日本製造 List of Products and Services

At FA Systems Co., Ltd., part of our business group, we comprehensively consider customer requests, ease of use, performance, environmental resistance, rigidity, cost, energy efficiency, and weight, while our mechanical, electrical, and control staff work closely together in design and manufacturing. We have a track record of delivering various devices, including fully automated inspection systems for all-in-one inspection equipment installed on customer production lines, table-sized sampling test equipment, and systems that handle the "supply → inspection → storage" of parts, catering to both factories and research institutions. Additionally, by conducting integrated production from product planning to delivery and installation, we can reduce procurement and quality control tasks, as well as enable immediate responses in the event of defects. **Strengths of FA Systems** - Comprehensive support for all production processes, including product planning, equipment design, and electrical assembly. - Capability for user interface and inspection calculations using computers. *For more details, please feel free to contact us.*

We would like to introduce the roll measuring device developed by our business group, FA Systems Co., Ltd. This device inspects the surface condition and outer diameter while rotating the roll at high speed, and it can be operated intuitively with easy-to-understand buttons and levers. By measuring while correcting the parallelism between the slider and the workpiece, it can absorb measurement errors caused by waviness on parallel surfaces. 【Product Overview (Partial)】 ■ Control ・PLC (Keyence KV-5000) ・Computer (Dedicated roll measurement software created by our company) ■ Sensor: Keyence Laser Displacement Sensor LK-H ■ Measurement Accuracy: 10μm～ *For more details, please feel free to contact us.

We would like to introduce the 3D displacement measurement device developed by our business group, FA Systems Co., Ltd. This device can accommodate various measurements by replacing the sensors mounted on the XY two-axis orthogonal slider, and it features an intuitive and easy-to-understand user interface. Additionally, high-precision positioning is possible thanks to the linear guide and ball screw. 【Product Overview (Partial)】 ■ Control ・PLC (Keyence KV-N32T) ・Computer (Dedicated 3D displacement measurement software created by our company) ■ Sensor: Keyence Laser Displacement Sensor LK-H ■ Measurement Accuracy: XY stage positioning from 10μm, Z direction 10μm～ *For more details, please feel free to contact us.

We would like to introduce the work surface shape measurement device developed by our business group, FA Systems Co., Ltd. This device can measure the shape of work surfaces with high precision and is equipped with a function to verify the sensor's accuracy using a ceramic block gauge. By replacing the sensor mounted on the XY two-axis orthogonal slider, it can accommodate various measurements. 【Product Overview (Partial)】 ■ Control ・PLC (Keyence KV-N32T) ・Computer (Dedicated 3D displacement measurement software created by our company) ■ Sensor: Keyence Laser Displacement Sensor LJ-V ■ Measurement Accuracy: 2μm～ *For more details, please feel free to contact us.

We would like to introduce the image inspection device developed by our business group, FA Systems Co., Ltd. This device captures and inspects workpieces moving on a conveyor, automatically ejecting those that are deemed defective. It uses image sensors to authenticate multiple registered characters, sorting them into acceptable and defective products, thereby preventing the mixing of similar but different items. To address the unstable posture of the workpieces, the conveyor is automatically tilted based on registered information, eliminating character blur during imaging. 【Product Overview】 ■ Control ・ PLC (Keyence KV-N32T) ・ Computer (Custom 3D displacement measurement software developed by our company) ■ Sensor: Keyence Image Sensor CV-X ■ Equipment Used: IAI Electric Cylinder, Okura Transport Conveyor ■ Recording Method: CSV File *For more details, please feel free to contact us.

Introducing the A Series hydraulic press, model A-3, suitable for pressing, bending, and drawing operations. It is easy to integrate into automatic and dedicated machines. When you release the two-hand push button switch, the ram stops immediately, ensuring safety. Please contact us if you have any inquiries. 【Specifications (partial)】 ■ Pressing capacity: 29.4KN (0.6 tons to 3 tons) ■ Maximum pressure: 10MPa ■ Stroke length: 125mm ■ Open height: 225mm ■ Shank dimensions: φ25×50Lmm *For more details, please feel free to contact us.

