エクセリ List of Products and Services

The BONX Stick is a Bluetooth microphone with PTT functionality made by BONX. The manufacturer model number is BN2-MBK1. It is a high-performance microphone for the business-oriented simultaneous communication IP radio app, BONX WORK. It pairs with a smartphone that has the BONX app installed (Apple devices running iOS 11 or later or Android devices running Android 5.1 or later) and connects via Bluetooth for transmission. It features a high-performance microphone that is easy to use in noisy environments, equipped with NTT's noise countermeasure technology, IML technology, making it effective in noisy settings such as construction sites and subway stations. Earphones are not included; you will need to purchase the separately sold wired earphones, BONX intro knot 3.5 M, or any commercially available 3.5mm wired earphones. The BONX Stick has a φ3.5mm stereo mini jack. It is equipped with a battery that allows for up to 15 hours of continuous operation. *For more details, please feel free to contact us.

The WM-1120 (WM1120) is a wireless guide handheld microphone transmitter manufactured by TOA Corporation. It uses the 322 MHz band for C-band (Type C) wireless microphones in the specific low-power radio frequency range. It features a PLL synthesizer system. The microphone sensitivity can be switched between two levels. It has two channels for tone squelch switching. The battery life is as follows: - When using separately sold AA alkaline batteries: approximately 20 hours - When using separately sold AA nickel-metal hydride batteries WB-2000: approximately 18 hours - When using separately sold AA nickel-metal hydride batteries WB-1000: approximately 10 hours To charge the AA nickel-metal hydride batteries WB-2000 / WB-1000A, a separately sold wireless guide charger (for 12 units) BC-1100A-12 is required. *For more details, please feel free to contact us.

The MV-P370M (MVP370M) is a unidirectional microphone made by JVC Kenwood. It comes with an ascending/descending 4-tone chime. It is a tabletop stand-type microphone. Being a unidirectional microphone, it is effective at reducing surrounding noise and feedback. (Note: A directional microphone picks up sound only from a specific direction.) It features a talk button that locks when turned to the right while pressed. There is a semi-fixed volume control for chime volume and microphone volume located on the bottom. It is suitable for hands-free broadcasting, making it ideal for in-house announcements, business broadcasts, paging, guidance, and conference use. It is powered by a household AC power supply of AC100V using the included AC adapter. The connector is a φ6.3 mono phone plug. *For more details, please feel free to contact us.*

● The MV-P370 (MVP370) is a unidirectional microphone manufactured by JVC Kenwood. ● It is an ideal tabletop stand microphone for indoor announcements and business broadcasts. ● Being a unidirectional microphone, it is effective in reducing surrounding noise and feedback. * A directional microphone is one that picks up sound from a specific direction only. ● It is equipped with a talk button that locks when turned to the right while pressed. In the locked state, hands-free broadcasting is possible. ● There is a semi-fixed volume control on the bottom for adjusting chime volume and microphone volume. ● It is powered by a household AC power supply of AC100V using the included AC adapter. ● The connector is a φ6.3 single-ended phono plug. * For more details, please feel free to contact us.

● The WX-CM200 (WXCM200) is a center microphone manufactured by Panasonic. ● It is a center microphone for the Panasonic J-DECT compliant 1.9GHz digital wireless intercom system (multi-party simultaneous communication intercom). ● It connects to the separately sold center unit WX-CX200 using a CAT5/CAT5e/CAT6 straight cable. The wiring distance between the WX-CX200 and WX-CM200 is up to 50m. ● By connecting to the center unit WX-CX200, two-way communication with the portable transceiver WX-CT200 is possible. Individual calls can also be made. ● An amplifier-equipped speaker can be connected for audio confirmation. ● The power supply is DC24V, provided from the center unit WX-CX200. *For more details, please feel free to contact us.*

● The WX-CM210 (WXCM210) is a talk microphone made by Panasonic. ● Earphones (3.5φ) are also included. The earphones come with three sizes of ear tips (large, medium, small). ● This is an earphone microphone for the portable transceiver WX-CT200. ● It connects to the WX-CT200 using the included transceiver connection cable. The connection cable has a coiled section, making it less likely to break if snagged. ● The microphone is a bidirectional electret microphone. ● There is a clip on the back of the microphone that allows it to be attached to clothing. ● The microphone itself is compact and lightweight, weighing about 17g (approximately 20g including the windscreen), making it comfortable to wear. ● A windscreen is also included to prevent wind noise. *For more details, please feel free to contact us.*

