セキュリティハウス List of Products and Services

For more details, please refer to the basic information.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

■Features ●Can be installed on "walls" or "switch boxes" indoors. ●Can also be used on "nageashi" (horizontal beams) in traditional Japanese architecture, such as important cultural properties. ●Horizontal adjustment of 15° is possible with the mounting holes on the sensor base. ●The exterior is painted black to match the sensor.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

■Features ● It is placed at the corner of the bed exit. It connects to an optional distribution outlet and nurse call sub-unit, or to a transmitter, and notifies you when pressure is applied as someone moves to the corner to get out of bed. ● The sheet part is waterproof for daily life and can be disinfected and cleaned (excluding the pin plug). ● The underside is made of a non-slip material. ● Comes with a 3m cord and pin plug. ● The cord incorporates Kevlar fibers, making it resistant to strong pulling and tearing. ● Includes an intermediate switch (used for turning the sensor ON/OFF).

• Security Sensor Systems
• Security devices

■Features ● The IP controller and form have been unified, allowing for installation without any sense of incongruity when placed side by side. ● The power capacity is DC12V・1.5A. ● Equipped with an emergency power supply that provides approximately 15 minutes of backup during a power outage. ● The power supply for the DC power device is AC100V. ● Includes an over-discharge protection circuit that detects a drop in output voltage of the emergency power supply and stops the output. ● Includes an over-current protection circuit that detects over-current in the output and stops the output.

• Security Sensor Systems
• Security devices

■Features ● This is an embedded magnetic switch that demonstrates its effectiveness when installed in places that are not visible for aesthetic reasons. ● It is suitable for doors with a wide distance from the frame due to its strong magnetic force and long set distance. ● Do not use it by directly attaching it to magnetic materials.

• Security Sensor Systems

■Features ● When the pin is pulled out, a powerful alarm sound resonates, and at the same time, the light flashes. ● DC9V battery (included), volume 130dB, continuous sounding time approximately 90 minutes, weight 100g (including battery), size W56×H70×D25mm. ● Main body: ABS resin. ● Accessories: Cord with clip, cord for door protector. ● Wall mounting bracket. (sold separately) 〈Usage Precautions〉 The battery included with this product is a test battery, so it may run out of life before the specified usage time is reached. Please replace the test battery with a new one as soon as possible.

• Security Sensor Systems

■Malfunction Prevention Measures ● A preliminary alarm will be triggered before the actual alarm to indicate changes in status (malfunction prevention measures) ● The parent unit and child unit have unique ID codes, so they only operate in pairs. Power Saving ● Automatic power activation when the parent unit and child unit are separated (power OFF when combined) ● Achieves long battery life (approximately 150 days with 8 hours of use per day)

• Security Sensor Systems

■Features ●The AHD series allows for modulation of signals between cameras and recorders that are resistant to noise, extending wiring distances. <Extension Distances> ・5C-FB…Recommended 800m, Maximum 900m ・5C-2V…Recommended 600m, Maximum 700m ・3C-2V…Recommended 400m, Maximum 450m ●Install the transmitter just before the camera and the receiver just before the recorder. ●The operation indicator lights up red when power is supplied. ●Includes a dedicated AC adapter (for the receiver side). *The transmitter requires a DC12V or AC24V power supply. The power supplied to the transmitter can be output from the transmitter's power output terminal to the camera. ●This device does not support coaxial video control (UTC), so do not connect this device if you are using coaxial video control (UTC) functionality. ●It does not support power supply for composite cameras.

• Security cameras and surveillance systems

■Features ● AHD camera video can be split into two outputs: AHD and analog. ● AHD camera video can be displayed directly on a monitor using the HDMI output of this device. (Input: AHD BNC×1, Output: AHD BNC Thru×1, HDMI×1, Analog BNC×1) ● An AC adapter (DC12V) is included.

• Security cameras and surveillance systems

Features ● Video input can be distributed to up to 4 video outputs. ● Small and compact design. ● Comes with a dedicated AC adapter. *This device does not support coaxial overlay control (UTC) functionality, so please do not connect this device if you intend to use coaxial overlay control (UTC) functionality.

• Security cameras and surveillance systems

For more details, please refer to the basic information.

• Entrance/exit management and personal identification system

For more details, please refer to the basic information.

