セキュリティハウス List of Products and Services

■Features ● Improved workability. Comes with double-sided tape for door creaking prevention Sales Units Sold in units of 100 pieces

• Security Sensor Systems
• Security devices

■Features ●Up to 10 controllers can be connected ●Control of electric locks (temporary unlocking output to the electric lock control panel) is possible ●Maximum of 200 card registrations ●In case of loop abnormalities, the corresponding route number will be announced via voice *Felica is a registered trademark of Sony Corporation. *Felica is a technology for contactless IC cards developed by Sony Corporation.

• Security Sensor Systems
• Security devices

■Features ● Explosion-proof and drip-proof design allows for operation in various field environments. ● If the person wearing it remains in a fallen position for longer than the set time, it will be considered an emergency, and an alarm will sound. (Fall hold timer: can be set to 10 seconds, 30 seconds, 60 seconds, or 120 seconds) ● Emergency calls can also be made using the push button. ● Can be attached to a belt or similar using the included soft case. ● Equipped with an alarm delay timer function (pre-alarm sound after 10 seconds before the main alarm). *When carried in the included soft case, it has a drip-proof structure.

• Security Sensor Systems
• Security devices

■Main Features If the person wearing it remains in a fallen state for longer than the set time, an alarm will sound, indicating an abnormal situation. (Fall retention timer: can be set to 10 seconds, 30 seconds, 60 seconds, or 120 seconds) ● An emergency call can also be made using the push button. ● By using the included soft case, it can be attached to a belt or similar. ● Equipped with an alarm delay timer function (pre-alarm sound transmission 10 seconds after activation) 〈Usage Precautions〉 The battery life is a guideline for operation at room temperature and is not guaranteed. ■ The battery included with this product is a test battery, so it may run out before reaching the specified usage time. Please replace the test battery with a new one as soon as possible.

• Security Sensor Systems
• Security devices

■Wide Range of Surveillance Unlike conventional infrared sensors, the adoption of multi-beam technology allows for a wide range of surveillance. It is ideal for detecting residual individuals in CD and ATM corners. ■Mutual Interference Prevention Function With the built-in mutual interference prevention function, it is possible to connect and closely install two sensors, enhancing both usability and installation efficiency. ■Automatic Sensitivity Correction Function After adjusting the optical axis, simply turning the power OFF and ON (temporarily cutting off the power and then restoring it) sets the sensitivity to the optimal level for the installation distance and environment, thanks to the built-in automatic sensitivity correction function. ■Light Level Stability Indicator (Green LED) The indicator lights up when the light reception level exceeds 20% of the operational level, making it easy and reliable to adjust the optical axis during installation and maintenance. ■Ultra-Thin Size Achieving a thickness of 13mm and a width of 30mm, this ultra-thin design does not limit installation locations and does not create any discomfort after installation.

• Security Sensor Systems

■Features The ER-01 can be used with models other than the PXB series, as long as they are equipped with a monitor jack, via the ER-01AS. (The upper/lower switch and self-check function cannot be used.) ■Applicable Models - PB-IN-50/100/200HF - PB-50/100/200FZ - PB-IN-100AT - PB-60TE - PB-100T - PXB-20/40/60TE - BUS-20/40/60XT

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems
• Security devices

For more details, please refer to the basic information.

• Security Sensor Systems

■Features ● This is a freestanding pole compatible with LED signal lights DST-(H)100 series and DST-201. ● The height is 1500mm. ● It has a robust structure made of steel plate. ● Necessary screws for mounting the LED signal lights DST-(H)100 series and DST-201 are included.

• Security Sensor Systems
• Security devices

■Features ● Adopts high-brightness LEDs, providing high visibility even in strong sunlight. ● Significantly reduces power consumption compared to bulb types. ● Equipped with an alarm buzzer (for integration with seat shutters, vehicle control systems, etc.). ● Waterproof construction allows for outdoor use. * For the non-voltage contact input type, the display color will invert when a signal is input. (At the time of shipment: during make, green → red)

• Security Sensor Systems
• Security devices

■Features ● Adopts high-brightness LEDs, providing high visibility even in strong sunlight. ● Significantly reduces power consumption compared to bulb types. ● Equipped with an alarm buzzer (for integration with seat shutters, vehicle control systems, etc.). ● Waterproof structure allows for outdoor use. * For the non-voltage contact input type, the display color will reverse when a signal is input. (At the time of shipment: during make, green → red)

• Security Sensor Systems
• Security devices

● The transmitter is a compact keychain type. ● The range is approximately 10m. ● The transmitter has a power ON/OFF switch. ● The transmission LED makes it easy to determine when the battery is low. ● The receiver is also compact and can be easily housed within control panels, with only the antenna being able to be placed outside. (Antenna cable: 4m) ● Up to 100 transmitters can be registered with the receiver. * The above range of the radio signal is a guideline. Please note that it may vary depending on the installation environment.