● The WM-1220 (WM1220) is a handheld wireless microphone manufactured by TOA Corporation. ● It is a handheld wireless microphone that complies with the specifications of the specific low-power radio station radio microphone (800MHz band) B band. ● It uses a PLL synthesizer system. ● You can select any one of the 30 channels in the B band with a switch for transmission. ● The transmission output can be switched between 2 mW (L) and 6 mW (H), allowing you to set it based on distance and interference considerations. ● It has been treated with antibacterial processing. ● It can be used with one AA dry battery or a separately sold rechargeable battery for wireless microphones (nickel-hydride DC 1.2V/1000mAh) WB-1000A. The battery life is approximately 14 hours (at 2mW) / approximately 10 hours (at 6mW). * The WB-1000A requires a separately sold BC-1000 for charging (charging time approximately 90 minutes, includes 2 rechargeable batteries). ● It can also be used with wireless amplifiers such as the WA-2800SC with SD/USB/CD.

● The WX-ST700 is a boundary-type wireless microphone manufactured by Panasonic. ● It is a boundary-type wireless microphone for a 1.9GHz digital wireless microphone system. With the collaboration between the microphone and remote camera, it enables immersive hybrid meetings and classes. ● It is used in conjunction with wireless receivers WX-SR202DAN / WX-SR204DAN, additional wireless receiver WX-SE200DAN, WX-SR202A / WX-SR204A, and WX-SE200A. ● It is a unidirectional microphone. ● It captures the voices of 1 to 2 speakers clearly when placed on a table and transmits audio to remote locations during online or hybrid meetings and classes. ● The talk button can be used for two functions: talk lock setting and push-to-talk (PTT) setting. ● The battery life is as follows: - When using two AA nickel-metal hydride batteries or two AA alkaline batteries: approximately 13 hours. ● It features a 4-level audio input level meter, allowing you to check the connection status and audio input. * For more details, please feel free to contact us.

● The WM-KG645 is a gooseneck microphone made by Panasonic. ● It is used as a gooseneck wireless microphone when combined with the separately sold tabletop wireless transmitter WX-ST600 from the PANASONIC 1.9GHz digital wireless microphone system. * Connect the WM-KG645 to the microphone input terminal of the WX-ST600. ● After combining the WX-ST600 and WM-KG645, it is used in conjunction with the wireless receivers WX-SR202DAN / WX-SR204DAN and the additional wireless receiver WX-SE200DAN. ● The length of the gooseneck microphone is 465mm. ● It can be flexibly bent. ● Accessories: - Wind screen ×1 - Instruction manual (this document) ×1 ● Other Panasonic wireless microphones include WX-ST700, WX-ST200, WX-ST210, WX-ST250, and WX-ST400. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. * For more details, feel free to contact us.

● The ST#7MIC-02 is a flexible microphone made by Tanizawa. ● It is used in conjunction with Tanizawa's wireless devices. ● Its magnetic design makes it ideal for installation on cranes or vehicles. ● The flexible microphone part is a long type, approximately 48 cm, allowing you to bring the microphone closer to your mouth. ● The connector part is a 3.5 mm plug type. 【Compatible Models】 Specific low-power transceivers / Multi-user simultaneous communication wireless systems - Echo Mate ST#717BX, ST#727M (Only compatible with ST#717BX) - Echo Mate ST#722B/LG (Only compatible with ST#722B) For extremely low-priced sales of earphone microphones and batteries, leave it to Excelli. * For more details, please feel free to contact us.

●ST#7MIC-03 is a flexible microphone made by Tanizawa. ●It is a microphone for the Tanizawa multi-party simultaneous communication wireless system, specifically for the Echo Mate master unit ST#727BX. ●Designed with a magnetic base, it is easy to install on cranes or vehicles. ●The flexible microphone part is approximately (under investigation) cm long. It can be bent flexibly to bring the microphone closer to the mouth. ●The connector part is (under investigation). 【Compatible Models】 Specific low-power transceiver/multi-party simultaneous communication wireless system ・ST#727BX / ST#727M ※For master unit ST#727BX For extremely low-priced sales of earphone microphones and batteries, leave it to Excelli. ※For more details, please feel free to contact us.

●FLM-02 (FLM02) is a flexible microphone made by EKO TECHNO. ●It is a microphone for radios. ●It uses a unidirectional microphone, making it suitable for use in noisy environments. * A unidirectional microphone is one that picks up sound only from a specific direction. ●The arm of the microphone can be bent freely. ●You can also attach a magnet to the PTT section as an option. For extremely low prices on earphone microphones and batteries, leave it to Excelli. For extremely low prices on earphone microphones and batteries, leave it to Excelli.

