マイクロニクス List of Products and Services

The system can perform relative evaluations for debugging purposes during pre-assessments before formal testing or in the event of failure. It is a popular simple measurement tool because it allows for low-cost checks of noise components and enables subsequent system upgrades. It can simply measure the frequency bands emitted by the DUT. It is particularly effective for EMC noise countermeasures, radio law compliance, and confirming unwanted radiation. In formal tests using a shielded room, while it may not be possible to identify absolute values, it is possible to check whether unspecified frequencies are being emitted outside the specified limits by combining a spectrum analyzer with a simple loop antenna. 【System Configuration】 ■ EMI Spectrum Analyzer [MSA438E] ■ N to SMA Coaxial Cable 1.5m ■ Small Loop Antenna (set of two sizes) *For more details, please refer to the PDF document or feel free to contact us.

• others

This is an introduction to a case where conducted EMI (noise terminal voltage) measurement was achieved easily and inexpensively using an EMI spectrum analyzer and LISN. The EMI spectrum analyzer "MSA438E" is equipped with the necessary functions for conducting EMI tests and is designed for EMI measurements. By using the dedicated EMI measurement software "MAS430," you can simply specify the standards you want to measure, such as CISPR11, 22, EN55011, 22, FCC Part 15, and VCCI, and the required parameters like bandwidth and threshold level will be automatically set. 【System Configuration】 ■ EMI Spectrum Analyzer [MSA438E] 　/ Lithium-ion Battery [MB400] ■ MSA438E Calibration Set ■ EMI PC Software [MAS430] / USB Cable [MI400] ■ LISN [MPW201B] ■ Noise Cut Transformer ■ Connection Cable N→BNC Cable [MC102+MA306] *For more details, please refer to the PDF document or feel free to contact us.

• others

This is an introduction to the field maintenance of disaster prevention administrative wireless systems using handheld signal analyzers. Handheld signal and spectrum analyzers are suitable for inspecting and maintaining radios in the field, as well as for exploring interference and jamming waves in the system. They play a crucial role in the early detection of repairs and failures during system malfunctions, as well as in preventing issues before they occur. 【Solutions】 ■ Handheld Signal Analyzers - MSA538: Frequency range 20kHz to 3.3GHz - MSA558: Frequency range 20kHz to 8.5GHz * There is also an MSA538TG with a built-in tracking generator. * For more details, please refer to the PDF document or feel free to contact us. 【System Configuration】 ■ Handheld Signal Analyzer [MSA538] (20kHz to 3.3GHz) ■ Handheld Signal Analyzer [MSA558] (20kHz to 8.5GHz) ■ Handheld Signal Analyzer [MSA438] (50kHz to 3.3GHz) * For more details, please refer to the PDF document or feel free to contact us.

• others

We received an inquiry asking, "Can the MSA500 series measure LoRa signals?" and conducted actual measurements. "LoRa" is one of the LPWA (Low Power Wide Area) technologies that uses the 920MHz band, allowing direct communication over distances of up to 10 km, characterized by low power consumption. LoRa signals employ a special modulation method called chirp spread spectrum. As a result of our measurements, we were able to capture LoRa signals (LPWA using the 920MHz band) using the real-time mode of our "MSA500 series signal analyzer." 【System Configuration】 ■ Handheld Signal Analyzer (MSA538) ■ Sleeve Antenna for 920MHz Band (M401) *For more details, please refer to the PDF document or feel free to contact us. 【Product Introduction】 ■ Handheld Spectrum Analyzer MSA538 ■ Portable Antenna M401~407 *For more details, please refer to the PDF document or feel free to contact us.

