MUマテックス List of Products and Services

The "SL Flow G" is a system that mixes powder on-site and delivers only the necessary amount to the customer. While maintaining workability, it thoroughly improves the shrinkage rate, which is a cause of cracking in cement-based products, achieving a significant reduction to about one-third of the quality standard value. The dedicated delivery truck is equipped with a pump and hose, making it efficient as there is no need to arrange for a mortar pump on-site. 【Features】 ■ Powder is mixed on-site ■ Only the necessary amount is delivered to the customer ■ Light foot traffic is possible approximately 4 hours after application (standard period) ■ Early application of finishing materials is achieved ■ No excess or shortage of materials, making it economical *For more details, please refer to the PDF document or feel free to contact us.

• cement

The "U-Repair Shot Thick Application Type" is a spray-applied polymer cement mortar that enhances adhesion to the underlying concrete. It excels in thickness application, allowing for installation of up to 80mm on walls and 40mm on ceilings. It can be applied using both spray and trowel methods. Additionally, it has very low shrinkage and stable dimensional changes, making it highly resistant to cracking. 【Features】 ■ All-premix type (one-component) ■ Just mix with water on-site ■ Allows for installation of up to 80mm on walls and 40mm on ceilings ■ Applicable for both spray and trowel methods ■ Excellent crack resistance *For more details, please refer to the PDF document or feel free to contact us.

• Mortar and plaster materials

The "U-Repair Shot" is a spray-applied polymer cement mortar of all-premix type that excels in adhesion. Thanks to the wet spray application method, it generates minimal dust and rebound, allowing for a single application thickness of up to 50mm on walls and 30mm on ceilings. With the function of a special acrylic powder polymer, it exhibits high adhesion performance with the substrate concrete immediately after spraying. 【Features】 ■ All-premix type that only requires mixing with water on-site ■ Minimal dust and rebound due to the wet spray application method ■ Allows for trowel finishing using a wet spray application method without quick-setting materials ■ Low hardening shrinkage after spraying ■ Excellent dimensional stability *For more details, please refer to the PDF document or feel free to contact us.

• Mortar and plaster materials

The "U-Repair Patch AP" is an all-purpose type polymer cement mortar designed for cross-section repair, focusing on ease of use on-site. It demonstrates stable performance simply by mixing with water. It has excellent troweling workability, allowing for a coating thickness of 40mm on walls in just one day. Additionally, it has very low shrinkage, stable dimensional changes, and is reinforced with special fibers, making it highly resistant to cracking. 【Features】 ■ Just mix with water on-site ■ Excellent troweling workability, allowing for a coating thickness of 40mm on walls in just one day ■ Spraying application is also possible ■ Very low shrinkage and stable dimensional changes ■ Highly resistant to cracking due to special fiber reinforcement *For more details, please refer to the PDF materials or feel free to contact us.

• Mortar and plaster materials

The "Waterproof Sheet for Roof Underlayment" is a modified asphalt waterproof sheet that excels in durability and water tightness. We offer a range of products including the one-sided adhesive type "Aqua Cut," which features an excellent modified asphalt adhesive layer, the non-adhesive three-layer type "Aqua Roofing," and the one-sided adhesive type "Waterproof Soundproof Sheet." 【Aqua Cut Features】 ■ Has an excellent modified asphalt adhesive layer ■ Good adhesion to the substrate ■ Has a brittleness temperature below -20°C ■ Remains sufficiently flexible even at low temperatures ■ Excellent followability to complex movements and cracks in the substrate *For more details, please refer to the PDF materials or feel free to contact us.

• Waterproof sheet

The "Design U Frame Method" is a seismic reinforcement technique that involves attaching reinforced concrete reinforcement frames to the exterior of existing reinforced concrete and steel-reinforced concrete structures. As an external type and using frames (columns and beams) without braces, it allows construction to proceed while the building is in use. It is suitable for apartments, hotels, commercial facilities, hospitals, and office buildings that prioritize access to balconies, natural light from windows, and exterior design. 【Features】 ■ Slender reinforcement members ■ Exterior design ■ Reinforcement while in use ■ Low cost ■ Flexible *For more details, please refer to the PDF materials or feel free to contact us.

• Special Construction Method

The "Design Fit Method" is a seismic reinforcement method that can be designed and constructed similarly to conventional methods, achieving shortened construction periods, improved construction environments, and cost reductions. In steel brace seismic reinforcement work, it significantly reduces the labor involved in anchor work, which generates noise and dust. Additionally, by adding a reinforced concrete framework to the existing building framework and installing braces within the added framework, it allows for complete external installation and can accommodate reinforcement work while the building is in use. 【Features】 ■ Design and construction similar to conventional methods ■ Shortened construction period ■ Reduced on-site work ■ Less noise and dust ■ Abundant design variations *For more details, please refer to the PDF materials or feel free to contact us.

• Special Construction Method

"Chloroguard" is an admixture that can be used by replacing a specified amount of binding materials such as cement, resulting in high-durability concrete with excellent resistance to chloride ion penetration. In addition to resistance to chloride ion penetration, it enables the production of concrete with superior compressive strength, reduced drying shrinkage characteristics, and excellent resistance to freeze-thaw cycles. It contributes to the longevity of structures, enhances durability, and reduces life cycle costs. 【Features】 ■ Improved resistance to chloride ion penetration ■ Increased compressive strength ■ Reduced drying shrinkage ■ Enhanced freeze-thaw resistance ■ Suitable for structures requiring high resistance to chloride ion penetration *For more details, please refer to the PDF materials or feel free to contact us.

• Concrete admixture

The "UBE Resin Coating Method" is an inorganic surface coating method that protects concrete structures from various deterioration factors using a polymer cement mortar created by mixing water-based emulsion and premixed powder. It can be used for surface coating and protection of civil engineering structures such as bridges, tunnels, and river and harbor facilities. 【Features】 - Suppresses the penetration of chloride ions and carbon dioxide into the concrete, reducing deterioration due to salt damage and carbonation. - Blocks the intrusion of water and oxygen into the concrete, inhibiting the corrosion of reinforcing steel. - High crack-following ability against substrate cracking. - Reduces process loss in application quantity and number of construction times, enabling cost reduction through shortened construction periods. *For more details, please download the PDF or feel free to contact us.

• Renovation and repair methods