● The EMS-81 (EMS81) is a guide-use unidirectional microphone manufactured by Alinco. ● It can be used with the Alinco specific low-power transceiver DJ-TX31. ● When the ON/OFF switch is set to ON, it locks in the transmission state. ● Due to its sharp directionality (unidirectional), pointing it towards the mouth reduces the pickup of unnecessary surrounding noise, allowing the voice to be captured clearly. * A directional microphone is one that picks up sound only from a specific direction. ● It features a compact and high-quality metallic body. The color is a subdued champagne gold. 【Compatible Models】 Specific low-power transceiver/wireless guide system ・DJ-TX31 For extremely low-priced sales of earphone microphones and batteries, leave it to Excelli. * For more details, please feel free to contact us.

The L0CBAY000247 (old model number RP-VC151) is a pin-type monaural microphone made by Panasonic. It is a monaural microphone used in connection with wireless guide systems such as the Panasonic guide system transmitters RD-M650AZ, RD-M650Z, RD-M750-D, and RD-M550Z. It features a high-sensitivity electret condenser microphone unit. Since it uses a plug-in power method, no power supply is needed for the microphone itself. It has a compact design weighing approximately 14g. The plug size is 3.5mm, and the cable length is about 1m. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. For more details, feel free to contact us.

●CSM530 (CSM-530) is a flexible microphone (with magnet) made by wave CSR. ●It can be used with vehicle-mounted specific low-power transceivers like the GX100. ●The base part is magnetic, making it easy to install on the ceiling of a crane's cabin. ●There is no PTT (push-to-talk) switch, so audio is continuously transmitted. You don't need to take your hands off the handle or controller each time you transmit. ●The microphone head can be adjusted to a 180-degree angle. For extremely low-priced sales of earphone microphones and batteries, leave it to Excelli. *For more details, please feel free to contact us.

●CSM510B (CSM-510B) is a stand microphone made by wave CSR. ●It can be used in combination with the wave CSR wireless system base unit R9020 and the vehicle-mounted specific low-power transceiver GX100, among others. ●The base is magnetically mounted, making it easy to install inside a vehicle. ●It is also optimal for use when operating R9020 and GX100 as base stations. ●The microphone head can be adjusted in angle within a range of 180 degrees. ●It supports simultaneous calls. ●The microphone part comes with a windscreen cap, so wind noise is not a concern. ●With the base switch operation, you can easily turn the power ON/OFF and switch the microphone sensitivity between Hi/Low. Setting the microphone sensitivity to Hi makes it easier to pick up relatively quiet sounds, but it also picks up more surrounding noise, so Low is recommended when ambient noise is high. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

●CSM520B (CSM-520-B) is a boom microphone made by wave CSR (formerly Lecuo Standard). ●It can be used with the wave CSR's R9020 base station for work communication and the vehicle-mounted specific low-power transceiver GX100. ●It is designed to not obstruct when mounted on the ceiling inside a crane. ●It is also optimal for operation with R9020 and GX100 as base stations. ●The base is magnet-based, allowing for easy installation. ●The microphone head can be adjusted in angle within a range of 180 degrees. ●It supports simultaneous communication. ●The microphone part comes with a windscreen cap, so wind noise is not a concern. ●With the base switch operation, you can easily turn the power ON/OFF and switch the microphone sensitivity between Hi/Low. Setting the microphone sensitivity to Hi makes it easier to pick up relatively quiet sounds, but it also picks up surrounding noise well, so if the ambient sound is loud, Low is recommended. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

●CSM150 (CSM-150) is a stand microphone made by wave CSR. ●It is a stand microphone for the base station of the wave CSR tabletop specific low-power transceiver B1500. ●You can transmit audio by pressing the press-to-talk button (transmit button) mounted on the stand microphone. ●The microphone head can be adjusted at a 180-degree angle. 【Compatible Models】 Specific low-power transceiver ・B1500 For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

●CSM848 (CSM-848) is a stand microphone made by wave CSR (formerly Lecuo Standard). ●It can be connected to the base station CX848 of the communication system for work-related communication to transmit and receive audio. ●You can transmit audio by pressing the PTT button (transmit button) on the stand microphone. *The PTT button (transmit button) cannot be locked. ●It is a unidirectional microphone that picks up sound only from a specific direction, making it strong for use in noisy environments. ●It has a built-in speaker with a 0.5W output. The volume can be adjusted with a volume knob. ●It comes with an external speaker output terminal that can connect large speakers. ●The microphone head can be adjusted at a 180-degree angle. 【Compatible Models】 Multi-party simultaneous communication wireless system ・CX848 For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

