エクセリ List of Products and Services

The D303 (D-303) is a wideband receiving antenna manufactured by Daiichi Denpa Kogyo (Diamond) for the frequency range of 0.5 to 200 MHz. It is a fixed outdoor antenna for receivers. It comes with a 10m RG58U coaxial cable and an MP connector. The coil can be concentrated in one direction. *For more details, please feel free to contact us.*

• others

The D777 (D-777) is a 120/300MHz band airband receiving antenna manufactured by Daiwa. It is an outdoor fixed antenna designed for receiving signals in the 120MHz and 300MHz airband. It complies with the European environmental regulation RoHS directive. *For more details, please feel free to contact us.*

• others

The TCP-D261E and TCP-D261BTE are UHF band digital simple radio licensed stations 3B/3C/3D manufactured by JVC Kenwood. They are new wave compatible 85ch products starting from May 10, 2024. The TCP-D261E / TCP-D261BTE are new wave compatible products. The differences from the TCP-D261 / TCP-D261BT are as follows: - The existing digital simple radio licensed station (3B) with 65ch has been increased by 30ch to accommodate the new wave digital simple radio registered station (3C/3D), resulting in a total of 85ch. *Relay (3D) 20ch (10 pairs) is included. *There are no changes to functions or performance other than the new wave. The audio delay during transmission has been improved by 30% compared to the previous model, making it easier to use for events, filming, concerts, and more. A wide range of dedicated accessories is also available. You can try it for free before purchasing, so please feel free to contact us. 【Features】 ■ High output yet compact and lightweight ■ Antibacterial and antiviral processing ■ High sound quality unique to an audio manufacturer ■ Reliable dustproof and waterproof specifications *For more details, please refer to the PDF document or feel free to contact us.

• others

● The ASC100BK (ASC-100-BK) is a Bluetooth bone conduction headset made by Shokz. ● It is designed for the remote assistance wearable camera U-BOX AT. ● When using it with the U-BOX AT main unit and either the helmet visor-mounted camera ST#7CAM-03U or ST#7CAM-04U, a Bluetooth bone conduction headset is required for audio transmission and reception. ● It connects via Bluetooth to the "Windows version" of the U-BOX AT main unit and shared terminals of the LW model. *For more details, please contact us.*

• others

● The TCM-D244E-CT is a UHF band digital simple radio licensed station manufactured by JVC Kenwood. ● It is part of the digital simple radio relay system NEXEDGE CR series. ● It supports 12V and 24V vehicles. ● It is equipped with a full-dot LCD display. ● It supports four-character Japanese (kanji) display, allowing for the representation of ID numbers and the names of transmitting parties. ● It features a secret communication function using 32,767 types of secret keys. ● It supports individual and group calling. ● In digital mode, it achieves clear audio by cutting out white noise. ● It is equipped with an emergency function that is useful in emergencies. A wide range of dedicated accessories is also available. You can try out a demo unit for free in advance, so please feel free to ask. 【Features】 ■ High output of 5W ■ Can be operated as a base station ■ Advanced secret communication function ■ Supports digital/analog communication ■ IP54 dustproof performance * For more details, please refer to the PDF materials or feel free to contact us.

• Other Software
• others

● The NX-330EXE CT is a digital general-purpose wireless device manufactured by JVC Kenwood. ● It is part of the digital simple wireless relay system NEXEDGE CR series. ● This explosion-proof radio has passed the explosion-proof structure electrical machinery certification by the Japan Industrial Safety Association. ● The intrinsic safety explosion-proof structure complies with "Ex ib llC T4 Gb (gas) / Ex ib lllC T110℃ Db (dust)." ● The radio's casing is designed to be very robust, with an IP65/67 dust and water resistance rating. ● It supports location management via GPS receivers, allowing office managers to track the real-time location of radio holders. We also offer a wide range of dedicated accessories. You can request a free demo unit for a trial before purchase, so please feel free to ask. 【Features】 ■ GPS location management support ■ Explosion-proof radio ■ Emergency function equipped ■ Robust casing with IP65/67 waterproof and dustproof performance *For more details, please feel free to contact us.