The A-5 is a hydraulic press with a large oil volume and minimal oil temperature rise. It features variable stroke length and pressing capacity, and also adopts a two-speed feeding system. The shank dimensions are φ32×60L. Please contact us if you have any requests. 【Specifications (partial)】 ■ Pressing capacity: 49KN (1.5 tons to 5 tons) ■ Maximum pressure: 10MPa ■ Stroke length: 150mm ■ Open height: 250mm ■ Shank dimensions: φ32×60L *For more details, please download the PDF or feel free to contact us.

The A-10 is a hydraulic press that achieves safe and reliable control circuits. It features a double rod design that eliminates rod tilt, and it also employs a two-speed feed system for both high and low speeds. The shank dimensions are φ32×60L. Please contact us if you have any inquiries. 【Specifications (partial)】 ■ Pressing capacity: 98KN (3 tons to 10 tons) ■ Maximum pressure: 15.5MPa ■ Stroke length: 150mm ■ Open height: 250mm ■ Shank dimensions: φ32×60L *For more details, please download the PDF or feel free to contact us.

The "AP-5 model" is a high-precision hydraulic press with a post guide design that addresses the common issue of vibration in standard hydraulic presses. It is equipped with two post guides and a ram plate. We also offer the "AP-10 model," which has a pressing capacity of up to 10 tons. 【Specifications (partial)】 ■ Pressing capacity: 49KN (1.5 tons to 5 tons) ■ Maximum pressure: 10MPa ■ Stroke length: 150mm ■ Open height: 160mm ■ Shank dimensions: φ32×60Lmm *For more details, please feel free to contact us.

The B-80 is an air clutch type press machine with a robust box-shaped frame structure. It is a press machine that applies structural standards with an air clutch, capable of synchronized operation with front and rear devices. It can be docked with unwinding and rewinding devices. A touch panel controller is also available. Please contact us if you have any requests. 【Features】 ■ Robust box-shaped frame structure ■ Dual-bearing structure crank type press machine ■ High-precision press machine with minimal distortion due to the use of a cast frame ■ Bed surface finished with a planing process ■ High-precision, high-quality press machine *For more details, please download the PDF or feel free to contact us.

The "B-55" is an air clutch type press machine capable of synchronous operation with front and rear devices. By adopting a cast iron frame, it has become a high-precision press machine with minimal distortion, allowing for synchronous operation with front and rear devices. It features a robust box-type frame structure. Please contact us if you have any inquiries. 【Features】 ■ Robust box-type frame structure ■ Dual-bearing structure crank-type press machine ■ High-precision press machine with minimal distortion due to the cast iron frame ■ Bed surface finished with a scraping process ■ High-precision, high-quality press machine *For more details, please download the PDF or feel free to contact us.

The "B-35" is an NC feeding device, front and rear equipment, and molding machine that can dock with a winding/unwinding device. It features a dual-bearing structure crank press machine with a cast iron frame. The bed surface is finished with a planing process. It is also capable of synchronized operation with front and rear devices. Please contact us if you have any requests. 【Features】 ■ Robust box-type frame structure ■ Dual-bearing structure crank press machine ■ High-precision press machine with minimal distortion due to the use of a cast iron frame ■ Bed surface finished with planing ■ High-precision, high-quality press machine *For more details, please download the PDF or feel free to contact us.

Introducing the air clutch type press machine 'B-55' equipped with a touch panel controller. With external connections, it can detect abnormalities such as auto start/auto stop, misfeed, feed errors, bottom dead center anomalies, material stretching, and material sagging, and it will stop the press in an emergency. The abnormalities are displayed on the touch panel and can be saved as a history. The controller is designed with consideration for the operator, making setup changes easy. Additionally, cam adjustments for stop positions due to SPM changes are not required. 【Features】 ■ Can be linked with NC feeding devices ■ Easy setup changes with a controller designed for operator convenience ■ Three counters (total counter, preset counter, cumulative counter) ■ Equipped with a cumulative counter for mold maintenance (1 count for every 100 counts) ■ Energy-saving motor OFF feature (1 to 999 seconds) *For more details, please download the PDF or feel free to contact us.

