EPJ List of Products and Services

<NETIS Registration Number: KT250002-A> Water-stopping material Tome Taro registered under the jurisdiction of "KT"! "Water ingress countermeasure method for penetrations using non-curing water-stopping material that does not dissolve in water and maintains viscosity" 【Non-curing Polyolefin-based One-component Water-stopping Putty Tome Taro (R)】 <Features> ■ Heat resistance up to 90℃, stable water stopping without yielding to high-pressure cables ■ Putty alone/water-tight performance clears 0.05MPa (with optional use 0.15MPa) ■ Can also handle water leakage (flowing water) ■ Consideration for cable re-pulling allows for removal/re-filling ■ Unlike curing water-stopping materials, there is no curing shrinkage, allowing for continuous water stopping ■ A sense of security with abundant adoption results in both public and private sectors ■ Safe rodent prevention, also blocks rodent intrusion ■ A wide range of options to accommodate various situations ■ "Japan Quality" assurance and reliable quality ■ Ecology & Safety gentle to the Earth and humanity 【TOMETARO PAGE】 https://epj-inc.co.jp/page-tometaro.php *For details, please request a catalog via "Contact Us" or view the PDF data from "Download".

TometaroⓇ is a non-curing, polyolefin-based water stop putty for leak prevention and repair. It adheres firmly to resin, rubber, metal, and concrete, making it a versatile water stop material that can also be applied in flowing water conditions. It is suitable for leak prevention in electrical equipment handholes and cable/pipeline penetration areas. It is resistant to salt, acid, and alkali, and does not cure after opening, allowing for long-term storage within specified conditions. ◎ R2.6 Issued 'Guidelines for Flood Prevention Measures for Electrical Equipment in Buildings' ◎ <Features> ■ Heat resistance up to 90°C, stable water stop without yielding to high-pressure cables ■ Putty alone/water-tight performance of 0.05 MPa (with optional use, 0.15 MPa) ■ Can be used even during leaks (in flowing water) ■ Consideration for cable re-pulling, allowing for removal and re-filling ■ Unlike curing water stop materials, it has no curing shrinkage and can continuously stop water ■ A sense of security with a wealth of adoption results in both public and private sectors ■ Safe rodent prevention, blocking rodent intrusion ■ A wide range of options to accommodate various situations ■ "Japan Quality: NETIS Product" trusted quality ■ Ecology & Safety, friendly to people and the environment *For details, please request a catalog via "Contact Us" or view the PDF data from "Download"

TometaroⓇ is a non-curing, polyolefin-based waterproofing putty for leak prevention and repair. It adheres firmly to resin, rubber, metal, and concrete, making it a versatile waterproofing material that can also be applied in flowing water conditions. It is suitable for leak prevention in electrical equipment handholes and cable/pipeline penetration areas. It is resistant to salt, acid, and alkali, and does not cure after opening, allowing for long-term storage within specified conditions. ◎ R2.6 Issued "Guidelines for Flood Prevention Measures for Electrical Equipment in Buildings" ◎ <Features> ■ Heat resistance up to 90°C, stable waterproofing without yielding to high-pressure cables ■ Putty alone/waterproof performance of 0.05MPa (with options, 0.15MPa) ■ Usable even during leaks (in flowing water) ■ Consideration for cable re-entry, allowing for removal and re-filling ■ Unlike curing waterproofing materials, it does not shrink upon curing, allowing for continuous waterproofing ■ A sense of security with a wealth of adoption records in both public and private sectors ■ Safe rodent prevention, blocking rodent intrusion ■ A wide range of options to accommodate various situations ■ "Japan Quality: NETIS Product" trusted quality ■ Ecology & Safety, friendly to people and the environment *For details, please request a catalog from "Contact Us" or view the PDF data from "Download"

Non-drying polyolefin-based one-component water-stopping putty agent TometaroⓇ TometaroⓇ offers a proposal for "environmental control" against rodents. Structures have various environments that attract rodents (such as pipe penetration areas), and as long as these environments exist, rodent control will continue indefinitely. Therefore, we recommend "TometaroⓇ (water-stopping material)" for easy, safe, and highly sustainable pest control! After years of research, it has been proven to provide "water intrusion measures (waterproofing) - leak prevention and leak repair" along with "humane rodent control." <Features of Tometaro for Rodent Control> ■ "Basically no maintenance required" It does not contain any repellent chemicals. TometaroⓇ physically blocks the entry points. (This does not apply if there is already a history of rodent intrusion into the building.) ■ "Humane" Since no chemicals are used, there is no skin irritation during handling. ■ "Rodent control along with water intrusion measures (waterproofing)" TometaroⓇ, a non-hardening water-stopping putty agent originally developed for water intrusion measures, addresses both issues simultaneously. *For details, please request a catalog from "Contact Us" or view the PDF data from "Download"

