セキュリティハウス List of Products and Services

For more details, please refer to the basic information.

• Entrance/exit management and personal identification system

■Achieves a maximum installation height of 4m without a target Even with a high door of 4.0m, it can provide a spacious entrance while maintaining safety with the doorway monitoring function. It is also suitable for entrances of industrial facilities. ■Industry-leading 60 spots Maintaining a high-density area of 60 spots at installation heights from 2.0m to 4.0m reduces the risk of contact with doors during rushing into the entrance or diagonal entry. ■Equipped with ECO mode function! It can reduce unnecessary opening time of automatic doors. ■Easy operation confirmation with 7-color LED In detection range confirmation mode, the color of the displayed LED changes for each detection row, allowing for area measurement and identification of malfunctioning rows. During monitoring, the presence or absence of snow and insect mode settings can be identified by color. ■Improved area fine-tuning function Adjustment of width and depth by one row each is now possible, allowing for precise detection areas tailored to the site while maintaining high density.

• Security Sensor Systems
• Security devices

■Features ● Can be used for unlocking electric locks. ● Ceiling-mounted light sensor. ● Almost unaffected by indoor wind, sound, and temperature changes. ● Self-diagnostic function to determine abnormalities in the sensor itself. ● High-density area arranged in 4 rows with 6 detection patterns per row.

• Security Sensor Systems
• Security devices

■High-density infrared area The detection area achieves a high-density wide area with 72 spots. ■Adjustable area Both the stepping and wide areas can be erased one row at a time, allowing for optimal fine area adjustments. ■Mode switching function The eco mode function reduces unnecessary opening time of automatic doors. ■Operation confirmation function The use of full-color LEDs makes operation confirmation easy. ■Easy installation The industry's first pull-down method achieves a flat, integrated design that preserves the aesthetics of the ceiling. A flattening of approximately 10mm compared to conventional products has been realized.

• Security Sensor Systems
• Security devices

■Features ● There are no movable parts, so there is minimal performance degradation due to wear and aging, resulting in high reliability. ● The suction power is 272 kgf, providing a level of security comparable to that of a standard door lock. ● It is completely waterproof, making it suitable for outdoor use. (※M32M(J) only) ※ Please choose from three types of control panels: DM-700, DM-110K, or DM-110TK. 　(DM-110TK requires the dedicated operation unit ACS-11T.)

• Entrance/exit management and personal identification system

■Features ● There are no moving parts, so there is less performance degradation due to wear and aging, resulting in high reliability. ● The suction power is 272 kgf, providing a level of security comparable to that of a standard door lock. * Please choose from three control panel models: DM-700, DM-110K, and DM-110TK. (DM-110TK requires the dedicated operation unit ACS-11T.)

• Entrance/exit management and personal identification system

■Features ● Operates electric locks or electric strikes remotely. Controls electric locks integrated with a two-wire conversion adapter using two wires. ● Unlocks the electric lock (electric strike) with an operation button, and the status of locking/unlocking and door opening/closing can be confirmed with a display lamp. ● Can control up to 32 electric locks or electric strikes. BAN-AS4: up to 4, BAN-AS8: up to 8, BAN-AS16: up to 16, BAN-AS24: up to 24, BAN-AS32: up to 32. ● Automatically identifies the type of electric lock being used. ● Control of the electric lock can be set to either automatic locking (A mode) or repeated operation (B mode). ● Up to 5 operation display units can be connected per electric lock (electric strike). ● Electric locks can be controlled via external inputs (voltage-free contacts) such as intercoms, timers, and fire alarm systems. * The two-wire conversion adapter AD211 is included. ● Equipped with JEM-A terminals for easy connection to HA systems. ● In case of an abnormality (such as disconnection or forced entry) in the electric lock, an alarm output (voltage-free C contact) can be generated.

