MUマテックス List of Products and Services

"Slab Reset Concrete" is a super-fast-setting, high-durability sectional repair material for floor slab surface repairs. On-site, by simply mixing a specified amount of water with the packaged powder and dedicated aggregates, you can obtain a super-fast-setting sectional repair material with appropriate fluidity and good finish quality. Since it contains polymers, it has excellent adhesion to the structural concrete. It also boasts outstanding durability and weather resistance. 【Features】 ■ No bleeding or material separation ■ Cures quickly, allowing for early release in emergency repair work ■ Reinforced with special fibers ■ Excellent adhesion to structural concrete ■ Superior water tightness, salt resistance, and freeze-thaw resistance, suppressing carbonation *For more details, please download the PDF or feel free to contact us.

• Reinforcement and repair materials
• Premixed mortar
• cement

"Slab Reset Mortar" is a rapid-setting, high-durability repair material designed for the surface repair of floor slabs. On-site, by simply adding water and mixing, you can obtain a rapid-setting repair material with appropriate fluidity and good finishability. Additionally, because it contains polymers, it has excellent adhesion to structural concrete and is also highly durable and weather-resistant. 【Features】 ■ No bleeding or material separation ■ Cures quickly, allowing for early release in emergency repair work ■ Reinforced with special fibers ■ Excellent adhesion to structural concrete ■ Superior water tightness, salt resistance, and freeze-thaw resistance, suppressing carbonation *For more details, please download the PDF or feel free to contact us.

• Reinforcement and repair materials
• Premixed mortar
• cement

The product "Hoso Ace Eco Fast-Setting Type" that we handle is an injection material that reduces CO2 emissions during manufacturing by adding industrial by-products. Since the carefully selected raw materials are pre-mixed, you can obtain a uniform cement milk simply by mixing it with water on-site. Additionally, the addition of special admixtures has made it possible to achieve strength properties equivalent to conventional products. 【Features】 ■ CO2 emissions during manufacturing are reduced by approximately 40% due to the addition of industrial by-products ■ Demonstrates strength properties equivalent to conventional products ■ Curing time until traffic opening is about 1 day (excluding winter) ■ Compliant with the design guidelines of the East Japan, Central Japan, and West Japan Expressway Companies, Volume 1, Pavement Section, Semi-Flexible Pavement Design and Construction Manual 2-4-2 "Cement Milk" *For more details, please download the PDF or feel free to contact us.

• Paving Materials
• cement

The "Hoso Ace Eco Standard Type" is a premixed type of low-carbon semi-flexible pavement injection material developed by our company. By adding special admixtures, it has become possible to achieve strength properties equivalent to conventional products. Traffic can be opened within 3 days (excluding winter). 【Features】 ■ By adding industrial by-products, CO2 emissions during manufacturing are reduced by approximately 40%. ■ Exhibits strength properties equivalent to conventional products. ■ Curing time until traffic can be opened is about 3 days (excluding winter). ■ A stable semi-flexible pavement permeable cement milk can be produced simply by mixing the specified amount of mixing water on-site. *For more details, please download the PDF or feel free to contact us.

• Paving Materials
• cement

The "Hoso Ace Water Retention Type 80" is an injection material used in pavement structures to mitigate thermal environmental pollution, including the urban heat island phenomenon. As it is a premixed type product, it can be easily mixed with water on-site to obtain a cement milk suitable for water-retaining pavement. It can also be used as a 75% permeable water-retaining pavement injection material. 【Features】 ■ Exhibits a high water absorption rate of approximately 80% ■ Significantly suppresses surface temperature and has excellent durability ■ Can also be used as a 75% permeable water-retaining pavement injection material ■ Curing time until traffic can be opened is approximately 3 hours *For more details, please download the PDF or feel free to contact us.

• Paving Materials
• cement

We would like to introduce our product, "Hoso Ace Water Retaining Type 60." This is a premixed type of injection material for water-retaining pavement developed by our company. Since we use carefully selected raw materials in a premixed form, you can simply mix it with water on-site to obtain a uniform water-retaining cement milk for pavement. Our company offers a wide range of appropriate products with keywords such as longevity, labor-saving construction, aesthetics, and environmental conservation, which are required for future social infrastructure. 【Features】 ■ Suitable as a 100% permeable injection material for water-retaining pavement ■ Can accumulate a large amount of water with a maximum water absorption rate of about 60% ■ Expected to have sustained effects in suppressing surface temperature rise ■ Curing time until traffic can be opened is approximately 3 hours *For more details, please download the PDF or feel free to contact us.