Proposals for flood prevention measures and waterproofing construction in general, starting with the familiar water-stopping putty Tometaro. ■ The well-known non-drying polyolefin-based one-component water-stopping putty TometaroⓇ ■ Leakage prevention measures for underground beam penetration areas and FEP water-stopping method for exterior wall penetration areas ■ Two-component mixed liquid resin and curing waterproofing material Raksir-WG ■ Waterproof manhole covers (manhole lids) and machine hatches that withstand water pressure. We offer a variety of materials for flood prevention measures and waterproofing construction. *For details, please request a catalog from "Contact Us" or view the PDF data from "Download"

■Recently, our "Pipe-in-Sleeve," showcased at the JECA Fair 2025, is officially released with great anticipation.■ In the underground wall section (underground beam sleeve), we have pre-treated the PVC sleeve and the outer space (gap) of the FEP with "waterproof treatment" at the factory, making it prefabricated for the site. On-site, there is no need for cumbersome work; after installing the PIS, basically only joint connections are required. It ensures stable waterproofing! Achieving work efficiency and promoting flood prevention and water resistance. This is an innovative and advanced product for underground beam sleeve construction. <Features> ■ Excellent waterproof performance [Flood prevention and water resistance promotion] ■ Proposal for labor-saving at construction sites ■ Adaptable to individual project design specifications ■ Improved work efficiency, standardized quality, and enhanced maintainability [To Designers and Contractors] FEP pipe through-piping, bell mouth terminal installation, connection of different pipes (AQ type), and various connection parts of Eflex can be arranged according to the specifications of each construction site! Furthermore, it can also respond to unexpected water leaks! It combines maintenance and serviceability, making it a versatile and highly adaptable product. (Feel free to request drawings as well) *For details, please request a catalog from "Contact Us" or view the PDF data from "Download"

■Recently, our "Pipe-in-Sleeve," showcased at the JECA Fair 2025, is officially launched with great anticipation.■ In the underground wall section (underground beam sleeve), we have pre-treated the PVC sleeve and the outer space (gap) of the FEP with "waterproof treatment" at the factory, making it prefabricated for the site. No cumbersome work is required on-site; after the PIS installation, only joint connections are basically needed. Ensuring stable waterproofing! Achieving work efficiency and promoting flood prevention and water resistance. This is an innovative and advanced product for underground beam sleeve construction. <Features> ■ Excellent waterproof performance [Flood prevention and water resistance promotion] ■ Proposal for labor-saving at construction sites ■ Adaptable to individual design specifications of construction projects ■ Improved work efficiency, standardized quality, and enhanced maintenance [To designers and contractors] FEP pipe routing, bell mouth terminal installation, connection of different types of pipes (AQ type), and various connection parts of FEP can be arranged to fit the specifications of individual construction sites! Furthermore, it can also respond to unexpected leaks! It combines maintenance and serviceability, making it a versatile and highly adaptable product. (Feel free to request drawings) *For details, please request a catalog from "Contact Us" or view the PDF data from "Download"

Official release is just around the corner! Tometaro 2 ! For companies struggling with air and gas leakage issues, we will provide samples in accordance with our company regulations. Please feel free to contact us. <Features> ■ A sister product of the familiar non-hardening water stop material "Tometaro" The air and gas version putty used as a water stop material for flood prevention, adopted by both public and private sectors. ■ Heat resistance up to 90℃ Safe for the surface temperature of the target area, resistant to sagging. ■ Water tightness performance of 0.05MPa Can be repurposed as a water stop material for various leakage issues! ■ Japan Quality Manufactured in Japan. Quality you can trust and rely on. *For details, please request a catalog from "Contact Us" or view the PDF data from "Download"

When using the CAD data download, please check the following precautions in advance. From the moment you use the provided data, you are considered to have agreed to the following precautions. Thank you for your understanding. <Precautions> ◆ The CAD data is to be used solely for the purpose of considering the adoption of our products, and should not be used for any other purpose. ◆ The copyright and ownership of the CAD data are owned by EPJ Corporation, and you may not reuse (repurpose) the data in digital or print media without the consent of EPJ Corporation. Furthermore, please refrain from lending or transferring it to third parties. ◆ Please refrain from making any unauthorized modifications or alterations to the CAD data. ◆ Please be aware that we cannot be held responsible for any results arising from the use of the CAD data. ◆ The published data may be updated or deleted without prior notice due to product improvements or version upgrades. Thank you for your understanding.

