セキュリティハウス List of Products and Services

■Features ●Please use in conjunction with our "Wireless Distribution Outlet." ●Prevents tripping and disconnection caused by cords. ●Includes a "Low Battery Alert Function" to notify you when battery levels are low. ●Includes a "Regular Transmission Function" to check signal reception status.

• Security Sensor Systems
• Security devices

■Features ● Our various sensors notify you wirelessly in conjunction with the nurse call system. ● A wireless receiving function has been integrated into the distribution outlet. ● The wiring from the wall-mounted nurse call sub-unit to the sensor has been made wireless, reducing the risk of disconnection failures due to bed movement. ● The radio wave reach distance is approximately 3 meters in a clear line of sight. ■Safety Functions ● [Low Battery Notification] You can know in advance when the transmitter's battery is low. ● [Regular Transmission Function] You can feel secure knowing the radio wave reception status. ● [Temporary Stop Function] Prevents forgetting to turn on the switch, providing peace of mind.

• Security Sensor Systems
• Security devices

■Features ● Our various sensors notify you wirelessly in conjunction with the nurse call system. ● The wireless receiver function has been integrated into the distribution outlet. ● The wiring from the wall-mounted nurse call subunit to the sensor has been made wireless, reducing the risk of disconnection due to bed movement. ● The radio wave reach distance is approximately 3 meters in line of sight. ■Safety Functions ● [Battery Low Notification] You can know in advance when the transmitter's battery is low. ● [Regular Transmission Function] You can feel secure knowing the radio wave reception status. ● [Temporary Stop Function] Prevents forgetting to turn on the switch, providing peace of mind.

• Security Sensor Systems
• Security devices

■Features ● Our various sensors notify you wirelessly in conjunction with the nurse call system. ● A wireless receiver function has been integrated into the distribution outlet. ● The wiring from the wall-mounted nurse call subunit to the sensor has been made wireless, reducing the risk of disconnection failures due to bed movement. ● The radio wave reach distance is approximately 3 meters in line of sight. ■Safety Features ● [Low Battery Alert] You can know in advance when the transmitter's battery is low. ● [Regular Transmission Function] You can feel assured knowing the radio wave reception status. ● [Temporary Pause Function] Prevents forgetting to turn on the switch, providing peace of mind.

• Security Sensor Systems
• Security devices

■Features ● Our various sensors notify you wirelessly in conjunction with the nurse call system. ● A wireless receiving function has been integrated into the distribution outlet. ● The wiring from the wall-mounted nurse call sub-unit to the sensor has been made wireless, reducing the risk of disconnection failures due to bed movement. ● The radio wave reach distance is approximately 3 meters in line of sight. ■Safety Functions ● [Battery Low Notification] You can know in advance when the transmitter's battery is low. ● [Regular Transmission Function] You can be assured of the radio wave reception status. ● [Temporary Stop Function] Prevents forgetting to turn on the switch, providing peace of mind.

• Security Sensor Systems
• Security devices

■Features ● Our various sensors notify you wirelessly in conjunction with the nurse call system. ● The wireless receiver function has been integrated into the distribution outlet. ● The wiring from the wall-mounted nurse call sub-unit to the sensor has been made wireless, reducing the risk of disconnection failures due to bed movement. ● The radio wave reach distance is approximately 3 meters in line of sight. Safety Features ● [Battery Depletion Notification] You can know in advance when the transmitter's battery is low. ● [Regular Transmission Function] You can feel secure knowing the radio wave reception status. ● [Temporary Stop Function] Prevents forgetting to turn on the switch, providing peace of mind.

• Security Sensor Systems
• Security devices

■Features ● Our various sensors notify you wirelessly in conjunction with the nurse call system. ● A wireless receiving function has been integrated into the distribution outlet. ● The wiring from the wall-mounted nurse call subunit to the sensor has been made wireless, reducing the risk of disconnection failures due to bed movement. ● The radio wave reach distance is approximately 3 meters in line of sight. ■Safety Features ● [Low Battery Notification] You can know in advance when the transmitter's battery is low. ● [Regular Transmission Function] You can feel assured knowing the radio wave reception status. ● [Temporary Stop Function] Prevents forgetting to turn on the switch, providing peace of mind.