• others

Our company can conduct a simple "radiated immunity test" at frequencies from 80MHz to 500MHz with an electric field strength of 30V/m for pre-evaluation before bringing the equipment under test (EUT) to the EMC test site and for confirming the effectiveness of countermeasures. To perform the radiated immunity test at low frequencies of 80MHz to 500MHz with an electric field strength of 30V/m, we use a very confined space, the anechoic chamber, compared to a shielded room, by placing a small loop antenna close to the EUT (within ~5cm). [Test Procedure] [Calibration] 1) Place the electric field probe at the EUT installation position for calibration. 2) Adjust the level of the signal generator to achieve the desired electric field strength. 3) Determine the level of the signal generator. [Test] 1) Install the EUT and set it to the level of the signal generator determined during calibration. 2) Conduct tests to check if the EUT malfunctions. 3) Repeat the tests while moving the antenna up, down, left, and right. *For more details, please refer to the PDF document or feel free to contact us.

• others

We offer a cost-effective "Electromagnetic Wave Radiation Pattern Measurement System" that requires no installation and is space-saving. By using this measurement system, you can measure the electromagnetic wave radiation patterns of small wireless devices and antennas. The anechoic chamber is equipped with electromagnetic wave absorbers on all six sides. It blocks unwanted electromagnetic waves and interference from the outside, suppressing reflections of electromagnetic waves emitted from the EUT inside, thus providing a stable measurement environment with a wide dynamic range. 【Anechoic Chamber Specifications (Base Model: MY5310S)】 ■ External Dimensions: Approximately 1345(W) × 1220(H) × 1080(D) mm 　　　　　　* Excluding caster height and protrusions ■ Door Opening Dimensions: Opening dimensions approximately 510(W) × 910(H) mm ■ Weight: Approximately 300–460 kg * Dependent on the electromagnetic wave absorbers ■ Turntable: φ220 mm, load capacity 10 kg * For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce a system that can receive GPS signals even inside buildings where GPS signals do not reach. With the GPS signal retransmission system, it is possible to set up in-vehicle devices that use GPS signals, such as car navigation systems and dash cameras, indoors where GPS signals are unavailable. This is a retransmission system that receives GPS signals with an outdoor receiving antenna, amplifies them, and then retransmits them with indoor transmitting antennas. It can radiate GPS signals from up to six transmitting antennas. 【Product Introduction】 ■ GPS Signal Retransmission System "MN1600" *For more details, please refer to the PDF materials or feel free to contact us.

• others

We will introduce the differences in measurement results due to antenna variations and the selection methods. In pre-compliance tests for radiated EMI (emissions), it is important not only to have high-performance measuring instruments but also to select the appropriate receiving antennas to measure lower levels of noise. Small and medium-sized biconical antennas have inferior performance compared to biconical antennas, but they are smaller in size and highly portable. They are convenient for situations where frequent transport is required during on-site measurements or when used close to the equipment under test (EUT) for noise exploration. Selecting the right antenna according to the environment in which it will be used is crucial. [Solutions] ■ Automatic measurement software ■ Spectrum analyzers ■ Various antennas *For more details, please refer to the PDF materials or feel free to contact us.