• Paving Materials
• cement

The 'Hoso Ace Water Retention Type 40' is a premixed injection material for water-retaining pavement developed by our company. Since carefully selected raw materials are premixed, you can simply mix it with water on-site to obtain a uniform water-retaining cement milk for pavement. It also accommodates blast finishes, enhancing the landscape. [Features] ■ Achieves a compressive strength of approximately 4N/mm² (MPa) with a curing time of 3 hours ■ In addition to strength, it has a maximum water absorption rate of about 40%, making it effective as a water-retaining pavement ■ The maximum water absorption rate is between 40% and 45%, indicating its effectiveness as a water-retaining pavement *For more details, please download the PDF or feel free to contact us.

• Paving Materials
• cement

The "Hoso Ace Super Fast Hard Type" is an injection material developed by our company to simplify injection work at construction sites for semi-flexible pavements. Since carefully selected raw materials are pre-mixed, you can obtain a uniform cement milk on-site by simply mixing it with water. Curing is also good during injection work at low temperatures, such as during winter nights. 【Features】 ■ Achieves high strength: A bending strength of over 2.0 MPa can be obtained in 3 hours and over 4.0 MPa in 3 days / A compressive strength of over 35 MPa can be obtained in 7 days. ■ Curing characteristics at low temperatures: Curing is good even during injection work at low temperatures, such as during winter nights. ■ Shows stable fluidity and has good injectability into the pavement body. *For more details, please download the PDF or feel free to contact us.

• Paving Materials
• cement

We would like to introduce our semi-flexible pavement premixed injection material, "Hoso Ace Ultra Fast Hardening Type." This premixed type of semi-flexible pavement injection material was developed by our company to simplify the injection work at construction sites for semi-flexible pavements. Since we use carefully selected raw materials in the premix, you can obtain a uniform semi-flexible pavement cement milk by simply mixing it with water on-site. 【Features】 ■ Early traffic opening possible: Achieves a compressive strength of over 5MPa with a curing time of 3 hours ■ Curing characteristics at low temperatures: Curing is good even during injection work at low temperatures, such as winter nights ■ Complies with the design guidelines of the East Japan, Central Japan, and West Japan Expressway Companies, Volume 1, Pavement Section, Semi-flexible Pavement Design and Construction Manual 2-4-2 "Cement Milk" ■ Complies with the Japan Road Association's Pavement Construction Handbook 9-4-1 Semi-flexible Pavement "Permeable Cement Milk" *For more details, please download the PDF or feel free to contact us.

• Paving Materials
• cement

We would like to introduce our premixed injection material for semi-flexible pavement, "Hoso Ace Quick-Setting Type." Except during severe cold periods, the curing time until traffic can be opened is approximately 24 hours. As it is a premixed type, stable permeable cement milk can be produced simply by mixing the specified amount of mixing water on-site. 【Features】 ■ Curing time until traffic can be opened is approximately 24 hours (excluding severe cold periods) ■ Compliant with the design guidelines of the East Japan, Central Japan, and West Japan Expressway Companies, Volume 1 Pavement, Semi-Flexible Pavement Design and Construction Manual 2-4-2 "Cement Milk" ■ Compliant with the Japan Road Association's Pavement Construction Handbook 9-4-1 Semi-Flexible Pavement "Permeable Cement Milk" *For more details, please download the PDF or feel free to contact us.

• Paving Materials
• cement

The "Hoso Ace Standard Type" is a premixed injection material developed by our company to simplify injection work at construction sites for semi-flexible pavements. Since carefully selected raw materials are premixed, only water needs to be added on-site to obtain a uniform cement milk. The standard type allows for traffic to be opened within 3 days (excluding extremely cold periods). 【Features】 ■ Curing time until traffic can be opened is approximately 72 hours (excluding extremely cold periods) ■ Complies with the design guidelines of the East Japan, Central Japan, and West Japan Expressway Companies, Volume 1 Pavement Section, Semi-Flexible Pavement Design and Construction Manual 2-4-2 "Cement Milk" ■ Complies with the Japan Road Association's Pavement Construction Handbook 9-4-1 Semi-Flexible Pavement "Permeable Cement Milk" *For more details, please download the PDF or feel free to contact us.