The "BR-35/BR-55/BR-80" is a rotary table press that employs a roller gear index to achieve low noise, high speed, and high precision. It allows for easy installation of supply units, extraction units, and more, making it suitable for use as a dedicated machine. Developed as a rotary table for presses, it is a high-precision index machine with minimal deflection under load. 【Common Specifications (Partial)】 ■ Stroke Length: 30mm ■ Slide Adjustment Amount: 20mm ■ Table Diameter: φ470 ■ P.C.D: φ350 ■ Number of Divisions: 4, 6, 8, 12 *For more details, please download the PDF or feel free to contact us.

We would like to introduce our CB NSC series model 'NSC-06'. This is a small press with a cast iron frame and a bed separation type, which can be integrated into automatic machines and dedicated machines. The bed dimensions are 190×115mm. Please contact us if you have any inquiries. 【Specifications (partial)】 ■ Capacity: 5.8KN (600Kg) ■ Stroke length: 20mm ■ Stroke rate: 200spm ■ Die height: 110mm ■ Slide area: 70×46mm ■ Slide adjustment amount: 15mm *For more details, please download the PDF or feel free to contact us.

The "CB-1" is an air clutch type press machine that can dock with NC feeding devices, front and rear equipment, molding machines, and unwinding and rewinding devices. The controller uses a programmable controller. It can also accommodate special electrical specifications. We can also produce touch panel display controllers, so please feel free to inquire. 【Features】 ■ Air clutch adopted, press machine compliant with structural standards ■ Synchronous operation possible with front and rear devices ■ Touch panel controller available ■ Can dock with NC feeding devices, front and rear equipment, molding machines, and unwinding and rewinding devices ■ Die height adjustable *For more details, please download the PDF or feel free to contact us.

The "CB-1G" is an air clutch type press machine that uses a programmable controller. It supports special electrical specifications and can be docked with NC feeding devices, front and rear equipment, molding machines, and unwinding and rewinding devices. Additionally, die height changes are possible. Please contact us if you have any requests. 【Features】 ■ Air clutch adopted, compliant with structural standards ■ Synchronous operation possible with front and rear devices ■ Uses a programmable controller ■ Touch panel controller available ■ Capable of accommodating special electrical specifications *For more details, please download the PDF or feel free to contact us.

The "CB-3/CBL-3 type" is a low-speed air clutch press machine that features a cast iron frame with minimal distortion. It is a press that conforms to structural standards with an air clutch, capable of synchronized operation with front and rear devices, and also supports a touch panel controller. Additionally, it can be docked with NC feeding devices, front and rear equipment, molding machines, and unwinding and rewinding devices. 【Features】 ■ High-precision press machine with a cast iron frame that minimizes distortion ■ High-precision, high-quality press machine with a bed surface finished by scraping ■ Press that conforms to structural standards with an air clutch ■ Capable of synchronized operation with front and rear devices ■ Touch panel controller is also available ■ Capable of docking with NC feeding devices, front and rear equipment, molding machines, and unwinding and rewinding devices *For more details, please download the PDF or feel free to contact us.

We would like to introduce our rotary table press, 'NSCR-06/CBR-1/CBR-3'. By adopting a roller gear index, it achieves low noise, high speed, and high precision. Developed as a rotary table for presses, it is a high-precision indexing machine with minimal deflection under load. Please feel free to contact us if you have any inquiries. 【Features】 ■ Adopts a roller gear index, achieving low noise, high speed, and high precision ■ Base machine that allows easy installation of supply units, extraction units, etc., enabling use as a dedicated machine ■ Developed as a rotary table for presses, it is a high-precision indexing machine with minimal deflection under load *For more details, please download the PDF or feel free to contact us.

The "H-1" is a hand press suitable for precise pressing, grommeting, and crimping. It uses bearings and metal in the rotating parts and is equipped with a ram stop mechanism. The handle can be attached on either side and its length can also be adjusted. Additionally, the frame is made of aluminum, making it lightweight. Please feel free to contact us when you need assistance. 【Features】 - Open height and stroke can be freely set - Bearings and metal are used in the rotating parts - Equipped with a ram stop mechanism - Handle can be attached on either side and length can be adjusted - Lightweight due to aluminum frame *For more details, please download the PDF or feel free to contact us.