• others

The MR2150 is a pre-compliance system for conductive EMI testing. By using this system for debugging evaluation before conducting the official tests at an EMC site, you can significantly reduce development costs. Since the spectrum/signal analyzer, LISN, and PC software are all developed in-house, the overall usability and operational stability of the system have been thoroughly verified. Additionally, each component is reasonably priced, providing a cost-effective testing environment. 【Features】 ■ Provides a reasonable and cost-effective testing environment ■ Handheld spectrum/signal analyzers that can be selected based on budget and performance/features ■ Efficiency in EMI testing through rich software functionalities ■ Excellent portability of the LISN *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "MY5550" is a locally assembled radio wave absorption partition that realizes an ideal space for confirming the directivity and gain of antennas used in 5th generation mobile communications and millimeter-wave radar, simulating various communication tests, and applying and developing in-vehicle sensing technologies, all at low cost and short delivery times. By assembling a six-sided partition to create a space and fixing radio wave absorbers to the inner wall surfaces, it converts radio waves into heat, suppressing reflection and transmission of radio waves. A dedicated iron plate is laid on the floor to match the size of the partition, distributing the load. By reducing the pressure applied to a single point, it accommodates more locations during measurements. As it is equipment not subject to construction industry and fire safety regulations, the procedures for installation are straightforward. 【Features】 ■ Realizes an ideal space for radio waves at low cost and short delivery times ■ No need for large-scale construction with locally assembled design ■ Short construction period (basic installation work takes 1 day + radio wave absorber installation takes 1 day) ■ Suitable for confirming the directivity and gain of antennas used in 5th generation mobile communications and millimeter-wave radar, simulating various communication tests, and applying and developing in-vehicle sensing technologies *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "MY2520" is a production line type electromagnetic shielding box with a moderate size suitable for A4 equivalent products, accommodating a wide range of applications while reducing equipment costs. Thanks to its one-touch locking mechanism, the shielding effect is maintained despite easy opening and closing, which also reduces the burden on operators. It is integrated with a base, allowing for anti-tipping measures that can be fixed to work desks or shelves. It supports various customizations based on actual operating conditions (additional costs apply). Options include surface processing for IF modules, IFM1 to IFM6, and electromagnetic wave absorbers. 【Features】 ■ Compact electromagnetic shielding box for production lines of radios, terminals, modules, etc. ■ Moderate size suitable for A4 equivalent products ■ One-touch locking mechanism reduces tact time ■ Improves reproducibility of various communication tests ■ Accommodates a wide range of applications, reducing equipment costs *For more details, please refer to the PDF document or feel free to contact us.

• others

The "MSA500 Series" is a handheld signal analyzer that combines real-time and sweeping methods. By incorporating both real-time processing using Fast Fourier Transform (FFT) and traditional sweeping methods, it allows for the utilization of the advantages of both approaches. 【Features】 ■ Real-time plus sweeping method ■ Comprehensive analysis functions ■ Time domain analysis that expands the capabilities of the analyzer ■ Does not miss unwanted spectra ■ Powerful triggering functions ■ Captures modulation signals from most wireless communications ■ Built-in large capacity memory of 16K frames and high-speed USB transfer ■ Average noise level -162dBm/Hz ■ Compact and lightweight at 1.8kg ■ 4 hours of battery operation ■ Data storage on USB memory *For more details, please refer to the PDF document or feel free to contact us.

• others

At Japan Cash Machine Co., Ltd. (JCM), we manufacture and sell currency processing equipment, financial-related devices, cash registers, and gaming-related equipment. Our currency processing machines are used in over 110 currencies worldwide, and we hold a dominant market share in the North American and European gaming markets. We have cleared all the stringent regulations specific to the industry and obtained numerous licenses. JCM has become synonymous with casino banknote validators, leveraging our local support capabilities as an advantage in the global market. Our MR2300 EMI testing system is chosen by customers leading the industry. For more details, please contact us or refer to our catalog.

• others

The DSRC in-vehicle device tester ME9100 is a tester that checks whether the in-vehicle device installed in a vehicle communicates properly at the wireless level. It is an essential tool for automotive dealers, car accessory stores, or automotive maintenance companies that perform installation work, ensuring that they provide customers with reliably functioning equipment. The ME9100 sends FCMC and checks whether ACTC and WCNC return correctly from the in-vehicle device. The power automatically turns off approximately 6 seconds after the test starts (about 8 seconds for the DSRC in-vehicle device), extending battery life. It can conduct roughly 500 tests. For more details, please contact us or refer to the catalog.

• others

The DSRC communication unit offers four models. Broadly, they can be classified into WCN reading and electric field strength measurement. It also features data save/load and USB communication capabilities. The models include "ME9115A," which reads the WCN of the onboard unit and displays a 12-digit ID number; "ME9115AC," which measures the electric field strength between the roadside unit and the onboard unit; "ME9115A+C," a combination of ME9115A and ME9115C; and "ME9115ACN," which measures the electric field strength from a moving vehicle to the roadside unit and can also measure the electric field strength of the onboard unit. For more details, please contact us or refer to the catalog.