• Paving Materials
• cement

"RWG-N" is a high-strength, fast-setting, non-shrink grout material for labor-saving tracks. It is a pre-mixed product made from Portland cement, aggregates, fast-setting materials, and admixtures. Just mix it with water to obtain the required grout. A filling rate of over 90% can be achieved even with non-vibrating natural flow, and its physical properties remain stable over the long term, exhibiting excellent durability and weather resistance. 【Features】 ■ Easy mixing work ■ Excellent fluidity ■ Rapid strength development ■ Excellent permeability ■ Outstanding durability *For more details, please download the PDF or feel free to contact us.

• grout
• cement

We would like to introduce our ultra-rapid hardening grout material 'LU-3' that we handle. It exhibits excellent fluidity, allowing it to fill even the smallest gaps adequately. Additionally, although it may vary slightly depending on the construction temperature, there is almost no change in fluidity over a period of 30 minutes after mixing. All materials are pre-mixed, so on-site, you only need to mix it with water to obtain the required grout. 【Features】 ■ Ultra-rapid hardening ■ Excellent fluidity ■ Easy mixing work ■ Outstanding durability *For more details, please download the PDF or feel free to contact us.

• grout
• Paving Materials
• cement

"MG-5" is an ultra-fast hardening filler for PCa pavement joints characterized by excellent fluidity. It is a premixed product that only requires mixing with water on-site to obtain the specified grout. Please feel free to contact us when you need it. 【Features】 ■ Easy mixing work ■ Excellent fluidity ■ Minimal bleeding ■ Rapid development of practical strength *For more details, please download the PDF or feel free to contact us.

• grout
• Paving Materials
• cement

"MG-1" is a super fast-setting grout material for floor panel bonding/rapid construction. Being a premixed type, it can be easily mixed with the specified amount of water on-site to obtain a stable mortar. Additionally, it has excellent fluidity, allowing it to fill even fine gaps. [Features] ■ Super fast-setting ■ Premixed ■ Excellent fluidity ■ Non-bleeding *For more details, please download the PDF or feel free to contact us.

• grout
• Reinforcement and repair materials
• cement

"MG-15M Hyper" is a high-strength, viscous non-shrink grout material of the premix type, which allows for stable grout to be obtained simply by mixing it with the specified amount of water on-site. It is a product that combines Portland cement, aggregates, and admixtures. It achieves a compressive strength of over 60 N/mm² at 28 days of age. It exhibits excellent fluidity, allowing it to fill fine sections adequately, and prevents the formation of voids between the grout material and the structure after curing, ensuring integrity. 【Features】 ■ High strength ■ Premixed ■ Moderate viscosity ■ Excellent fluidity ■ Non-bleeding *For more details, please download the PDF or feel free to contact us.

• grout
• Reinforcement and repair materials
• cement

The "MG-15M Super" is a high-strength, high-flow non-shrink grout material suitable for pouring construction, characterized by its high fluidity. It is a pre-mixed product containing Portland cement, aggregates, and admixtures, achieving a compressive strength of over 60 N/mm² at 28 days of age. Due to its pre-mixed nature, stable grout can be obtained simply by mixing it with the specified amount of water on-site. 【Features】 ■ High strength ■ Pre-mixed ■ Excellent fluidity ■ Non-bleeding *For more details, please download the PDF or feel free to contact us.

• grout
• Reinforcement and repair materials
• cement

The "MG-15MF" is a non-shrink mortar that is pre-mixed with Portland cement, aggregates, admixtures, and vinyl fibers. It incorporates vinyl fibers in the pre-mix, significantly improving crack resistance compared to conventional non-shrink grout. Additionally, it is effective in preventing spalling during impacts. Furthermore, as it is a pre-mixed type, stable grout can be obtained simply by mixing it with the specified amount of water on-site. 【Features】 ■ High crack resistance ■ Pre-mixed ■ Excellent fluidity ■ Non-bleeding *For more details, please download the PDF or feel free to contact us.

• grout

"MG-11M" is a super-fast-setting grout material for adjusting manhole covers, made from pre-mixed Portland cement, fast-setting materials, aggregates, and admixtures. Due to its ultra-fast setting properties, it allows for early demolding and is suitable for emergency repairs. Since all materials are pre-mixed, only water needs to be added on-site to create an optimal grout. Additionally, it exhibits excellent fluidity, allowing it to fill fine gaps adequately. Its physical properties remain stable over the long term, offering superior durability and weather resistance. 【Features】 ■ Ultra-fast setting ■ Easy mixing work ■ Excellent fluidity ■ Superior durability *For more details, please download the PDF or feel free to contact us.