• Entrance/exit management and personal identification system

■Features ● Operates electric locks or electric strikes remotely. Controls electric locks with a two-wire conversion adapter using two wires. ● Unlocks the electric lock (electric strike) with an operation button, and the status of locking/unlocking and door opening/closing can be confirmed with an indicator lamp. ● Can control up to 32 electric locks or electric strikes. BAN-AS4: up to 4, BAN-AS8: up to 8, BAN-AS16: up to 16, BAN-AS24: up to 24, BAN-AS32: up to 32. ● Automatically identifies the type of electric lock being used. ● Control of the electric lock can be set to either automatic locking (A mode) or repeated operation (B mode). ● Up to 5 operation displays can be connected per electric lock (electric strike). ● Electric locks can be controlled via external inputs (voltage-free contacts) such as intercoms, timers, and fire alarm systems. * The two-wire conversion adapter AD211 is included. ● Equipped with a JEM-A terminal for easy connection to HA systems. ● In the event of an abnormality (such as disconnection or forced entry) in the electric lock, an alarm output (voltage-free C contact) can be generated.

• Entrance/exit management and personal identification system

■Features ● Operates electric locks or electric strikes remotely. Controls electric locks equipped with a two-wire conversion adapter using two wires. ● Unlocks the electric lock (electric strike) with an operation button, and the status of locking/unlocking and door opening/closing can be confirmed with a display lamp. ● Can control up to 32 electric locks or electric strikes. BAN-AS4: up to 4, BAN-AS8: up to 8, BAN-AS16: up to 16, BAN-AS24: up to 24, BAN-AS32: up to 32. ● Automatically identifies the type of electric lock used. ● Control of the electric lock can be set to either automatic locking (Mode A) or repeated operation (Mode B). ● Up to 5 operation display units can be connected for each electric lock (electric strike). ● Electric locks can be controlled via external inputs (voltage-free contacts) such as intercoms, timers, and fire alarm systems. * The two-wire conversion adapter AD211 is included. ● Equipped with JEM-A terminals for easy connection to HA systems. ● In case of an abnormality (such as disconnection or forced entry) in the electric lock, an alarm output (voltage-free C contact) can be generated.

• Entrance/exit management and personal identification system

■Features ● Operates electric locks or electric strikes remotely. Controls electric locks equipped with a two-wire conversion adapter using two wires. ● Unlocks the electric lock (electric strike) with an operation button, and the status of locking/unlocking and door opening/closing can be confirmed with a display lamp. ● Can control up to 32 electric locks or electric strikes. BAN-AS4: up to 4, BAN-AS8: up to 8, BAN-AS16: up to 16, BAN-AS24: up to 24, BAN-AS32: up to 32. ● Automatically identifies the type of electric lock used. ● Control of the electric lock can be set to either automatic locking (Mode A) or repeated operation (Mode B). ● Up to 5 operation display units can be connected per electric lock (electric strike). ● Electric locks can be controlled via external inputs (voltage-free contacts) such as intercoms, timers, and fire alarm systems. * The two-wire conversion adapter AD211 is included. ● Equipped with JEM-A terminals for easy connection to HA systems. ● In case of an abnormality (such as disconnection or forced entry) in the electric lock, an alarm output (voltage-free C contact) can be generated.

• Entrance/exit management and personal identification system

■Features ● Operates electric locks or electric strikes remotely. Controls electric locks equipped with a two-wire conversion adapter using two wires. ● Unlocks the electric lock (electric strike) with an operation button, and the status of locking/unlocking and door opening/closing can be confirmed with an indicator lamp. ● Can control up to 32 electric locks or electric strikes. BAN-AS4: up to 4, BAN-AS8: up to 8, BAN-AS16: up to 16, BAN-AS24: up to 24, BAN-AS32: up to 32. ● Automatically identifies the type of electric lock being used. ● Control of the electric lock can be set to either automatic locking (Mode A) or repeated operation (Mode B). ● Up to 5 operation displays can be connected for each electric lock (electric strike). ● Electric locks can be controlled via external inputs (voltage-free contacts) such as intercoms, timers, and fire alarm systems. * The two-wire conversion adapter AD211 is included. ● Equipped with JEM-A terminals for easy connection to HA systems. ● In case of an abnormality (such as disconnection or forced entry) in the electric lock, an alarm output (voltage-free C contact) can be generated.