• others
• Call device

The D150 (D-150) is a wideband super discone antenna manufactured by Daiichi Radio Industry (Diamond). * A discone antenna is a plate-like antenna composed of a disc and a cone. It has a very wide usable frequency range and is designed to be lightweight and resistant to wind by using the disc and cone as elements. * Its compact and lightweight design allows for installation on balconies of apartment complexes and condominiums. * It comes with approximately 10 meters of RG58A/U coaxial cable and an MP connector. * It uses stainless steel elements that are resistant to rust. * For more details, please feel free to contact our company.

• others

The D130 (D-130) is a super discone antenna (for fixed stations) manufactured by Diamond. * A discone antenna is a plate-type antenna composed of a disc and a cone. It has a very wide usable frequency range and is lightweight and wind-resistant due to the disc and cone being used as elements. * Its compact and lightweight design allows for installation on balconies of apartment complexes and condominiums. * It uses stainless steel elements that are resistant to rust. * It is a wideband receiving antenna designed for frequencies from 25 to 1300 MHz. It can also transmit on amateur bands of 50/144/430/1200 MHz and for personal radio use. * It comes with approximately 15 meters of RG58A/U coaxial cable and an MP connector. * It can receive from 25 to 1300 MHz and transmit on 50/144/430/904/1200 MHz bands (DIGITAL compatible). * It is an omnidirectional antenna. * An omnidirectional antenna is one that can transmit and receive radio waves from all directions. * It complies with the European environmental regulation RoHS directive. * For more details, please feel free to contact us.

• others

●USB-3TCH14S2 (USB3TCH14S2) is a U-BOX AT USB Type-C docking hub manufactured by Sanwa Supply. ●It is a USB Type-C docking hub equipped with HDMI, LAN port, and card reader. ●If you purchase the TANIZAWA remote assistance wearable camera U-BOX AT in the "Windows version" for web conferencing, you will need the USB-3TCH14S2 to connect the display (including HDMI cable), mouse, and keyboard to the U-BOX AT during setup. ●This is for "Windows version" setup. ●Compatible wireless devices are ST#7704 and ST#7704 (DE200). *For more details, please feel free to contact us.

• others

The BONX intro knot 3.5M is an open-ear, ear-hook type headphone made by BONX. It is an earphone microphone for the business-oriented simultaneous communication IP radio app, BONX WORK. You can connect it via a wired connection to a smartphone with the BONX app installed for hands-free simultaneous communication. There are versions for the right and left ears. - Right ear: Manufacturer model number BN1-MWEBKR1 - Left ear: Manufacturer model number BN1-MWEBKL1 Since it is an open-air ear-hook type, you can keep your ears open while using it, allowing for natural face-to-face conversations even while wearing the earphones. It is a wired connection type with a 3.5mm jack/4-pole microphone. Being a wired type, it does not require charging. It is an entry-level model. The microphone is omnidirectional. The personalized sound zone technology (PSZ technology) developed by NTT minimizes sound leakage to the surroundings.

• others

The BX4-AMCS1 (BX4AMCS1) is a centralized charging station made by BONX. It can charge 8 BONX BOOST Full Packs simultaneously. *It cannot be used with the BONX BOOST Light Pack, which does not come with a charging case. It makes managing multiple units easy.

• others

● OPK-5 (OPK5) is a connection cable set made by ICOM for the second exciter. ● This is the connection cable for the second exciter when using two exciters with the IC-PW2. ● This product includes a coaxial cable (approximately 3m), an ACC cable (approximately 3m), and a mini plug cable (approximately 3m). ● It is an accessory for amateur radio equipment.

• others

●SBH-19 (SBH19) is a charging cradle manufactured by YAESU (Yaesu Musen/Standard Horizon). ●It is a charger for digital simple radios made by YAESU and Motorola. ●When combined with the separately sold AC adapter SAD-30A, it can charge YAESU lithium-ion battery packs from a household power supply of AC100V in 2 to 3 hours. ●The combination of SBH-19 and SAD-30A becomes the rapid charger set SAD-1915A. ●The charging status can be easily understood by the color of the following LED lamps: - Green: Charging complete - Red: Rapid charging in progress ●It can be purchased as a replacement part.