●CSM530 (CSM-530) is a flexible microphone (with magnet) made by wave CSR. ●It can be used with vehicle-mounted specific low-power transceivers like the GX100. ●The base part is magnetic, making it easy to install on the ceiling of a crane or similar locations. ●There is no PTT (push-to-talk) switch, so audio is continuously transmitted. You do not need to take your hands off the handle or controller each time you transmit. ●The microphone head can be adjusted to a 180-degree angle. 【Compatible Models】 Specific low-power transceivers Radio repeaters ・GX100A For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, feel free to contact us.

The HM-238L (HM238L) is a tie-pin type microphone manufactured by Icom, compatible with sub-channel PTT functions. It is a microphone for radios. It has three PTT switches, supporting the sub-channel PTT function of the transceiver. *The sub-channel PTT function allows you to assign the main PTT (transmit) switch to the main channel (group), and assign the second and third PTT switches to the second and third channels (groups), enabling instant switching and transmission/reception across up to three channels (groups). It has an IP54 rating for dust and everyday water resistance (excluding the earphone jack). The connector for connecting to the radio is a 2-pin slim L-type connector. The tie-pin microphone part includes a Φ2.5mm 3-pole earphone jack. Please use it in combination with separately sold earphones. *Recommended Icom earphones sold separately include EH-15, EH-15B, SP28, and SP-26. *Commercially available earphones with a 2.5Φ plug size can also be used. *For more details, please feel free to contact us.

● The HS-92 is a helmet-mounted microphone made by Icom (with a crocodile clip for mounting). ● It is a helmet-mounted microphone that can be attached to commercial helmets. ● The mounting clip is a crocodile clip, making it easy to attach to the helmet. *Note: It may not be possible to attach it to some helmets with wide brims. ● By using the dedicated connection cable with built-in talk switch OPC-636, hands-free communication is possible. ● The microphone section comes with a windscreen cap to prevent wind noise. ● To use the HS-92, a separately sold dedicated earphone (plug diameter 2.5Φ, impedance 8.5Ω) such as EH-11, EH-12, EH-13, or EH-14 and a connection cable to connect to the radio unit are required. *Note: The optional items used may vary depending on the radio or transceiver. ● In addition to the compatible models listed below, it can also be used with IC-4055 (when used in combination with earphones and OPC-636 or OPC-661) and IC-4066 (when used in combination with earphones and OPC-636 or OPC-661). For extremely low-priced sales of earphone microphones and batteries, leave it to Excelli. *For more details, please feel free to contact us.

● HM-238PI (HM238PI) is a tie-pin type microphone compatible with sub-channel PTT functions made by Icom (ICOM). ● It can be used with radios that have a screw-in type 1-pin jack from Icom. ● It is equipped with three PTT (transmit) buttons, allowing you to operate the pre-set channels of the radio's sub-channel PTT function from the microphone in hand. ● The PTT (transmit) button is large and easy to press, making it possible to press firmly even while wearing gloves. ● The earphone jack size is 2.5Φ. Please use it in combination with separately sold recommended Icom earphones EH-15, EH-15B, SP28, SP-26. * While commercially available earphones with a 2.5φ plug can also be used, please be aware that differences in impedance may affect the volume. 【Compatible Models】 Specific low-power transceivers - IC-4310 - IC-4310L - IC-4400 / IC-4400L For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. * For more details, please feel free to contact us.

The HM-238LS (HM238LS) is a tie-pin type microphone compatible with sub-channel PTT functions, manufactured by Icom. It can be used with Icom's digital simple radio registered stations. It features three PTT (transmit) buttons, allowing you to operate the pre-set channels of the radio's sub-channel PTT function from the microphone in hand. The large and easy-to-press PTT button can be pressed firmly even while wearing gloves. The 360-degree rotating clip on the back of the microphone allows for secure attachment to your chest. The earphone jack size is 2.5Φ. Please use it in combination with separately sold recommended Icom earphones EH-15, EH-15B, SP28, SP-26. *Commercially available 2.5φ earphones can also be attached. 【Compatible Models】 Digital Simple Radio Registered Stations - IC-DPR4 / IC-DPR4C - IC-DPR4 LITE / IC-DPR4C LITE For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, feel free to contact us.