• grout

The "MG-10MS" is a super fast-setting grout material for emergency construction, premixed with Portland cement, quick-setting materials, aggregates, and admixtures. Due to its super fast-setting properties, it is suitable for emergency construction and demonstrates excellent fluidity, allowing it to fill even fine gaps adequately. Additionally, since all materials are premixed, a suitable grout can be easily made on-site by simply mixing with water. 【Features】 ■ Super fast-setting ■ Excellent fluidity ■ Easy mixing work ■ Excellent durability *For more details, please download the PDF or feel free to contact us.

• grout

"U-Grout AG" is a grout material suitable for underwater construction in rivers, ports, and other aquatic environments, combining fluidity and underwater non-separation performance. It suppresses the generation of suspended solids, reducing the impact on both the working environment and the natural environment underwater. Mixing and pumping are possible with a grout slurry supply system. Additionally, it possesses high underwater non-separation performance and good fluidity, making it excellent for construction and filling. 【Features】 ■ Underwater non-separation performance ■ Workability and high filling capacity ■ Compatible with slurry supply systems *For more details, please download the PDF or feel free to contact us.

• grout

"U-Grout CT" is a non-polymer, high-performance non-shrink grout material that effectively suppresses the intrusion of chloride ions, making it suitable for repair and reinforcement work on port structures and other applications where resistance to salt damage is required. It has a high chloride ion penetration suppression effect, allowing for application in areas where salt damage is a concern. Additionally, its low heat generation contributes to excellent crack resistance. Furthermore, construction using the grout slurry supply system enables high-speed and large-volume placement. [Features] - Crack resistance - Salt damage resistance - Workability *For more details, please download the PDF or feel free to contact us.*

• grout

"U-Grout L" is a non-shrink grout material designed with a special formulation that suppresses hydration heat generation and enhances tensile strength, thereby improving crack resistance in large-scale construction such as thickening work. By controlling hydration heat generation, it can reduce temperature cracking. Its high tensile strength provides excellent crack resistance. Additionally, construction using a grout slurry supply system allows for high-speed and large-volume pouring. [Features] - Crack resistance - Low heat generation - Workability *For more details, please download the PDF or feel free to contact us.

• grout

"U-Grout M" is a low-heat, non-shrink grout material suitable for repair work on thick beams and columns due to its hydration heat suppression, as well as for seismic reinforcement work during the summer. Thanks to hydration heat suppression, it has excellent crack resistance and high flowability, ensuring fluidity even during summer construction. Additionally, construction using a grout slurry supply system allows for high-speed and large-volume pouring. 【Features】 ■ Low heat generation ■ Fluidity ■ Workability *For more details, please download the PDF or feel free to contact us.

• grout

"U-Grout RII" is a non-shrink mortar for filling that boasts high strength and excellent workability with high physical properties. It demonstrates its performance not only in general buildings but also in various construction applications in architecture and civil engineering. Additionally, being an all-premix product, high-quality grout material can be obtained simply by adding the specified amount of water and mixing on-site. [Features] - No material separation or bleeding, and no shrinkage during drying - Excellent fluidity, easily fills fine gaps - All premix - Does not use metallic aggregates, preventing rust formation *For more details, please download the PDF or feel free to contact us.

• grout

The "U-Grout Pad" is a non-shrink grout material that demonstrates its performance for foundations of machinery and other equipment that require high-precision installation, such as machine installation and steel frame installation. Since it is an all-premix type, high-quality grout can be obtained simply by adding water and mixing on-site. Additionally, by adjusting the amount of water, it can be tailored to the desired mortar hardness for specific applications. It minimizes load imbalance, enabling high-precision installation of machinery and steel columns. 【Features】 ■ Workability ■ Non-shrink ■ High precision *For more details, please download the PDF or feel free to contact us.

• grout

"U-Grout General Purpose" is a versatile non-shrink grout material suitable for various construction applications and pouring methods. It exhibits high strength and excellent adhesion. Due to its high flowability, it can fill spaces thoroughly. Additionally, construction using a slurry supply system allows for fast and large-scale pouring. 【Features】 ■ High strength and high adhesion ■ Fluidity ■ Workability *For more details, please download the PDF or feel free to contact us.

