ペリー・ジャパン List of Products and Services

PERI has launched a digital solution that optimizes the concrete pouring process at construction sites, contributing to time savings and cost reductions. "PERI ISC" (PERI InSite Construction) is a concrete sensor product for construction. This product consists of measuring devices (a main hub and child nodes), sensors, and a web cloud service that handles the collected data. The installable sensors include temperature sensors, pressure sensors (for lateral pressure measurement), and filling/compaction detection sensors. (In the future, a water-cement ratio sensor may also be available.) By optimizing the pouring work and the operating time of the formwork based on the information collected from various sensors installed within the concrete formwork, it is possible to carry out the demolding process earlier and reduce the amount of necessary formwork materials, leading to labor savings and time and cost reductions at construction sites. Additionally, the web cloud service allows for monitoring and analyzing data without being constrained by time or location. The web-based tools can be accessed from various devices.

<NETIS Registration Number: CB-230029-A> https://www.netis.mlit.go.jp/netis/ "PERI ISC" (PERI InSite Construction) is a concrete sensor product for construction. This product consists of measuring devices (main Hub and child Nodes), sensors, and a web cloud service that handles the collected data. The installable sensors include temperature sensors, pressure sensors (for lateral pressure measurement), and filling/compaction detection sensors. (In the future, a water-cement ratio sensor may also be available.) Based on the information collected from various sensors installed within the concrete formwork, it is possible to optimize the pouring work and the operating time of the formwork, allowing for earlier demolding during the pouring process and reducing the amount of necessary formwork materials, which leads to labor savings and time and cost reductions at construction sites. Additionally, the web cloud service allows for monitoring and analyzing data without being constrained by time or location. The web-based tools can be accessed from various devices.

<NETIS Registration Number: CB-230029-A> PERI is launching a digital solution that optimizes the concrete pouring process at construction sites, contributing to time savings and cost reduction. 'PERI ISC' (PERI InSite Construction) is a concrete sensor product for construction. This product consists of measuring devices (main Hub and child Nodes), sensors, and a web cloud service that handles the collected data. The installable sensors include temperature sensors, pressure sensors (for lateral pressure measurement), and filling/compaction detection sensors. (In the future, a water-cement ratio sensor may also be available.) By optimizing the pouring work and the operating time of the formwork based on the information collected from various sensors installed within the concrete formwork, it is possible to carry out the demolding process earlier and reduce the amount of necessary formwork materials, leading to labor savings and time and cost reductions at construction sites. Additionally, the web cloud service allows for monitoring and analyzing data without being constrained by time or location. The web-based tools can be accessed from various devices.

<NETIS Registration Number: CB-230029-A> https://www.netis.mlit.go.jp/netis/ 'PERI ISC' (PERI InSite Construction) is a concrete sensor product for construction. This product consists of measuring devices (main Hub and child Nodes), sensors, and a web cloud service that handles the collected data. Installable sensors: 1. Temperature sensor 2. Pressure sensor (for lateral pressure measurement) 3. Filling and compaction detection sensor (Future availability of water-cement ratio sensor is also planned) With the web cloud service, data can be monitored and analyzed without being constrained by time or location. In the construction industry, the quality of concrete structures is a crucial factor that affects safety and durability. In particular, temperature and pressure management during pouring is essential to prevent cracking and strength reduction. 'PERI ISC' (PERI InSite Construction) measures the temperature and pressure inside the concrete in real-time, enabling the determination of the appropriate demolding timing. This enhances the accuracy of quality control and improves the reliability of structures.

<NETIS Registration Number: CB-230029-A> https://www.netis.mlit.go.jp/netis/ "PERI ISC" (PERI InSite Construction) is a concrete sensor product for construction. This product consists of measuring devices (main Hub and child Nodes), sensors, and a web cloud service that handles the collected data. Installable sensors: 1. Temperature sensor 2. Pressure sensor (for lateral pressure measurement) 3. Filling and compaction detection sensor (Future availability of water-cement ratio sensor is also planned) With the web cloud service, data can be monitored and analyzed without being constrained by time or location. In the bridge industry, quality control of concrete is crucial to ensure the long-term safety and durability of structures. Improper curing, voids within the concrete, separation of concrete components, and premature formwork removal can compromise the durability of structures. PERI ISC monitors the temperature, pressure, and filling conditions of concrete in real-time, supporting optimal pouring processes.

