エムアイティ List of Products and Services

The ARGO-HYTOS Group is a global supplier of hydraulic system solutions. With over 75 years of experience in fluid and motion control and filtration technology, ARGO-HYTOS continues to set new standards in the hydraulic industry. (ARGO-HYTOS holds many patents and sets new benchmarks in the industry.) Particularly in mobile hydraulic equipment, the company has become a leader in innovation. ARGO-HYTOS has production facilities in Germany, the Czech Republic, India, China, Poland, Brazil, and the United States, providing products worldwide from each factory. We are an authorized distributor of Argo Hytos.

• others

NuPure's "Eliminator CA" is an inline gas purifier that reduces impurities from H2 gas to sub-ppb levels at room temperature. It requires no heater or power supply, allowing for impurity removal (improving gas purity) at room temperature. We offer models/sizes that can accommodate both low and high flow rates. 【Features】 ■Removal of impurities to below 1 ppb ■No heater or power supply required ■Room temperature operation (RT) ■Housing made of 316L SS (<10 Ra EP) ■Regenerable for up to 10 years *Models for inert gases and O2 gas are also available separately. *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The NuPure Point of Use (Inline) Gas Purifier Dryer Series removes H2O (impurities) from various gases down to ppb levels. It can be used simply by installing it in existing gas lines. It is capable of handling both low and high flow rates and can be regenerated for repeated use. For more details, please contact us. (*This product is intended for high-purity gases.)

• others

The "Omni Series" is a purifier equipped with a heater and electronic assembly. It features an integrated Ultra Pure PF/XL series purifier (filter) that can reduce gas impurities from inert gases, hydrogen, hydrogen compounds, acidic gases, and oxygen to sub-ppb levels. We offer a fully integrated system, including manual In/Ex valves and gas particle filters, at a low cost. 【Features】 ■ Equipped with heater and electronic assembly ■ Compact design ■ Easy operation ■ Simple operation temperature control with reliability and safety ■ Capable of operating continuous heating or room temperature operation on-site *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Eliminator CA" is a gas purifier manufactured by NuPure that reduces gas impurities to sub-ppb levels under room temperature operation. It removes substances such as H2O, O2, CO, CO2, H2, and NMHC from inert gases (nitrogen, argon, helium, krypton, neon, xenon) to levels below 1 ppb. We offer products in a standard size with a flow range of 0 to 2500 slpm. 【Features】 ■ Removal of impurities to below 1 ppb ■ No heater or power supply required ■ Room temperature operation (RT) ■ Housing made of 316L SS (<10 Ra EP) ■ Reusable for up to 10 years *For more details, please refer to the PDF document or feel free to contact us.

• others

Nitrile gloves with latex-like elasticity and excellent fit (Class 100 compatible)

• Safety and consumables

These cleaning gloves have excellent grip performance suitable for a wide range of tasks. The low-protein specification reduces the risk of allergic reactions caused by protein.

• Safety and consumables

The RPG-type end face processing machine from Germany's Orbitalum is capable of perfectly processing the end faces of tubes for precision automatic welding. Despite being lightweight and compact, the structure of the head is robust and precise, ensuring high processing accuracy. You can select the model according to the size of the tube to be processed: "RPG ONE," "RPG1.5," and "RPG3.0." There is also a battery-operated type that is ideal for on-site work. We also handle replacement blades. Please refer to the catalog for more details.

• Work tools

3PLY cleanroom masks suitable for use in cleanrooms. ■ Low dust generation - The mask uses thermal bonded non-woven fabric on both the front and back surfaces, achieving low dust generation. - Made with Class 100 compliant materials. ■ High filtration performance - BFE (Bacterial Filtration Efficiency): Average 99.1% - PFE (Particulate Filtration Efficiency): Average 99.2% - VFE (Viral Filtration Efficiency): Average 99% *The values are measurements and not guaranteed values. ■ High breathability - Designed for the comfort of the wearer, with a focus on breathability. The thermal bonded non-woven fabric has very little fluffing, making it less likely to snag on beards and other protrusions, and is recommended for use outside of cleanrooms as well.