• Entrance/exit management and personal identification system

■Features ● This is a checker that measures the reception sensitivity and environmental noise of long-distance wireless systems. By measuring reception sensitivity and environmental noise, it is possible to ensure a more stable operating environment. *Note: It cannot measure the signals of low-power wireless systems. ● It measures reception sensitivity and environmental noise levels using an analog meter display and beep sounds. ● The reception frequency can be switched among four frequencies. ● The type of received signal (transmitter, relay, receiver, or response) can be confirmed via the indicator light. ● In signal confirmation mode, you can choose between "registered" mode, which only measures the signals of registered devices, and "non-registered" mode, which does not require registration.

• Security Sensor Systems
• Security devices

■Features ● It is equipped with an operating mode that allows for the relay of long-distance wireless systems and integration with existing low-power wireless systems. 1. Relay of long-distance wireless systems The radio wave reach distance outdoors is approximately 1 km in line of sight, and it is possible to extend the reach of long-distance wireless systems by an additional 1 km. (Unlimited relaying without restrictions on the number of units) 2. Conversion of transmission waves between long-distance wireless systems and existing low-power wireless systems It is possible to convert the transmission waves of existing low-power wireless systems so that they can be received by the receiver of long-distance wireless systems, and vice versa, allowing the transmission waves of long-distance wireless systems to be received by the receiver of existing low-power wireless systems. ● To achieve more reliable wireless communication even over long distances, it is equipped with a two-way communication function. ● It supports four frequency switching to reduce radio wave interference. ● It has a rainproof structure that ensures safety outdoors (equivalent to IP54). ● In cases where securing power is difficult, it can be powered by the solar-powered device BA-12SLA.

• Security Sensor Systems
• Security devices

■Features ● This is a transmitter for a long-range wireless system equipped with a push button. ● The radio wave reach distance outdoors is approximately 1 km in line of sight. ● A single push of the button sends an alarm signal. ● The display and operation sections are large and easy to press, ensuring a safe design. ● Two types of display stickers, "Emergency" and "Call," are included, allowing for selection based on usage. ● To achieve more reliable wireless communication even over long distances, it is equipped with a two-way communication function. ● It is compatible with four frequency switching to reduce radio wave interference. ● It has a waterproof structure that is safe for outdoor use (equivalent to IP67).

• Security Sensor Systems
• Security devices

■Features ● This is a transmitter for a long-range wireless system that transmits contact signals via radio waves. ● The radio wave reach distance outdoors is approximately 1 km in line of sight. ● It transmits wireless signals (alarm/recovery) corresponding to the ON/OFF signals of a non-voltage contact. ● To achieve more reliable wireless communication even over long distances, it is equipped with a two-way communication function. ● It supports four frequency switching to reduce radio wave interference. ● It has a waterproof structure that is safe for outdoor use (equivalent to IP67).

• Security Sensor Systems
• Security devices

■Features ● This is a transmitter for a long-range wireless system equipped with an infrared sensor. ● The radio wave reach distance outdoors is approximately 1 km in line of sight. ● It is powered by batteries, eliminating the need for power or signal wiring. ● By adopting our unique double modulation method for the infrared beam, we have enhanced the distinguishability from ambient light (such as sunlight and car headlights), achieving reliable outdoor surveillance. ● It is equipped with an infrared sensor with a maximum detection range of 100 m and a four-beam simultaneous shielding type. ● To ensure more reliable wireless communication even over long distances, it features a two-way communication function. ● It is compatible with a four-frequency switching system to reduce radio wave interference. ● It has a rainproof structure that provides peace of mind outdoors (equivalent to IP65).

• Security Sensor Systems
• Security devices

■Features ● This transmitter is designed for a long-range wireless system equipped with a passive sensor that employs an AND detection method for horizontal and downward areas, reducing the risk of malfunction outdoors. ● The radio transmission range outdoors is approximately 1 km in line of sight. ● The monitored area consists of an upper area and a lower area, each with a horizontal coverage of 90°. ● By combining the upper and lower areas, it is possible to monitor a horizontal coverage of 180° with a single unit. ● The detection distance can be adjusted in 10 levels between 2 to 12 meters. ● The installation height is between 0.8 to 1.2 meters. ● To ensure more reliable wireless communication even over long distances, it is equipped with a two-way communication function. ● It features a rainproof structure that provides peace of mind outdoors (equivalent to IP54).