● The CSM500S (CSM-500S) is a stand microphone made by Standard. ● It is a stand microphone for the Standard vehicle-mounted digital simple radio GX5575VCD and GX5575UCD. ● It has a built-in speaker, allowing you to hear the received audio from the radio through the CSM500S and transmit as well. ● The microphone is omnidirectional, picking up sound from all directions at 360 degrees. ● Remove the original microphone and speaker CMP500S that comes with the radio, and connect the CSM500S to the microphone connection terminal. 【Compatible Models】 Vehicle-mounted digital simple radio ・GX5575UCD ・GX5575VCD For extremely low-priced sales of earphone microphones and batteries, leave it to Excelli. *For more details, please feel free to contact us.

The WM-P902 (WMP902) is a handheld wireless microphone manufactured by JVC Kenwood. It adopts a PLL synthesizer system that allows for the setting of 30 designated frequencies for the 800MHz band B-type wireless microphone, which does not require a license for use. It features a unidirectional moving coil type. Equipped with a dynamic microphone unit, it is suitable for vocals. This microphone can be used with portable wireless amplifiers PE-W50, PE-W50B, PE-W51SB-M, powered speakers PS-S222P(B), and wireless tuners (4-channel compatible) WT-914, WT-904-B, WT-904H, as well as wireless tuners (2-channel compatible) WT-912, WT-902-B, and WT-902H. Depending on the system configuration, up to 30 WM-P902 units can be used simultaneously, making it convenient for multiple groups to use at the same time in office meeting rooms or event venue partition booths. The PAD (input sensitivity) can be set in three levels. The maximum input sound pressure is 142dB SPL.

The "WX-4100B" is a wireless charger (contactless type) made by Panasonic. ● Please use it in combination with the 800MHz band PLL wireless powered speakers WS-X66A, WS-X77, and WS-66A. ● It features a highly clear unidirectional electret condenser microphone unit. * A directional microphone is one that picks up sound only from a specific direction. ● It can be used simultaneously with up to 15 channels. ● It can be powered by a single AA alkaline battery. ● By purchasing the separately sold rechargeable battery pack WX-4451 and the wireless charger (contactless type) WX-4450, it can also be used as a rechargeable wireless microphone. ● Battery life: - When using one AA alkaline battery: approximately 25 hours - When using one AA manganese battery: approximately 10 hours - When using the dedicated rechargeable battery pack WX-4451: approximately 8 hours ● The microphone head is antibacterial, and the internal net of the microphone uses acoustic antibacterial urethane to reduce mold and fungi. * Please use the included microphone adapter for the wireless microphone. ● It has an anti-roll feature, making it difficult to roll away even when placed carelessly on a desk or similar surface.

The WM-P772 (WMP772) is a wireless microphone (press-to-talk type) manufactured by JVC Kenwood. It is a wireless microphone that can be used without a license in the B band. It is an omnidirectional electret condenser type, picking up sound from all directions at 360 degrees. It has low distortion even when brought close to the mouth, providing high clarity. The microphone features an etiquette sheet to prevent clogging from saliva and other substances. The transmission output is 5mW. It can be used with portable wireless amplifiers PE-W50, PE-W50B, PE-W51SB-M, powered speakers PS-S222P(B), and wireless tuners (4-band compatible) WT-914, WT-904-B, WT-904H, as well as wireless tuners (2-band compatible) WT-912, WT-902-B, WT-902H. It has a shock-resistant curved body and is made of durable elastomer resin. It can be used continuously for about 26 hours with one AA alkaline battery or one dedicated rechargeable battery. When using a rechargeable battery, charging is done with chargers WT-C62 or WT-C63.

The EMS-924 is a stand microphone (with windscreen) made by Alinco. It is a microphone for the Alinco DR-PM300SE specific low-power transceiver for mobile and base stations. This is the same product as the standard components of the DR-PM300SE. Please use it as a replacement or spare. The microphone is a directional type, making it less likely to pick up surrounding noise during transmission, and the windscreen helps reduce wind noise during transmission. It is also easier to use outdoors. The microphone arm is a flexible type that can bend easily. It features a PTT lock to maintain the transmission state. There is also a MIC switch that allows you to turn off the microphone while keeping the transmission state. It has a 7-level microphone gain adjustment to increase or decrease the sound. You can make the sound louder, reduce distortion, and decrease feedback. *Microphone gain refers to determining the volume level at which sound picked up by the microphone is input, or the sound pressure level for input. The bottom part has an easily detachable magnetic base. 【Compatible Models】 Specific low-power transceiver for mobile and base stations ・DR-PM300SE

