series is a tension meter ideal for fiber measurement in narrow spaces. <Features> ■ It can measure maximum, minimum, and average values. ■ The damping function allows for stable readings even when there are significant changes in tension. ■ Hold: Measurement data can be saved. ■ The guide roller is fixed to a longer shaft, enabling measurement in narrow spaces. ■ Excellent operability is achieved through lever operation at hand. ■ The digital display can be inverted, allowing use from either direction.

• Other analytical equipment
• Other measuring instruments

The LMT-1000N load cell is a compression load cell that can be used over a wide temperature range. - Usable in a wide temperature range from minus 40 degrees to plus 150 degrees. - With a small coin size of φ14xH4.3mm, it can be inserted into narrow gaps. The indicator (amplifier) has a wealth of input and output functions. - An indicator is required to display the load value. Imada offers three types of indicators*: 1. Desktop type: FA Plus2 2. Portable type (standard): ZTS separate 3. Portable type (advanced): ZTA separate All indicators can provide the following input and output: - USB/RS232C/analog, etc. - Pass/fail judgment, peak value, overload, etc. - By using dedicated software*, graph plotting is also possible. *For details, please refer to the information below. With 70 years of know-how, we provide optimal load measurement solutions. Imada is a pioneering manufacturer of load measurement, having produced Japan's first force gauge in 1947.

• Other analytical equipment

The MH-1000N is a horizontal electric measurement stand that covers a range from low loads up to 1000N. (Features) ● Being horizontal makes it easy to handle samples. ● Electric measurement allows for consistent speed conditions. ● A cover that prevents sample fragments from easily entering the main body. ● The screw feed mechanism enables fine movement and provides stable thrust. ● It is optimally designed for various models of Imada force gauges. ● It can be connected to a force gauge for overload stop and load control. ● An optional speed/length meter can measure displacement and speed.

• Other analytical equipment
• Other measuring instruments

The COF series friction coefficient measurement fixture is designed to measure the friction coefficients of materials such as paper and film. 【Features】 ■ Available in both vertical and horizontal stand options, allowing customers to choose based on their measurement space. ■ Measurements can be made in partial compliance with JIS/ISO standards. ・JIS P 8147: 2010 ・JIS K7125: 1999 (ISO 8295:1995) *Please refer to page P1 "Related Standards" in the COF series catalog for the corresponding fixtures for each standard. ■ Custom products are available that enable the measurement of friction coefficients for plastic films and sheets in partial compliance with ASTM D 1894-14. ■ By using separately sold graphing software, static friction coefficients and average dynamic friction coefficients can be automatically calculated. 【Usage Image】 Please refer to the "Related Videos" below.

• Other measuring instruments