エクセリ List of Products and Services

The WH-150-3HA-09 (WH1503HA09) is a rooftop whip antenna (hole mount type) manufactured by Nippon Antenna for the 150MHz band. It is an antenna for radio equipment operating in the 150MHz band. The element is bent, with a 65-degree angle in the middle of the element. It is a whip antenna that is mounted by drilling a hole. The mounting hole diameter is φ23mm, and the mounting plate thickness is 15mm or less. The installation location is on the car's rooftop. * A whip antenna is one that has no directivity and can receive and transmit signals from any angle. It features an NJ connector. It is designed for a specific frequency within the 150MHz range. Please specify the fo (center frequency) in MHz when placing your order. It is a product that complies with safety standards. It is made to order. Please inquire about the delivery time. Included accessories: One instruction manual. There are also models available with a straight NJ connector (WH-150-3H-09) and an L-type NJ connector (WH-150-2H-09) that do not have a bent element. * For more details, please feel free to contact us.

• others

The WH-450-3H-09 (WH4503H09) is a rooftop whip antenna (hole-mount type) manufactured by Nippon Antenna for the 400MHz band. It is an antenna for radios operating in the 400MHz band. This is a whip antenna that requires hole mounting. The mounting hole diameter is φ23mm, and the thickness of the mounting plate should be 15mm or less. The installation location is on the car's rooftop. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. It features an NJ connector. It operates at a specified frequency within the 400MHz range. Please specify the center frequency (fo) in MHz when placing your order. It is a product that complies with safety standards. This is a made-to-order product. Please inquire about the delivery time. Included accessories: One instruction manual. * For more details, please feel free to contact us.

• others

The WH-150-3H-09 (WH1503H09) is a whip antenna (through-hole type) for rooftop use in the 150MHz band, manufactured by Nippon Antenna. It is an antenna for radios operating in the 150MHz band. This is a whip antenna that is mounted by drilling a hole. The mounting hole on the vehicle should be φ23mm, with a mounting plate thickness of 15mm or less. The installation location is on the car's rooftop. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. It features an NJ connector. It is designed for a specified frequency within the 150MHz band. Please specify the fo (center frequency) in MHz when placing your order. This product complies with safety standards. It is a made-to-order product. Please inquire about the delivery time. Included accessories: 1 instruction manual. There are also models available with a straight NJ connector bent at a 60-degree angle (WH-150-3HA-09) and an L-shaped NJ connector (WH-150-2H-09). * For more details, please feel free to contact us.

• others

● HGW-150-1PN-09 (HGW1501PN09) is a 150MHz 1/2λ element (NP type) manufactured by Nippon Antenna. ● It is a λ/2 non-radial type antenna for radio equipment in the 150MHz band. ● Please use it in combination with the separately sold NJ type base for installation. ● Since it is a specified frequency in the 150MHz band, please specify the fo (center frequency) in MHz when placing an order. ● The model number changes with frequency. - HGW-150-1PN-09 140-143: Frequency 140-143MHz - HGW-150-1PN-09 143-146: Frequency 143-146MHz - HGW-150-1PN-09 146-150: Frequency 146-150MHz - HGW-150-1PN-09 150-155: Frequency 150-155MHz - HGW-150-1PN-09 155-160: Frequency 155-160MHz - HGW-150-1PN-09 160-165: Frequency 160-165MHz - HGW-150-1PN-09 165-170: Frequency 165-170MHz * For more details, please feel free to contact us.

• others

● The HGB-150-2-09EL is a 150MHz band vehicle-mounted high-gain element (MP type) manufactured by Japan Antenna. ● It is an antenna for vehicle-mounted radios. ● It is an element of a 150MHz band 5λ/8 whip antenna with a garter mount. ● Since the HGB-150-2-09EL is a specified frequency in the 150MHz band, please specify the fo (center frequency) MHz when placing your order. ● Due to the fixed frequency of the HGB-150-2-09EL, there are also products with the following model numbers. These are not made to order. ・HGB-150-2-09EL 150-153: Frequency 150-153MHz ・HGB-150-2-09EL 153-156: Frequency 153-156MHz ・HGB-150-2-09EL 156-160: Frequency 156-160MHz ● There is also the HGB-150-2A-09, which is a set of the HGB-150-2-09EL and RSB-BA3-MJ, and the HGB-150-2B-09, which is a set of the HGB-150-2-09EL and RSB-BA5-MJ. *For more details, please feel free to contact us.*