• others

BX4-ABCC2 (BX4ABCC2) is a charging cradle Type C cable set made by BONX. It can charge the BONX BOOST. It is a set of a charging cradle and a Type C cable.

• others

The IC-DU45 (ICDU45) is a digital simple radio license station 3B/3C/3D manufactured by Icom. It is a new model compatible with 75 channels plus 10 relay channels, increasing the total by up to 20 channels. It supports the frequency expansion announced by the Ministry of Internal Affairs and Communications in 2023 for digital simple radios (DCR). It features a sub-channel PTT function that allows for one-touch selection of assigned communication partners using the main and two sub-channel PTTs. With a speaker output of 1500mW, it ensures clear audio even in noisy environments. It is Bluetooth compatible, allowing the use of Bluetooth earphone microphones, speaker microphones, and headsets. It includes a VOX function that automatically transmits audio in response to sound, enabling hands-free operation. Battery life is approximately 16.5 hours when using a high-capacity lithium-ion battery pack (2280mAh) BP-280, and about 23 minutes when using a battery case with five AA alkaline batteries (BP-312). This is based on power save mode being ON, output at 5W, and a transmission-reception-waiting ratio of 5:5:90.

• others

The PNC460 is a SIM-free rugged business smart device manufactured by Hytera. It is an LTE smart device with Android™ 12 OS that can be used as an IP radio (Hytalk) and a mobile phone. Since it is SIM-free, the SIM card is sold separately, and you can also use your own. It features high ruggedness and durability, complying with MIL-STD-810 standards for shock resistance and IP68 dust and water resistance. It is equipped with a large-capacity battery (BL4501 / lithium polymer 4,500mAh) that allows for long hours of continuous use, and the battery is replaceable. It can be used as both a mobile phone and an IP radio (Hytalk IP radio). It supports dual Nano SIMs, making it suitable for BCP measures. It is equipped with a powerful camera, featuring a high-quality 50-megapixel rear camera with HDR technology and anti-shake algorithms. It has a microSD card slot that allows for storage expansion of up to 128GB, ensuring that large amounts of business data can be safely stored. *For more details, please feel free to contact us.

• others

The D3000N (D-3000N) is a super discone antenna (for fixed stations) manufactured by Daiwa (Diamond). * A discone antenna is a plate-like antenna composed of a disc and a cone. It has a very wide usable frequency range and is lightweight and resistant to wind due to the disc and cone being used as elements. * It can receive frequencies from 25 to 3000 MHz and transmit in the 50/144/430/904/1200 MHz bands (DIGITAL compatible) for amateur bands and personal radio use. It is an ultra-wideband design antenna covering from 25 to 3000 MHz. * Please use it in combination with separately sold coaxial cables. The suitable coaxial cable is 10D-2V or lower. * Its lightweight and compact design allows for installation on balconies of apartments and condominiums. * It uses stainless steel elements that are resistant to rust. * It is a completely omnidirectional antenna. * An omnidirectional antenna is one that can transmit and receive radio waves from all directions. * It complies with the European environmental regulation RoHS directive. * For more details, please feel free to contact us.

• others

● The DJ-P102R (DJP102R) is a repeater for specific low-power radio communication manufactured by Alinco. ● It extends the communication range of specific low-power transceivers compatible with Alinco's repeater devices. ● Up to four units can be wirelessly connected, enabling longer-distance communication than standard repeaters. ● It can be mounted on a pole for use. ● With an IP67 equivalent dust and water resistance specification, it can be installed outdoors. ● It is a compact and high-performance repeater for specific low-power radio. ● It has a built-in high-performance noise canceller, significantly reducing noise regardless of the model of Alinco-compatible transceiver used. ● Settings are made using a remote-controlled specific low-power transceiver, with no switch operation on the main unit. *For more details, please refer to the PDF document or feel free to contact us.*