• others

The MY1525 has a shielding performance of 90dB (typical value). It supports various applications in a wide frequency range of 800MHz to 6GHz. The design features a fully opening front door (left-opening) for smooth DUT replacement operations. It comes standard with an exhaust fan and intake port. For more details, please download the catalog or contact us. 【Features】 ○ Shielding performance: 90dB (typical value) ○ Supports various applications in a wide frequency range of 800MHz to 6GHz ○ Fully opening front door (left-opening) design allows for smooth DUT replacement ○ Standard equipped with exhaust fan and intake port 【Specifications】 ○ External dimensions: 460 (W) × 575 (D) × 570 (H) mm (excluding handles, etc.) ○ Internal dimensions: 340 (W) × 400 (D) × 340 (H) mm ○ Weight: approximately 17 kg (excluding I/F module) ○ Shielding performance: 90dB (typical value at 2.4GHz) ○ Absorption performance: 20dB or more (MYA-77: above 1.2GHz) ○ Fan: 0.56 cubic m/min (maximum airflow) ○ Connectors: 2 SMA (rear) and 1 dedicated I/F module (1 rear) ● For more details, please download the catalog or contact us.

• others

The MY1520SW comes standard with a large shielded window. The internal state of the RF shielded box can be visually monitored, allowing for constant observation of the EUT's state changes from the outside. It accommodates a wide range of testing environments, including issues caused by radiated noise affecting display content and operation verification during high-speed data communication. For more details, please download the catalog or contact us. 【Main Features】 - Standard large shielded window - Visual monitoring of the internal state of the RF shielded box, enabling constant observation of EUT state changes from the outside - Accommodates a wide range of testing environments, including issues caused by radiated noise affecting display content and operation verification during high-speed data communication 【Other Features】 - Shielding performance of 70 dB (typical value at 2.4 GHz) - A cover for light shielding is provided, ensuring thoroughness during illuminance and brightness measurements - Supports a variety of interfaces ● For more details, please download the catalog or contact us.

• others

MY1515 offers high quality and reliability provided by a measurement instrument manufacturer. It excels in cost performance and has a short delivery time! It is a radio shielded box covered with a radio wave absorber inside. It suppresses heat rise inside the box, achieving an ideal testing environment for long hours of continuous operation. For more details, please download the catalog or contact us. 【Features】 - High quality and reliability provided by a measurement instrument manufacturer - Excellent cost performance and short delivery time - Radio shielded box covered with a radio wave absorber - Suppresses heat rise inside the box, achieving an ideal testing environment for long hours of continuous operation 【Specifications】 - External dimensions: 465 (W) × 465 (D) × 214 (H) mm (excluding handles, etc.) - Internal dimensions: 400 (W) × 400 (D) × 150 (H) mm - Weight: Approximately 10 kg (excluding I/F module) - Shielding performance: 70 dB (typical value at 2.4 GHz) - Absorption performance: 20 dB or more (MYA-75: above 2.4 GHz) - Fan: 0.56 cubic m/min (maximum airflow) - Connectors: 8 SMA (8 on the back) - I/F module: 1 unit (1 on the back) ● For more details, please download the catalog or contact us.

• others

The ME8662 comes in two models: the shielded-only "ME8662N" and the radio-shielded compatible "ME8662E." The ME8662N can block external noise to measure high-impedance circuits and components. The ME8662E is ideal for evaluating transmission and reception in coaxial cable connections for small wireless communication devices (mobile phones, wireless LANs, ETC on-board units). For more details, please download the catalog or contact us.