• others

● The HGW-150-1PN-09 is a 150MHz 1/2λ element (NP type) made by Japan Antenna. ● It is a λ/2 non-radial type antenna for radio equipment in the 150MHz band. ● The model number changes depending on the frequency. Please choose from the model numbers below. ・HGW-150-1PN-09 140-143: Frequency 140-143MHz ・HGW-150-1PN-09 143-146: Frequency 143-146MHz ・HGW-150-1PN-09 146-150: Frequency 146-150MHz ・HGW-150-1PN-09 150-155: Frequency 150-155MHz ・HGW-150-1PN-09 155-160: Frequency 155-160MHz ・HGW-150-1PN-09 160-165: Frequency 160-165MHz ・HGW-150-1PN-09 165-170: Frequency 165-170MHz ● It has an NP type connector. ● Please use it in combination with the separately sold NJ type base for installation. ● Since it is a specified frequency in the 150MHz band, please specify fo (center frequency) MHz when placing your order. *For more details, please feel free to contact us.

• others

● The HG-1501 (HG1501) is a 150 MHz band collinear antenna manufactured by Nippon Antenna. ● It is an antenna for radio equipment. ● It is designed for a specified frequency within 145 to 170 MHz. Please specify the fo (center frequency) in MHz when placing your order. ● It features an NJ connector. ● This antenna has a high gain of 5.15 dBi with multiple stages of radiating elements (antenna elements). ● The radiating elements are covered with an FRP (fiber-reinforced plastic) cover, providing excellent waterproofing and strength. ● It is DC shorted to prevent damage to the radio equipment from induced lightning. ● Its lightweight design makes installation at high locations easy. A separately sold mounting bracket is required. *For more details, please feel free to contact us.*

• others

● WX-SR202DAN/WX-SR204DAN are wireless receivers manufactured by Panasonic. ● They are wireless receivers compatible with the Dante audio network for a 1.9GHz digital wireless microphone system. In a single system, up to 16 wireless microphones can be used. *Dante refers to the audio network standard developed by Audinate. It allows for the transmission of up to 512 channels of uncompressed audio signals over a gigabit Ethernet network with low latency. ● The difference between WX-SR202DAN and WX-SR204DAN is that the WX-SR202DAN can use 2 wireless microphones, while the WX-SR204DAN can use 4 wireless microphones. ● Up to three additional wireless receivers, WX-SE200DAN, can be added. Each WX-SE200DAN can support up to 14 wireless microphones, and the WX-SR204DAN can support a maximum of 16 wireless microphones. *For more details, please refer to the PDF document or feel free to contact us.

• others

The WX-SE200A (WXSE200A) is an expansion wireless receiver manufactured by Panasonic. It is an expansion wireless receiver for a 1.9GHz digital wireless microphone system. It can be used with up to four wireless microphones. You can connect up to three WX-SE200A units to the wireless receivers WX-SR202A / WX-SR204A. By connecting three WX-SE200A units to the WX-SR204A, you can use a maximum of 16 wireless microphones. *Compatible wireless microphones include: boundary type wireless microphone WX-ST700, handheld type wireless microphone WX-ST200, tabletop wireless transmitter WX-ST600 + gooseneck microphone WM-KG645, splash-proof wireless microphone WX-ST210, dynamic type wireless microphone WX-ST250, lapel type wireless microphone WX-ST400, and wireless transmitter WX-ST510, among others. *For more details, please refer to the PDF document or feel free to contact us.

• others

The WX-SE200DAN is a Panasonic-made expansion wireless receiver. It is a wireless expansion receiver compatible with the Dante audio network of the 1.9GHz band digital wireless microphone system. *Dante refers to the audio network standard developed by Audinate, which allows for the transmission of up to 512 channels of uncompressed audio signals over a gigabit Ethernet network with low latency. It comes standard with a 4-channel tuner. You can connect up to three WX-SE200DAN units to the wireless receivers WX-SR202DAN and WX-SR204DAN. By connecting three WX-SE200DAN units to the WX-SR204DAN, you can use up to 16 wireless microphones. *Compatible wireless microphones include the boundary type wireless microphone WX-ST700, handheld wireless microphone WX-ST200, tabletop wireless transmitter WX-ST600, and gooseneck microphone WM-KG645, among others. *For more details, please refer to the PDF document or feel free to contact us.