• Other office supplies

S. Himmelstein & Company (SHC) has been designing and manufacturing the world's highest precision torque transducers and measuring instruments since 1960. SHC's products offer significant advantages over competitors' models, not just in terms of data on calibration stands, but also in overall performance and accuracy in testing and measurement environments.

• others

The site pipe is an ideal product for visually inspecting and confirming the weld bead inside the tube generated by a circumferential welding machine. When this system is inserted into the welding assembly of tubes or tube fittings, it projects an enlarged image of the weld area onto the top of the head. The visible image allows for verification similar to directly inspecting a cut sample. The site pipe for tube welding has a tapered tip, making it suitable for narrow tube piping that has been constricted by the weld bead (*Regular Series).

• others

This is an external supercharger for engine bench testing. It allows for boost testing by retrofitting a supercharger onto the test engine. Since it comes with a control controller, there is no need to worry about controlling the boost pressure. ■Basic Specifications Flow Rate: 420m³/h at 12,000rpm Pressure Ratio: 1.8 (continuous) 2.0 (momentary) *Maximum pressure ratio of 3.0 is possible (two-stage supercharging) *Specifications are subject to discussion.

• others

The NuPure Gas Purifier C Series is an ideal gas filter for purifying back shield gas during high-purity gas welding. It combines proven gas purification technology and filtration technology into a compact, integrated gas purifier. It removes H2O and O2 from Ar gas to below 1 ppb* (when using 5N5 grade gas). Since it does not require a power supply, it has received positive feedback for use in fieldwork.

• others

Thermocouples are temperature sensors used in various industrial fields to measure the temperature at measurement contact points. This technology utilizes the properties of different types of metallic conductors, and the reliability of the measurement values is particularly important. At MIT, we provide stable and high-quality thermocouples supported by reliable technology to a wide range of industrial sectors. If you let us know the specifications of the thermocouples (type, length, material, etc.), we can manufacture and sell them from a single unit at short lead times and low prices.

• Other measuring instruments
• others

■Features - Instant temperature measurement using two types of ultra-fine thermocouples - Capable of measuring the actual temperature inside the combustion chamber

• Other measuring instruments
• others

Using an original special scope system, it is possible to visualize the inside of the engine. ■Features - Visualization of the combustion chamber in mass-produced engines is possible. - By modifying mass-produced engines, combustion visualization tests under high loads can be conducted. - The combustion conditions and the spread of NOx generation can be directly confirmed. - Simultaneous acquisition of various measurement data such as cylinder pressure and image data is possible.

• others

The Omni series' "NuPure Gas Purifier" is a gas purification device (gas filter) manufactured by NuPure, which integrates a heater, insulation, and electronic components (temperature control). It features built-in purifiers (filters) from the "Ultra Pure PF/XL series," capable of reducing gas impurities from inert gases, hydrogen, hydrogen compounds, acidic gases, and oxygen to sub-ppb levels. The "PF series" includes a built-in filter with a pore size of 0.003μm. 【Features】 ■ Integrated heater, insulation, and electronic components (temperature control) ■ Built-in purifiers (filters) from the Ultra Pure PF/XL series ■ Reduces gas impurities to sub-ppb levels ■ PF series includes a built-in filter with a pore size of 0.003μm *For more details, please refer to the PDF document or feel free to contact us.

• others
• Gas equipment

By using Parker Hannifin's finder leak detection liquid, you can easily, reliably, and quickly detect leaks in joints and valves of industrial gas piping with bubbles. - Excellent foaming allows for gas leak detection on any surface. - Non-corrosive and non-flammable, causing no damage to the piping. - Can be applied to tight spaces with the included flexible tube. - Suitable for temperatures ranging from -28°C to +93°C. - Compliant with MSDS.