• others

The ME8668 is a model suitable for mass production environments equipped with an automatic transport system suitable for production lines. It is ideal for technical standard conformity tests, reception sensitivity tests, EMC tests, etc. For more details, please download the catalog or contact us. 【Features】 ○ Equipped with an automatic transport system suitable for production lines ○ Model for mass production environments ○ Suitable for technical standard conformity tests, reception sensitivity tests, EMC tests, etc. 【Specifications】 ○ External dimensions: 922 (W) × 794 (H) × 731 (D) mm (excluding protrusions) ○ Automatic transport system → Dimensions: 634 (W) × 436 (H) × 260 (D) mm → Transportable item: 150 (W) × 150 (H) × 150 (D) mm ○ Internal dimensions → 801 (W) × 610 (H) × 610 (D) mm ○ Weight: Approximately 94 kg (including the automatic transport system) ○ Connectors: 2 SMA ○ Structure: Dual structure of wave absorber and stainless steel ○ Shielding performance: 60 dB or more @ 2.4 GHz ○ Reflection loss → 20 dB or more @ 1.2 GHz～ ● For more details, please download the catalog or contact us.

• others

ME8669 is a radio wave dark box compatible with low frequency bands (50-800 MHz) using ferrite-based radio wave absorbers. It is ideal for technical standard conformity tests, reception sensitivity tests, EMC tests, and more. For more details, please download the catalog or contact us. 【Features】 - Uses ferrite-based radio wave absorbers - Compatible with low frequency bands (50-800 MHz) - Suitable for technical standard conformity tests, reception sensitivity tests, EMC tests, etc. 【Specifications】 - External dimensions: 915 (W) × 650 (H) × 585 (D) mm (excluding protrusions) - Internal dimensions: 810 (W) × 506 (H) × 506 (D) mm - Weight: Approximately 165 kg - Structure: Double structure of ferrite-based radio wave absorber and stainless steel (hairline finish) - Shielding performance: 50 dB or more @ 300 MHz - Reflection loss: 20 dB or more @ 50 MHz to 800 MHz - Connectors: 2 SMA - I/F: D-sub 25 pin For more details, please download the catalog or contact us.

• others

MY5310/MY5410 is a radio wave dark box optimized for large/small EMI tests using ferrite-based radio wave absorbers. An ultra-compact, wideband antenna (30MHz to 3GHz) developed in-house is available as an option. By upgrading to the MR2300 system, EMI testing from 30MHz to 3GHz becomes possible. For more details, please download the catalog or contact us. 【Main Features】 - Uses ferrite-based radio wave absorbers - Suitable for large/small EMI tests - Optionally available ultra-compact, wideband antenna (30MHz to 3GHz) developed in-house - Upgrading to the MR2300 system enables EMI testing from 30MHz to 3GHz 【Other Features】 - MY5310 → For large-sized EMI tests → Standard equipped with a turntable with a diameter of 220mm and a load capacity of 10kg for small EUTs - MY5410 → For extra-large-sized EMI tests → Standard equipped with a turntable with a diameter of 756mm and a load capacity of 100kg for large EUTs ● For more details, please download the catalog or contact us.

• others

The MY5310S is a two-part assembly type of the large electromagnetic shield box "MY5310." It maintains shielding performance while allowing for division and assembly. It is ideal for transport via passenger elevators and installation in narrow spaces such as office buildings. For more details, please download the catalog or contact us. 【Main Features】 - Two-part assembly type of the large electromagnetic shield box "MY5310" - Maintains shielding performance while allowing for division and assembly - Suitable for transport via passenger elevators and installation in narrow spaces such as office buildings 【Other Features】 - The ability to transport in parts makes installation in office buildings easier - Can be transported using a standard 11-person elevator common in office buildings - Division and assembly can be done without specialized tools or expertise - Flexible response for relocating the equipment ● For more details, please download the catalog or contact us.