• others

● The WX-SR202A/WX-SR204A is a wireless receiver made by Panasonic. ● It is a wireless receiver for a 1.9GHz band digital wireless microphone system. It is a single system that can use up to 16 wireless microphones. ● By connecting the separately sold wireless antenna WX-SA250A, it receives audio from wireless microphones or portable wireless transmitters, adjusts the volume, and outputs the sound. Up to 8 wireless antennas can be connected. ● It supplies power to the wireless antenna. ● The difference between the WX-SR202A and WX-SR204A is that the WX-SR202A can use 2 wireless microphones, while the WX-SR204A can use 4 wireless microphones. * Compatible wireless microphones: Wireless microphone (boundary type) WX-ST700, wireless microphone (handheld type) WX-ST200, tabletop wireless transmitter WX-ST600 + gooseneck microphone WM-KG645, etc. * For more details, please refer to the PDF materials or feel free to contact us.

• others

● The IC-R15 is a wideband handheld receiver made by Icom. ● It covers a wide frequency range from 108 to 500 MHz. ● It features an easy mode for beginners, allowing users to simply select registered reception targets categorized in advance to listen. Additionally, it has a favorites function that enables quicker selection of frequently listened memory channels. ● It can receive and record two signals simultaneously, allowing for the collection of more information. ● Recorded audio can be saved as WAV files on a microSD card, enabling data playback at any time without the worry of missing anything. Furthermore, it can record while audio is being played back, and information such as frequency, mode, S-meter, and time (user-set) can also be recorded along with the audio. ● It is equipped with Bluetooth functionality, allowing the use of devices such as VS-3 and S9 IJKP. ● The scan speed is approximately 150 channels per second (in VFO mode). *For more details, please refer to the PDF document or feel free to contact us.*

• others

● The LC-203 is a carrying case made by Icom. ● It is a dedicated carrying case for the wideband handheld receiver IC-R15. ● It protects the IC-R15 from scratches, impacts, and dirt. ● When attaching a strap to the IC-R15, please ensure it is fitted in a way that it does not catch on the Velcro of the carrying case. *For more details, please feel free to contact our company.*

• others

● CS-R15 is a programming software made by Icom. ● It is a cloning software specifically for the wideband handheld receiver IC-R15. ● You can manage memory channels, program scan edges, category settings, group settings, program scan links, group links, radio memory editing, common settings, and more for the IC-R15. It can be used in various set modes. ● Files can be saved to a computer or microSD card. *For more details, please feel free to contact us.*

• others

● The IPB01G is a portable power supply with a built-in reusable battery manufactured by JVC Kenwood. ● Its main feature is that it utilizes high-quality recycled batteries from electric vehicles (Nissan Leaf), contributing to the SDGs. ● It is resistant to temperature changes and operates in environments ranging from -20°C to +60°C. ● With low self-discharge, it can maintain 92% of its power after six months and 84% after one year when stored fully charged, making it useful for disaster preparedness and BCP measures. Once charged, it can be left unused for about a year. ● It allows for approximately 2000 charge and discharge cycles (repeated charging), which is about three times that of standard rechargeable batteries. ● It has an output of 600W (with a peak of 1200W) and a HIGH-POWER mode of 900W, which can be switched with a single touch. ● The IPB01G can be charged using the following methods: - Using an AC adapter (AC100V): approximately 9.5 hours - Using a car adapter: approximately 14 hours ● The manufacturer's warranty period is 36 months. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli.

• others

The DR-DPM62W is a digital simple radio registered station 3R/3T (DCR) manufactured by Alinco. It is a UHF 351MHz band digital simple radio registered station (5W or 2W output) that supports 82 channels and can communicate as an IP radio using the app radio Air-InCom.Lite. By pairing with your smartphone, you can operate both the app radio and the digital simple radio registered station. There are three ways to transmit: 1. Transmit as a digital simple radio registered station (communication distance is about several kilometers). 2. Transmit as an app radio call using Air-InCom.Lite (anywhere in Japan). 3. Simultaneous transmission of both the digital simple radio registered station and the app radio call Air-InCom.Lite. It is equipped with a relay function for communication between the app radio and the digital simple radio registered station. In addition to the secret codes compatible with other companies, Alinco adds its own secret key to achieve high-security encryption. With 524,272 combinations of secret codes, calls made through the app radio are impossible to intercept, similar to mobile phones. The antenna connector on the radio side is MJ. The manufacturer offers a one-year free warranty. For more details, please refer to the PDF materials or feel free to contact us.