• grout

The "U-Grout" cement-based non-shrink grout slurry supply system mixes premixed powder at the construction site and provides the necessary amount of slurry to the customer. A dedicated operator mixes the fresh slurry and pumps it using a pump mounted on a truck, eliminating the need for traditional mixing efforts and equipment arrangements, significantly streamlining the construction process. Additionally, it allows for high-speed mixing and large-scale pouring at a rate of 2.5m³/h. Materials (powder) are delivered on the day of construction, and any leftover materials are taken back. 【Features】 ■ Shortened construction period ■ Safe and comfortable ■ Labor-saving ■ No leftover materials *For more details, please download the PDF or feel free to contact us.

• grout

The "MU Regist Method" is an inorganic surface coating method that protects concrete structures from various deterioration factors using a polymer cement mortar created by mixing water-based emulsion and pre-mixed powder. It suppresses the penetration of chloride ions and carbon dioxide into the concrete, thereby preventing deterioration due to salt damage and carbonation. It blocks the intrusion of water and oxygen into the concrete, suppressing the corrosion of rebar, and minimizes process losses in application quantity and construction frequency, allowing for cost reduction through shortened construction periods. 【Features】 ■ Suppresses the penetration of chloride ions and carbon dioxide into the concrete, preventing deterioration due to salt damage and carbonation. ■ Blocks the intrusion of water and oxygen into the concrete, suppressing the corrosion of rebar. ■ High crack-following ability against substrate cracking. ■ Minimizes process losses in application quantity and construction frequency, allowing for cost reduction through shortened construction periods. *For more details, please download the PDF or feel free to contact us.

• Concrete construction

"U-LC1 SFII" is a silane-based surface impregnation material used in the preventive maintenance method "MU LC Saver Method" for concrete structures. It allows for the application of the specified amount in a single coating process on both wall and ceiling surfaces, and due to its excellent impregnation performance and water absorption suppression effect, long-term salt prevention effects can be expected in coastal areas. Additionally, by applying the standard amount to the concrete surface in one coat, it demonstrates surface water repellency early on. 【Features】 ■ Enhanced sag resistance silane-based surface impregnation method ■ Allows for the application of the specified amount in a single coating process on both wall and ceiling surfaces ■ Demonstrates early surface water repellency by applying the standard amount to the concrete surface in one coat ■ Excellent impregnation performance and water absorption suppression effect, enabling long-term salt prevention effects in coastal areas *For more details, please download the PDF or feel free to contact us.

• Concrete construction

"U-LC1 RSII" is a silane-based surface impregnation material used in the preventive maintenance method for concrete structures called "MU LC Saver Method." It penetrates into the concrete to form a water-repellent layer, suppressing the intrusion of deterioration factors. It allows for the application of the specified amount in a single coating process on both wall and ceiling surfaces. Additionally, due to its excellent impregnation performance and water absorption suppression effect, long-term salt blocking effects are expected in coastal areas. 【Features】 ■ Enhanced anti-dripping silane-based surface impregnation method ■ Allows for the application of the specified amount in a single coating process on both wall and ceiling surfaces ■ By applying the standard coating amount to the concrete surface in one coat, it demonstrates water repellency early on ■ Long-term salt blocking effects are expected in coastal areas due to excellent impregnation performance and water absorption suppression effect *For more details, please download the PDF or feel free to contact us.

• Concrete construction

"U-LC-Kate" is a silicate-based surface impregnation material used in the "MU-LC-Saver method" for preventive maintenance of concrete structures. By applying it to the concrete surface, hydration products derived from silicates densify the concrete surface. Additionally, it is expected to have a filling effect on microcracks, leading to a reduction in lifecycle costs. 【Features】 ■ By applying it to the concrete surface, hydration products derived from silicates densify the concrete surface. ■ It is also expected to have a filling effect on microcracks, contributing to a reduction in lifecycle costs. *For more details, please download the PDF or feel free to contact us.

• Concrete construction

We would like to introduce 'U-Primer S', handled by MU Matex Co., Ltd. This product is an acrylic-based primer used as a water absorption adjustment material for the substrate in concrete structure cross-section repair work. It suppresses water absorption into the substrate and prevents dry-out. We offer two types: an 18kg square can and a 1.7kg poly can. Please feel free to contact us if you have any requests. 【Features】 ■ Water absorption adjustment material for the substrate in concrete structure cross-section repair work ■ Suppresses water absorption into the substrate and prevents dry-out ■ Available in two types: 18kg square can and 1.7kg poly can *For more details, please download the PDF or feel free to contact us.

