滝本技研工業 List of Products and Services

At Takimoto Giken Kogyo Co., Ltd., we can handle rubber cutting and three-dimensional processing. (Data provision) Rubber processing may have issues such as machine tolerances not being met or burrs appearing, so discussions are necessary. For industrial machinery related to the automotive sector, there are various shapes for workpieces depending on the design, but we can get as close to your requirements as possible through machining. We perform 3D machining by creating 3D data from drawings using CADCAM. (If you have 3D data, please provide it.) We can also produce small lots, starting from just one piece. We can accommodate repeat orders from single items as well. For companies, we strive to flexibly respond to various conditions and meet diverse requests, such as payment terms or the absence of drawings. We have been in operation since our founding in 1971. We deeply appreciate the support of our users, which has made this possible. We look forward to your continued patronage. *For more details, please refer to the PDF materials or feel free to contact us.

• others

At Takimoto Giken Kogyo Co., Ltd., we manufacture holders made of plastic resin through cutting processes. Due to the 3D shapes and thin-walled processing, specialized machining techniques are required. For industrial machinery related to the automotive sector, there are various shapes of holders depending on their design, and we can customize them as closely as possible to your requirements through machining. MC Nylon (Monomer Cast Nylon) is commonly used in areas where mechanical strength (impact resistance) is necessary, and the material itself comes in various grades, making it versatile for general use. Using machining (Mori Seiki), we create 3D data from drawings using CADCAM for three-dimensional processing. (If you have 3D data, please provide it.) We are flexible in accommodating your company's payment terms, direct shipping, and custom products based on actual items. We can accept mass production items (high quantity) that result in a higher total amount, but we also handle small lots (low quantity) that are often difficult to accept elsewhere. Since our establishment in 1978, we have specialized in processing plastic resin. We will continue to strive to meet the needs of our users. *For more details, please refer to the PDF materials or feel free to contact us.

• others

Due to the characteristics of the material, the strength of plastic resin screws tends to be insufficient, but by using inserts (Ensat), it is possible to enhance the strength and manufacture them. The poka-yoke pins for the automotive-related industrial machinery come in various shapes depending on their design, but we can closely match your desired conditions and shapes by utilizing machining techniques. [About Our Processing] ■ General Lathe Processing (Mori Seiki) This is used for simple lathe-processed items, finishing processes, and chamfering of processed products that do not require programming. ■ About the Material POM (Delrin, Polyacetal) is a well-balanced material among engineering plastics and is relatively inexpensive, often compared to MC nylon. ■ Abundant Inventory By maintaining a rich inventory of materials, we can respond even when material manufacturers are unable to ship. ■ Strengths Unlike metals, plastic resin materials are generally procured in standard lengths, so there are not many manufacturers like ours that have a rich supply of materials. *For more details, please refer to the PDF document or feel free to contact us.

• others

At Takimoto Giken Kogyo, we manufacture and process nameplates, name tags, name plates, display boards, signs, and labels. We create these using engraving (letter carving) and cutting sheets (letter sheets). We handle a variety of text-related items, from sign-related products to nameplates ("name tags"). We produce items tailored to various conditions, such as name tags for new employees and name tag holders for events. Of course, we can also engrave and add color to fixtures related to equipment, so we can broadly accommodate needs such as poka-yoke for equipment attachment and detachment, and marking check fixtures. *For more details, please refer to the PDF document or feel free to contact us.

• others

At Takimoto Giken Kogyo, we accommodate additional processing for Misumi products (HIPA). ◆ Processing details: Finishing the outer circumference of insulation plates + hole processing If you provide the Misumi model number, we will carry out additional processing. We can handle additional processing of molded products from insulation plates, as well as assembly after processing or components made by Misumi only. Additionally, we accept additional processing of plastic (resin) cases made by Takachi Electric Industrial, handles made by Takigen, gears made by Kohara Gear Industry (KHK), and gears made by Kyouiku Gear Industry, among others, using plastic resin materials. *Some conditions apply Our company processes simple plate items (sheet materials) using general-purpose milling (Makino) on general machines that do not require the hassle of program creation. We flexibly accommodate payment terms for companies, direct shipping, and custom-made products based on actual items. We can accept mass-produced items (large quantities) with a higher total amount, but we also handle cases where small lots (small quantities) are not easily accepted.

• others

Processing of plastic resin with collets is suitable for preventing scratches (defects) on the workpiece. While the precision is slightly lower compared to metals, changing the material for the finishing area’s chucking helps prevent scratches. The world of plastic resin differs from that of metals, primarily in that tolerance areas are often ambiguous, leading to a temperature gap with manufacturers handling metal processed products. Therefore, our company pays careful attention to processing from material cutting to ensure that tolerances, distortion, and warping are minimized for industrial machinery and inspection jigs related to the automotive industry. [About Our Processing] ■ NC Lathe Complex Processing (Okuma) In cases where indexing processing is frequent, we use a 4-axis processing machine, which eliminates the need for clamps and positioning jigs. ■ Inspection Method We check the received drawings with a check mark and record actual measurements for areas with tolerances. ■ Material POM (Duracon, Polyacetal) is a well-balanced material among engineering plastics and is often compared to MC nylon due to its cost-effectiveness. *For more details, please refer to the PDF document or feel free to contact us.