• Entrance/exit management and personal identification system

■Power Outage Compensation The external power supply is DC12V500mA with ample capacity, and it has a built-in power outage compensation circuit that lasts about 30 minutes, allowing for the connection of a keypad, card switch, and even a fingerprint verification switch. ■Compact Adapter with Two-Wire System The main electrical control panel is connected to the included two-wire electric key adapter using CPEVφ0.9-1P or AEφ0.9-2C. ■Control Output with Voltage-Free Relay Contacts State outputs for door opening, unlocking, and temporary unlocking are provided via voltage-free relay contacts. It can be directly connected to security transmitters or automatic reporting devices. ■Abnormalities in Electric Lock Indicated by Alarm If the door is left open abnormally for a set time, or if there are issues such as forced entry or disconnection in the electric lock, it will be indicated by an LED and an alarm buzzer (volume adjustable), and the alarm output (voltage-free relay contacts) will also be activated. ■Various Operation Sub-Devices Can Be Connected In addition to the operation sub-devices RSP-200TKR (exposed type) and RSP-200TKU (embedded type), operation sub-devices from Miwa Lock, such as SSP-C1D and SSP-C1E, can also be connected.

• Entrance/exit management and personal identification system

For more details, please refer to the basic information.

• Entrance/exit management and personal identification system

For more details, please refer to the basic information.

• Entrance/exit management and personal identification system

■Three Operation Modes ● You can choose from three operation modes: "Automatic Locking Mode," "Repeated Lock/Unlock Mode," and "Manual/Automatic Locking Mode." ● In "Automatic Locking Mode," the panel lock function can disable unlocking operations via the buttons on the main panel. ■ Fire Alarm Link Function In addition to continuous unlock input, it is equipped with a fire alarm input. While the signal (non-voltage a contact) from the fire alarm panel is active, unlocking is maintained. (Locks automatically in conjunction with fire alarm recovery.) ■ Supports Long-Distance Wiring Regardless of the type of electric lock, wiring is possible up to 150m (φ0.9mm-3P). (When the main unit is powered by AC100V.) ■ Standard Equipped with Unlock Prohibition Input An additional contact signal input is provided to disable the panel's unlock button and external inputs. This allows you to prohibit unlocking operations in conjunction with security signals or tamper signal inputs. (Unlocking via fire alarm input takes priority even during the prohibition of unlocking.) ■ Various Operation Sub-Devices Can Be Connected In addition to the operation sub-devices RSP-200TKR (exposed type) and RSP-200TKU (embedded type), Miwa Lock's operation sub-devices: SSP-C1D, SSP-C1E, etc., can also be connected.

• Entrance/exit management and personal identification system

Key switch with a special key cylinder It features a key cylinder that is difficult to pick and a special key that is hard to duplicate. Included keys: 3 keys per set Loop indicator and buzzer for abnormality confirmation Equipped with a loop indicator and buzzer that can confirm whether there are any abnormalities through loop input. It also has a spare lamp input, allowing for usage according to the system. Large contact type It has a non-voltage contact that can control output up to AC100V and 10A (resistive load), making it suitable for applications such as security lighting control and AC100V management ON/OFF switches. By supplying AC100V power, an indicator lamp that shows the ON/OFF status can be used. Wiring distance The wiring distance between the key switch main unit and our controller is as follows: ● Wire size used ● Wiring length 0.33mm² (φ0.65mm) Up to 500m 0.64mm² (φ0.9mm) Up to 900m 1.13mm² (φ1.2mm) Up to 1,500m *Please connect the contact output to the key switch input terminal of our controller.