• others

MY5305 is a compact radio wave anechoic chamber designed for low-frequency measurements and EMC testing. The turntable is an optional feature. The radio wave absorber is made of ferrite, making it compact and space-saving. It supports a wide range of applications, including wireless LAN and one-segment broadcasting. It is ideal for technical standard conformity tests, reception sensitivity tests, and EMC tests. For more details, please download the catalog or contact us.

• others

The MAT850 is easy to operate. It is a compact and lightweight step attenuator that allows you to switch the attenuation of microwave electrical signals while confirming it with an LED display. You can manually adjust the current attenuation in 0.1 dB increments. It is ideal for evaluating call quality in mobile phones, WiMAX, PHS, etc., as well as wireless LANs and communication devices. For more details, please download the catalog or contact us. 【Main Features】 - Compact and easy to operate - Attenuation of microwave electrical signals can be switched while confirming with an LED display - Manual adjustment in 0.1 dB increments while checking the current attenuation 【Other Features】 - Wide frequency range from 300 MHz to 6.1 GHz - Minimum step of 0.1 dB for attenuation settings, maximum attenuation of 60.0 dB - Equipped with a spike noise removal circuit during attenuation switching - Easy-to-read LED display ● For more details, please download the catalog or contact us.

• others

This is an announcement of the "Wireless Evaluation Equipment Comprehensive Catalog" from Micronics Corporation. Micronics provides measurement instruments and high-frequency related equipment to the world. Here is the announcement of Micronics' "Wireless Evaluation Equipment Comprehensive Catalog." ■□■Contents■□■ ■Spectrum Analyzers / Signal Analyzers ■EMC Test Systems ■Anechoic Chambers / Shielded Boxes ■ETC / DSRC Test Systems ■Variable Attenuators ■Signal Generators ■Test Accessories You can view the catalog by clicking the download button. For more details, please contact us through the document request.

• others

By isolating wireless terminals and modules from unnecessary radio waves in the surrounding area and creating a radio wave anechoic environment, it becomes possible to evaluate the wireless systems of the evaluation terminals.

• others

If you have any questions regarding the introduction below, please feel free to contact us. ◆◇◆Features◆◇◆ Spectrum measurements can be made over a wide bandwidth supporting 50 kHz to 3.3 GHz. Errors due to ghost (reflected wave) interference have been reported in medium field areas around urban centers. Even if the digital broadcast terminal level is between 40 to 50 dB, there may be instances where the tuner cannot receive the signal or block noise occurs. In such cases, it is necessary to implement countermeasures after confirming not only the general BER/MER but also the ripple drop intervals. By setting the span to 10 MHz during measurement and checking the C/N ratio, we can further narrow down the analysis and identify the points of interference based on the spectrum state during reception. Additionally, by using the full span function, it is possible to display the wideband spectrum from 50 kHz to 3.3 GHz on the same screen. This tool is optimal for identifying which frequency bands are experiencing multipath interference or if distortion is occurring due to booster interference.

• others

This is a notice from Micronics Corporation regarding the "Next Generation High-Speed Wireless Evaluation Solution (Application Document)." A system for conducting communication quality and characteristic evaluation tests for next-generation high-speed wireless (such as LTE and WiMAX). ■□■ Solution ■□■ ■ Handover Characteristic Evaluation Objective: To determine the relationship between the received signal level and the handover occurrence point. ■ Fallback Characteristic Evaluation Objective: To determine the relationship between the received signal level and the switching point of effective throughput. ■ Reception Characteristic Evaluation Objective: To assess the strength of secondary emitted radio waves, etc. ■ For other functions and details, please download the catalog or contact us.

• others

Unlike conventional mechanical attenuators, this is optimal for linear wireless evaluation (such as distance attenuation and handover) without chattering or spikes during attenuator switching. Frequency correction is divided into 16 segments to achieve a flat frequency response within the band.