• others

This is a "plastic resin block" that can be used as educational materials, training resources, and design reference materials. By seeing and touching the block, users can understand the characteristics of the material and its heat resistance temperature. It is designed with the goal that new employees, young staff, and even veteran employees who may feel hesitant to ask can gain a certain level of understanding by seeing and touching it. Currently, it is being utilized by various companies related to equipment and design, serving as a catalyst for material selection. If you have requests for production using different materials, we can generally accommodate them, so please feel free to contact us. (Additional costs may apply.) *For more details, please refer to the PDF document or feel free to reach out to us.

• others

At Takimoto Giken Kogyo, we accommodate additional processing of the Misumi product 'Lenny (Nylon Glass-Filled) Cap Bolt.' 【About the Processing Machines】 ■ General-purpose milling (Makino) For simple plate processing (sheet materials), we handle items with general-purpose machines that do not require much effort in program creation. Additionally, we can accommodate various items such as insulation boards, gears (manufactured by KHK), plastic cases (manufactured by Takachi), etc. We can also handle additional processing of molded products from insulation boards and assembly after processing. ● When making requests, please specify the Misumi model! * For automotive-related processing of various supplied parts, we apologize, but the finishing will be based on the supplied parts, and there may be cases where discussions regarding conditions are necessary. * We can manufacture from small lots of 1 piece. Repeat orders can also be accommodated from single items. * By responding quickly to issues such as missed arrangements or tool damage, we aim to minimize risks and get closer to your requests. * For more details, please refer to the PDF materials or feel free to contact us.

• others

At Takimoto Giken Kogyo, we process positioning jigs called "Work Guides" using plastic resin. By mounting and using the Work Guide as a base, we simplify the positioning of the workpiece. The "Work Guide" for industrial machinery related to the automotive sector often has relatively simple shapes, allowing for production with short lead times and low costs. [About Our Processing] ■ Machining (Mori Seiki) We use CADCAM to create programs and processing conditions with a sense of speed. (If 2D data is available, please provide it.) ■ Material MC Nylon (monomer cast nylon) is commonly used in areas requiring mechanical strength (impact resistance) and is generally easy to obtain, making it widely used. ■ Lead Time Depending on the processing shape and material, we can get as close as possible to your desired lead time. ■ Strengths Unlike metals, plastic resin materials are generally arranged in standard lengths, so there are not many manufacturers like ours that have a rich supply of materials. *For more details, please refer to the PDF document or feel free to contact us.

• others

At Takimoto Giken Kogyo, we process Valqua's 'PTFE with Carbon (Teflon)' from round materials. We take into consideration the conditions such as tolerances, distortion, warping, and burrs, which are weaknesses of plastic resins, to get as close as possible to the desired specifications. However, due to the material properties, production is made to order, which may result in longer delivery times. (The same applies to glass-filled Teflon.) [About Our Processing] ■ Machining (Mori Seiki) + NC Lathe Combined Processing (Okuma) If there is a delay in clamping or positioning, we will use both NC machines for processing. ■ About the Material Special nozzles for the automotive-related industrial machinery often require thin-walled processing, making them quite challenging, and the materials are selected based on the application. Additionally, PTFE (Teflon, Naflon, Valflon) is an excellent material for chemical resistance, but it has significant variations in dimensional tolerances, and care must be taken as the dimensions can change simply by measuring with the bare hand during inspection. * Carbon and glass fillers are made to order. * For more details, please refer to the PDF document or feel free to contact us.

• others

At Takimoto Giken Kogyo, we process Quadrant Polypenco's 'MC602ST (heat-resistant nylon)'. The "positioning pins" for industrial machinery related to automobiles are often relatively simple in shape, but they can have many tolerances. In such cases, we will respond with machining that takes into account the characteristics of the material and aims to meet your requested conditions as closely as possible. Additionally, for special grades of MC nylon, prices can be high if the processing manufacturer does not have stock. However, our company has a rich inventory of materials, allowing us to respond even when the material manufacturer is unable to ship. [About Our Processing] ■ NC Lathe Composite Processing (Okuma) When processing can be done with one chuck, we use a 4-axis machining method that does not require clamps or positioning jigs. ■ Material MC nylon (monomer cast nylon) is often used in areas where mechanical strength (impact resistance) is required, and the heat-resistant grade tends to be more expensive due to lower availability. Our company can accommodate high-volume production items that result in a higher total cost, but we also support those who are struggling to find acceptance for small lots. *For more details, please refer to the PDF document or feel free to contact us.