The B-CPM01 is a boom microphone specifically designed for the Bear X10 Compact. It can be used in combination with the Bear's specific low-power simultaneous communication transceiver, the BRIDGECOM X10 Compact (model number BM-X10CP). It connects directly to the BRIDGECOM X10 Compact unit. Please use it in combination with one of the separately sold earphones listed below: - Waterproof ear speaker 3.5Φ: BM-HPDP3.5 - X10 Compact dedicated earphone 3.5Φ: BM-CPL3.5 - X5 dedicated earphone 3.5Φ: BM-X5EP3.5 It features a flexible structure that allows it to be easily positioned near the mouth. It is a unidirectional microphone, meaning it picks up sound from one direction only, making it less likely to pick up surrounding noise even in noisy environments. There is also a waterproof ear speaker 3.5 boom microphone integrated model BM-HPDP3.5M available, which comes as a set with the separately sold X10 Compact dedicated boom microphone B-CPM01. 【Compatible Models】 Multi-user simultaneous communication wireless system - BRIDGECOM X10 Compact

The "CSM500" is a stand microphone made by wave CSR. It can be connected to a vehicle-mounted business radio made by wave CSR and used as a microphone for the base station. You can transmit audio by pressing the press-to-talk button (transmit button) on the stand microphone. The microphone head can be adjusted at a 180-degree angle. It is equipped with a 2W high-volume output speaker, allowing sound to be conveyed even in a large office. A 1m radio connection cable is included. 【Compatible Models】 Vehicle-mounted digital simple radio - GX5570UJD121 - GX5570UJD181 - GX5570UJF121 - GX5570UJF181 - GX5570VJD121 - GX5570VJF121 【Features】 ■ Easily adjustable boom microphone ■ Easy-to-press PTT button ■ 2W output speaker that is easy to hear even in large spaces ■ 1m radio connection cable included For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

The "MIC11LS" is a rugged handheld PTT switch and high-sensitivity microphone manufactured by Daiwa (Diamond). It can be used with Icom's digital simple radios and IP radios. It features a flat and easy-to-press PTT unit with high durability. It employs a high-sensitivity microphone capable of transmitting clear audio to the communication partner, ensuring reliable transmission and reception even in noisy environments. The cable is 4mm in diameter, making it resistant to breakage, and is recommended for use in more demanding work environments. It comes with a metal clip on the back of the microphone that can rotate 360 degrees. You can attach a separately sold Φ2.5mm earphone. 【Compatible Models】 Digital Low-Power Community Radio - IC-DRC1MK2 Digital Simple Radio Registered Station - IC-DPR30 IP Radios - IP100H - IP501H - IP502H 【Features】 ■ Designed for hard work ■ Includes a 360-degree rotating clip ■ High-sensitivity microphone resistant to noise ■ Durable cable For unbeatable prices on earphone microphones and batteries, trust Exceli. *For more details, please feel free to contact us.

The "MIC11K" is a rugged PTT switch and high-sensitivity microphone for handheld use, manufactured by Daiichi Denpa Kogyo (Diamond). It can be used with JVC Kenwood digital simple radios, specific low-power transceivers, and analog business radios. It features a flat and easy-to-press PTT unit with high durability. The high-sensitivity microphone enables clear audio transmission to the communication partner, ensuring reliable sending and receiving even in noisy environments. The cable is 4mm in diameter, making it resistant to breakage, and is recommended for use in more demanding work conditions. It comes with a metal clip on the back of the microphone that can rotate 360 degrees. 【Compatible Models】 Specific Low-Power Transceivers - UBZ-LP27R - UBZ-S27 - UBZ-S20 - UBZ-LP20 【Features】 - Designed for hard work - Includes a 360-degree rotating clip - High-sensitivity microphone resistant to noise - Durable cable For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

The "MIC11ID" is a rugged PTT switch and high-sensitivity microphone for handheld use, manufactured by Daiwa (Diamond). It can be used with Icom digital simple radios, specific low-power transceivers, and analog business radios. It features a flat and easy-to-press PTT unit with high durability. The high-sensitivity microphone allows for clear voice transmission to the communication partner, ensuring reliable sending and receiving even in noisy environments. The cable is 4mm in diameter, making it resistant to breakage, and is recommended for use in more demanding work environments. It comes with a metal clip on the back of the microphone that can rotate 360 degrees. 【Compatible Models】 General Business Radios - IC-UH38MFT Digital Simple Radios - IC-DPR7S - IC-DPR7SBT - IC-DU65B Specific Low-Power Transceivers - IC-4500 - IC-4800 【Features】 ■ Designed for hard work environments ■ Includes a 360-degree rotating clip ■ High-sensitivity microphone resistant to noise ■ Durable cable For extremely low prices on earphone microphones and batteries, trust Exceli. *For more details, please feel free to contact us.