The "H-1L" is a hand press suitable for precise pressing, grommeting, and riveting. By incorporating a ratchet mechanism, it reduces processing errors, and with the addition of a load cell, load management can be performed. Additionally, it can be customized to meet customer requests, such as with a slide table or an index table. Please feel free to consult us. 【Features】 ■ Open height and stroke can be freely set ■ Bearings and metal are used in the rotating parts ■ Equipped with a ram stop mechanism ■ Handle can be mounted on either side and length adjusted ■ Lightweight due to the aluminum frame *For more details, please download the PDF or feel free to contact us.

The "T-1" is a hand press suitable for bending, crimping, pressing, and stamping processes that require power. By attaching a load cell, it enables a reduction in operational errors and load management. It can be customized to meet customer requests, such as with a sliding table or indexing table. Please feel free to consult us when placing an order. 【Features】 ■ Precise work is possible with the ability to set the bottom dead center ■ Toggle mechanism adopted to generate a large force with a small effort ■ Sliding parts made of metal ■ Equipped with a ram stop mechanism ■ Handle can be mounted on either side *For more details, please download the PDF or feel free to contact us.

The "T-2" is a hand press suitable for bending, crimping, pressing, and stamping processes that require power. It employs a toggle mechanism that generates a large force with a small effort. It allows for precise work with a settable bottom dead center, and the handle can be mounted on either side. Additionally, it can be customized with features such as a sliding table or an indexing table. Please feel free to contact us for inquiries. 【Features】 ■ Allows for precise work with a settable bottom dead center ■ Employs a toggle mechanism that generates a large force with a small effort ■ Sliding parts are made of metal ■ Equipped with a ram locking mechanism ■ Handle can be mounted on either side *For more details, please download the PDF or feel free to contact us.

The "T-3" is a hand press suitable for bending, crimping, pressing, and stamping processes that require power. It comes with a ram locking mechanism, a sliding table, and an indexing table, allowing for special adaptations to meet customer requests. Additionally, by attaching a load cell, it is possible to reduce operational errors and manage load effectively. Please feel free to contact us when you need assistance. 【Features】 ■ Precise work is possible with adjustable bottom dead center setting ■ Toggle mechanism that delivers high force with minimal effort ■ Sliding parts made of metal ■ Equipped with a ram locking mechanism ■ Handle can be mounted on either side *For more details, please download the PDF or feel free to contact us.

We would like to introduce the "Ratchet Hand Press" that we handle. By adopting a ratchet mechanism, it allows for quality control. The handle cannot be returned until it reaches the set bottom dead center, preventing operational mistakes. Please feel free to contact us when you need assistance. 【Features】 ■ Prevents operational mistakes as the handle cannot be returned until it reaches the set bottom dead center ■ Enables quality control through the adoption of a ratchet mechanism *For more details, please download the PDF or feel free to contact us.

The "M-1" is an ultra-lightweight riveting machine that uses an aluminum frame. It is equipped with a controller, counter, bottom dead point limit, and pressure timer, allowing for free setting of open height and stroke. Additionally, it can be customized with features such as a slide table and index table. Please feel free to contact us for inquiries. 【Features】 ■ Ultra-lightweight riveting machine with an aluminum frame ■ Free setting of open height and stroke ■ Built-in controller, counter, bottom dead point limit, and pressure timer ■ Bottom dead point stopper with dual lot cylinders ■ Safe single-step operation ■ Customizable options such as slide table and index table *For more details, please download the PDF or feel free to contact us.

The M-2 is an ultra-lightweight riveting machine that uses an aluminum frame. It can be customized with features such as a slide table and an indexing table. It has a dual-lot cylinder with a bottom dead center stopper, and the process is a single safe operation. Additionally, the open height and stroke can be freely set. Please feel free to contact us for inquiries. 【Features】 - Ultra-lightweight riveting machine with an aluminum frame - Open height and stroke can be freely set - Built-in controller, counter, bottom dead center limit, and pressure timer - Dual-lot cylinder with a bottom dead center stopper - Single safe operation - Customizable with features such as a slide table and an indexing table *For more details, please download the PDF or feel free to contact us.

The BD-5 is a high-quality press machine that excels in precision and durability. It has its drive unit stored at the bottom, accommodating a wide range of fields such as sheet metal and film processing. With connections to external equipment, it features built-in abnormal detection software for auto start/stop, misfeed, and feed errors. Please feel free to contact us when you need assistance. 【Features】 ■ High-quality press machine with excellent precision and durability ■ Drive unit stored at the bottom, suitable for a wide range of fields including sheet metal and film processing ■ Drive and rotating parts use bearing mechanisms, while the post section is made of metal ■ Bottom dead center setting adopts an electric adjustment method ■ Controller features a touch panel *For more details, please download the PDF or feel free to contact us.