• Security Sensor Systems
• Security devices

■Features ● Our various sensors notify you wirelessly in conjunction with the nurse call system. ● A wireless receiving function has been integrated into the distribution outlet. ● The wiring from the wall-mounted nurse call sub-unit to the sensor has been made wireless, reducing the risk of disconnection due to bed movement. ● The radio wave reach distance is approximately 3 meters in line of sight. ■Safety Features ● [Low Battery Notification] You can know in advance when the transmitter's battery is low. ● [Regular Transmission Function] You can feel secure knowing the radio wave reception status. ● [Temporary Stop Function] Prevents forgetting to turn on the switch, providing peace of mind.

• Security Sensor Systems
• Security devices

■Features ■Material is made of aluminum alloy. ■The paint color is white.

• Security cameras and surveillance systems

■Features ●Ceiling mount attachment ●Compatible models include color capsule cameras "VCC-C722," "VCC-C732V," super day/night capsule camera "VCC-IR982W," and dummy camera "VCC-D800." ●The installation hole diameter for embedding is the same as before, φ170 to φ176mm.

• Security cameras and surveillance systems

■Features ● Can control the Day-Night preset dome camera PTZ-910AH. ● One controller can control up to 255 PTZ-910AH cameras. ● Camera settings, preset positions, pattern mode, swing mode, and group mode can be set and executed from the controller.

• Security cameras and surveillance systems

■Adoption of EXview HAD CCD® and Digital Processing Method The digital color CCD camera achieves high-quality, high-sensitivity, and low-smear clear images through the adoption of EXView HAD CCD and digital signal processing (DSP). *EXView HAD CCD is a registered trademark of Sony Corporation. ■High-Resolution Camera By adopting a 380,000-pixel EXview CCD, it has achieved a high resolution with a horizontal resolution of 500 lines. ■Auto White Balance Function It is equipped with a white balance function that automatically tracks changes in light sources to consistently reproduce well-balanced images. Additionally, it features a one-push white balance function that allows for manual white balance settings according to the conditions of the monitoring location. ■Flickerless Function It includes a flickerless function that prevents screen flickering under fluorescent lights in regions with a power frequency of 50Hz. ■Backlight Compensation Function It is equipped with a backlight compensation function that automatically brightens the image according to the subject's condition, even in extremely bright backgrounds or backlit situations.

• Security cameras and surveillance systems

■Features By using it in combination with the HDMI conversion converter (VH-RV410), HDMI output signals from devices such as recorders can be converted to HD-SDI signals, allowing for extended wiring distances to display video on multiple monitors located far away. (Up to 70m when using 5C-FB)

• Security cameras and surveillance systems

■Features ● By using this device, you can display the video from a Full HD camera on an HDMI-compatible monitor without using an HD-SDI digital recorder (HDVR-404). ● It is equipped with a repeater function that allows you to extend the wiring distance from the camera. (You can connect up to 5 units, but each unit requires power supply from the included adapter.) ● It supports coaxial power overlay when used in combination with the HD-SDI converter (VH-DP100) and the HD-SDI power overlay unit (VH-VP200), so no power supply to this device is necessary. (You can connect up to 3 units.)

• Security cameras and surveillance systems

■Features ● By using a repeater, the wiring distance from the camera can be extended. ● By connecting a repeater (VH-RV300) to the combination of the HD-SDI converter (VH-DP100) and the HD-SDI power overlay unit (VH-VP200), the wiring distance can be extended.

• Security cameras and surveillance systems

■Features ●This is a dedicated option for EX-SDI and HD-SDI. ●It outputs the same video signal as the input for one input of either EX-SDI or HD-SDI, providing 4 outputs (4 distribution). ●An AC adapter (DC12V) is included.