When using the CAD data download, please check the following precautions in advance. From the moment you use the provided data, you will be considered to have agreed to the following precautions. Thank you for your understanding. <Precautions> ◆ The CAD data is to be used solely for the purpose of considering the adoption of our products, and should not be used for any other purpose. ◆ The copyright and ownership of the CAD data are owned by EPJ Corporation, and you may not reuse (repurpose) the data in digital or print media without the consent of EPJ Corporation. Furthermore, please refrain from lending or transferring it to third parties. ◆ Please refrain from making any unauthorized modifications or alterations to the CAD data. ◆ Please be aware that we cannot be held responsible for any results arising from the use of the CAD data. ◆ The published data may be updated or deleted without notice due to product improvements or version upgrades. Thank you for your understanding. *For details, please request a catalog through "Contact Us" and view the PDF data through "Download."

With the increase in building height and seismic resistance improvements, the width of beams has been increasing. - Increased amount of rebar (main bars and stirrups) in beams - Spread of high-strength concrete - Long-period and wind sway countermeasures - Increased load on beams due to the slimming of columns (design requirements) - Improved workability (especially with high-strength concrete) As a result of these factors, recent high-rise buildings show an increase in "beam width," particularly for underground beams, which tend to be significantly thicker, with widths exceeding 1,000 mm not being uncommon. Therefore, waterproofing work for the outer circumference of cable conduits penetrating through sleeves in underground exterior wall sections (underground beams) is extremely challenging. Due to the current shortage of construction workers and skilled labor, the waterproof performance of buildings is becoming increasingly unstable. Thus, we propose the following: **Application Scenarios** - Piping work for underground beams - Sleeve penetration work for exterior walls - Pulling through FEP pipes **Benefits of Implementation** - Significant reduction in construction time - Reduced burden on workers - Stabilization of quality - Decreased risk of water leakage

■Recently, our "Pipe-in-Sleeve," showcased at the JECA Fair 2025, is officially released with great anticipation.■ In the underground wall section (underground beam sleeve), we have pre-treated the PVC sleeve and the outer space (gap) of the FEP with "waterproof treatment" at the factory, making it prefabricated for the site. On-site, there is no need for cumbersome work; after installing the PIS, basically only joint connections are required. It ensures stable waterproofing! Achieving work efficiency and promoting flood prevention and water resistance. This is an innovative and advanced product for underground beam sleeve construction. <Features> ■ Excellent waterproof performance [Flood prevention and water resistance promotion] ■ Proposal for labor-saving at construction sites ■ Adaptable to individual project design specifications ■ Improved work efficiency, standardized quality, and enhanced maintainability [To Designers and Contractors] FEP pipe through-piping, bell mouth terminal installation, connection of different pipes (AQ type), and various connection parts of Eflex can be arranged according to the specifications of each construction site! Furthermore, it can also respond to unexpected water leaks! It combines maintenance and serviceability, making it a versatile and highly adaptable product. (Feel free to request drawings as well)

In the construction industry, there is always a demand for shorter construction periods and improved quality. In particular, the waterproofing treatment of the underground beam exterior wall is the most critical construction area for eliminating leakage risks and enhancing the safety of the building's power supply. Traditional methods often require complex waterproofing work on-site, leading to longer construction periods. However, the Pipe-in-Sleeve (PIS) system simplifies on-site work by prefabricating PVC sleeves and FEP pipes in the factory, contributing to shorter construction times. [Usage Scenarios] * Underground beam/exterior wall penetration * Underground penetration/power cable entry [Benefits of Implementation] * Labor-saving (reducing the burden on workers) * Shorter construction periods * Improved waterproof performance [For Designers and Contractors] FEP pull-through, bell mouth terminal installation, etc., can be customized to individual site specifications! Additionally, it can handle unexpected leaks! It is a versatile and highly adaptable product that also incorporates maintenance and serviceability. ● Be sure to check out the introduction video on YouTube, "Tome Taro Channel." * For more details, please request a catalog from "Contact Us," or view the PDF data from "Download."

[Coming Soon] An upgraded version of the beloved "Pipe-in-Sleeve"! "Pipe-in-Sleeve T-Type," abbreviated as PIS-T. In contrast to the PVC sleeve, a through pipe made of FEP has been pre-filled with waterproof material (sealant) at the factory, making it prefabricated. The T-type further features a "drainage PVC flange" welded with PVC material to the outer layer of the PVC sleeve. This method replaces the ring-shaped or band-shaped waterproof material on the outer circumference of the PVC sleeve, responding to strong requests from construction companies. <Features> ■ Excellent waterproofing due to prefabrication: Promotes flood prevention and water resistance ■ Labor-saving at construction sites! Reduces worker burden and prevents troubles in advance! ■ No skilled techniques required! Simplifies complex tasks! ■ Flexibility to accommodate individual design specifications of projects! ■ Improved work efficiency, standardized quality, and enhanced maintenance! [For Designers and Contractors] FEP pull-through, bell mouth terminal installation, etc., can be arranged according to individual site specifications! Additionally, it is equipped to handle unexpected leaks! A versatile and highly adaptable product that also incorporates maintenance and serviceability. *For details, please request a catalog from "Contact Us" or view the PDF data from "Download."