We would like to introduce the IR-corrected 3-megapixel model 'MZ35X1428DPFIR-T' that we handle. The size is 128.6mm × 125.6mm × 278.3mm, and the weight is 4500g. The horizontal field of view is from 34° to 1.0°. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Image format: 2/3" ■ Focal length: 14.5-500mm ■ Aperture (F-number): F2.8 ■ Horizontal field of view: 34° to 1.0° ■ Mount: C *For more details, please download the PDF or feel free to contact us.

We would like to introduce our IR-corrected 2-megapixel model 'MZ38X4179DPFIR-T'. The image format is 2/3", and the focal length ranges from 41 to 1560mm. It has a C mount and offers a resolution of 2 megapixels. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Image format: 2/3" ■ Focal length: 41-1560mm ■ Aperture (F-number): F7.9 ■ Horizontal field of view: 11.6 to 0.34° ■ Mount: C *For more details, please download the PDF or feel free to contact us.

We would like to introduce the IR-corrected 2-megapixel model 'HZ50X1045DPFIR-T' that we handle. The image format is 1/1.8" (2/3" available as optional), and the focal length is 10-500mm with an aperture of F4.5. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Image format: 1/1.8" (2/3" available as optional) ■ Focal length: 10-500mm ■ Aperture (F-number): F4.5 ■ Horizontal field of view: 38.9° to 0.8° ■ Mount: C *For more details, please download the PDF or feel free to contact us.

We would like to introduce the 2 Megapixel 'HZ20X1225DPIR' with IR correction that we handle. The resolution is 2 Megapixels, with a horizontal field of view ranging from 29.16° to 1.56°, and the mount is C. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Image format: 1/2" ■ Focal length: 12-240mm ■ Aperture (F-value): F2.5 ■ Horizontal field of view: 29.16° to 1.56° ■ Mount: C *For more details, please download the PDF or feel free to contact us.

We would like to introduce our 4-megapixel varifocal lens, 'MSVF3.3X0315IR-BCDN-MD'. The image format is 1/2.7", and the focal length is 3-10mm. The size is φ29mm × 39.1mm, and the weight is 26.5g. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Image format: 1/2.7" ■ Focal length: 3-10mm ■ Aperture (F-number): F1.5 ■ Horizontal field of view: 118.4° to 35.2° ■ Mount: φ14 *For more details, please download the PDF or feel free to contact us.

We would like to introduce our 4-megapixel varifocal lens, 'MSVF3.3X0315IR-BCPN-MD'. The aperture is F1.5, with a horizontal field of view ranging from 118.4° to 35.2°, and the mount is φ14. This product offers a resolution of 4 megapixels. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Image format: 1/2.7" ■ Focal length: 3-10mm ■ Aperture (F-number): F1.5 ■ Horizontal field of view: 118.4° to 35.2° ■ Mount: φ14 *For more details, please download the PDF or feel free to contact us.

We would like to introduce our 3-megapixel varifocal lens, 'MSVF3X3313IR3-BCDN'. The size is φ29mm × 37.9mm, and it weighs 24g. The horizontal field of view ranges from 104.8° to 34.8°. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Image format: 1/2.7" ■ Focal length: 3.3-10mm ■ Aperture (F-value): F1.3 ■ Horizontal field of view: 104.8° to 34.8° ■ Mount: φ14 *For more details, please download the PDF or feel free to contact us.

We would like to introduce our 3-megapixel varifocal lens 'MSVF3X3313IR3-BCDN-MD'. The horizontal field of view is 104.8° to 34.8°, the image format is 1/2.7", and the focal length is 3.3-10mm. Please feel free to contact us for inquiries. 【Specifications (partial)】 ■ Image format: 1/2.7" ■ Focal length: 3.3-10mm ■ Aperture (F-number): F1.3 ■ Horizontal field of view: 104.8° to 34.8° ■ Mount: φ14 *For more details, please download the PDF or feel free to contact us.