• others

This is an announcement from Micronics Corporation regarding the "WiMAX Evaluation Solution (Application Materials)." A system for conducting various characteristic evaluation tests for WiMAX (2.5GHz band) products. ■□■Solution■□■ ■Handover characteristic evaluation ■Fallback characteristic evaluation ■Reception characteristic evaluation For more details, please download the catalog or contact us.

• others

This is a notice from Micronics Corporation regarding the "Wireless LAN Measurement Solution (Application Materials)."

• others

This is a notice from Micronics Corporation regarding the "Wi-Fi Evaluation Solution (Application Materials)." A system for conducting various characteristic evaluation tests for Wi-Fi (2.4GHz and 5GHz) products. ■□■ [Solution ■□■ ■ Handover characteristic evaluation ■ Fallback characteristic evaluation ■ Reception characteristic evaluation ■ For more details, please download the catalog or contact us.

• others

By creating an environment that minimizes unnecessary radio waves around the development and production sites, it becomes possible to evaluate the wireless systems of mobile phone devices. ■□■Solution■□■ ■Protocol (Layer 1-3) testing via air connection - Set up an environment for bidirectional connection using a radio simulator and devices installed inside a radio anechoic chamber, with transmitting and receiving antennas mounted inside the chamber. - Conduct various protocol (Layer 1-3) tests using the radio simulator. ■Transmission characteristic testing of wireless communication devices via air connection - Receive radio waves emitted from devices placed on a turntable with a receiving antenna installed at the opposite position, and output them outside the radio anechoic chamber. - By connecting a spectrum analyzer or power meter to the input/output terminals, evaluation of each test item for the transmission characteristics of the radio device can be performed. ■For other functions and details, please download the catalog or contact us.

• others

This is a notice from Micronics Corporation regarding the "Conducted EMI Measurement System (Application Document)." A system that enables easy and cost-effective conducted EMI measurements using an EMI spectrum analyzer. ■□■ Solution ■□■ ■ EMI Spectrum Analyzer / MSA438E - Equipped with the necessary functions for conducting EMI tests (QP, average detection, and RBW: 9kHz, 120kHz [6dB]), making it ideal for EMI measurements. - As a preliminary test for EMI testing, it can reduce the amount of countermeasures required and the number of times the measurement site is used, significantly lowering running costs. ■ Dedicated EMI Measurement Software / MAS430 - When used, it allows you to specify the standards you want to measure, such as CISPR11, 22, EN55011, 22, FCC Part 15, VCCI, etc., and automatically sets the necessary parameters like bandwidth and threshold level. For other functions and details, please download the catalog or contact us.

• others

Using a handy spectrum analyzer, you can measure areas with digital terrestrial television signal interference and implement countermeasures against wireless device interference.

• others

Isolating the wireless LAN terminal from unnecessary surrounding radio waves and creating a radio anechoic environment enables the evaluation of the terminal's wireless system. Evaluation of the wireless system of wireless LAN terminals By isolating the wireless LAN terminal from unnecessary surrounding radio waves and creating a radio anechoic environment, the evaluation of the terminal's wireless system becomes possible. ■□■ Solution ■□■ ■ Transmission characteristic testing of wireless LAN terminals via air connection - The radio waves emitted from the W-LAN module installed on a turntable are received by a receiving antenna mounted at the opposite position and output outside the radio anechoic chamber. - By connecting measurement instruments such as a spectrum analyzer, the evaluation of each test item for the terminal's transmission characteristics can be conducted. ■ Reception characteristic testing of wireless LAN terminals via air connection - Signals from the terminal are transmitted from the transmitting antenna through a programmable attenuator, and the baseband signal extracted from the W-LAN module is measured. - By connecting measurement instruments such as a BER (Bit Error Rate) meter, spectrum analyzer, or power meter, measurements of reception sensitivity and reception level can be conducted. ■ For other functions and details, please download the catalog or contact us.