• Security Sensor Systems
• Security devices

■The display position changes every time. There are 6 patterns for the numeric keypad display, and the display position changes each time you use it, so specific areas do not become discolored or worn. *Depending on the settings, the arrangement of the numbers can also be displayed randomly. ■Anti-peeping function The numeric keypad uses polarized glass, so there is no worry about a third party peeping at the PIN. ■Operation prohibition function You can prohibit numeric keypad operation via external contact signals, allowing for operations such as preventing entry during security monitoring linked to a security system. ■Vandalism prevention function If the PIN is entered incorrectly 5 times in a row, a warning sound will sound for 10 seconds, and operation will be disabled for 3 minutes, helping to prevent unauthorized unlocking of the electric lock due to vandalism. ■User-friendly features and specifications ●Up to 2 operation units can be connected to one controller, allowing for control of both entry and exit. ●Settings such as the PIN will not be lost even in the event of a power outage. ●The operation unit has an IPX5 protection rating, allowing it to be installed in locations directly exposed to rain, such as the exterior walls of buildings.

• Entrance/exit management and personal identification system

■Features ● This is a hybrid remote control that enhances security performance using infrared and radio waves. ● Remote control operation can be selected from three patterns: infrared only, radio only, and infrared + radio. ● The remote control range is approximately 8m for infrared and approximately 20m for radio waves. ● The remote control operation is a single-point type, making it ideal for controlling automatic doors, gates, and opening and closing sheet shutters. ● Up to 200 remote controls can be registered. ● The receiver is available in two types: exposed type (DHV-100R) and embedded type (DHV-24R), allowing selection based on the installation location. ● The exposed type has a rainproof structure, allowing for outdoor installation as is. ● The embedded type is compatible with single switch boxes, enabling discreet installation even indoors. ● The exposed type (DHV-100R) supports a power supply voltage of AC100-200V, while the embedded type (DHV-24R) supports a power supply voltage of DC12-24V. ● The exposed type (DHV-100R) is equipped with an infrared free mode function. If operation does not require security, this function allows for immediate use without remote control registration (infrared mode only).

• Security Sensor Systems
• Security devices

■Features ■By incorporating it into the CX-3000 series, you can record the setting/unsetting of alarms and alarm history on a memory card. ■When linked via communication, it is also possible to confirm whether the operation was performed on the main panel or the sub-panel. ■When using BUS-C800 and CX-3000BUS together, it is also possible to record the history of various abnormalities in the bus line system (tamper abnormalities, voltage abnormalities, equipment abnormalities, disconnection abnormalities, etc.). ■The history data saved on the memory card is stored in CSV format, allowing for verification on a PC. *History display is not possible on the unit's LCD panel. ■The usable memory card is up to 2GB, with a storage capacity of approximately 100,000 entries. When the maximum storage capacity is reached, older data will be overwritten. *The unit comes with a 2GB memory card upon shipment. ■Even if no memory card is set, the unit can store approximately 8,000 entries of history internally. If a memory card is set when needed, it is also possible to extract the most recent history.

• Security Sensor Systems
• Security devices

For more details, please refer to the basic information.

• Security Sensor Systems
• Security devices

■Features The individual output unit can be configured for individual alarm output, individual set output, individual loop output, etc. *Up to 3 units (3 systems) can be embedded for every 10 channels.

• Security Sensor Systems
• Security devices

■Features ●It is compact and easy to handle. ●In the event of an emergency, it dulls the opponent's attack with defense and tear gas spray, buying time to escape and ensuring safety. ●It is ideal for safety measures in counter services at financial institutions (banks, post offices, JA, etc.).

• Security Sensor Systems

■Features ●It is compact and easy to handle. ●Normally, it contributes to PR by holding flyers. ●In the event of an emergency, it dulls the attack of the opponent with defense and tear gas spray, buying time to escape and ensuring safety. ●It is ideal for safety measures in counter services at financial institutions (banks, post offices, JA, etc.).

• Security Sensor Systems

■Features ● A transparent and lightweight protective shield ● Protects against attacks from knives, bats, etc. ● Made from a strong, viscous special resin, offering excellent visibility and mobility ● Comes with a sturdy grip made of foam rubber ● The grip can be freely attached to either convex or concave surfaces ● Lightweight, available in 3mm and 5mm thicknesses for stone and blade protection

• Security Sensor Systems

■ Signal input displayed by chime and LED When a signal is input from a connected device, it is indicated by a chime sound and LED. ● Input can be switched between a contact/b contact settings. ■ Output and display mode switching function There are two modes: 'Hold mode', which continuously outputs until the reset switch on the main unit is pressed, and '3-second mode', which outputs for 3 seconds and then automatically resets, allowing for settings according to the system. ■ Chime sounds and melodies selectable from various options Chime sounds can be selected from 6 types of chime sounds and 2 types of melodies. ● Ping pong / pipipipi / purupuru / pororon / ping pong pan pon / pi-po ● Always Dreaming / Seagull Sailor ■ Communication function allows for expansion up to 4 locations The display panel can be expanded to a maximum of 4 locations, making it suitable for large-scale systems. ● Operation and signal input can be performed from any of the display panels No.1 to No.4. ● Input can be received and set/reset from any CHN-1. ● Wiring between each display panel can be done with a 2-core wire, with a maximum wiring distance of 100m for each.