• others

At Takimoto Giken Kogyo, we process jet nozzles using "paper-filled Bakelite (phenolic resin)" manufactured by Onuma Seisakusho. However, due to the presence of paper, it is characterized by a high incidence of defects, making it unsuitable for complex shapes. Additionally, jet nozzles for industrial machinery often have complex shapes, so if jigs or 4-axis/5-axis machining are required, the product price tends to increase. [About Our Processing] ■ Machining (Mori Seiki) + NC Lathe Processing (Okuma) For processes such as indexing and screw machining, we use a method that does not require clamps or positioning jigs on a 4-axis machining center. ■ Material Paper-filled Bakelite (PL-PEM) is a phenolic resin with a paper-filled substrate, but due to its laminated structure, it is prone to defects and cracks, making it less suitable for complex shapes. ■ Response For items needed immediately after a holiday, we will do our best to accommodate requests by utilizing weekends and holidays with a shift system. We can also handle items with large production volumes and shift to a mass production system. *For more details, please refer to the PDF document or feel free to contact us.

• others

At Takimoto Giken Kogyo, we handle machining of Toray's heat-resistant plastic resin PEEK. Super engineering plastics for the automotive-related industrial machinery often have complex shapes, but we strive to meet your requests as much as possible through machining. If there is a delay in clamping or positioning, we utilize both NC machining machines to address the issue. For mass production items, we enhance efficiency and respond to cost and short delivery times by effectively managing machine operating rates and adjusting shifts. =Helpful Information= PEEK is one of the super engineering plastics and is often used when current materials do not meet satisfaction. Due to its high heat resistance and chemical resistance, the material is also quite expensive. *For more details, please refer to the PDF document or feel free to contact us.*

• others

At Takimoto Giken Kogyo, we process inspection measurement jigs (check pins and check blocks) using plastic resin. Because they are made of resin material, there is no worry about scratching the workpiece. In our company, we pay careful attention to processing from the cutting of materials to ensure that the check jigs for automotive-related industrial machinery have minimal tolerances, warping, and distortion. Additionally, we can produce small lots starting from one piece, and we can accommodate repeat orders from single items. By inspecting the difficulty of handling, we aim to reduce the defect rate and ultimately meet your requirements. 【About Our Processing】 ■ NC Lathe Composite Processing (Okuma) In cases where indexing processing is frequent, we use a 4-axis processing machine that does not require clamps or positioning jigs. ■ Material POM (Duracon, Polyacetal) is a well-balanced material among engineering plastics and is often compared to MC nylon due to its cost-effectiveness. ■ Inspection By inspecting the difficulty of handling, which does not show up in numbers, we aim to reduce the defect rate and ultimately meet your requirements. *For more details, please refer to the PDF document or feel free to contact us.

• others

At Takimoto Giken Kogyo, we process "Driver Guides (Bit Guides)" using plastic resin. Driver Guides are used in cell-type assembly jigs. Additionally, Driver Guides (Bit Guides) for the automotive-related industrial machinery often have relatively simple shapes, allowing for production in a short lead time and at a low cost. Our company can manufacture from a small lot of just one piece, and we can also accommodate repeat orders starting from a single item. 【About Our Processing】 ■ General Lathe Processing (Mori Seiki) / General Milling (Makino) We use simple lathe and milling processing for items that do not require programming, such as basic machining and finishing processes like chamfering. ■ Material MC Nylon (Monomer Cast Nylon) is commonly used in areas requiring mechanical strength (impact resistance) and is widely utilized due to its easy availability. By responding to short lead times, we aim to help mitigate customer risks such as missed arrangements or jig damage, which are often difficult to prevent. *For more details, please refer to the PDF document or feel free to contact us.

• others

At Takimoto Giken Kogyo, we manufacture "screw bolts" using PEEKCF30 (carbon fiber reinforced PEEK) made by Ensinger. Since we have a 4-axis machining center, we can also handle processing in-house. Additionally, screws for industrial machinery related to the automotive industry can experience tolerances, warping, and distortion, so we pay careful attention to processing from the cutting of the material. [About Our Processing] ■ NC Lathe Complex Processing (Okuma) For processes such as indexing and screw machining, we use a method that does not require clamps or positioning jigs on our 4-axis machining center. ■ Material PEEK is one of the super engineering plastics and is often used as a substitute when the material currently in use does not meet satisfaction. It is mainly known for its high heat resistance and chemical resistance, and due to its high functionality, the price is also quite high. Special grades can be even more expensive. ■ Support We can accommodate mass production. We can also handle items with large production numbers and shift to a mass production system. Furthermore, even if something is needed immediately after a holiday, we operate on a shift rotation system to do our utmost to meet your requests, utilizing Saturdays, Sundays, and holidays. *For more details, please refer to the PDF document or feel free to contact us.