• others

● The CX210N (CX-210N) is a coaxial switch (1 circuit, 2 contacts) manufactured by Daiwa. ● It is a manual coaxial switch with 1 circuit and 2 contacts used for switching high-frequency signals. ● It is used when connecting multiple antennas to a radio or for switching between multiple radios. ● The input/output connector is N-J. ● It complies with the European environmental regulation RoHS directive. *For more details, please feel free to contact us.*

• others

The CX310N (CX-310N) is a coaxial switch (1 circuit, 3 contacts) manufactured by Daiwa (Diamond). It is a manual coaxial switch with 1 circuit and 3 contacts used for switching high-frequency signals. It is used when connecting multiple antennas to a radio or for switching between multiple radios. It has a wide frequency range, making it suitable for commercial radio and other applications. It offers good isolation, with no coupling or induction between terminals. It has a high power tolerance and does not generate heat. The center conductor of the connector is gold-plated. The body is made of robust zinc die-cast. The switching section uses large contact pieces to prevent contact deterioration. The input/output connector is N-J. It complies with the European environmental regulation RoHS directive. *For more details, please feel free to contact us.*

• others

●SAS-02A (SAS02A) is a DC stabilized power supply device manufactured by Yaesu Musen (Standard Horizon). ●It is a DC stabilized power supply device that includes a high-quality, high-volume speaker capable of operating mobile radios as a base station. ●It can be used with mobile business radios made by Yaesu Musen (Standard Horizon). - Digital general business radios SRM620U1, SRM620U2, SRM620V - Digital simple radio licensed stations SRM420U, SRM420U/R, SRM420V - Digital simple radio registered stations SRM320, FTM320R - IP radios SRNX100, SRNX100x *The previous model SAS-01A is not compatible with the SRNX100 and SRNX100x for connection operation. *There are also other compatible models not listed above. ●It operates mobile radios using a household power supply of AC100V. ●It includes a high-quality, high-volume speaker capable of operating as a base station.

• others

● The CX310A (CX-310A) is a coaxial switch (1 circuit, 3 contacts) manufactured by Daiwa (Diamond). ● It is a manual coaxial switch with 1 circuit and 3 contacts used for switching high-frequency signals. ● It is used when connecting multiple antennas to a radio or for switching between multiple radios. ● It has good isolation with no coupling or induction between terminals. ● It has a high power tolerance and does not generate heat. ● The center conductor of the connector is gold-plated. ● The body is made of robust zinc die-cast. ● The input/output connector (plug) is M-J. ● It complies with the European environmental regulation RoHS directive. *For more details, please feel free to contact us.

• others

● The CX210A (CX-210A) is a coaxial switch (1 circuit, 2 contacts) manufactured by Daiwa. ● It is a manual coaxial switch with 1 circuit and 2 contacts used for switching high-frequency signals. ● It is used when connecting multiple antennas to a radio or for switching between multiple radios. ● The input/output connector is M-J. ● It complies with the European environmental regulation RoHS directive. *For more details, please feel free to contact us.*

• others

●ST#7HEDCAM-01U (ST7HEDCAM01U) is a camera-equipped headset manufactured by Tanizawa. ●It is a camera-equipped headset for the remote support wearable camera U-BOX AT. ●By connecting the U-BOX AT main unit ST#7704 with the camera-equipped headset ST#7HEDCAM-01U, it enables video streaming, recording, and audio transmission and reception. ●It has an IPX4 rating for everyday water resistance. ●The configuration examples are as follows: 1. Dedicated cloud model: Recommended for sites with strict communication environments, but currently, video streaming for web conferences is mainstream due to the still image frame-by-frame video. - U-BOX AT ST#7704 - Camera-equipped headset ST#7HEDCAM-01U - AC adapter (charger) - Mobile router 2. LAN model: Continuous still image streaming, but with a higher frame rate than the dedicated cloud, and it does not connect to the internet, ensuring high security. - U-BOX AT ST#7704 - Camera-equipped headset ST#7HEDCAM-01U - AC adapter (charger) *For more details, please contact our company.