• others

● ACP-100L/ACP-101L is the Alinco app radio "Air-InCom.Lite." ● The model number varies depending on the OS. ・ iOS: ACP-100L ・ Android OS: ACP-101L ● This is an app radio service provided by Alinco, and individual customers can also contract it. Please contract directly with Alinco; we cannot act as an intermediary. ● You can choose any channel from the pre-prepared open channel 500ch for communication. In other words, you can communicate with anyone nationwide who has a matching channel if they are contracted with Air-InCom.Lite. ● The secret channel costs 250 yen per month (excluding tax), and the fee is incurred only by the host. ● There is only one host per channel. The host can freely change the members belonging to the secret channel. ● When you purchase the DR-DPM62W, you can use a coupon code to try Air-InCom.Lite for free for up to 3 months with one account. * Please feel free to contact us.

• others

The EMS-938W (EMS938W) is a speaker microphone made by Alinco. It can be plugged into Alinco's app-compatible vehicle-mounted digital simple radio DR-DPM62W or amateur radios, allowing you to connect via Bluetooth to the app radio Air-Incom for calls. 【Compatible Models】 - ACP-100L / ACP-101L (Air-Incom.Lite) - DR-BU60D - DR-DPM60 / DR-DPM60E - DR-DPM61 / DR-DPM61E - DR-DPM62W - DR-PM300SE For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, feel free to contact us.

• others

● The WM-KG645 is a gooseneck microphone made by Panasonic. ● It is used as a gooseneck wireless microphone when combined with the separately sold tabletop wireless transmitter WX-ST600 from the PANASONIC 1.9GHz digital wireless microphone system. * Connect the WM-KG645 to the microphone input terminal of the WX-ST600. ● After combining the WX-ST600 and WM-KG645, it is used in conjunction with the wireless receivers WX-SR202DAN / WX-SR204DAN and the additional wireless receiver WX-SE200DAN. ● The length of the gooseneck microphone is 465mm. ● It can be flexibly bent. ● Accessories: - Wind screen ×1 - Instruction manual (this document) ×1 ● Other Panasonic wireless microphones include WX-ST700, WX-ST200, WX-ST210, WX-ST250, and WX-ST400. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. * For more details, feel free to contact us.

• others

● The WX-ST700 is a boundary-type wireless microphone manufactured by Panasonic. ● It is a boundary-type wireless microphone for a 1.9GHz digital wireless microphone system. With the collaboration between the microphone and remote camera, it enables immersive hybrid meetings and classes. ● It is used in conjunction with wireless receivers WX-SR202DAN / WX-SR204DAN, additional wireless receiver WX-SE200DAN, WX-SR202A / WX-SR204A, and WX-SE200A. ● It is a unidirectional microphone. ● It captures the voices of 1 to 2 speakers clearly when placed on a table and transmits audio to remote locations during online or hybrid meetings and classes. ● The talk button can be used for two functions: talk lock setting and push-to-talk (PTT) setting. ● The battery life is as follows: - When using two AA nickel-metal hydride batteries or two AA alkaline batteries: approximately 13 hours. ● It features a 4-level audio input level meter, allowing you to check the connection status and audio input. * For more details, please feel free to contact us.

• others

● The SRFD51 / SRFD51-L is a specific low-power transceiver manufactured by Yaesu Musen. ● Yaesu Musen's STR On-Demand Intercom realizes "Always Connected, Therefore Safe." ● The STR On-Demand series allows for dual-channel reception unique to its design. By utilizing a simultaneous reception method using two channels, a leader can receive communications from different groups at the same time and provide appropriate instructions and communications. ● It features a teleport function that allows the same group currently in use to switch channels with the press of a button during interference. If you are out of the communication range and cannot teleport, a short press of the teleport key will automatically find and switch to the member's communication channel. ● You can select the optimal channel using the area research function, which analyzes the radio wave conditions on-site and finds channels that are less likely to experience interference. ● Once you press the access key to start talking, hands-free communication is possible, and it automatically returns to receiving mode when you stop talking. ● It is equipped with a class-leading 700mW speaker, allowing for clear audio even in noisy construction site environments. * For more details, please refer to the PDF document or feel free to contact us.