• others

At Takimoto Giken Kogyo, we process PCTFE (Daifuron) fluororesin from bar stock. For insulation-related applications in industrial machinery for the automotive sector, there are various shapes available, but we can get as close as possible to your requirements through machining. Furthermore, for small lots, it is common to process R shapes that do not have standard specifications using NC machining, which does not incur tool costs unlike general-purpose machines. = Useful Information = PCTFE (Daifuron) fluorine-based materials are prone to tolerances, warping, and distortion, making them expensive and limiting their usage to specific applications. Additionally, unlike metals, plastic resin materials are generally supplied in fixed lengths, so there are not many manufacturers like ours that have a rich inventory of materials. *For more details, please refer to the PDF document or feel free to contact us.*

• others

At Takimoto Giken Kogyo, we offer engraving, carving, and lettering processing on plastic resins, as well as coloring services. By engraving part numbers (models) and color coding or engraving model numbers, we help prevent mistakes and errors during work, serving as a poka-yoke for jigs. We flexibly accommodate corporate payment terms, direct shipping, and processing of products made from actual items or without 3D CAD data. Additionally, unlike metals, plastic resin materials are generally supplied in standard lengths, and there are not many manufacturers like ours that have a rich supply of materials. Please feel free to consult with us! 【About Our Processing】 ■ Machining (Mori Seiki) We create 3D data from drawings using CADCAM for 3D processing. (If you have 3D data, please provide it.) ■ Material MC Nylon (monomer cast nylon) is often used in areas requiring mechanical strength (impact resistance) and is commonly used due to its easy availability. *For more details, please refer to the PDF document or feel free to contact us.

• others

At Takimoto Giken Kogyo, we process the plastic resin sliding grade "MC703HL" from bar stock. Pins for industrial machinery related to the automotive sector often have relatively simple shapes and can generally be produced with short lead times and at low prices. Depending on the processing shape and material, we can get as close as possible to your desired delivery date. For items needed immediately after a holiday, we can accommodate by utilizing weekends and holidays. *For special materials, if there is no stock available, lead times may be longer. [About Our Processing] ■ NC Lathe Complex Processing (Okuma) In small lots, we often process R shapes that do not have standard products through NC processing, which does not incur tool costs unlike general-purpose machines. ■ Material MC Nylon (Monomer Cast Nylon) is commonly used in areas requiring mechanical strength (impact resistance) and is generally easy to obtain, making it widely used. *Special materials may need to be ordered. *For more details, please refer to the PDF materials or feel free to contact us.

• others

At Takimoto Giken Kogyo, we offer processing of MC Nylon 501CDR6 round bars. You can also leave the processing of R2 and R9 to us. However, please note that the antistatic grade contains carbon, which may cause discoloration on the workpiece. Our company is capable of responding even when material manufacturers are unable to ship by maintaining a rich inventory of materials. By accommodating short delivery times, we aim to mitigate risks for our customers, such as missed arrangements or damage to jigs, as much as possible. [About Our Processing] ■ General Lathe Processing (Mori Seiki) This is used for simple lathe processing items, finishing processes, and chamfering of processed items that do not require programming. ■ Material MC Nylon (Monomer Cast Nylon) is often used in areas where mechanical strength (impact resistance) is required, and the material itself is readily available, making it widely used. The antistatic grade is often used in semiconductor-related applications. *For more details, please refer to the PDF materials or feel free to contact us.

• others

At Takimoto Giken Kogyo, we accommodate the inner and outer diameters, total length, and polishing (visualization) processing of acrylic (PMMA) pipes. However, pipes for industrial machinery related to the automotive sector often have simple shapes but are typically long, which can complicate machine setup and may result in slightly longer delivery times. Acrylic (PMMA) is the most transparent material among resins. Therefore, when there is a need to visualize processed products, acrylic products are often polished with a buff for visualization and used for exhibitions or training materials. [About Our Processing] ■ General-purpose Lathe Processing (Mori Seiki) Used for simple lathe-processed items or finishing processes and chamfering of processed products that do not require programming. ■ Inspection Method We check the received drawings with a checkmark and record actual measurements for areas with tolerances. By inspecting, we reduce the defect rate caused by issues not reflected in the numbers, ultimately allowing us to meet your requests. *For more details, please refer to the PDF materials or feel free to contact us.

• others

At Takimoto Giken Kogyo, we manufacture automotive and semiconductor-related jigs using fluoropolymer PTFE (Teflon) processing. Due to the properties of the material, it is often used in areas that are prone to chemical exposure because of its high chemical resistance. Our factory operates on weekends and holidays, and we can accommodate requests for necessary items after the holidays. By responding to short delivery times, we aim to minimize risks for our customers, such as missed arrangements or damage to jigs, which are often difficult to prevent. [About Our Processing] ■ NC Lathe Processing (Okuma) In small lots, we often process R-shaped designs that do not have standard products through NC processing, which does not incur tool costs unlike general-purpose machines. ■ Material For scientific and laboratory equipment, chemical resistance is often required, and since the precision requirements are not very strict, we frequently use PTFE (Teflon). PTFE (Teflon, Naflon, Valflon) is an excellent material for chemical resistance, but it has significant variations in dimensional tolerances, so we handle it with care as the dimensions can change simply by measuring it by hand during inspection. *For more details, please refer to the PDF document or feel free to contact us.