• Security Sensor Systems
• Security devices

■Features ● This is a receiving unit for long-range wireless systems. It receives radio waves from various transmitters and converters for long-range wireless systems, enabling emergency notifications such as alarms for emergencies, intrusions, and equipment abnormalities through various reporting devices and controllers. ● Up to 100 different transmitters (including linked receivers and converters) can be registered. ● Transmitters can be registered across 10 channels, with individual channel displays and separate alarm outputs as well as a total alarm output (1 output) functioning. ● In addition to alarm outputs, it notifies the occurrence of abnormalities in registered transmitters (including linked receivers and converters) through each channel and the LCD section, equipped with four types of outputs that operate according to the nature of the abnormality. (Tamper abnormality, regular transmission abnormality, battery depletion, environmental abnormality) ● To achieve more reliable wireless communication even over long distances, it is equipped with a two-way communication function. ● It features a linked control function that allows multiple receivers to synchronize the received content and the armed/disarmed status. (Up to 5 child units can be linked to a parent unit) ● By supporting four frequency switching, it is possible to reduce radio wave interference when using a large number of transmitters (converters).

• Security Sensor Systems
• Security devices

■Equipped with a 2 Megapixel High-Sensitivity CMOS Sensor Adopts a 2 Megapixel 1/2.8-inch high-sensitivity CMOS sensor, achieving high-definition image display with a resolution of 1920×1080. Additionally, the brightness and image quality of night vision footage have been significantly improved compared to previous models. ■Compression Method H.265 By adopting H.265, which offers even higher compression than H.264, long-duration recording is made possible. (Also supports H.264 and MJPEG) ■Adopts PoE Power Supply Method (IEEE802.3af) Power can be supplied from a PoE HUB. Additionally, it can also be powered by DC12V. ■Equipped with a 4.4x Day/Night Megapixel Auto Iris Lens Features a 4.4x day/night megapixel auto iris lens. (Wide angle f=2.7mm to standard 12mm) Fine angle adjustments can be made according to the monitoring location. (Horizontal angle of view 108° to 32°, vertical angle of view 57° to 18°) ■Equipped with Automatic Focus Adjustment Function Angle and focus adjustments, as well as camera settings, can be made from a recorder (AHD04R-A/08R-A/16R-A) or a computer. *Camera settings can only be configured from a computer.

• Security cameras and surveillance systems

■Features ● This is a dedicated overlay power supply for AHD cameras (960AH series). * It is also compatible with the 940AH series. ● There are two models: for 4 channels (VPS-614AH) and for 8 channels (VPS-618AH). ● The video signal input from the camera input terminal is outputted. (1 input corresponds to 1 output) ● The wiring distance can be up to 250m for 3C-2V and up to 450m for 5C-2V/5C-FB. ● UTC operation from the DVR is possible even when using the overlay power supply. ● The dedicated EIA rack mount brackets are optional. * RK-614EI (for VPS-614AH), RK-618EI (for VPS-618AH).

• Security cameras and surveillance systems

■Features ● This is a dedicated overlay power supply for AHD cameras (960AH series). * It is also compatible with the 940AH series. ● There are two models: for 4 channels (VPS-614AH) and for 8 channels (VPS-618AH). ● The video signal inputted to the camera input terminal is outputted. (1 input corresponds to 1 output) ● Wiring distances can reach up to 250m for 3C-2V and up to 450m for 5C-2V/5C-FB. ● UTC operation from the DVR is possible even when using the overlay power supply. ● The dedicated EIA rack mount brackets are optional. * RK-614EI (for VPS-614AH), RK-618EI (for VPS-618AH)

• Security cameras and surveillance systems

■Equipped with a 2 Megapixel CMOS Sensor Adopts a 2 Megapixel 1/2.8 inch progressive scan CMOS sensor, achieving high-resolution image display of 1920×1080. Additionally, the brightness and image quality of night vision footage have been significantly improved compared to previous models. ■Long-distance transmission via coaxial cable When using a combined power supply, it reduces the degradation of image quality during long-distance wiring of AHD cameras, allowing for clear HD video monitoring up to the maximum wiring distance. Cable types: 5C-2V・5C-FB, maximum wiring distance: up to 450m Cable type: 3C-2V, maximum wiring distance: up to 250m *The above values are actual measured wiring distances and are not guaranteed. Please note that the wiring distance may be shorter depending on the conditions of the cables and connectors used. *When using a DC12V power supply, please use within the separately specified recommended wiring distance. ■Equipped with a 4.2x Auto Iris Motorized Lens Features a 4.2x auto iris motorized lens. (Wide angle f=2.8mm to standard 12mm)