• others

●SRFD55 / SRFD55-L is a specific low-power transceiver manufactured by Yaesu Musen. ●It is a model equipped with a one-touch display switching function and multifunction keys. ●It features dual-channel reception unique to the STR On-Demand series. By utilizing simultaneous reception using two channels, the leader can receive communications from different groups at the same time and provide appropriate instructions and communications. ●It includes a teleport function that allows the same group in use to switch channels with the press of a button during interference. If you are out of the communication range and cannot teleport, a short press of the teleport key will automatically find and switch to the communication channel of the members. ●You can use the area research function to analyze the radio wave conditions on-site and find channels that are less prone to interference, allowing you to select the optimal channel. ●By pressing the access key once to start talking, hands-free communication is possible, and it automatically returns to receive mode when you stop talking. ●It is equipped with a class-leading 700mW speaker, allowing clear audio even on construction sites. ●You can also communicate without using a relay when a relay station is in use. *For more details, please refer to the PDF document or feel free to contact us.*

• others

●SRNX100 / SRNX100x are vehicle-mounted IP radios (IP transceivers) manufactured by Yaesu Musen Standard Horizon (STR). ●You can make simultaneous calls anywhere in Japan as long as you are within the coverage area of NTT Docomo 4G LTE or au 4G LTE. ●The only differences between SRNX100 and SRNX100x are as follows: - SRNX100: Bluetooth compatible - SRNX100x: Not Bluetooth compatible ●It supports simultaneous calls, group calls, and individual calls. ●Equipped with a high-quality, loudspeaker of 3W on the front of the main unit and 1W on the included handheld microphone, it allows for clear communication even in noisy construction sites. Additionally, you can connect an optional external speaker MLS-200 (3M) with a maximum output of 12W to use it as a loudspeaker (PA function). ●Both the radio unit and the microphone have an IP54 rating for dust and everyday water resistance, making them safe to use in light rain or dusty environments. ●The warranty period is 3 years. *For more details, please refer to the PDF document or feel free to contact us.

• others

● The SHB-29 is a belt clip made by Yaesu Musen. ● It is the standard accessory belt clip for the specific low-power transceivers SRFD51, SRFD51-L, SRFD55, and SRFD55-L. ● It is used to attach the transceiver body to a belt. ● It is compatible with belt widths up to 4.6 cm. ● It is secured with 2 screws U03306027 for the SHB-29 belt clip. *For more details, please feel free to contact us.*

• others

● The SHA-10 is an armband made by Yaesu Musen. ● You can communicate by speaking towards the arm intercom while wearing the specific low-power transceivers SRFD51, SRFD51-L, SRFD55, and SRFD55-L on your arm. ● The band width is approximately 3 cm, and the band length is about 45 cm. ● Use the included screws to attach the mounting hardware to the band buckle. ● Please note that it cannot be used when attaching carrying cases SHC-49, SHC-43, or quick-release holsters SHB-33, SHB-28. *For more details, please feel free to contact us.*

• others

● The SHB-33 is a quick-release holster made by Yaesu Musen. ● It is designed for the Yaesu Musen specific low-power transceivers SRFD51 / SRFD51-L and SRFD55 / SRFD55-L. ● It is compatible with the compact high-capacity lithium-ion battery SBR-51LI. * Please use the quick-release holster SHB-28 when using the lithium-ion battery SBR-42LI. ● It comes with a belt clip compatible with belts up to 4.6 cm wide. ● The radio can be attached and detached with one touch. * For more details, please feel free to contact us.

• others

● The SSM-23A is a speaker microphone made by Yaesu Musen. ● It is a speaker microphone for Yaesu Musen's specific low-power transceivers SRFD51 / SRFD51-L and SRFD55 / SRFD55-L. ● The microphone features a 360° rotating belt clip on the back. ● The connector is an L-shaped φ3.5mm plug. ● It has a high dust and waterproof rating of IP67. *For more details, please feel free to contact us.*

• others

● The SBH-46 is a two-pocket charger sleeve made by Yaesu Musen. ● It is a connected charger for the Standard Horizon specific low-power transceivers SRFD51 / SRFD51-L and SRFD55 / SRFD55-L. ● It is used in combination with the separately sold AC adapter for the connected charger (for AC100V) SAD-52A / SAD-50A or the DC adapter with a cigarette plug (for DC12V) SDD-20. * When the USB port is not in use. ● Up to 5 units can be connected, allowing for simultaneous charging of up to 10 radios. ● It is equipped with an LED lamp to check the charging status. - Red light: Charging - Green light: Charging complete - Red blinking: Charging error ● The charging time is as follows: - For lithium-ion battery SBR-42LI: Approximately 3 hours - For compact high-capacity lithium-ion battery SBR-51LI: Approximately 3 hours ● There is also a one-pocket charger sleeve SBH-59. * For more details, please feel free to contact us.