• others

At Takimoto Giken Kogyo, we cut and process anti-static plastic resin (electrostatic discharge) sheets (plates). They are suitable for static electricity countermeasures. For automotive-related industrial machinery check fixtures, we take care to minimize tolerances, warping, and distortion from the cutting of materials. Depending on the processing shape and material, we will do our best to meet your desired delivery date. 【About Our Processing】 ■Machining (Mori Seiki) For mass-produced items, we refine the program to short processing conditions to meet your requests for unit price and delivery time as much as possible. ■Materials MC Nylon (monomer cast nylon) is often used in areas where mechanical strength (impact resistance) is required, and the material itself is readily available, making it widely used. Additionally, there are many grades available, making selection easier. ■Delivery Time For mass-produced items, we manage machine operating rates effectively and rearrange shifts to improve efficiency and meet your requests for costs and delivery times. *For more details, please refer to the PDF materials or feel free to contact us.

• others

At Takimoto Giken Kogyo, we manufacture work guides made of conductive plastic resin (with carbon) that are suitable for electrostatic measures. The shapes of work guides for industrial machinery related to the automotive industry are often relatively simple, allowing for production in a short lead time and at a low cost. We can accommodate small lot orders. 【Processing Information】 ■ We use CADCAM to create programs and processing conditions with a sense of speed. *If you have 2D data, please provide it. ■ Material MC Nylon (monomer cast nylon) is often used in areas where mechanical strength (impact resistance) is required, and the material itself is readily available, making it widely used. However, since it is a conductive grade, the price is slightly higher. ■ Support We flexibly accommodate your company's payment terms, direct shipping, and processing of products based on actual items or without 3D CAD data. *For more details, please refer to the PDF materials or feel free to contact us.

• others

At Takimoto Giken Kogyo, we manufacture guide rollers made of plastic resin. Since chip processing is difficult, the waste itself becomes industrial waste, so by outsourcing, you don't have to worry about post-processing. Additionally, for small lots, we often process R shapes that do not have standard products through NC machining, which does not incur tool costs unlike general-purpose machines. = Useful Information = The "rollers" for automotive-related industrial machinery often have relatively simple shapes, and those with meat removal processing tend to be more expensive. Furthermore, high molecular polyethylene (HHMW, Tybar, Newlight, Ulmora) is an excellent material for wear resistance, but it is on the softer side among resins and can leave marks if pressed hard with a nail. Our company can also accommodate items with a high production volume. For mass-produced items, we respond to requests for cost and delivery time more efficiently by managing machine operating rates and adjusting shifts. *For more details, please refer to the PDF document or feel free to contact us.*

• others

At Takimoto Giken Kogyo, we can manufacture caps from PVC and process inch screws to match actual items. PVC has high chemical resistance and low heat resistance, but it is inexpensive and can be bonded or welded, making it widely used for safety covers and processed building pipe materials. In our company, for small lots, we often process R-shaped designs that do not have standard specifications through NC processing, which does not incur tool costs unlike general-purpose machines. Additionally, screws that match actual items are processed while making adjustments. We also accommodate items with large production quantities. For mass-produced items, we efficiently manage machine operating rates and adjust shifts to better meet cost and delivery requests. We flexibly respond to corporate payment terms, direct shipping, and custom products based on actual items. *For more details, please refer to the PDF document or feel free to contact us.*

• others

At Takimoto Giken Kogyo, we manufacture manifolds using MC nylon! Manifolds for industrial machinery related to automobiles often have relatively simple shapes, but they tend to produce a lot of burrs. Therefore, we address the easily burr-prone RC (PT) screw sections with helical processing. Typically, using taps for processing can help suppress the generation of burrs. Additionally, MC nylon (monomer cast nylon) is commonly used in areas where mechanical strength (impact resistance) is required, and the material itself is readily available, making it versatile for various applications. [About Our Processing] ■ Machining (Mori Seiki) We use CADCAM to create programs and processing conditions with a sense of speed. *Please provide D data if available. ■ High Quality We strive to meet your requirements as closely as possible regarding the weaknesses of plastic resins, such as tolerances, distortion, warping, and burrs. ■ Inspection By conducting inspections, we can reduce the defect rate caused by issues that are not reflected in numbers, ultimately allowing us to meet your requests. Since our establishment in 1971, we have been in operation. Please consult with us! *For more details, please refer to our catalog or feel free to contact us.

• others

The knurling process on plastic resin provides a non-slip effect. The knurling for industrial machinery related to automobiles often features relatively simple shapes and is commonly used for items like caps and grips. Ultra-high molecular weight polyethylene (HHMW, Tybar, Newlight, Ulmolar) is excellent in wear resistance due to its material properties, but it is soft, which makes it difficult to achieve a clean and deep knurl. Additionally, among resins, it is on the softer side, and pressing it hard with a nail can leave marks. [About Our Processing] ■ General Lathe Processing (Mori Seiki) Used for simple lathe-processed items, finishing processes, and chamfering, for items that do not require programming. ■ Small Lot Support Production is possible from one piece. Repeat orders can also be accommodated from single items. By responding to short delivery times, we aim to minimize customer risks such as unpreventable order omissions and tool damage. *For more details, please refer to the PDF document or feel free to contact us.

