MUマテックス List of Products and Services

The "SL Flow G" is a system that mixes powder on-site and delivers only the necessary amount to the customer. While maintaining workability, it thoroughly improves the shrinkage rate, which is a cause of cracking in cement-based products, achieving a significant reduction to about one-third of the quality standard value. The dedicated delivery truck is equipped with a pump and hose, making it efficient as there is no need to arrange for a mortar pump on-site. 【Features】 ■ Powder is mixed on-site ■ Only the necessary amount is delivered to the customer ■ Light foot traffic is possible approximately 4 hours after application (standard period) ■ Early application of finishing materials is achieved ■ No excess or shortage of materials, making it economical *For more details, please refer to the PDF document or feel free to contact us.

The "SL Sheet" method allows for the installation of SL materials simply by applying the sheet, even under substrate conditions where adhesion cannot be expected. This method not only shortens construction time but also addresses environmental concerns by resolving issues such as noise, dust, and industrial waste that were unavoidable with conventional methods. It enables the pouring of SL materials without the need to remove existing finishing materials, which had previously been a bottleneck. By omitting the primer application process, it significantly reduces the construction period. 【Features】 ■ Allows for the pouring of SL materials without removing existing finishing materials that were previously a bottleneck ■ Demonstrates excellent effectiveness as a neighbor-friendly method that maximally considers the environment ■ Adheres regardless of the type of substrate, while also adding waterproofing performance to the sheet ■ Does not require specialized skills for construction as it does not use special tools *For more details, please refer to the PDF document or feel free to contact us.

"Floor Leveler G" is a cement-based self-leveling material that creates a flat floor simply by mixing with water and leveling with a trowel. It is a fast-setting and fast-drying type. It accommodates installation thicknesses of 8 to 50 mm. It is suitable for new construction and repair work as a substrate adjustment material for concrete floors in general buildings, apartments, schools, and hospitals. 【Features】 ■ High Quality - Maintains workability while significantly reducing shrinkage rate - About 1/3 of the quality standard value ■ Fast Setting - Achieves remarkable fast setting compared to conventional products - Light foot traffic possible approximately 4 hours after installation (standard period) ■ Shortened Construction Period - Faster reduction in moisture content compared to conventional products - Enables early application of finishing materials *For more details, please refer to the PDF document or feel free to contact us.

"Tough Leveler G+" (for thin applications) is a high-performance cement-based self-leveling material specifically designed for indoor use, applicable to floor substrates subjected to heavy loads. It can also be applied to various finishing materials such as floor coatings and coverings. It is suitable for base finishing as well. 【Features】 ■ New product compatible with thin applications ■ No compromise in physical properties compared to the conventional Tough Leveler G Plus ■ Applicable for heavy load floors and coated floor finishes ■ Achieves installation of covering materials in as little as 6 hours, contributing to shortened construction periods ■ Can be finished without additional materials while maintaining durability *For more details, please refer to the PDF document or feel free to contact us.

"TAF Leveler G + Dustproof" is a flooring finish material that combines self-leveling material and dustproof paint into one product. It has wear resistance similar to water-based acrylic dustproof paint and significantly reduces the risk of peeling and blistering of the painted surface, which has been a traditional issue. It eliminates the need for flooring installation, allowing for a simple floor that is close to dustproof painting. By reducing the painting process, it simultaneously achieves a shorter construction period and lower total costs. It also helps mitigate the risk of defects and reduce overtime, making it effective in addressing the challenges of the 2024 problem. As a self-leveling material that balances work efficiency and quality, it can be used in logistics facilities and factories. 【Features】 Wear Resistance: Provides wear resistance similar to water-based acrylic dustproof paint. Impact Resistance: By combining self-leveling material and dustproof paint into one product, it avoids the risk of peeling and blistering at the interface caused by painting. Shortened Construction Period: Can be used as a finishing material, eliminating the need for dustproof painting work. Walkable in as little as 2.5 hours. *For more details, please refer to the materials available for download in the catalog. Feel free to contact us with any inquiries.

The cement-based self-leveling material "Tough Leveler G Plus" is a flooring substrate that contributes to shortening construction periods due to its excellent quick-drying properties. By using dedicated delivery trucks, it also achieves reductions in labor and logistics costs on-site, further contributing to shortened construction periods and helping to address the 2024 issue. In environments above 20°C, light foot traffic can be permitted in as little as 2 hours, and the installation of finish materials can be achieved in as fast as 6 hours (with a thickness of 10mm and humidity at RH 65%). It possesses high dimensional stability and strength, making it suitable for load-bearing floors and coated floor finishes. It is compatible with various finishing materials and can also be finished to a raw surface. It has durability that can withstand loads from AGVs (automated guided vehicles) and heavy machinery, and it is compatible with various finishing materials while also allowing for raw surface finishing. 【Features】 - Load-bearing capacity (suitable for harsh environments such as factories, warehouses, and hospitals) - Smoothness (ideal for data centers where precision is required for installing AGVs and precision equipment) - Compatibility with diverse finishing materials (substrate for coverings, tile substrates, coated floor substrates, raw surface finishing, etc.) - High wear resistance and surface strength, demonstrating excellent durability *For more details, please refer to the materials. Feel free to contact us with any inquiries.