• others

The IP510H (IP-510H) is an IP transceiver (LTE + WLAN compatible) manufactured by Icom. It is the successor to the well-known "IP500H series" of IP radios (LTE radios). In addition to the basic functions of the previous models IP500H, IP501H, and IP502H, it includes the following new features: - WLAN compatible standards: IEEE802.11 b/g/a/n/ac - Compatible with WPA3, allowing connection to networks with high-level security environments - Supports Bluetooth PTT (only SPP) - Allows battery replacement without turning off the power while charging via USB Type-C In addition to the functions of the IP502H, it supports wireless LAN (WLAN). With WPA3 compatibility, it can connect to networks with high-level security environments, and can communicate via Wi-Fi (Internet) when outside the LTE coverage area. It supports wireless LAN (WLAN) in addition to the functions of the IP502H. *For more details, please feel free to contact us.

• others

The UCAM-CW50ABWH (UCAMCW50ABWH) is a close-up camera made by Elecom. It is used in conjunction with the U-BOX AT main unit ST#7704. It has an IP54 rating for dust and everyday water resistance. Weighing approximately 40g, it is lightweight, making it less noticeable when attached to a helmet or held in hand. It can be mounted on a helmet using the included helmet mount. The configuration examples are as follows: 1. Dedicated cloud model: Recommended for sites with strict communication environments, but due to the still image frame-by-frame video, video streaming for web conferences is currently mainstream. - U-BOX AT main unit ST#7704 - Close-up camera UCAM-CW50ABWH - AC adapter (charger) - Mobile router 2. LAN model: Continuous still image streaming, but with a higher frame rate than the dedicated cloud, and it does not go online, providing high security. - U-BOX AT main unit ST#7704 - Close-up camera UCAM-CW50ABWH - AC adapter (charger) *For more details, please contact our company.

• others

The CX-WE100 (CXWE100) is a shake correction camera for helmets manufactured by Zacty Corporation. It can be used as a camera for the TANIZAWA U-BOX AT remote support wearable camera. It is connected to the U-BOX AT main unit ST#7704. *It connects using a separately sold USB conversion cable AtoC USB3-AFCM01BK. *The "USB conversion cable AtoC" converts the connector of the shake correction camera from Type-A to Type-C. For the U-BOX AT (WT/WZ) DE200, it has a Type-A interface, so it is not needed. *Additionally, a separately sold helmet mount AX-HM250 for the CX-WE100 is required. The powerful shake correction technology "Exstabilizer" corrects large and complex shakes in real-time during shooting, allowing for stable video output without shakes. It features FULL HD and 12.3 million pixels. It is dustproof and waterproof with an IP65 rating. It is registered with the Ministry of Land, Infrastructure, Transport and Tourism NETIS (New Technology Information System) under registration number KK-210059-A. The manufacturer warranty period is one year. *For more details, please contact us.

• others

● The CX-WE300 (CXWE300) is a chest-mounted stabilization camera manufactured by Zacty Corporation. ● It can be used as a camera for the TANIZAWA U-BOX AT remote support wearable camera. ● It is used in connection with the U-BOX AT main unit ST#7704. ● The powerful stabilization technology "Exstabilizer" corrects large and complex shakes in real-time during shooting, providing stable footage without shake. ● It connects using a separately sold USB conversion cable AtoC USB3-AFCM01BK. * The "USB conversion cable AtoC" converts the connector of the stabilization camera from Type-A to Type-C. It is not needed for the U-BOX AT (WT/WZ) DE200, as it has a Type-A interface. ● It is FULL HD. ● It has an IP65 dustproof and waterproof rating. ● It is registered with the Ministry of Land, Infrastructure, Transport and Tourism NETIS (New Technology Information System) under registration number KK-210059-A. ● The manufacturer warranty period is one year. * For more details, please contact us.