• Concrete admixture

"U-Primer EP" is a two-component, solvent-free epoxy resin primer used for jointing new and old concrete, mortar, and as a base for repair work on cross-sections. Being solvent-free, it offers excellent safety and complies with the technical standards for water supply facilities set by the Ministry of Health, Labour and Welfare. Additionally, it exhibits superior performance after curing and demonstrates high strength. It does not affect the curing properties of mortar, polymer cement mortar, etc. 【Features】 ■ Solvent-free, ensuring excellent safety ■ Complies with the technical standards for water supply facilities set by the Ministry of Health, Labour and Welfare ■ Superior performance after curing, demonstrating high strength ■ Does not affect the curing properties of mortar, polymer cement mortar, etc. *For more details, please download the PDF or feel free to contact us.

• Concrete admixture

"U-Primer HD" is an acrylic-based primer used as a water absorption adjustment material for the substrate in concrete structure cross-section repair work. By using it as a finishing agent for repair materials, it suppresses the occurrence of initial cracks caused by rapid surface drying. Additionally, when applying mortar, it prevents dry-out by suppressing water absorption into the concrete substrate. 【Features】 ■ High permeability ■ Substrate reinforcement ■ Water absorption adjustment ■ Drying suppression *For more details, please download the PDF or feel free to contact us.

• Concrete admixture

"U-LN40" is a lithium nitrite aqueous solution that can be used as a rebar rust prevention paste by mixing it with "U-Paste P." By mixing it with the cross-section repair material "U-Repair Shot Thick Type," it is possible to suppress the rusting and progression of rebar. Additionally, when this product is directly applied to concrete, it penetrates and diffuses internally, allowing for expected rust prevention of rebar. 【Features】 ■ By applying directly to concrete, the nitrite ions (NO2-) in the solution react with iron ions (Fe2+) to regenerate a passive film, suppressing the occurrence and progression of rust. ■ Can be used as a cross-section repair material by mixing with "U-Repair Shot Thick Type." *For more details, please download the PDF or feel free to contact us.

• Rust Inhibitor

"U-Paste II" is a lithium nitrite-based polymer cement paste rust prevention material that mixes cement powder, lithium nitrite aqueous solution, and water. By applying it directly to rebar, the nitrite ions (NO2-) in the U-LN40 solution react with iron ions (Fe2+) to regenerate a passive film, suppressing the occurrence and progression of rust. When applied to a concrete substrate, the lithium ions (Li+) in the U-LN40 solution penetrate into the concrete, allowing for the expected "alkali recovery" of carbonated concrete. [Features] ■ Suppresses the occurrence and progression of rust ■ Expected alkali recovery of carbonated concrete *For more details, please download the PDF or feel free to contact us.

• Rust Inhibitor

『ホソーエースeco』は、当社従来品比で製造時のCO2排出量を約40％削減し、 脱炭素化の推進に貢献する半たわみ性舗装用プレミックス注入材です。 産業副産物と特殊混和剤を活用することで、環境負荷を抑えながらも 高い流動性と優れた強度発現性を実現しています。 「早強型」「普通型」の2タイプをラインアップしており、 用途や交通開放までの時間に応じて選択可能です。 【特長】 ■環境に配慮した半たわみ性舗装用プレミックス注入材 ■ホソーエース従来品と比較し、原材料由来のCO2排出量約40％減 ■原材料をプレミックス済みのため、現場での作業が容易 ■1日または3日で交通開放が可能 ※詳しくは資料をご覧ください。お問い合わせもお気軽にどうぞ。

• Paving Materials

"Armor #120P" is a polymer cement mortar-based leveling material that allows for a smooth finish of 1-2mm with ease. Being all premixed, it only requires mixing with water on-site, offering excellent water retention and making plaster finishing easy. Additionally, it has excellent adhesion to structural concrete, superior water tightness and salt resistance, and helps suppress carbonation. 【Features】 ■ All premixed, requiring only water mixing on-site ■ Excellent water retention and easy plaster finishing ■ Superior adhesion to structural concrete ■ Excellent water tightness, salt resistance, and suppression of carbonation ■ Excellent freeze-thaw resistance, durability, and weather resistance *For more details, please download the PDF or feel free to contact us.