• Security cameras and surveillance systems

Features ● Outputs 2 HD-SDI video signals (2-way distribution) from 1 HD-SDI video signal input. ● Comes with an AC adapter (DC12V).

• Security cameras and surveillance systems

■Features ● By using the HD-SDI converter (VH-DP100) and the HD-SDI power overlay unit (VH-VP200), you can transmit power and video signals for HD-SDI cameras with a DC12V power specification using a single coaxial cable. ● By connecting a repeater (VH-RV300), you can extend the wiring distance.

• Security cameras and surveillance systems

■Features ● Infrared lighting activates when powered by DC12V. ● Can be installed on outdoor or indoor ceilings and walls (compliant with IP66). ● The camera mounting bracket supports 3-axis movement.

• Security cameras and surveillance systems

■Features ● It can connect an analog camera to an HD-SDI digital recorder. ● By connecting an HD-SDI repeater (VH-RV300) or an HDMI conversion converter (VH-AD400), the wiring distance can be extended. *Note: Using this device will not convert the camera into an analog camera.

• Security cameras and surveillance systems

For more details, please refer to the basic information.

• Security Sensor Systems
• Security devices

■Detects pressure applied to the mat Place it beside the bed, and when a person gets off (or falls) from the bed, it detects the pressure applied to the detection unit and transmits a low-power radio signal. ■User-friendly design ● The transmitter and detection unit are integrated, making it easy to carry without tangled cords. ● The size of the detection unit is “400×800mm,” which is a standard size convenient for portability. * A series product "TX-M4512" (detection unit 450×1200mm) is also available. ● By pressing the pause timer switch, you can suspend the detection function for 5 minutes. You can extend the timer by reactivating it during this time. Use it when you do not want the detection to operate, such as during bed making or medical examinations. ● When the battery is low, it will flash the indicator light and send a low battery signal to notify you. ● The detection unit is a high-sensitivity, thin type with a thickness of 6mm, made from flexible material. ● The underside is made of non-slip material to prevent slipping on the floor. ● It has a simple waterproof structure.

• Security Sensor Systems
• Security devices

■Detects pressure on the mat By placing it beside the bed or at the entrance of the room, it is a sensor that detects a person's weight when they get out of bed (or fall) or when they attempt to leave the room. ■Features ● The transmitter and detection unit are integrated, making it portable without tangled cords. ● The detection unit size is a large "450×1200mm," effective in wide entrance areas. * A series product "TX-M48" (detection unit 400×800mm) is also available. ● By pressing the pause timer switch, the detection function can be paused for 5 minutes. It is possible to extend the timer duration by reactivating it during this time. Use this feature when you do not want the detection to operate, such as during bed making or medical examinations. ● When the battery is low, it alerts you with a blinking indicator light and sends a low battery signal. ● The detection unit is a high-sensitivity, thin type with a thickness of 6mm, made from flexible material. ● The underside uses non-slip material to prevent slipping from the floor. ● It has a simple waterproof structure.

• Security Sensor Systems
• Security devices

■Features ● By registering with the multifunctional emergency notification device [HEC-610], it can be used as a "talking wireless push button." (Maximum number of devices that can be registered: 8) By installing it in places where accidents are likely to occur, such as beside the bed, in the bathroom, or in the changing room, pressing the button in an emergency will initiate an emergency call, and once the call is answered, hands-free communication is possible. *Note: It does not have waterproof functionality. ● The radio range is approximately 20 meters in line of sight. ● The large button makes it easy for the elderly to operate. ● It has a built-in battery to ensure it can be used even during power outages or temporary power disconnections. (Continuous talk time during power outages: up to 5 hours) *Note: If you want to operate the notification function during a power outage, the main unit must also have a backup battery installed. (Continuous talk time for the main unit during a power outage is approximately 2 hours.)