The "MIC11KD" is a rugged PTT switch and high-sensitivity microphone for handheld use, manufactured by Daiwa (Diamond). It can be used with JVC Kenwood's digital general-purpose radios and digital simple radio licensed stations. It features a flat and easy-to-press PTT unit with high durability. The high-sensitivity microphone allows for clear voice transmission to the communication partner, ensuring reliable sending and receiving even in noisy environments. The cable is 4mm in diameter, making it resistant to breakage, and is recommended for use in more demanding work environments. It comes with a metal clip on the back of the microphone that can rotate 360 degrees. You can attach a separately sold Φ2.5mm earphone. 【Compatible Models】 Digital General-Purpose Radios - TCP-D143 - TCP-D243 - TCP-D343 【Features】 ■ Designed for hard work ■ Includes a 360-degree rotating clip ■ High-sensitivity microphone resistant to noise ■ Durable cable For unbeatable prices on earphone microphones and batteries, trust Exceli. *For more details, please feel free to contact us.

The "MIC11M" is a durable PTT switch and high-sensitivity microphone for handheld use, manufactured by Daiwa (Diamond). It can be used with specific low-power transceivers equipped with a 2-pin jack from Icom and Alinco. It features a flat and easy-to-press PTT unit with high durability. The high-sensitivity microphone allows for clear voice transmission to the communication partner, ensuring reliable sending and receiving even in noisy environments. The cable is 4mm in diameter, making it resistant to disconnection, and is recommended for use in more demanding work environments. It comes with a metal clip on the back of the microphone that can rotate 360 degrees. You can attach a separately sold Φ2.5mm earphone. 【Compatible Models】 Specific low-power transceivers: - DJ-CH272 - DJ-P25 - DJ-PX31 - IC-4110 【Features】 ■ Designed for hard work ■ Includes a 360-degree rotating clip ■ High-sensitivity microphone resistant to noise ■ Durable cable For extremely low-priced earphone microphones and batteries, please leave it to Excelli. *For more details, feel free to contact us.

The "B-E08tnt" is a pin-type splash-proof microphone for the Bear (B-EAR) X10. It can be used with the Bear multi-user simultaneous communication wireless system BRIDGECOM X10. You can start a conversation in simultaneous communication mode by pressing the PTT button located on the side of the microphone. In half-duplex mode, you can transmit audio. It has an IP54 rating, providing dust and water resistance suitable for everyday use, so it can be used without issues even if it gets wet from water or sweat. It can be used in combination with separately sold earphones. The back of the microphone features a clip that allows you to attach it to your chest. It is an omnidirectional microphone that can pick up sound from any angle. The microphone cable length is approximately 85 cm. 【Compatible Models】 Multi-user simultaneous communication wireless system - BRIDGECOM X10 【Features】 ■ Hands-free communication ■ Everyday water resistance ■ Easy-to-pick-up omnidirectional microphone ■ Microphone cable length of 85 cm For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

The HM-238MC is a tie-pin type microphone compatible with sub-channel PTT functions, manufactured by Icom. It can be used with Icom's IP radios and satellite communication transceivers. The microphone features three PTT (transmit) buttons and can be used with radios that support the sub-channel PTT function. You can operate and transmit the pre-set channels directly from the HM-238MC. The large PTT button is easy to press, allowing for reliable operation even when wearing gloves. The 360-degree rotating clip on the back of the microphone allows for secure attachment to your chest. With an IP54 dust and water resistance rating, it can be safely used in rainy conditions or dusty environments. 【Compatible Models】 Satellite Communication Transceiver System - IC-SAT100 IP Radio - IP700 【Features】 - 360° rotating clip - Large, easy-to-press PTT button - Three channel PTT buttons - IP54 dust and water resistance For extremely low prices on earphone microphones and batteries, trust Excelli. *For more details, please feel free to contact us.