• others

● DK-SF03WT2 (DKSF03WT2) is the Sensor FOX Mizumoni 2 manufactured by Alinco. ● It notifies you via a standard email message when it detects flooding or drought. ● If you subscribe to the optional management app, you can check the presence of flooding at multiple locations on a map and overlay hazard maps on the status display of the sensor devices. You can centrally manage and store various data from multiple devices. ● It is suitable for use in municipal disaster prevention, factories, and facilities. ● You can check the water level from a remote location using a device. This allows you to respond before a disaster or accident occurs. ● It is dustproof and waterproof equivalent to IP54. * It is designed and manufactured to comply with the IP67 standard (dust-tight and waterproof), but it achieves IP67 only when the battery cover is properly closed. However, since users can open and close it, we cannot guarantee that the cover will be closed correctly, which is why it is rated as IP54 (dustproof and splash-proof). * The sensor is equivalent to IPX7 (waterproof). ● You can register up to 50 email addresses as recipients. ● The twin water level sensors will notify you of flooding and drought in stages.

• others

The BONX BOOST Full Pack is a Bluetooth headset (earphone microphone) made by BONX. The manufacturer model number is BX4-MBBK3. This product requires a subscription to the BONX WORK (paid plan). The full package includes a charging case, ear hangers (3 sizes for left and right), ear hooks (2 sizes), windscreen foam, ear caps (4 sizes), a neck strap, an expansion microphone, and a charging cable (Type-C to A). It is a headset designed for simultaneous call IP radio applications for business use. It pairs with a smartphone that has the BONX app installed, allowing for hands-free simultaneous calls via Bluetooth. When using the BONX app, the continuous call time is up to 10 hours, with a standby time targeted at over 500 hours. It is designed for long-duration operation. Weighing 10g, it is compact and lightweight. It can be worn on either ear. It has an IPX56 rating for dust and water resistance, and it is also shock-resistant, providing robustness to withstand various environments.

• others

The BONX BOOST Light Pack is a Bluetooth headset (earphone microphone) made by BONX. The manufacturer's model number is BX4-MBBK2. This product requires a subscription to BONX WORK (paid plan). The light package includes ear hangers (3 sizes for left and right), ear caps (4 sizes), and a charging cable (Type-A). It is a headset for a business-oriented simultaneous call IP radio application. It pairs with a smartphone that has the BONX app installed, allowing for hands-free simultaneous calls via Bluetooth. The continuous talk time when using the BONX app is up to 10 hours, with a standby time targeted at over 500 hours. It is designed for long-term operation. Weighing 10g, it is compact and lightweight. It can be worn on either ear. With an IPX56 rating for dust and water resistance, as well as shock resistance, it offers robust durability for various environments.

• others

The DK-SF100 (DKSF100) is a heat stroke warning system manufactured by Alinco. The DK-SF100 is a device that detects the heat index. Based on the detected WBGT value of the heat index, it sends notifications via email with the specified registered content. You can check the heat index from the app even when you are at a distance. You can receive notification emails regularly. *WBGT stands for Wet Bulb Globe Temperature, which is a heat index. It is an indicator that focuses on the heat exchange (thermal balance) between the human body and the outside air, incorporating three significant factors that affect the thermal balance of the human body: 1. Humidity, 2. Solar radiation and surrounding thermal environment, and 3. Temperature. This index was proposed in the United States in 1954 with the aim of preventing heat stroke. The unit is expressed in degrees Celsius (°C), but its value differs from that of temperature. You can view temperature and humidity as graph data. Measurement data can be visualized through a web application. It can be used simply by installation without the need for wiring. Communication uses Sigfox. It is suitable for factories, event venues, sports fields, and more.

• others

The DK-SF07 (DKSF07) is an inclination detection system manufactured by Alinco. The DK-SF07 is a system that detects inclination. The DK-SF07 consists of the following components: a terminal made up of a built-in inclination sensor and solar panel, an optional external water level sensor, and dedicated setup software. It detects inclination and sends an email to the registered address. The email also includes the voltage of the main power supply and backup battery. Additionally, when the battery is running low, it warns that "the battery level is decreasing. If the power generation from the solar panel decreases, operation may become unstable." After turning on the main power, it will notify via email at specified intervals that "regular transmission has been conducted" with no abnormalities. It is an eco-terminal equipped with a solar panel. An arbitrary number of terminals can be installed. If it detects an inclination or water level change that exceeds the pre-set limits, it will send email notifications to up to five email addresses.