• Security Sensor Systems
• Security devices

■Wide-area and high-density detection patterns Five-column areas, including just before the shutter, have been arranged, with each column featuring 12 high-density pattern areas (a total of 60). The installation height can be up to 6.5 meters, achieving a wide detection area. (Optical area: height 6.5m × width 6.9m × depth 4.2m) ■Direction discrimination function By setting the direction discrimination function, unnecessary opening and closing of the shutter can be reduced. The directionality can be selected from the following four patterns: 1. All-direction detection 2. No detection of lateral entry 3. No detection of exit from the shutter side 4. No detection of exit from both lateral and shutter sides ■Malfunction reduction function By using the new insect mode in conjunction with environmental countermeasures, malfunctions caused by environmental changes such as dirt on the ground, snow, and insects can be reduced. ■Shutterway function By using the separately sold wedge-shaped base (model number WD-6500), a detection area setting for the shutterway (negative side) can be established, enhancing safety.

• Security Sensor Systems
• Security devices

■Features ●This is a part that distributes one system of powered input to two systems of unpowered relay contact outputs. ●Unpowered relay contacts (c contacts x 2) ●Can be housed in controllers of C-603 or higher. ●10 pieces per box

• Security Sensor Systems
• Security devices

For more details, please refer to the basic information.

• Security cameras and surveillance systems

■Dual System Output It has a built-in dual system output and operates by verifying individual PIN codes, allowing a single unit to perform two types of control, such as setting/resetting mechanical security and opening/closing electric locks. ● Output 1: Output mode can be set ● Output 2: One-shot output ■ Four Output Modes Depending on the connected devices, four types of output modes can be set. ○ Latch Mode A mode where the contacts reverse with each PIN code verification. ○ One-shot Mode A mode that outputs contacts for approximately one second during PIN code verification. ○ Key Switch Mode A mode for remotely operating our controller. ○ Simultaneous Dual Output Mode A mode where both outputs are activated simultaneously during PIN code verification. In cases where unlocking is requested under duress, it will activate the unlocking output while also sending an alarm to the security panel, etc. * When using in Key Switch Mode, please set the remote switch LED setting on the controller side to "light up when unlocked." Alarm Buzzer If an incorrect PIN code is entered four times in a row, the built-in buzzer will sound, deterring tampering or unauthorized intruders.

• Security Sensor Systems
• Security devices

For more details, please refer to the basic information.

• Security Sensor Systems
• Emergency alarm system

■Features ● The user can start the life timer by pressing the reassurance switch. If there is no switch operation within the set time, it will be judged as abnormal and will output an alert. ● The setting time for the life timer can be selected from 15 patterns. ● The operating status is indicated by two colored display lights: red and green. ● The alert delay function (pre-notification function) notifies with display lights and a buzzer. ● It can be freely installed in various locations such as living rooms, changing rooms, medicine storage rooms, and freezers (one-person workspaces). ● There are no false activations due to the installation environment, as it does not connect to a motion sensor.

• Security Sensor Systems
• Security devices

■Features ●Radio wave reach distance: approximately 100m in line of sight ●One transmitter can control the "open, stop, close" three outputs of 99 registered receivers. ●Operation method: Channels can be switched by pressing the "send" and "return" buttons. After selecting the channel of the receiver you want to operate, use the "open, stop, close" buttons to control it. ●Ideal for wireless control in factories where multiple electric shutters need to be operated individually. ●Equipped with a safety lock switch on the side of the transmitter to prevent accidental operation. ●Up to 124 transmitters with different ID codes can be registered to the receiver.

• Security Sensor Systems
• Security devices

For more details, please refer to the basic information.

• Security Sensor Systems
• Security devices

Features ● Can split one RCA jack into two. It allows one input socket to be expanded into two inputs. (Usage example) Using a mat sensor and a push button together. ● Applicable products: BC series, HC-116

• Security Sensor Systems
• Security devices

■Main Features ● This is a compact dedicated DC power supply unit with an input of AC100V/200V and an output of DC24V 450mA. ● Its space-saving design (W76xH32xD28mm) makes it ideal for use in peripheral devices for automatic doors and security system equipment.