• Security cameras and surveillance systems

■Equipped with a 2 Megapixel CMOS Sensor Adopts a 2 Megapixel 1/2.8 inch progressive scan CMOS sensor, achieving high-definition image display with a resolution of 1920×1080. Additionally, the brightness and image quality of night vision footage have been significantly improved compared to previous models. ■Long-distance transmission via coaxial cable When using a combined power supply, it reduces the degradation of image quality during long-distance wiring of AHD cameras, allowing for clear Full HD video monitoring up to the maximum wiring distance. Cable types: 5C-2V, 5C-FB, maximum wiring distance: up to 450m Cable type: 3C-2V, maximum wiring distance: up to 250m *The above values are actual measured wiring distances and are not guaranteed. Please note that the wiring distance may be shorter depending on the conditions of the cables and connectors used. *When using a DC12V power supply, please use within the separately specified recommended wiring distance. ■Equipped with a 4.2x Auto Iris Motorized Lens Features a 4.2x auto iris motorized lens. (Wide angle f=2.8mm to standard 12mm) Fine angle adjustments can be made according to the monitoring location.

• Security cameras and surveillance systems

■Equipped with a 2 Megapixel CMOS sensor Adopts a 2 Megapixel 1/2.8 inch progressive scan CMOS sensor, achieving high-definition image display with a resolution of 1920×1080. Additionally, the brightness and image quality of night vision footage have been significantly improved compared to previous models. ■Long-distance transmission using coaxial cable When using a combined power supply, it reduces the degradation of image quality during long-distance wiring of AHD cameras, allowing for clear HD video monitoring up to the maximum wiring distance. ■Cable types: 5C-2V・5C-FB, maximum wiring distance: up to 450m Cable type: 3C-2V, maximum wiring distance: up to 250m *The above values are actual measured wiring distances and are not guaranteed. Please note that wiring distances may be shorter depending on the conditions of the cables and connectors used. *When using a DC12V power supply, please use within the separately specified recommended wiring distance. ■Equipped with a 4.2x auto iris motorized lens Features a 4.2x auto iris motorized lens. (Wide angle f=2.8mm to standard 12mm)

• Security cameras and surveillance systems

Equipped with a 2-megapixel CMOS sensor Adopts a 2-megapixel 1/2.8-inch progressive scan CMOS sensor, achieving high-definition image display with a resolution of 1920×1080. Additionally, the brightness and image quality of night vision footage have been significantly improved compared to previous models. Achieves long-distance transmission with coaxial cable When using a combined power supply, it reduces the degradation of image quality during long-distance wiring of AHD cameras, allowing for clear Full HD video monitoring up to the maximum wiring distance. Cable types: 5C-2V, 5C-FB, maximum wiring distance: up to 450m Cable type: 3C-2V, maximum wiring distance: up to 250m *The above values are actual measured wiring distances and are not guaranteed. Please note that the wiring distance may be shorter depending on the conditions of the cables and connectors used. *When using a DC12V power supply, please use within the separately specified recommended wiring distance. Equipped with a 4.2x auto iris motorized lens Features a 4.2x auto iris motorized lens. (Wide angle f=2.8mm to standard 12mm)

• Security cameras and surveillance systems

■Ideal Alarm for Attention Alerts This is an alarm device with LED flashes and a buzzer. It is perfect for alerting during shutter operations or for warning of approaching vehicles. ■Excellent Visibility With the adoption of high-power LEDs and a 180° viewing angle, it offers outstanding visibility. ■Loud Buzzer Despite its small size, it has a built-in buzzer that produces a loud sound of approximately 88dB or more (with a sound reduction feature). ■Multi-Color Emission With a single unit, it can emit four colors based on signal input (steady: red, green / flashing: red, yellow, white), allowing for versatile use depending on the application. (Priority given to rear input) ■Rainproof Structure It has a rainproof structure equivalent to IPX4, making it suitable for outdoor use without any additional protection. ■Compatible with Single Switch Boxes It can be mounted externally and is also compatible with single switch boxes, allowing for flexible installation options.