• others

● XE1151 (XE-1151) is a power management and monitoring system for equipment manufactured by Alinco (ALINCO). ● It can be used for power management and monitoring of equipment. ● XE1151 can notify changes in the status of AC power outages and live power via Sigfox. It can continuously monitor power supply and outages. ● XE1151 can detect the opening and closing of doors and windows and send this information via Sigfox, notifying you of their status. ● XE1151 can send alerts for temperature controllers via Sigfox, notifying you of temperature anomalies. ● XE1151 can remotely notify alarm bell ringing and rotating light activation via Sigfox.

• others

●PMNN4807 (PMNN-4807) is an IMPRES lithium-ion battery manufactured by Motorola. ●It is a Li-Ion rechargeable battery for the digital/analog general-purpose radio MOTOTRBO R7. ●The battery capacity is 2200mAh. ●The battery life when used with the MOTOTRBO R7 is as follows: ・20 hours in the VHF band (4W output), 15 hours (1W output) ・19 hours in the UHF band (5W output), 14.5 hours (1W output) ●It is IP68 dustproof and waterproof. ●It can be equipped with a separately sold belt clip. *For more details, please feel free to contact us.

• others

The DK-SF03G (DK-SF03) is a Sensor FOX location management system manufactured by Alinco. It is an optimal GPS monitoring system for managing the location and quantity of vehicles and equipment within a large area. You can confirm the positions of sensors, vehicles, and equipment on the premises. The DK-SF03G is a location tracker that does not require real-time tracing. It captures location information through GNSS surveying. The geofence function can detect changes in a "designated area." It operates on two AA alkaline batteries. It can also be powered using the separately sold AC adapter EDC-323 with an AC100V power supply. When using the AC adapter, it is no longer dustproof or splash-proof. If installed outdoors, please use a resin waterproof case for protection. Metal cases cannot be used as they block signals. It can be charged via the USB connector with the separately sold DC cable UA0105. It can also be charged from the car's DC12V/24V cigarette lighter power using the cigarette DC/DC converter EDH-33. Additionally, it can be fixed to a wall using the separately sold mounting bracket ADBSF03G.

• others

●ADBSF03G (ADBSF-03G) is a fixed bracket made by Alinco. ●It is used to mount the Sensor FOX location management system DK-SF03G to the wall. ●Attach the DK-SF03G unit facing upwards to the wall using the included screws (black M3×12). * A Phillips screwdriver is required for screw installation.

• others

The RYK-MB3220W (RYKMB3220W) is a communication-type drive recorder manufactured by Mmobility Co., Ltd. It is a communication-type drive recorder that can be connected to the Mobile Create vehicle-mounted IP radio terminal IM-870. Communication to the server of the RYK-MB3220W is done via the IM-870, allowing for reduced communication costs. This communication-type drive recorder can simultaneously record high-quality images of the front of the vehicle and the interior. It can also acquire GPS location information. It sends real-time video of the vehicle's driving location and any dangerous driving or abnormal occurrences to the server. It integrates with the Mmobility operation management service DSMART, allowing emergency notifications to be sent to operation managers from DRSMART. Equipped with two cameras, it can simultaneously record images at a standard size of 1280x720. It features night vision camera functionality. By setting the interior camera to zoom in, it is also possible to check on following vehicles. It allows for simultaneous audio recording of the interior along with the images. It sends event detection (dangerous driving alerts) and dynamic management data.

• others

●EDC-323 (EDC323) is an AC adapter made by Alinco. ●It is an AC adapter for the DK-SF03 series, including the Sensor FOX Mizumoni 2 DK-SF03WT2 and the Sensor FOX Location Management System DK-SF03G, as well as for the power management and monitoring system XE1151. ●It is powered from an AC 100V source. ●When using the AC adapter, it will no longer be dustproof or splashproof. If used outdoors, please protect it with a resin waterproof case. Metal cases cannot be used as they block radio waves.