• others

We manufacture work receivers for magazines made of ABS resin, and we also handle assembly for subsequent transport trays! By providing consistent support from processing to assembly, we ensure smooth operations without worries about missed arrangements. There are various shapes of work receivers for industrial machinery related to the automotive sector, but by utilizing machining techniques, we can closely match your desired conditions and shapes. ABS (Acrylonitrile Butadiene Styrene) is a type of plastic resin that can be bonded with solvents, making assembly easy. It is also cost-effective, which is why it is widely used for pallets and magazines. [About Our Processing] ■ NC Lathe Compound Processing (Okuma) For mass-produced items, we use a 5-axis machining center for processing round items and small parts, which increases machine utilization rates. ■ Mass Production Support For mass-produced items, we manage machine utilization effectively and adjust shifts to enhance efficiency, thus meeting cost and delivery requests. *For more details, please refer to the PDF document or feel free to contact us.

• others

We will manufacture screw nozzle processing of ultra-high molecular weight polyethylene resin using 4-axis machining. Jet nozzles related to industrial machinery often have complex shapes, and since the programming is also complicated, when jigs or 4-axis/5-axis machining machines are required, the product price tends to be higher. Ultra-high molecular weight polyethylene (HHMW, Tybar, New Light, Ulmolar) has excellent wear resistance due to its material properties, but it is soft, making it difficult to achieve a clean and deep cut. Additionally, it is on the softer side among resins, and pressing it hard with a nail can leave marks. [About Our Processing] ■ NC Lathe Compound Processing (Okuma) For processes such as indexing and screw machining, we use a method that does not require clamps or positioning jigs with a 4-axis machining machine. ■ Inspection Method We check the received drawings with a check mark and record actual measurements for areas with tolerances. *In the world of plastic resins, unlike metals, the dimensional tolerances are often ambiguous, leading to a temperature difference with manufacturers handling metal products. *For more details, please refer to the PDF document or feel free to contact us.

• others

At Takimoto Giken Kogyo, we manufacture screw machining of Quadrant Polypenco polyacetal resin. The screws for industrial machinery related to the automotive sector have a flat shape, which makes the programming complex and requires more time for processing, and there may be cases where delivery takes a bit longer. Additionally, POM (Delrin polyacetal) is a well-balanced material among engineering plastics and is also relatively inexpensive, often compared to MC nylon. [About Our Processing] ■ NC Lathe Complex Machining (Okuma) For processes such as indexing and screw machining, we use a 4-axis machining center that does not require clamps or positioning jigs. Our factory operates on Saturdays, Sundays, and holidays, and we can accommodate requests for necessary items after holidays. By responding to short delivery times, we aim to minimize risks for our customers, such as missed arrangements or damage to jigs, as much as possible. *For more details, please refer to the PDF document or feel free to contact us.

• others

At Takimoto Giken Kogyo, we perform machining (milling) on Unilate for cutting processes. The processed products are used in jig-related applications and have somewhat complex shapes. Additionally, jig parts for automotive applications often involve products designed for quick and accurate assembly and measurement on-site, resulting in a clean workbench, and may include fitting to actual parts. Unilate is a glass-filled material, but it has better tolerance, distortion, and warping characteristics compared to other glass-filled materials, making it easier to process. Although it is slightly more expensive in terms of material cost, it is used in areas where strength is required. [About Our Processing] ■Machining (Mori Seiki) We use CADCAM to create programs and processing conditions with a sense of speed. *Please provide 2D data if available. ■Lot and Delivery We flexibly accommodate corporate payment conditions, direct shipping, and products based on actual parts, including small lots that may have been declined elsewhere. Since our establishment in 1971, we have been in operation, so please consult with us! *For more details, please refer to the PDF materials or feel free to contact us.

• others

At Takimoto Giken Kogyo, we manufacture New Light (UHMW) using NC lathe machining centers. For large quantities and complex processing, we use a combined machining center. In the case of industrial machine-related collets, if clamped with metal, it can scratch the workpiece, so they are sometimes made of plastic resin. Additionally, ultra-high molecular polyethylene (HHMW, Tybar, New Light, Ulmolar) is a material that excels in wear resistance and is relatively soft among resins, leaving marks when pressed hard with nails. [About Our Processing] ■ Machining (Mori Seiki) + NC Lathe Processing (Okuma) If clamping or positioning takes time, we use both NC machines for processing. ■ Lot For mass-produced items with a large number of units, we manage machine operating rates effectively and adjust shifts to improve efficiency and meet cost and delivery requests. *For more details, please refer to the PDF document or feel free to contact us.