• Security Sensor Systems
• DC Power Supply

■Features ● By combining signals from sensors and programming, it is possible to build a system with this product alone for direction detection and contact distribution without using multiple units. (Programming costs are estimated separately) ● Power supply voltage: AC100V or DC24V ● Input: 6 points of no-voltage contacts, Output: 4 points of no-voltage contacts (2 points are common COM) ● Power supply for sensors: DC24V 500mA (when supplied with AC100V) ● It is possible to reuse PLC programs created in the past.

• Security Sensor Systems
• Security devices

■Triple mirror that forms a unique area Equipped with three sets of optical units in the sensor. This is a new type of passive sensor featuring twin-type elements (newly developed) in each unit. The area formed by the three sets of optical units significantly reduces missed alarms and false triggers due to its unique layout design. Additionally, the design resembles outdoor lighting, and the internal mirrors can be adjusted to modify the area, making it difficult to infer the direction of the area from its appearance, thus enhancing security. ■Reduction of false triggers caused by small animals By adopting independent detection units for each mirror, signal processing reduces false triggers caused by small animals such as cats. Furthermore, by installing a bird stopper on the top surface, it becomes difficult for birds to perch, significantly reducing unexpected false triggers. ■Compatible with installation heights of 2.0 to 6.0m! Since it can be installed at heights that are difficult for people to reach, it prevents vandalism against the sensor. Additionally, by using high-density mode, it can be installed at heights of up to 6m. (In high-density mode, cancellation of small animals is disabled.) ■High-density area using triple mirrors With a seamless high-density surveillance area, it enables comprehensive monitoring without gaps.

• Security Sensor Systems

■Triple mirror that forms a unique area Equipped with three sets of optical units in the sensor. This is a new type of passive sensor that features twin-type elements (newly developed) in each unit. The area formed by the three sets of optical units significantly reduces false alarms and malfunctions due to its unique layout design. Additionally, the design resembles outdoor lighting, and the internal mirrors can be adjusted to modify the area, making it difficult to infer the direction of the area from its appearance, thus enhancing security. ■Reduction of false alarms caused by small animals By adopting independent detection units for each mirror, signal processing reduces false alarms caused by small animals such as cats. Furthermore, by installing a bird stopper on the top surface, it becomes difficult for birds to perch, significantly reducing unexpected false alarms. ■Supports installation heights of 2.0 to 6.0 meters! Since it can be installed at heights that are difficult for people to reach, it prevents vandalism against the sensor. Additionally, by using high-density mode, it can be installed at heights of up to 6 meters. (In high-density mode, cancellation of small animals is disabled.) ■High-density area using triple mirrors With a seamless high-density surveillance area, it enables comprehensive monitoring without gaps.

• Security Sensor Systems

■Light and Sound Deterrent This is an outdoor deterrent device equipped with a high-brightness LED and an electronic siren, utilizing light and sound. ■External Alarm/Disarm Control via Control Input With control input, it is possible to link the controller's alarm/disarm function so that the deterrent operates only while in alarm mode. The control input can switch between a contact A and contact B. *Regardless of the state of the deterrent control input, an alarm output will occur. ■Two Models Available: Electronic Siren Type and Recorded Message Type - PBS-20T/PBS-20TA (Siren Type) Emits alarm sound with an electronic siren, maximum volume approximately 90dB. - PBV-15T/PBV-20TA (Speaker Type) Emits messages using recorded voice synthesis. Can record up to 16 seconds, maximum volume approximately 80dB. ■Day/Night Discrimination Function The alarm sound can be set to operate during the day, only at night, only during the day, or not at all, thanks to the day/night discrimination function. *Regardless of the settings, an alarm output will occur. - PBS-20T/PBS-20TA (Siren Type) Sound duration can be selected as 5 seconds or 20 seconds. *If used in conjunction with control input, the control input takes priority.