• Entrance/exit management and personal identification system

■ Key switch with a special key cylinder It features a key cylinder that is difficult to pick and a special key that is hard to duplicate. Included keys: 3 keys in 1 set. ■ Key switch adopting a 3-way system convenient for remote operation It employs a 3-way system that allows for setting/resetting the alarm from both the key switch side and the controller side. ■ Loop indicator light and buzzer for confirming the presence of abnormalities Equipped with a loop indicator light and buzzer that can confirm whether there are any abnormalities via loop input. It also has a spare light input, allowing for use according to the system. ■ Wiring distance capability The wiring distance between the key switch main unit and our controller is as follows: ● Wire size used ● Wiring length 0.33mm² (φ0.65mm) Up to 500m 0.64mm² (φ0.9mm) Up to 900m 1.13mm² (φ1.2mm) Up to 1,500m * Please connect the contact output to the key switch input terminal of our controller.

• Entrance/exit management and personal identification system

■Easy Wiring Wiring from the controller to the operation unit, electric lock, and operation display is simple, requiring only two wires connected in a non-polarized manner. Additionally, the keypad, which is often installed outdoors, is designed to be JIS rainproof. ■Scramble LCD Keypad with Rotating Number Sequence The positions of the numbers change with each operation, making it difficult to detect the PIN. This scramble-type LCD keypad is self-illuminating, ensuring reliable operation even in dark environments. ■Setting and Changing the PIN via LCD Screen and Setting Button The setting and changing of the PIN is done through the LCD screen and setting button on the controller. The PIN can be registered with up to 8 different 4-digit combinations. ■Clear Icon Display for Operational Status The icon display on the controller's LCD screen and error codes allow users to check the status of the electric lock and door, as well as the type of error that occurs during a malfunction. ■Alarm Buzzer Effective Against Tampering and Unauthorized Entry If the keypad is unnecessarily pressed four times in succession, an alarm buzzer will sound, helping to prevent tampering and unauthorized entry. Additionally, the design allows for partial disarming of security devices in case of emergencies.

• Entrance/exit management and personal identification system

■Easy Wiring Wiring from the controller to the operation unit, electric lock, and operation display is simple, requiring only two wires connected in a non-polarized manner. Additionally, the keypad, which is often installed outdoors, is designed to be JIS rainproof. ■Scramble LCD Key Method with Rotating Number Sequence The position of the numbers changes with each operation, making it difficult for the passcode to be detected. This scramble-type LCD key is self-illuminating, ensuring reliable operation even in dark environments. ■Setting and Changing Passcodes via LCD Screen and Setting Button Passcode setting and changes are registered using the LCD screen and setting button on the controller. A 4-digit passcode can be registered in up to 8 different combinations. ■Clear Icon Display for Operational Status The icon display on the controller's LCD screen and error codes allow users to check the status of the electric lock and door, as well as the type of error that occurs during a malfunction. ■Alarm Buzzer Effective Against Tampering and Unauthorized Entry If the keypad is unnecessarily pressed four times in succession, an alarm buzzer will sound, helping to prevent tampering and unauthorized entry. Additionally, the design allows for partial disarmament of security devices in case of emergencies.

• Entrance/exit management and personal identification system

■Features ● It is IP65 (splash-proof), so it can be installed without a rainproof box. ● The characters on the metal keypad are backlit and visible at night, and they will not wear off. ● It has two output systems, allowing for use in controlling electric locks and security (dual channel). ● Up to 500 different PIN codes can be set. (Initial value: 4 digits / Maximum: 8 digits) ● It has a built-in heater, making it suitable for installation in cold regions.