• others

●SAD-35A is an AC adapter made by Yaesu Musen. ●It is used in combination with the Standard Horizon single pocket charger sleeve SBH-59. ●It can charge the radios SRFD51 / SRFD51-L and SRFD55 / SRFD55-L in about 3 hours. ●It is powered by a household AC power supply of 100V. ●Connection charging is not possible. *For more details, please feel free to contact us.*

• others

● The SDD-20 is a DC adapter with a cigarette plug made by Yaesu Musen. ● It can power Standard Horizon's specific low-power transceivers SRFD51 / SRFD51-L and SRFD55 / SRFD55-L from a vehicle. ● The following usage methods are available: - Connect 6 units of the 1-pocket charger sleeve SBH-59 to charge 6 radios simultaneously in about 3 hours. - Connect 3 units of the 2-pocket charger sleeve SBH-46 to charge 6 radios simultaneously in about 3 hours. *When the USB port is not in use. ● It is powered by DC 12V. *For more details, please feel free to contact us.

• others

The IP50G (IP-50-G) is an IP gateway manufactured by Icom (ICOM). 【Main Features】 ■Embedded Platform The IP50G operates by writing applications developed and designed using the SDK, allowing for the construction of highly flexible systems tailored to user needs. ■Supports Routing Using 5G/LTE Connections It is compatible with various frequency bands of 5G as well as LTE. ■IEEE802.11ax Compliant IP Gateway It enables communication at a theoretical maximum of 1.2Gbps in the 5GHz band and 574Mbps in the 2.4GHz band. ■Dustproof Unit Available for Attachment to the Main Unit By attaching the dedicated option MBZ-2 to the main unit, it can achieve IP5X dustproof performance, making it safe to use in environments with dust, such as factories. It can also be wall-mounted, and fixed to a mast (additional MB-89 required). ■Other Features - Dual SIM support (au/docomo). - Equipped with three programmable function keys that can be set for each user. - Comes with dedicated brackets for wall or ceiling installation.

• others

● The MCU-50 is a charging sleeve with a USB Type-C connector made by Yaesu Musen. ● It is used by connecting it to a separately sold USB Type-C cable SCU-65 and a commercially available USB Type-C charger (1A or more). ● It can charge one unit of the specific low-power transceivers SRFD51 / SRFD51-L, SRFD55 / SRFD55-L. ● The charging time is approximately 3 hours. ● It is equipped with an LED lamp that indicates the charging status. - Red light: Charging - Green light: Charging complete - Red blinking: Charging error ● Daisy chaining for charging is not possible. * For more details, please feel free to contact us.

• others

● The IP700 PLUS is a hybrid IP transceiver made by Icom. ● The IP700 PLUS is compatible with the new wave. It increases the existing digital simple radio registered station (3R) from 30 channels to 82 channels by adding 52 channels for the new wave. The existing airborne channels increase from 5 channels to 15 channels by adding 10 channels for the new wave. *Note: Airborne channels are receive-only. The existing digital simple radio licensed station (3B) increases from 65 channels to 95 channels by adding 30 channels for the new wave (3C/3D). *Note: Support for relay (3D) 20 channels is planned. ● It has two functions: LTE communication via IP and direct communication via digital simple radio, allowing communication via digital simple radio even when out of mobile phone network coverage or during LTE line troubles. ● Normally, it can be switched between LTE mode for communication with IP radios and DCR mode for communication with digital simple radios. ● In LTE mode, simultaneous calls without a limit on the number of participants are possible. In DUAL mode, only alternating calls are allowed. *For more details, please refer to the PDF document or feel free to contact us.

• others

● The SCU-65 is a USB Type-C cable made by Yaesu Musen. ● It is used in combination with a commercially available USB Type-C charger (1A or more) and the separately sold charging sleeve USB Type-C terminal MCU-50. ● It can charge specific low-power transceivers SRFD51 / SRFD51-L and SRFD55 / SRFD55-L in about 3 hours. ● The length of the cable is approximately 100 cm. ● Both ends of the connector are USB Type-C. *For more details, please feel free to contact us.*

• others

● The SBR-51L is a compact, high-capacity lithium-ion battery manufactured by Yaesu Musen. ● Below are the charging times. ・ For the set with the AC adapter SAD-52A or SAD-50A for the linked charger and the single pocket charger sleeve SBH-59 (can charge 10 units simultaneously): approximately 3 hours. ・ For the set with the AC adapter SAD-35A and the single pocket charger sleeve SBH-59 (not linkable): approximately 3 hours. ・ For the set with the DC adapter SDD-20 with a cigarette plug and the single pocket charger sleeve SBH-59 (can charge 6 units simultaneously): approximately 3 hours. ・ For the set with the AC adapter SAD-52A or SAD-50A for the linked charger and the dual pocket charger SBH-46 (can charge 10 units simultaneously): approximately 3 hours. ・ For the set with the DC adapter SDD-20 with a cigarette plug and the dual pocket charger SBH-46 (can charge 6 units simultaneously): approximately 3 hours. ・ For the set with the charger sleeve MCU-50 with USB Type-C port, USB Type-C cable SCU-65, and a commercially available USB Type-C charger (1A or more) (not linkable): approximately 3 hours. * For more details, please feel free to contact us.