• Security Sensor Systems

■4-Stage Power Beam Adopts a 4-stage beam simultaneous cutoff method to prevent malfunctions caused by small animals. It features a high-power beam with a distance margin of 10 times. ■Modulation Frequency Switching Function The modulation frequency can be switched in four stages, preventing infrared wraparound and mutual interference. ■Light Emission Power Switching Function The light emission power can be switched in two stages, allowing for efficient settings according to the warning distance. ■Auto Gain Lock Function Within the maximum warning distance, it automatically sets the optimal sensitivity margin for any warning distance. ■External Environment Diagnosis Function If the light reception level decreases due to changes in weather such as dense fog, heavy rain, or snowfall, it will notify you through environmental output. ■Programmable AGC Function Automatically increases light reception sensitivity during bad weather such as dense fog, heavy rain, or frost to prevent malfunctions. ■Alarm Memory Display Function Easily check the sensors that have triggered an alarm. You can choose between auto-reset and manual reset options. ■Sound Check Function Allows for adjustments and confirmations through sound during light axis adjustment, operation checks after installation, alarm memory display, and gain lock confirmation.

• Security Sensor Systems

■Adoption of Fuzzy Theory The two outputs from the dual twin sensor are processed by a newly developed CPU, separating the temperature difference information between the detection object and background, and the size information of the detection object. Using fuzzy theory, it makes a highly accurate judgment on whether the detection object is a human or a small animal, and outputs an alarm. ■Compact and High Performance A compact and soft design that matches well with interior decor. With a newly designed high-sensitivity dual twin sensor, optical system, and signal processing circuit, it has achieved an even higher density of the monitored area. ■Micro-Motion Detection Function By switching the mode selector, the dual twin sensor operates as two independent twin sensors. The number of sensitive zones doubles (from 18 pairs to 36 pairs), transforming it into a highly sensitive micro-motion detection sensor that can detect even slight movements of the human body or limbs. ■Abnormality Display Function Alarm Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm during monitoring through the blinking or lighting of the memory display light (yellow). ■Abnormality Alarm Function It notifies of abnormalities through continuous alarm output and continuous lighting of the alarm display light.

• Security Sensor Systems

For more details, please refer to the basic information.

• Entrance/exit management and personal identification system

For more details, please refer to the basic information.

• Entrance/exit management and personal identification system

■Features ● Ideal as a presence display unit for conference rooms and reception rooms, as well as a control unit for various lighting fixtures. ● The connected sensors can be passive sensors, infrared sensors, etc., and are not limited to one-shot output types, allowing for selection of models suited to the detection area. ● Compact and lightweight design.

• Security Sensor Systems
• Security devices

■Features By installing a transmitter on the network camera side and a receiver on the network recorder side, the wiring distance can be extended. ◆When using PoE power supply The wiring distance between one network camera (900HD series) and the network recorder (HNVR-401/801/1601) can be extended up to 200m. *Not compatible with N-PTZ910HD/930HD ◆When not using PoE power supply (installing multiple cameras on the transmitter side and wiring between the transmitter and receiver with one LAN cable) HNVR-401/801... Up to 600m for 2 cameras, and up to 400m for 3 cameras. HNVR-1601... Up to 600m for 4 cameras, and up to 400m for 6 cameras. *HNVR401/801 supports a maximum of 3 cameras, while HNVR1601 supports a maximum of 6 cameras. *Not compatible with N-PTZ910HD/930HD.

• Security cameras and surveillance systems

■Features ● This is a power supply and extension unit for 1 channel of PoE/PoE+ compatible network cameras. (Can be used as a power supply for PTZ network cameras) ● PoE output power can supply up to 30W. ● Wiring distance can be extended up to 100m. Camera - 100m - NH-PUE220 – 100m – NVR ● Equipped with an operation indicator light. (On when powered, off when not powered) *Please use a LAN cable of category 5e (Cat5e) or higher for connection.

• Security cameras and surveillance systems