• Entrance/exit management and personal identification system

■Dual System Output It has a built-in dual system output and operates by verifying individual PIN codes, allowing this single unit to perform two types of control: setting/resetting mechanical security and opening/closing electric locks. ● Output 1: Output mode can be set ● Output 2: One-shot output ■ Four Output Modes Depending on the connected devices, four types of output modes can be set. ○ Latch Mode A mode where the contacts reverse with each PIN code verification. ○ One-shot Mode A mode that outputs contacts for approximately one second during PIN code verification. ○ Key Switch Mode A mode for remotely operating our controller. ○ Simultaneous Dual Output Mode A mode where two outputs are activated simultaneously during PIN code verification. In cases where unlocking is requested due to threats, it will output an alarm to the security panel while the unlocking output operates. *When using in Key Switch Mode, please set the remote switch LED setting on the controller side to "light up when unlocked." ■ Alarm Buzzer If an incorrect PIN code is entered four times in a row, the built-in buzzer will sound, deterring pranks and intruders.

• Entrance/exit management and personal identification system

■ Capable of output for security and electric lock (2 systems) It has two outputs in one unit, allowing it to replace two units in locations that previously required them. Operation is also possible for security only or electric lock only. *Note: During the security set, there will be no output for unlocking the electric lock. ■ Up to 3 types of passwords can be registered You can register up to 3 types of passwords, ranging from 1 to 8 digits. Additionally, you can specify the operational range based on the password, allowing for user-specific operations. [Operational Range] 1. Control only for set/reset 2. Control only for electric lock unlocking output 3. Control for both set/reset and electric lock unlocking output ■ 3 operation modes available You can select from 3 different operation modes with varying output forms, making it suitable for a wide range of applications. Latch Mode: A mode that switches between set and reset with each password input. One-Shot Mode: When in the 'normal' loop state, you can set for 1 or 5 seconds with password input. 3-Way Remote Switch Mode: A mode for 3-way output used in combination with our controller.

• Entrance/exit management and personal identification system

■Basic design of the operation unit considering usability ● The position of the displayed numbers in the "operation unit" changes with each verification. (Fixed display available) ● Special film is used to prevent peeking from the side. ● Up to three types of PIN codes with 1 to 8 digits can be registered. ● The numeric keypad can connect up to two units, both inside and outside, to one electric lock control panel. ■Three operating modes of the electric lock control panel ● The operating modes can be selected from "Automatic Locking Mode," "Lock/Unlock Repeating Mode," and "Manual/Automatic Locking Mode." ● In "Automatic Locking Mode," the unlocking operation via the buttons on the main panel can be disabled by the panel lock function. ■Fire alarm linkage function In addition to continuous unlocking input, a fire alarm input is equipped. While the signal (no-voltage a contact) from the fire alarm panel is active, unlocking is maintained. (Locking is linked to fire alarm recovery) ■Standard feature of unlocking prohibition input An additional contact signal input is provided to disable the unlocking buttons on the panel and external inputs. Unlocking operations can be prohibited in conjunction with security signals or tamper signal inputs. (Even during the unlocking prohibition, unlocking via fire alarm input takes priority.)

• Entrance/exit management and personal identification system

■Basic design of the operation unit considering usability ● The "operation unit" changes the position of the displayed numbers with each verification. (Fixed display is possible) ● Special film is used to prevent peeking from the side. ● Up to three types of PIN codes, ranging from 1 to 8 digits, can be registered. ● The numeric keypad can be connected to one electric lock control panel with up to two units inside and outside. ■Three operating modes of the electric lock control panel ● The operating modes can be selected from "Automatic Locking Mode," "Lock/Unlock Repeating Mode," and "Manual/Automatic Locking Mode." ● In "Automatic Locking Mode," the unlocking operation via the buttons on the main panel can be disabled by the panel lock function. ■Fire alarm linkage function In addition to continuous unlocking input, a fire alarm input is equipped. While the signal (no-voltage a contact) from the fire alarm panel is active, unlocking is maintained. (Locking is linked to fire alarm recovery) ■Standard feature of unlocking prohibition input An additional contact signal input is provided to disable the unlocking buttons on the panel and external inputs. This allows for the prohibition of unlocking operations in conjunction with security signals or tamper signal inputs. (Even during the unlocking prohibition, unlocking via fire alarm input takes priority.)