• Mortar and plaster materials

"Armor #600" is a cement-based injection material that can be injected into cracks with a surface crack width of 0.2mm or more. Injection is performed using a low-pressure injection method and can only be used when the inside of the crack is in a moist state; it cannot be used when dry. Additionally, the composition of the hardened material is similar to the paste portion of concrete, providing excellent integrity. 【Features】 ■ Injection is performed using a low-pressure injection method ■ Can only be used when the inside of the crack is in a moist state ■ Cannot be used when dry ■ The composition of the hardened material is similar to the paste portion of concrete, providing excellent integrity *For more details, please download the PDF or feel free to contact us.

• cement

"Filstar US" is a joint repair material used in water facility repair methods such as the "MU Aqua Field Method." It can be applied not only to static joints but also to joints that move in the expansion and contraction direction. It is a non-bleed type of one-component elastic polyurethane resin, which also excels in workability. Additionally, it has high weather resistance and maintains stable performance over a long period even in exposed environments, making it suitable for applications such as concrete joints and induced joint areas. [Features] - Non-bleed type of one-component elastic polyurethane resin, excellent in workability - High weather resistance, maintaining stable performance over a long period even in exposed environments *For more details, please download the PDF or feel free to contact us.

• Reinforcement and repair materials

"U-Aquaface" is a polymer cement mortar that is highly resistant to abrasion and suitable for winter construction, used for surface coating and cross-section repair of concrete structures such as water supply facilities. By simply adjusting the mixing water amount, it can be tailored for cross-section repair or surface coating, allowing for a coating thickness of 5 to 30 mm in a single application. Additionally, it has very low shrinkage and stable dimensional changes, providing excellent crack resistance. 【Features】 - Can be applied by trowel or spraying, with good workability. - Allows for a coating thickness of 5 to 30 mm in a single application. - Exhibits very low shrinkage and stable dimensional changes, resulting in excellent crack resistance. - The penetrating effect of U-Primer HD strengthens deteriorated concrete substrates, ensuring stable adhesion. *For more details, please download the PDF or feel free to contact us.

• Mortar and plaster materials

"U-Ashitect AP" is a sulfuric acid-resistant repair material designed for corrosive environments such as sewage and drainage facilities. Being an all-premix type (single component), it only requires mixing with water on-site, offering excellent troweling workability, and allowing for a coating thickness of 20mm to be applied on walls in a single day. Additionally, it can be applied by spraying, has high resistance to sulfuric acid corrosion, and is well-suited for repairs in areas of sewage facilities where sulfuric acid corrosion is a concern. 【Features】 ■ All-premix type (single component), requiring only mixing with water on-site ■ Excellent troweling workability, allowing for a coating thickness of 20mm to be applied on walls in a single day ■ Can also be applied by spraying ■ High resistance to sulfuric acid corrosion, making it suitable for repairs in areas of sewage facilities where sulfuric acid corrosion is a concern *For more details, please download the PDF or feel free to contact us.

• Mortar and plaster materials

"U-Repair PF Free" is a cement-based repair material without fibers, developed for the internal repair of deteriorated concrete structures in water supply facilities. It is an all-premix type that can be mixed with water, allowing for application using either trowel or spray methods. Additionally, it is available in two types: one without polymer (resin) additives and one with polymer additives. Regardless of the presence of polymer additives, it has high adhesion strength and excellent compatibility with the substrate. 【Features】 ■ All-premix type that only requires mixing with water ■ Applicable using either trowel or spray methods ■ Available in two types: one without polymer additives and one with polymer additives ■ High adhesion strength and excellent compatibility with the substrate, regardless of the presence of polymer additives *For more details, please download the PDF or feel free to contact us.

• Mortar and plaster materials

"Armor #520" is a polymer cement mortar (cross-section repair material) that excels in pumpability and fillability. It has no bleeding and exhibits excellent adhesion to structural concrete, providing sufficient resistance to cracking and peeling. Additionally, it has excellent freeze-thaw resistance, good strength development, and outstanding durability and weather resistance. 【Features】 ■ Fully premixed, requiring only water to be added on-site ■ No bleeding and excellent adhesion to structural concrete ■ Provides sufficient resistance to cracking and peeling ■ Excellent water tightness and salt barrier properties ■ Suppresses carbonation *For more details, please download the PDF or feel free to contact us.

• Mortar and plaster materials