• others

●CAW5580 (CAW-5580) is an RS-232C connection cable manufactured by wave CSR (formerly Lecuo STANDARD). ●It is a data communication cable for the standard vehicle-mounted digital simple radio license station (3B/3C/3D) GX5580UCB. ●This cable is used to connect the radio to a computer or similar device. The connector on the PC side is compatible with RS-232C. ●It is recommended to have the installation done by the manufacturer to connect to the radio's circuit board. Additional installation costs will apply. *While customers can install it themselves, the manufacturer advises against it as it may cause malfunctions. ●The cable length is approximately 40 cm from the radio.

• others

The HP708 (Manufacturer Model Number: HP708 Uv) is a portable radio for onboard communication manufactured by Hytera. It is an explosion-proof type that meets the US explosion-proof standard UL 913 and the Canadian explosion-proof standard CSA 22.2. It can be used in locations where flammable and explosive atmospheres may exist, such as tankers or car carriers carrying LPG (liquefied petroleum gas), LNG (liquefied natural gas), or crude oil. It is also ideal for operation on tugboats. Its robustness is rated IP68, making it the strongest in dust and water resistance, capable of being submerged in 2 meters of water for up to 4 hours. It has obtained the US military MIL-STD (810G) certification, ensuring top-class durability, and can withstand a drop of 2 meters onto concrete. The battery life is up to 25 hours, based on an estimated usage of 5 hours of transmission, 5 hours of reception, and 90 hours of standby. The output can be switched between High at 2W and Low at 0.1W. With improved reception sensitivity and optimized transmission circuits, the communication range has increased by approximately 10% compared to conventional models. For more details, please feel free to contact us.

• others

●CAW5580E (CAW-5580-E) is an e-bridge connection cable made by Wave CSR. ●It is a cable for the standard vehicle-mounted digital simple radio license station (3B/3C/3D) GX5580UCB. ●This connection cable is used to connect the GX5580UCB to the smart wave telecommunications e-bridge adapter CET1378FA-S for communication with IP radios and digital MCA radios.

• others

●BM-GSRM3.5LC (BMGSRM35LC) is a 3.5mm LC earhook earphone made by B-EAR. ●It can be used with the B-EAR wireless guide systems BRIDGECOM GS-X5 (BM-GSX5), BRIDGECOM GS-T (BM-GST), BM-GSR, and BRIDGECOM LT-S (BM-LTS). ●The cable length is approximately 45.5 cm. ●The plug size is φ3.5mm. ●It has an earhook, so it won't fall out of your ear. *For more details, please feel free to contact us.*

• others

●EBC-70 (EBC70) is a belt clip made by Alinco. ●It is a belt clip that can be attached to specific low-power transceivers such as the Alinco DJ-P422B-TM / DJ-P422B-TL and DJ-P421LA / DJ-P421MA, which are part of the DJ-P421 series. ●It is a standard accessory for the DJ-P422B-TM, DJ-P422B-TL, DJ-P421LA, and DJ-P421M. It can be purchased as a spare or for repair purposes. ●It allows you to attach the specific low-power transceiver to your belt, accommodating belt widths of up to 4 cm. ●The transceiver can be mounted using one screw included with the product. ●There are two screw holes on the side of the belt clip for attaching the PTT switch cover EDS-44. The screws for securing the PTT switch cover are included with the EDS-44. *For more details, please feel free to contact us.*

• others

● EDS-44 (EDS44) is a PTT switch cover made by Alinco. ● It is designed for specific low-power transceivers DJ-P422B-TM / DJ-P422B-TL, DJ-P421LA / DJ-P421MA made by Alinco. ● It is fixed with two included screws to the separately sold belt clip EBC-70. ● When attached to the radio, you can transmit by lightly pressing the cover, which is like a lid. It is wider and larger than the PTT key, allowing for intuitive operation of the radio attached to your belt, and it can also be used as a PTT for Bluetooth microphones. *For more details, please feel free to contact us.

• others