The HM-163MC is a tie-pin microphone made by Icom. It can be used in combination with Icom radios that have a special 14-pin jack. You can transmit by pressing the PTT button on the side of the microphone. It features a simple straight cable that is easy to adjust in length and convenient to use. It is equipped with a windscreen cap that cuts wind noise, allowing for clear audio transmission even in noisy environments like construction sites. On the back of the microphone, there is a 360-degree rotating clip that can be fixed to your chest or collar, and a clip that can be attached to the cable is also included. It has a φ2.5mm earphone jack, allowing you to connect separately sold earphones to prevent sound leakage during calls. 【Compatible Models】 IP Radios - IP700 Satellite Communication Transceiver System - IC-SAT100 【Features】 - Integrated earphone and microphone - Secure screw-type connection - Compatible with Φ2.5mm earphones - Durable commercial-grade earphones For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

The "B-E06tn" is a pin-type microphone windscreen made by Bear (B-EAR) for the BRIDGECOM X10. It can be used with the Bear multi-user simultaneous communication wireless system BRIDGECOM X10. It supports simultaneous communication mode and can be used hands-free with a separately sold earphone with a 2.5mm plug size. The back of the microphone has a clip that allows you to attach it to your chest. It is an omnidirectional microphone that picks up sound from all angles. It comes with a windscreen cap to prevent wind noise, making it suitable for outdoor use. The microphone cable length is 70cm. 【Compatible Models】 Multi-user simultaneous communication wireless system - BRIDGECOM X10 【Features】 ■ Hands-free communication ■ Wind cap to prevent wind noise ■ Omnidirectional microphone that easily picks up sound ■ Microphone cable length of 70cm For extremely low-priced earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

The "WM-D170SW-K" is a dynamic microphone manufactured by Panasonic. It is a handheld microphone that can transmit audio when combined with the Panasonic wireless guide system, Panaguide. The microphone has excellent sound isolation against surrounding noise and disturbances, is resistant to feedback, and features a hypercardioid (super-directional) design with high sensitivity in a specific direction. It can be used as a handheld microphone for transmitting audio in situations such as factory or construction site tours, lectures, and shareholder meetings, where sound needs to be transmitted from one to many. It comes with a 5-meter long cable, allowing for versatile use in various situations. 【Compatible Models】 Wireless Guide System - RD-M750-D - RD-M650AZ 【Features】 ■ High-sensitivity super-directional microphone ■ 5-meter long cable ■ Clear audio transmission even in noisy environments ■ Compact and lightweight design For affordable sales of earphone microphones and batteries, please leave it to Excelli. *For more details, feel free to contact our company.

The "WX-1700" is a vocal-type wireless microphone transmitter made by Panasonic. It is a 300MHz band speech microphone that can transmit audio when combined with the Panasonic wireless guide system, Panaguide. It adopts a PLL synthesizer method with high frequency stability, allowing it to transmit stable audio with minimal noise even in noisy environments such as factories and construction sites. Being wireless, it can be operated without cables, allowing users to move freely without restrictions. This microphone has a built-in antenna and features a smart, compact design. It also supports the use of dry batteries, operating for approximately 26 hours on a single alkaline AA battery. 【Compatible Models】 Wireless Guide System - RD-M750-D - RD-M650AZ 【Features】 ■ Compact design with built-in antenna ■ Wireless type ■ Clear sound quality with minimal noise ■ Operates for about 26 hours on AA batteries ■ Compact and lightweight For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

● EME-48AMY (EME48AMY) is a professional microphone manufactured by Alinco (ALINCO). ● It is a microphone that can be used with Alinco's 800MHz band radio microphone type B digital guide system transmitter DJ-TX80, among others. ● It is a tie-clip microphone type. ● It comes with a rotating clip on the back of the microphone. ● It has a 2.5mm headphone jack. ● If you want to monitor your own voice through headphones while transmitting with the DJ-TX80, please use it in combination with separately sold headphones EME-27 (earhook type) or AD001 (canal type). *For more details, please feel free to contact us.

● The AM-6 is a microphone with a magnetic base made by Icom. ● It is a microphone with a magnetic base for the IC-MS5880, a simultaneous communication type transceiver for work communication. ● The magnetic base makes it easy to secure the microphone. ● It can be fixed to the dashboard or other surfaces using the included screws, making it convenient to secure in places where magnets cannot be used. ● It has a microphone mute function. ● The LED allows you to check the status of the switch. ● It features a flexible arm that can be bent easily. *For more details, please feel free to contact our company.*

● The HS-86 is a helmet-mounted microphone made by Icom. ● It is a helmet-mounted microphone that can be attached to professional helmets. ● It is a simple type that just requires inserting a clip into the helmet. The helmet fastener is a clip. * Please note that it may not be compatible with some helmets that have a wide brim. ● By using the dedicated communication switch built-in connection cable OPC-636, hands-free communication is possible. ● The microphone section comes with a windscreen cap to prevent wind noise. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. * For more details, please feel free to contact us.