This is the record of adoption (delivery) for the well-known underground wall waterproof sleeve "Pipe-in-Sleeve." For underground wall sections, we apply "waterproof treatment" in advance at the factory to the outer space (gap) between the PVC sleeve and the FEP, and then prefabricate it for the site. There is no need for cumbersome work at the construction site; after installation, it basically requires only joint connections. It ensures measures against water ingress and waterproofing stability! Achieving work efficiency and labor-saving! <Features of Pipe-in-Sleeve (abbreviated as PIS)> ■ Excellent waterproofing through prefabrication: Promoting measures against water ingress and waterproofing ■ Labor-saving at construction sites! Reducing the burden on workers and preventing troubles in advance! ■ No skilled techniques required! Simplifying complex tasks! ■ Flexibility to accommodate individual design specifications of projects! ■ Improved work efficiency, standardized quality, and enhanced maintainability! [To Designers and Contractors] FEP pull-through, bell mouth terminal installation, etc., can be arranged according to individual site specifications! Furthermore, it is equipped to handle unexpected leaks! A versatile and highly adaptable product that also incorporates maintenance and serviceability. *For details, please request catalogs or other materials from "Contact Us" or view the PDF data from "Download."

[Coming Soon] An upgraded version of the beloved "Pipe-in-Sleeve"! 'PIS-T Type' The T type features a "drainage PVC flange" welded with the same material to the outer layer of the PVC sleeve, making it the ultimate solution for water intrusion prevention. In data centers, server downtime due to water intrusion can have serious impacts on business continuity, causing electrical shorts and equipment failures, which may lead to data loss and service interruptions. Our "Pipe-in-Sleeve T Type" is a prefabricated sleeve material! We propose a reliable water intrusion prevention solution to protect data centers from water! [Usage Scenarios] - Data center construction projects - Underground exterior walls with water intrusion risks - Locations where important information infrastructure needs protection [Benefits of Implementation] - Reduced risk of water intrusion - Shortened construction time and cost savings - Improved reliability due to high waterproof performance [For Designers and Contractors] FEP pull-through, bell mouth terminal installation, etc., can be customized to individual site specifications! Additionally, it can handle unexpected leaks! It also combines maintenance and serviceability, making it a versatile and highly adaptable product. *For more details, please request a catalog through "Contact Us" or view the PDF data via "Download."

[Coming Soon] An upgraded version of the "Pipe-in-Sleeve" that you have come to love! "Pipe-in-Sleeve T-Type," abbreviated as PIS-T In contrast to the PVC sleeve, a through pipe made of FEP has been pre-filled with waterproof material (sealant) at the factory, making it prefabricated. The T-type further features a "drainage PVC flange" welded with PVC material on the outer layer of the PVC sleeve. This method serves as an alternative to the ring-shaped or band-shaped waterproofing material on the outer circumference of the PVC sleeve, responding to strong requests from construction companies. <Features> ■ Excellent waterproofing through prefabrication: Promoting flood prevention and water resistance ■ Labor-saving at construction sites! Reducing the burden on workers and preventing troubles in advance! ■ No skilled techniques required! Simplifying complex tasks! ■ Flexibility to accommodate individual design specifications of projects! ■ Improved work efficiency, standardized quality, and enhanced maintenance! [For Designers and Contractors] FEP pull-through, bell mouth terminal installation, etc., can be arranged according to individual site specifications! Additionally, it is equipped to handle unexpected leaks! A versatile and highly adaptable product that also boasts maintenance and serviceability. *For details, please request the catalog from "Contact Us," or view the PDF data from "Download."

In recent years, there has been an increasing trend of intensified disasters such as typhoons. The Typhoon No. 19 in 2019 caused flooding in the underground electrical facilities of a tower mansion, leading to a prolonged disruption of infrastructure, which became a significant social issue. Since then, the flood prevention guidelines proposed by the national and local governments have recommended waterproofing measures for underground power supply facilities and entry points as essential. "Pipe-in-Sleeve (abbreviated as PIS)" involves waterproofing PVC sleeves and FEP pipes at the factory and prefabricating them, ensuring the sound waterproof performance of buildings while simplifying on-site work and contributing to shorter construction periods. 【Flood Prevention: Suggested Facilities】 * Public facilities (city halls, ward offices, police stations, libraries, etc.) * Hospitals and welfare facilities * Residential facilities (high-rise and medium/small scale apartments, etc.) * Transportation infrastructure facilities (railways, airports, highways, etc.) 【Flood Prevention: Suggested Applications】 * Underground beams/exterior wall penetration (underground penetration/power cable entry) <Implementation Effects> * Improved stable waterproof performance of buildings * Labor saving (reduction of worker burden) * Shortened construction period * For details, please request a catalog via "Contact Us" or view the PDF data from "Download."