• others

●SBT-18 is a battery case made by Yaesu Musen. ●It can operate the Yaesu Musen specific low-power transceivers SRFD51 / SRFD51-L and SRFD55 / SRFD55-L using three AA alkaline batteries. ●The operating time is approximately 14 hours. *For more details, please feel free to contact us.

• others

The IC-DU75 PLUS is a new wave-compatible digital simple radio license station manufactured by Icom. The differences from the IC-DU75 are as follows: It increases the existing digital simple radio license station (3B) 65 channels by adding 30 channels for the new wave compatible digital simple radio registered station (3C/3D), resulting in a total of 95 channels. *The relay (3D) 20 channels are planned to be supported. *There are no changes to functions or performance other than for the new wave. It is equipped with a Bluetooth unit. It has GPS functionality that can be transmitted to the other station. It features a sub-channel PTT function that allows transmission and reception between up to 3 channels without the need to switch channels. It has ruggedness that meets the U.S. Department of Defense procurement standards (MIL-STD-810G) tests. With an IP67/66/55/54 dust and water resistance rating, it can be safely used in rain and sandy conditions. It is equipped with a loudspeaker with a volume of 800mW that is easy to hear even in noisy environments. The antenna connector on the radio side is SMA-J. The manufacturer offers a free warranty period of 3 years. *For more details, please refer to the PDF document or feel free to contact us.

• others

The IC-DU6505BPLUS is a new wave-compatible digital simple radio license station manufactured by Icom. The differences from the IC-DU6505B are as follows: It increases the existing digital simple radio license station (3B) from 65 channels to 95 channels by adding 30 channels for the new wave-compatible digital simple radio registered station (3C/3D). *The relay (3D) 20 channels are planned to be supported. *There are no changes to functions or performance other than the new wave. It has an IP54 rating for splash and dust resistance, allowing for safe use in environments with light rain or water splashes. It supports 511 types of user codes, enabling efficient communication with counterparts using the same code setting. It is equipped with a short message function, allowing for the transmission of both voice and text data. With a secret key function supporting 32,767 types of encryption keys, it reduces the risk of eavesdropping. It features a voice recording and playback function that can record received audio content, allowing for the storage of up to 30 recordings totaling 5 minutes. The antenna connector on the radio side is MJ. It comes with a 1-year manufacturer's warranty. *For more details, please refer to the PDF document or feel free to contact us.

• others

The IC-DU6505BNPLUS is a new wave-compatible digital simple radio licensed station manufactured by Icom. The differences from the IC-DU6505BN are as follows: It increases the existing digital simple radio licensed station (3B) 65 channels by adding 30 channels for the new wave compatible digital simple radio registered station (3C/3D), resulting in a total of 95 channels. *The relay (3D) 20 channels are planned to be supported. *There are no changes to functions or performance other than for the new wave. It is equipped with an interface that connects to IP lines, allowing for the expansion of the communication range and operational modes of conventional digital radios. It has an IP54 rating for splash and dust resistance, making it safe to use in environments with light rain or water splashes. It comes standard with HM-206#32 and is equipped with a GPS unit, allowing for GPS data acquisition. It features a loudspeaker function that outputs microphone audio directly from an external speaker connected to the IC-DU6505BNPLUS, enabling it to be used as a loudspeaker. The antenna connector on the radio side is MJ. It comes with a one-year manufacturer's warranty. *For more details, please refer to the PDF document or feel free to contact us.