• Entrance/exit management and personal identification system

■ Capable of output for security and electric lock (2 systems) Equipped with two output systems in one unit, allowing for security set/reset and electric lock unlocking operations to be handled by a single device. ■ Compatible with embedded and surface mounting With a slim design, it can be embedded in a two-gang switch box or installed on the surface using the included exposed box. (Thickness when mounted on the wall: Embedded: 18.5mm, Surface-mounted: 35mm) ■ Supports 3-mode multi-functionality Compatible with FeliCa/Mifare/I-CODE multi-read. Can operate in a mixed environment. ■ Built-in voice announcement function Includes an announcement function that guides users through operations and control states with voice prompts, helping to prevent operational errors. ■ Three patterns of verification methods to choose from Verification methods can be selected from "Card" only, "PIN" only, or "Card + PIN," allowing for mixed verification methods. (Registrable PIN: 1 to 8 digits) ■ Up to 1000 registrations possible A maximum of 1000 registrations can be made in total for "Card," "PIN," and "Card + PIN."

• Entrance/exit management and personal identification system

■AND authentication with card and keypad Works in conjunction with remote switches (ACS series) and access control management system ACsmart, allowing authentication of ID cards or PIN codes only when facial recognition is successful. ■Recommended registration limit of 100 people Registration and operation are recommended for up to 100 people (Registration of 3 to a maximum of 10 facial images per person) ■Easy registration via computer Facial registration can be easily done by connecting the device to a computer via USB and using the included software. ■Measures to prevent impersonation Can be proposed as a countermeasure against unauthorized use of cards in case of theft or loss of ID cards. By adding facial recognition to ID card authentication, it helps prevent impersonation.

• Entrance/exit management and personal identification system

■Features ●This product is a "security alarm" that detects intruders' movements with its built-in sensor and issues a warning with the barking sound of a shepherd dog in response to the movement. ●Since it uses radar, it can detect moving objects beyond specific obstacles. ●It has radar detection sensitivity adjustment and volume adjustment functions, allowing it to detect intruders up to 6 meters away. ●It can be easily moved, making it suitable for a wide range of applications, including homes, offices, and warehouses. ●In addition to the barking sound of a dog, it also offers options for forest melodies and visitor notifications.

• Security Sensor Systems
• Security devices

■Features ● Lightweight and compact, making it easy to install anywhere. ● Detects water leaks using electrodes located at the bottom of the case (two in the main sensor section and two in the point sensor section), and alerts with sound and flashing indicator lights. ● Battery-operated and does not require wiring, allowing for easy placement in the desired location, such as on the floor. ● Leak detection is possible at two locations: the main unit and the included point sensor, enabling monitoring of leaks in both the main unit and a separate, distant location (cable length between main unit and point sensor is 3.5m). ● The point sensor can be installed in concealed areas (such as inside ceilings or under floors), while the main unit can be placed in a location that allows for easy maintenance (near inspection openings or above the floor). ● Waterproof design ensures it will not malfunction even if submerged. ● Comes with height adjustment screws for stable installation depending on the location. *Please note that water with extremely low impurities, such as pure water or ultra-pure water, cannot be detected.* 〈Usage Precautions〉 The battery life is an estimate based on operation at room temperature and is not guaranteed.

• Security Sensor Systems
• Security devices

■Features ● Lightweight and compact design, easy to install anywhere. ● Detects water leaks with two electrodes located at the bottom of the case, alerting with a buzzer sound and flashing indicator light. ● Battery-operated and does not require wiring, allowing for simple placement on the floor. ● Waterproof structure ensures it will not malfunction even if submerged. ● Equipped with adjustable screws for stable installation according to the situation. *Please note that water with extremely low impurities, such as pure water or ultra-pure water, cannot be detected. 〈Usage Precautions〉 The battery life is an estimate based on operation at room temperature and is not guaranteed. The battery included with this product is a test battery, which may deplete before reaching the specified usage time. Please replace the test battery with a new one as soon as possible.