We would like to introduce our 3-megapixel varifocal lens, 'MSVF3X3313IR3-BCPN'. The mount is φ14, with a resolution of 3 megapixels. The horizontal field of view ranges from 104.8° to 34.8°, and the aperture is F1.3. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Image format: 1/2.7" ■ Focal length: 3.3-10mm ■ Aperture (F value): F1.3 ■ Horizontal field of view: 104.8° to 34.8° ■ Mount: φ14 *For more details, please download the PDF or feel free to contact us.

We would like to introduce our 3-megapixel varifocal lens, 'MSVF3X3313IR3-BCPN-MD'. The resolution is 3 Mega Pixels with an image format of 1/2.7". It has a horizontal angle of view of 104.8° to 34.8°, and a focal length of 3.3-10mm. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Image format: 1/2.7" ■ Focal length: 3.3-10mm ■ Aperture (F-value): F1.3 ■ Horizontal angle of view: 104.8° to 34.8° ■ Mount: φ14 *For more details, please download the PDF or feel free to contact us.

We would like to introduce our 3-megapixel varifocal lens, the 'MTV3X2812D'. The image format is 1/3", with a focal length of 2.8-9mm and an aperture of F1.2. The size of the product is φ36.5mm × 48.7mm. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Image format: 1/3" ■ Focal length: 2.8-9mm ■ Aperture (F-value): F1.2 ■ Horizontal field of view: 107.4° to 34.5° ■ Mount: CS *For more details, please download the PDF or feel free to contact us.

We would like to introduce our 3-megapixel varifocal lens, the 'MTV3X2812S'. The horizontal field of view ranges from 107.4° to 34.5°, and it has a CS mount. The weight is 55g, and the resolution is 3 Megapixels. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Image format: 1/3" ■ Focal length: 2.8-9mm ■ Aperture (F-value): F1.2 ■ Horizontal field of view: 107.4° to 34.5° ■ Mount: CS *For more details, please download the PDF or feel free to contact us.

We would like to introduce our 3-megapixel varifocal lens, the 'MSV3X3113D'. The focal length is 3.1-9mm, and the image format is 1/2.7". It has a CS mount and a horizontal field of view of 111.4° to 38.6°. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Image format: 1/2.7" ■ Focal length: 3.1-9mm ■ Aperture (F-number): F1.3 ■ Horizontal field of view: 111.4° to 38.6° ■ Mount: CS *For more details, please download the PDF or feel free to contact us.

We would like to introduce our 3-megapixel varifocal lens, 'MSV3X3113S'. The operating temperature range is -10 to +50 °C, and the insulation resistance is over 1 MΩ. The basic step angle is 18°, and the excitation method is bipolar two-phase excitation. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Image format: 1/2.7" ■ Focal length: 3.1-9mm ■ Aperture (F-number): F1.3 ■ Horizontal field of view: 111.4° to 38.6° ■ Mount: CS *For more details, please download the PDF or feel free to contact us.

We would like to introduce our 2-megapixel varifocal lens 'MSV7X0716D'. The horizontal field of view is 41.3° to 6.0°, with a focal length of 7-50mm and an aperture of F1.6. The image format is 1/2.7". Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Image format: 1/2.7" ■ Focal length: 7-50mm ■ Aperture (F-number): F1.6 ■ Horizontal field of view: 41.3° to 6.0° ■ Mount: CS *For more details, please download the PDF or feel free to contact us.

We would like to introduce our 2-megapixel varifocal lens 'MSV7X0716S'. The motor type is a PM type stepping motor. The operating voltage range is 3V to 5V, with a coil resistance of 48Ω (±10% per phase). Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Image format: 1/2.7" ■ Focal length: 7-50mm ■ Aperture (F value): F1.6 ■ Horizontal angle of view: 41.3° to 6.0° ■ Mount: CS *For more details, please download the PDF or feel free to contact us.

We would like to introduce our 5-megapixel fisheye lens, the 'HFE1414C'. The size is φ43mm × 53.1mm and it weighs 116g. The resolution is 5 Mega Pixels, with a horizontal angle of view of 185°. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Image format: 1/2.3" ■ Focal length: 1.4mm ■ Aperture (F-number): F1.4 ■ Horizontal angle of view: 185° ■ Mount: C *For more details, please download the PDF or feel free to contact us.