• others

● The AD-152 is a power supply unit manufactured by Icom. ● The manufacturer model number is AD-152#13. ● It can supply power to Icom's hybrid IP transceivers IP700 PLUS, IP700, IP700S, IP700SV, IP700SU, IP700SV BT, and IP700SU BT from a household AC 100V source. ● It is an AC adapter that provides constant power supply, making it ideal for use in standby mode for receiving. ● Please note that it cannot be used for charging. ● Please be aware that the power supply adapter and AC adapter cannot be detached. *For more details, please feel free to contact us.*

• others

● The WX-PS200 is a portable wireless amplifier made by Panasonic. ● It is a portable wireless amplifier for a 1.9GHz digital wireless microphone system. ● It provides stable communication with high sound quality and is resistant to radio interference and crosstalk. ● Equipped with a standard 3-channel tuner unit, it can use up to three wireless microphones. ● It can play audio sources from an SD card. Frequently used items like radio calisthenics and school songs can be easily played back if recorded on an SD card. ● It supports Bluetooth, allowing connection with smartphones, tablets, etc. ● It is battery-operated, enabling continuous use for about 5 hours (when using 10 AA alkaline batteries). ● With a high output of 60W, it delivers loud sound. It also supports a dual-unit mixing function (60W + 60W) for use in larger spaces. ● It is compatible with a Φ35mm pole mount, allowing it to be installed on speaker stands. *For more details, please feel free to contact us.*

• others

The BRIDGECOM R2 Field Receiver is a specific low-power dual-channel radio receiver manufactured by B-EAR. The manufacturer model number is BM-R2FR. It is a radio receiver capable of receiving communications from specific low-power transceivers in the 421MHz, 422MHz, and 440MHz bands, allowing you to hear the sender's voice. It is a dual-band type that can simultaneously receive on 2 channels and supports up to 47 channels. The mounting method can be chosen according to the situation, such as on the wrist, upper arm, or back. It features a compact and lightweight design with a shock-resistant structure that is strong against drops and impacts. It has an IP54 rating for everyday water and dust resistance, making it reliable even on rainy days. With a speaker output of 1.5W, it enables smooth communication with the sender. The dial-type channel selection makes operation easy. This product is reception-only and cannot transmit. There are no communication fees involved. *For more details, please refer to the PDF document or feel free to contact us.*

• others

● The DMCA(ST2) is a microphone switcher manufactured by Ecotech, allowing for the switching between two ST-01 stand microphones. ● It is used when you want to connect two microphones to an MCA Advance/Digital MCA wireless radio. ● This is a set product that includes the DMCA(ST2) adapter (with cable) and two ST-01 stand microphones. The radio and stabilized power supply are sold separately. ● You can use the microphone that has the PTT switch pressed. ● Previously, the included stand microphone was the UEM-300, but as of January 24, 2024, it has been changed to the ST-01. *For more details, please feel free to contact us.*

• others

● The DMCA (10KST) is a microphone switcher made by Eco Techno (EKO TECHNO) that allows switching between a keypad speaker microphone and an ST-01 stand microphone. ● It is used when you want to connect two microphones to an MCA Advance/Digital MCA wireless radio. ● The DMCA (10KST) is a set product that includes an adapter (with cable) and one ST-01 stand microphone. The radio, keypad speaker microphone, and stabilized power supply are sold separately. ● It is used in a configuration that switches between the keypad speaker microphone and the ST-01 stand microphone. ● The stand microphone ST-01 is switched using a PTT switch. At this time, the microphone on the keypad speaker microphone side is muted. ● Since the line does not disconnect, it is possible to interrupt the conversation. ● There are also microphone switchers available, such as the DMCA (10K2) for switching between two keypad speaker microphones and the DMCA (ST2) for switching between two ST-01 stand microphones. *For more details, please feel free to contact us.*

• others

● The DJ-P116R is a compact multi-repeater manufactured by Alinco for specific low-power use. ● It supports 27 relay channels and up to 4 wireless linked repeaters in an alternating (half-duplex) relay mode. Since wired connections are not required, flexible installation is possible. *Compatible linked repeater devices (as of January 29, 2024): DJ-P240 compatible lot, DJ-PX7, DJ-PHM20, DJ-P322, DJ-P113R, DR-PM300SE ● It has become smaller than conventional repeaters, increasing installation flexibility. Additionally, its compact size allows for discreet placement without disrupting the atmosphere of a store. ● Equipped with a high-performance noise cancellation feature that reduces environmental sounds (background noise) picked up by the radio, enabling clearer conversations than before. ● Settings can be configured using dedicated software or the remote control mode of compatible subunits. Configuration is possible even in environments without a PC. ● It adopts a foldable and rotatable high-performance 1/4λ antenna. ● Designed for indoor installation. ● Installation is possible from a household power supply of AC100V. Even during linked relay operation, it consumes a maximum of about 220mA, which is low for approximately two small transceivers. *For more details, please feel free to contact us.

• others