• Security Sensor Systems
• Security devices

For more details, please refer to the basic information.

• Security Sensor Systems
• Security devices

■Features ● Ideal for simple security systems. By connecting various sensors to this unit, it deters intruders with sound and light. ● It uses high-brightness LEDs for the light source, which not only enhances visibility but also makes it robust against vibrations and impacts. ● It can operate solely with light (flashlight), making it versatile for alerting purposes. ● It has a rainproof structure, allowing for outdoor installation. ● By connecting a two-way external remote switch, remote (wired) arming/disarming is possible. (Recommended product KE-500R) ● A delay timer function can be selected. *However, an external signal input is required for arming/disarming operations. ● Two types of alarm sounds are available: siren type and voice type. Siren type: C-25A Voice type: C-35A Message: "An intrusion has occurred." ● The alarm volume can be adjusted using the volume control. (Applicable to both C-25A and C-35A) ● During an alarm, memory operation is possible with flashlight blinking. ● A loop check of the sensors is performed at the start of arming. (Lock confirmation function) ● Power output function for sensors (DC12V200mA)

• Security Sensor Systems
• Security devices

■Features ●Ideal for simple security systems. By connecting various sensors to this unit, it deters intruders with sound and light. ●Uses high-brightness LEDs for the light source, providing excellent visibility and robustness against vibrations and impacts. ●Can operate solely with light (flashlight), making it versatile for alerting purposes. ●Rainproof design allows for outdoor installation. ●By connecting a two-way external remote switch, remote (wired) arming/disarming is possible. (Recommended product KE-500R) ●Delay timer function can be selected. *However, external signal input is required for arming/disarming operations. ●Two types of alarm sounds are available: siren type and voice type. Siren type: C-25A Voice type: C-35A Message: "An intrusion has occurred." ●Volume adjustment is possible via the alarm sound volume control. (Applicable to both C-25A and C-35A) ●During an alarm, memory operation via flashlight blinking is possible. ●A loop check of the sensors is performed when arming begins. (Door locking confirmation function)

• Security Sensor Systems
• Security devices

■Features ● This is an attachment for mounting an infrared sensor on the building wall while avoiding window frames and gutters. ● The depth of the spacer is 50mm. (The sensor can be mounted 50mm away from the wall.) ● If 50mm is insufficient, it can be used in combination with additional spacers. ● Comes in a set of two. *The pitch of the mounting screws is common with BWS-60TE for PB-TE (83.5mm), but since the external dimensions of the sensor differ, please use compatible options for design purposes.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

■Features It can be placed on a wheelchair or chair. It outputs a make (a contact) when pressure is applied. When combined with a display panel and contact input transmitter (and receiver), it will notify you if the user has gotten off (or fallen from) the wheelchair. - Waterproof for daily life ● Detection output: No-voltage a contact (when pressure is applied) ● Pressure sensitivity: 1.6 to 1.8 kg/10 cm² ● Material: Surface - PVC (cream), Back - soft PVC (gray) ● Dimensions: 330 × 330 × 6 mm ● Lead wire: 1m cable with Kevlar wire (cream color/RCA plug included) ■ Dedicated jack transmitter HC-116(B) (with on/off switch): Includes two AA alkaline batteries and a strap with a clip, priced at 24,000 yen.

• Security Sensor Systems

■Features This box allows for outdoor embedded installation without compromising the waterproof protection rating.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

■Features ● Made of stainless steel, suitable for outdoor use. ● By embedding the infrared sensor into walls or similar surfaces, it eliminates protrusions, preventing obstruction of passage and considering aesthetics. ● The infrared sensor is stored as is, and the hood on the sensor cover protects the infrared beam from frost and dew, maintaining the warning line. ● Complies with RoHS directives. ● Sold individually. *As this is a made-to-order product, please contact your nearest sales office for delivery times. ■Compatible Models PXB-HFA series, PXB-F series, PXB-100SW, BUS-XF series, PB-IN-HF series, PB-F series, PB-IN-100AT, BUS-HF series *PH-50W is not compatible.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems

■Compatible Products KP-30L KP-30L(B) KP-48L KP-80LL KP-80LL(B) KP-80LS KP-80LS(B) KP-90L KP-100 KP-100B KP-150 KP-150B

• Security Sensor Systems

■Features When the infrared sensor is mounted on a pole, the pole section on the back of the sensor is covered, concealing the wiring to the sensor. By concealing it, security is enhanced and aesthetics are improved. It can be installed at both the top and middle sections of the pole. *Compatible pole diameter: Φ42–49mm

• Security Sensor Systems

For more details, please refer to the basic information.

• Security Sensor Systems