• others

Fluid control products that require corrosion resistance or need to maintain the purity of the medium are produced at Parker Hannifin's Partek facility. All products feature wetted parts made from scientifically inert and corrosion-resistant PFA or PTFE. The leak-proof and durable Partek products are used in various applications including semiconductor manufacturing, chemical processing, food and pharmaceutical formulation, as well as instrumentation for biomedical and analytical purposes.

• others

The "High-Pressure Gasoline Pump Unit" is a control system that can supply high-pressure fuel pressure for performance testing of gasoline engines and other applications. 【Features】 - It uses automatic vehicle parts, which provide excellent durability and efficiency. - It is portable, allowing for flexibility in layout and configuration. - This single unit can supply both low-pressure and high-pressure fuel pressures. A high-pressure pump lubrication unit is also incorporated. *For more details, please refer to the PDF document or feel free to contact us.

• others

We will propose a more efficient device that meets your specifications, taking into account not only performance but also installation space. We can provide a reasonable type with a control range of ±5°C, as well as a high-precision type with ±1°C. We can also manufacture heating and cooling types, as well as heating-only or cooling-only types. Additionally, we can build a system with various interlocks and alarms on the device side. Compatible with brine water (chiller fluid) and engine coolant. We can accommodate various original control integrations.

• others

The "QIII" manufactured by Pentagon Technologies is a device capable of detecting and measuring particles on sample surfaces in just a few seconds. It allows for easy and rapid measurement of particles on sample surfaces, enabling the quantitative definition of cleaning procedures and standards, thereby reducing variability in particle management without relying on the intuition and experience of operators. It is suitable for quality checks before shipping and upon receiving precision cleaning parts, as well as for maintaining cleanliness in various manufacturing equipment. Additionally, the "QIII SM / QIII ST" is equipped with Pentagon's proprietary technology for use in today's clean environments. 【Features】 ■ Detects/measures particles (0.1um and above) on sample surfaces in seconds ■ Clear and distinct screen display provided by a 7-inch high-resolution WVGA screen ■ Measured data can be easily downloaded directly via USB port *For more details, please refer to the PDF document or feel free to contact us.

• others

"The ELIMINATOR CAG" is an inline gas purifier manufactured by NuPure, combining purification technology and fine particle filter technology. It employs patented CAG (Catalyst/Absorber/Getter) purification technology, significantly improving purification performance. As a result, it achieves purification performance with an outlet purity level of less than 0.5 ppb. It also demonstrates excellent performance at room temperature. It is effective for purifying inert gases from liquid sources. 【Features】 ■ Utilizes patented CAG purification technology ■ Significantly improved purification performance ■ Achieves purification performance with outlet purity levels of less than 0.5 ppb ■ Demonstrates excellent performance at room temperature ■ Effective for purifying inert gases from liquid sources *For more details, please refer to the PDF document or feel free to contact us.

• others

The uncertainties in the data measured by computer simulation can be verified with actual equipment (real engine). A system has been realized that allows for direct observation of the combustion state, the location and spread of NOx emissions, by installing heat-resistant reinforced glass on the cylinder 360 degrees and on the top of the piston. With the introduction of a glass cylinder, resin-based piston rings, and a special head gasket, testing can be conducted at high rotational speeds with low vibration thanks to the balancer. The engine specifications will be designed and manufactured according to the customer's requirements. 【Features】 ■ 360° observation of the combustion chamber from both horizontal and vertical directions with the glass cylinder ■ Direct confirmation of combustion conditions and the location and spread of NOx emissions ■ Acquisition of various measurement data

• others

At MIIT Corporation, we sell a wide range of products used in clean rooms. Among the various sources of dust generation in clean rooms, the most significant factor is attributed to the workers. To solve the particle problems within clean rooms, dust-proof clothing and related products play a crucial role. We deliver high-quality clean room products that pursue excellent dust-proofing and electrostatic properties, as well as the comfort of the workers, supporting productivity improvement. [Features] ■ Wide range of products ■ Products designed for worker comfort ■ Support for productivity improvement *Please feel free to contact us.

• others
• Safety and consumables