• Security Sensor Systems
• Security devices

■Significantly improved reliability through registration Only the signals from registered transmitters and repeaters are relayed, preventing interference from unnecessary relaying. *An unregistered mode that relays all signals without registration is also available. ■Unlimited relaying The registration system has removed limitations on the number of relays. By using registered repeaters, it is now possible to implement wireless systems even in large buildings where signals previously could not reach. ■Frequency switching function By supporting four frequency switching, it can reduce signal interference when multiple transmitters or repeaters are installed. (Frequencies: F1, F2, F3, F4) *(1) Transmitters, receivers, and repeaters other than the four-frequency switching type use frequency F1. (2) The frequency differs from F1 for the RTX-300. ■Registration method Registration can be done by sending a signal from the transmitter for activation registration or by entering the serial number of the transmitter (repeater) for serial number registration. *Registration of RTX-100/200 series repeaters is limited to serial number registration.

• Security Sensor Systems
• Security devices

■Features ● This product is installed near the pocket of automatic doors to implement safety measures against pinching and collision at the FIX (side wall) during the operation of the automatic door. ● The height is fixed at 900mm, and the width sizes are available in four models: DGS-700 (W:700) DGS-800 (W:800) DGS-900 (W:900) DGS-1000 (W:1000) ● The frame material is stainless steel (SUS304 1.5t) with a hairline finish. ● The product is delivered as a fully assembled unit, eliminating the need for on-site assembly. It simplifies installation as it only requires fixing with anchor bolts or similar.

• Security Sensor Systems
• Security devices

■Features ● This product is installed near the pocket of automatic doors to provide safety measures against pinching and collisions at the FIX (side wall) during the operation of the automatic door. ● The height is fixed at 900mm, and the width options include four models: DGS-700 (W:700), DGS-800 (W:800), DGS-900 (W:900), and DGS-1000 (W:1000). ● The frame material is stainless steel (SUS304 1.5t) with a hairline finish. ● The product is delivered as a fully assembled unit, eliminating the need for on-site assembly. It can be easily secured with anchor bolts, simplifying the installation process.

• Security Sensor Systems
• Security devices

■Features ●This product is installed near the pocket of automatic doors to ensure safety measures against pinching and collisions with the FIX (side wall) during the operation of the automatic doors. ●The height is fixed at 900mm, and the width options include four models: DGS-700 (W:700), DGS-800 (W:800), DGS-900 (W:900), and DGS-1000 (W:1000). ●The frame material is stainless steel (SUS304 1.5t) with a hairline finish. ●The product is delivered as a fully assembled unit, eliminating the need for on-site assembly. It simplifies installation as it only requires securing with anchor bolts or similar fasteners.

• Security Sensor Systems
• Security devices

■Features ●This product is installed near the pocket of automatic doors to provide safety measures against pinching and collisions with the FIX (side wall) during the operation of the automatic door. ●The height is fixed at 900mm, and the width sizes are available in four models: DGS-700 (W: 700) DGS-800 (W: 800) DGS-900 (W: 900) DGS-1000 (W: 1000) ●The frame material is stainless steel (SUS304 1.5t) with a hairline finish. ●The product is delivered as a fully assembled unit, eliminating the need for assembly on-site. It can be easily fixed in place with anchor bolts, simplifying the installation process.

• Security Sensor Systems
• Security devices

■Features ● During verification, the central white indicator light briefly turns blue and then switches to a green unlocking indicator. ● With an IPX5 protection rating, it can be installed in locations exposed to direct rain. ● It is a compact card reader measuring 70mm in width, 120mm in height, and 22mm in thickness. ● It has chemical resistance to sodium hypochlorite solution for cleaning. ● It can be used as either an ACsmart or ACsmart2 card reader.

• Entrance/exit management and personal identification system

For more details, please refer to the basic information.

• Entrance/exit management and personal identification system

■Features ● This is an 8-port PoE+ HUB compatible with each network camera (S series/T series). (Maximum 30W per port, total of 115W for 8 ports) ● The PoE power supply ports (8 ports) support 10/100BASE. *Only one camera can be connected to each port. NVRs and HUBs cannot be connected. *Compliant with POE+ (IEEE802.3AT) / POE (IEEE802.3AF) ● The LAN connection ports (2 ports) support 1000BASE and can connect up to 4 devices in series. Please use these ports when connecting to NVRs or HUBs. *Plug & Play is not supported. *EX mode and ST VLAN mode cannot be used. Please use ST mode.

• Security cameras and surveillance systems