• others

Do you have any of these troubles? ■ They gave a low estimate, but in the end, the delivery is delayed due to lack of time... ■ Right before placing the order, they suddenly said they couldn't handle it because it was difficult to process... ■ The precision of the delivered processed products was not good... ■ The strength of the welded or glued parts was weak, resulting in defective products... ■ They refused to take on the project because there were no drawings and it was just a single prototype... and so on. At Takimoto Giken Kogyo Co., Ltd., we offer contract processing utilizing our equipment for high-precision cutting, heat processing, engraving, rubber processing, sponge processing, and more. In addition to following the drawings, we also propose processing methods that take into account the tolerances, burrs, and warping of plastics. We handle everything in-house, from prototypes starting from a single unit to mass production. We provide suitable plastic resin processing based on the characteristics, knowledge, and know-how of plastic materials. Please consult with us once. *For more details, please refer to the PDF materials or feel free to contact us.

• others

At Takimoto Giken Kogyo, we manufacture and mass-produce Thomson molds using PTFE (Teflon). While die-cut processing requires a Thomson mold and incurs mold costs, we strive to meet your requests regarding unit price and delivery time as much as possible. *Only applicable to thin plates. Due to processing conditions such as tapering, it may not be possible depending on the shape. ~Points~ For scientific and laboratory equipment, chemical resistance is often required, but the precision requirements are not very strict, so PTFE (Teflon) is commonly used. PTFE (Teflon, Naflon, Barufuron) is an excellent material for chemical resistance, but it has a large variation in dimensional tolerances, and care must be taken as dimensions can change simply by measuring with bare hands during inspection. Our company has shifted to a mass production system to accommodate items with high production volumes. *Unlike metals, plastic resin materials are generally arranged in standard lengths. *For more details, please refer to the PDF document or feel free to contact us.

• others

At Takimoto Giken Kogyo, we mass-produce stoppers using the CN-CL NC lathe multi-processing machine. There are two helicoils for the set screws, and if it is a multi-processing machine, it can be processed with a single chuck. The "stoppers" for the automotive-related industrial machinery often have simple shapes, making it possible to closely meet your requirements through machining. Additionally, MC nylon (monomer cast nylon) is frequently used in areas requiring mechanical strength (impact resistance), and the material itself is readily available, making it widely used. *There are many grades available, making selection easier. When responding to mass-produced items using NC lathe multi-processing (Okuma), we use 5-axis machining for items that require round part indexing and small parts to increase machine utilization. Furthermore, by implementing a shift system, we can also accommodate items with high production numbers. For items needed immediately after a break, we utilize weekends and holidays to ensure we can meet your requested delivery dates as much as possible. *For more details, please download the PDF or feel free to contact us.

• others

At Takimoto Giken Kogyo, we manufacture flange bushes to your desired dimensions using NC lathes. ~Points~ Due to the simple shape, we can also accommodate processing on general-purpose lathes with a single chuck. In small lots processed on NC lathes (Okuma), it is common to perform machining of R shapes that do not have standard products, and unlike general-purpose machines, there are no tool costs involved. Additionally, Oiles (polyacetal resin) contains lubricants and special fillers, which makes it difficult to meet tolerances, warping, and distortion, but it has excellent machinability. Our company flexibly accommodates payment terms for businesses, direct shipping, and custom products based on actual items. By conducting inspections, we aim to reduce the defect rate caused by factors that are not reflected in numbers, ultimately meeting your requests. Please consult with us, as we have been in operation since our founding in 1971! *For more details, please download the PDF or feel free to contact us.*

• others

At Takimoto Giken Kogyo, we use NC lathes to manufacture washers to your desired dimensions. *Due to the simple shape, we may also process them using general-purpose lathes depending on machine operating rates. =Helpful Information= Oiles (polyacetal resin) contains lubricating oil and special fillers within the polyacetal resin, making it difficult to meet tolerances, warping, and distortion, but it has excellent machinability. General-purpose lathe processing (Mori Seiki) is used for simple lathe-processed items, finishing processes, and chamfering of processed items that do not require programming. In our company, we check the received drawings with a checkmark and record the actual measurements for areas with tolerances. We flexibly accommodate your company's payment conditions, direct shipping, and processing of products without 3D CAD data or based on physical samples. Since our establishment in 1971, we have been in operation until now, so please consult with us once! *For more details, please download the PDF or feel free to contact us.

• others

At Takimoto Giken Kogyo, we use an NC lathe multi-tasking machine to manufacture jigs for Oiles. While we can also process using a general-purpose lathe and milling machine, we opted for the multi-tasking machine to improve efficiency. ~Helpful Information~ Oiles for the automotive-related industrial machinery often have simple shapes, but materials may need to be ordered, which can lead to longer delivery times. However, Oiles (polyacetal resin) contains lubricants and special fillers, making it difficult to meet tolerances, warping, and distortion, but it has excellent machinability. Our company manufactures indexing and screw machining using an NC lathe multi-tasking machine (Okuma) without the need for clamps or positioning jigs, and we can accommodate items with high production volumes. If you have previously experienced difficulties in getting small lots (low quantities) accepted while larger production runs were accepted, please feel free to consult with us! *For more details, please download the PDF or feel free to contact us.*