• Security Sensor Systems
• Security devices

■Features ● Its low-cost and compact design allows for easy installation in areas where water leakage is a concern. ● With a long battery life of approximately 5 years (※1) and the option for battery replacement, it can be used not only for checking water-related equipment during new construction but also for permanent operation. ● The alarm will sound continuously for up to 24 hours while detecting water leakage. (※2) 　※1. This is the battery life in standby mode. It is a guideline for operation at room temperature and not a guaranteed value. 　※2. This applies when using a new battery. 　※ Please note that water with extremely low impurities, such as pure water or ultra-pure water, cannot be detected.

• Security Sensor Systems
• Security devices

■Features ● When an intruder is detected, it emits a loud alarm at 90dB to deter them. ● The set/unset configuration can be done with any 1 to 8 digit PIN code. ● It has output terminals, allowing for easy expansion by connecting chimes or sirens, or integrating with wireless devices and reporting systems for notifications at a distance. ● It can be placed on a stand or mounted on a wall. ● It includes a function to notify when the batteries need to be replaced.

• Security Sensor Systems
• Security devices

■Features ● This product is only a lamp holder (bulb sold separately) ● Excellent rain resistance and durability ● Suitable for single switch boxes ● Compatible with E26 base bulbs

• Security Sensor Systems
• Security devices

■Features ● This product is only a lamp holder (bulb sold separately) ● Excellent rain resistance and durability ● Suitable for single switch boxes ● Compatible with E26 base bulbs

• Security Sensor Systems
• Security devices

■Features ● This product is only a lamp holder (bulb sold separately) ● Excellent rain resistance and durability ● Suitable for single switch boxes ● Compatible with E26 base bulbs

• Security Sensor Systems
• Security devices

■Features ● This product is only a lamp holder (bulb sold separately) ● Excellent rain resistance and durability ● Suitable for single switch boxes ● Compatible with E26 base bulbs

• Security Sensor Systems
• Security devices

■Features ● It can be installed on various surfaces such as ceilings, walls, poles, and vises (with a wide range of options available). ● It is ideal for exterior use due to its excellent rain resistance and durability. ● It is compatible with single switch boxes. ● Please connect it to the popular MS series motion and sound sensor switches for use as an automatic lighting device. Additionally, it can be used alone as a deterrent security light.

• Security Sensor Systems
• Security devices

■Features ● It can be installed on various surfaces, including ceilings, walls, poles, and vises (with a wide range of options available). ● It is ideal for exterior use due to its excellent rain resistance and durability. ● It is compatible with single switch boxes. ● Please connect it to the popular motion and sound sensor switch MS series for use as an automatic lighting device. Additionally, it can be used alone as a deterrent security light.

• Security Sensor Systems
• Security devices

■Features ● It can be installed on various surfaces such as ceilings, walls, poles, and vices (with a wide range of options available). ● It is ideal for exterior use due to its excellent rain resistance and durability. ● It is compatible with single switch boxes. ● Please connect it to the popular MS series motion and sound sensor switches for use as an automatic lighting device. Additionally, it can be used alone as a deterrent security light.

• Security Sensor Systems
• Security devices

■Features ● It can be installed on various surfaces such as ceilings, walls, poles, and vises (with a wide range of options available). ● It is highly resistant to rain and durable, making it ideal for exterior use. ● It is compatible with single switch boxes. ● Please connect it to the popular motion and sound sensor switch MS series for use as an automatic lighting device. Additionally, it can be used alone as a deterrent security light.

• Security Sensor Systems
• Security devices

For more details, please refer to the basic information.

• Security Sensor Systems
• Security devices