• others

By creating an environment that minimizes unnecessary radio waves around the development and production sites, it becomes possible to evaluate the wireless systems of wireless LAN devices. Evaluation of wireless LAN devices 【4×4 MIMO - Multiple Input Multiple Output】 By creating an environment that minimizes unnecessary radio waves around the development and production sites, it becomes possible to evaluate the wireless systems of wireless LAN devices. ■□■Features■□■ ■Radio Shielding Box MY5220 - A radio shielding box with high shielding performance. An optimal structure for manual work with a large opening. - Shielding performance of 70dB or more @2.4GHz, 5GHz - Reflection loss of 20dB or more @2.4GHz ■Programmable Attenuator MAT800/D - Ideal for handover tests and dynamic tests of wireless communication devices. - No instantaneous switching spikes occur, preventing communication errors. - Frequency range of 1.95 to 5.85GHz - VSWR 1.6≧ @2.6 to 5.2GHz / 2.1≧ @1.95 to 5.85GHz - Maximum attenuation of 80dB - Maximum input of 100mW ■For other functions and details, please download the catalog or contact us.

• others

This is an announcement from Micronics Corporation regarding the "Wireless Terminal Evaluation Solution (Application Materials)." By creating an environment that minimizes unnecessary radio waves around development and production sites, this solution enables the evaluation of wireless systems for wireless terminals. ■□■ Solution ■□■ ■ Protocol (Layer 1-3) Testing via Air Connection - An environment is set up for bidirectional connection using a radio simulator/SG and terminals installed inside a radio anechoic chamber, with transmitting and receiving antennas mounted inside the chamber. - Each protocol (Layer 1-3) test is conducted using the radio simulator. ■ Transmission Characteristics Testing of Wireless Communication Devices via Air Connection - Radio waves emitted from terminals placed on a turntable are received by a receiving antenna installed at the opposite position and output outside the radio anechoic chamber. - By connecting a spectrum analyzer or power meter to the input/output terminals, evaluations of various test items for the transmission characteristics on the radio device side can be conducted. ■ For more details, please download the catalog or contact us.

• others

Used for checking and maintaining retransmission signals and terminal-side reception levels, as well as measuring upstream signal interference noise on the internet, etc.

• others

This is an EMS (radiated immunity) test device that evaluates whether the EUT (equipment under test) will malfunction due to surrounding electromagnetic waves.

• others

It has a three-layer structure of a radio wave absorber, copper plate, and aluminum plate, covering a frequency range from low frequencies up to 18 GHz. It is a simple type of radio wave dark box that can be used on a tabletop. Additionally, an acrylic platform for placing the DUT is installed, and it is designed to easily accommodate an optional receiving antenna.

• others

This is a notice from Micronics Corporation regarding the "EMI Measurement Spectrum Analyzer (Specan) MSA438E."

• others

The "Taurus series" is a radio wave chamber that allows for the easy creation of evaluation environments for wireless testing of information communication devices such as WLAN, mobile phones, WiMAX, and RFID.

• others

New series for "Taurus." Offered at an even lower price. Low price, lightweight, short delivery time! Three models that meet diverse needs. The "Taurus-N series" is a shield box that allows for easy creation of evaluation environments for wireless devices such as mobile phones and wireless LAN. It consists of three models that achieve lower prices by eliminating the radio wave absorbers found in the existing "Taurus series." With a detachable and interchangeable I/F module, it supports a wide range of interfaces including USB, LAN, and AC power. Shielding performance is over 50dB for all models. [Lineup] ■ The cheapest ultra-lightweight and compact type Internal dimensions: 375×375×160mm, Weight: 1.9kg Standard price: 159,000 yen ■ Very excellent workability with a front opening Internal dimensions: 515×515×515mm, Weight: 12.3kg Standard price: 348,000 yen ■ Large size and low price type Internal dimensions: 1115×615×615mm, Weight: 42kg Standard price: 770,000 yen *Please refer to the catalog for detailed specifications.

• others