• others

At Takimoto Giken Kogyo, we manufacture workpieces using cloth phenolic resin (Bakelite) through machining. The workpieces for industrial machinery related to the automotive sector come in various shapes depending on their design, and we adapt by changing the processing machines to meet your requirements as closely as possible. Additionally, due to the presence of tapers and radii at the processing points, we perform 3D machining (three-dimensional) using machining (Mori Seiki) by creating 3D data from drawings with CADCAM. (If you have 3D data, please provide it.) The inspection method involves checking the received drawings with a checkmark, and for areas with tolerances, we will record the actual measurements. By inspecting the aspects that are not reflected in the numbers, we aim to reduce the defect rate and ultimately meet your requests. ★Helpful Information Cloth-reinforced Bakelite (PL-FLE) is a phenolic resin with a cloth-reinforced substrate. It is generally more difficult to process than paper-reinforced substrates due to its layered nature, so it is advisable to avoid complex shapes. *For more details, please refer to the PDF materials or feel free to contact us.

• others

We would like to introduce a case where screws, which are a weakness of plastic resin materials, were reinforced with Helicoil (insert)! Although the strength decreases compared to Enzart, the price is relatively affordable, so we highly recommend Helicoil whenever possible. Additionally, work guides for industrial machinery related to the automotive industry often have relatively simple shapes, making them feasible to produce in a short lead time and at a low cost. ★Helpful Information MC Nylon (Monomer Cast Nylon) is commonly used in areas where mechanical strength (impact resistance) is required, and the material itself is readily available, making it versatile. ~About Us~ Due to our shift system, we can accommodate a large number of items. For items needed immediately after a holiday, we utilize Saturdays, Sundays, and public holidays to ensure we can meet your requested delivery dates as much as possible. Since our establishment in 1978, we have specialized in processing plastic resins, so please feel free to consult with us! *For more details, please refer to the PDF document or feel free to contact us.

• others

At Takimoto Giken Kogyo, we have manufactured "pallet jigs" using MC nylon and POM through cutting processing and assembly. ~Points~ MC nylon (monomer cast nylon) is commonly used in areas requiring mechanical strength (impact resistance), and the material itself is readily available, making it versatile. In this case, the base was made of POM for color differentiation. We measure the pallet size and work size, checking for interference and accuracy rather than relying on physical matching. There are various shapes of pallets for industrial machinery related to the automotive industry, but our company handles everything from lathe processing to machining and assembly, bringing us closer to our customers' requests. Additionally, we use machining (Mori Seiki) CADCAM for speedy program creation and processing conditions. *If you have 2D data, please provide it. We also respond flexibly to various requests, such as payment conditions or the absence of drawings. *For more details, please download the PDF or feel free to contact us.

• others

At Takimoto Giken Kogyo, we can manufacture insulators using heat-resistant PVC (HTPVC) with NC lathe composite processing machines. Insulators for industrial machinery related to automobiles often require thin-walled processing, which is difficult, so materials that can withstand electrolytes are selected. Additionally, while PVC (polyvinyl chloride) has high chemical resistance and low heat resistance, it is inexpensive and can be bonded or welded, making it widely used for safety covers and processed building piping materials. However, due to the prevalence of thin-walled processing and indexing operations, lead times may be longer and prices may be higher. At our company, indexing processing and screw machining using NC lathe composite processing (Okuma) are performed with a 4-axis machining center that does not require clamps or positioning jigs. ★Helpful Information Unlike metals, plastic resins require consideration of tolerances, distortion, warping, and burrs. Tolerance areas may have ambiguous dimensional tolerances, so we recommend leaving plastic processing to the professionals. *For more details, please refer to the PDF materials or feel free to contact us.

• others

At Takimoto Giken Kogyo, we are capable of manufacturing insulation boards using machining processing with plastic resin material, Hemisarl. For industrial machinery related to the automotive sector, "insulation boards" are often made from thermosetting materials, and many of these items are relatively easy to process. Our company uses machining processing (Mori Seiki) and CADCAM to create programs and processing conditions with a sense of speed. (If you have 2D data, please provide it.) Additionally, we can produce small lots, starting from just one piece. We also accommodate repeat orders from single items. If you have previously experienced difficulty in getting small lots (low quantities) accepted while larger production runs were accepted, please consult with us! *For more details, please refer to the PDF materials or feel free to contact us.

• others

At Takimoto Giken Kogyo, we used a welding machine to create arms from cut plastic resin materials. = Useful Information = For semiconductor-related products, many PVC (polyvinyl chloride) processed items often have conditions that are stricter than the drawings, requiring considerable discussions. Additionally, while they have high chemical resistance and low heat resistance, they are inexpensive and can be both glued and welded, making them widely used for safety covers and construction piping materials. Our company uses a welding machine (Fuji Impulse) to apply heat to materials such as PVC (polyvinyl chloride), PP (polypropylene), and PE (polyethylene), welding while melting the welding rod. By maintaining a rich inventory of materials, we can respond even when material manufacturers are unable to ship. *Unlike metals, plastic resin materials are generally arranged in fixed lengths. *For more details, please refer to the PDF document or feel free to contact us.

• others