<NETIS Registration Number: CB-230029-A> https://www.netis.mlit.go.jp/netis/ "PERI ISC" (PERI InSite Construction) is a concrete sensor product for construction. This product consists of measuring devices (main Hub and child Nodes), sensors, and a web cloud service that handles the collected data. Installable sensors: 1. Temperature sensor 2. Pressure sensor (for lateral pressure measurement) 3. Filling and compaction detection sensor (Future availability of water-cement ratio sensor is also possible) With the web cloud service, data can be monitored and analyzed without being constrained by time or location. In tunnel construction, cracking in concrete is a serious issue that undermines the durability of structures. If appropriate measures are not taken, it could lead to large-scale repair work or, in the worst case, the cessation of tunnel functionality. It is crucial to accurately understand the internal condition of the concrete to quickly identify the causes of cracking and implement appropriate measures. PERI ISC supports optimal pouring processes.

<NETIS Registration Number: CB-230029-A> https://www.netis.mlit.go.jp/netis/ "PERI ISC" (PERI InSite Construction) is a concrete sensor product for construction. This product consists of measuring devices (main Hub and child Nodes), sensors, and a web cloud service that handles the collected data. Installable sensors: 1. Temperature sensor 2. Pressure sensor (for lateral pressure measurement) 3. Filling and compaction detection sensor (Future availability of water-cement ratio sensor is also possible) With the web cloud service, data can be monitored and analyzed without being constrained by time or location. In the construction industry, the quality of concrete structures is a crucial factor that affects safety and durability. In particular, temperature and pressure management during pouring is essential to prevent cracking and strength reduction. "PERI ISC" (PERI InSite Construction) measures the temperature and pressure inside the concrete in real-time, enabling the determination of the appropriate demolding timing. This enhances the accuracy of quality control and improves the reliability of structures.

Using the "SONO HUB (Water/Cement Ratio Sensor / Web Application)", you can quickly and accurately measure the unit water content of fresh concrete on-site. This device is based on innovative TRIME radar technology and supports simple quality control procedures on-site. The product configuration of "SONO HUB" consists of the following two components: 1. "Portable measuring device that displays measurement results" 2. "Shovel-shaped measuring probe" Furthermore, by utilizing the measured data with the "Web Application (Cloud Application)", you can visualize, analyze, and create reports on the data. Its use is not limited to construction sites. For example, in laboratories or facilities that manufacture concrete products, you can maximize workability and manage unit water content without compromising quality.

In construction sites and various scenarios involving concrete, accurate understanding of the water-cement ratio is essential for quality control. This management is particularly important as it directly affects the strength and durability of concrete. An inappropriate water-cement ratio can lead to a decline in concrete quality and the associated risks of repairs and rework. Our product, 'SONO HUB', supports quality control by quickly and accurately measuring the unit water content of fresh concrete on-site. The 'SONO HUB' product consists of (1) a portable measuring device that displays measurement results and (2) a shovel-shaped measuring probe. Furthermore, by utilizing the measured data with a web application (cloud application), visualization, analysis, and report generation of the data are possible. [Usage Scenarios] - Quality control of fresh concrete at construction sites - Concrete mix testing in laboratories - Quality control at concrete product manufacturing facilities [Benefits of Implementation] - Rapid and accurate measurement of water-cement ratio on-site - Simplification of quality control procedures - Increased efficiency through data visualization, analysis, and report generation

In the construction materials industry, particularly in concrete quality control, maintaining the accuracy of mix proportions is emphasized. Accurate measurement of the unit water content in fresh concrete is essential for ensuring quality, as it directly affects the strength and durability of the concrete. An inappropriate water-cement ratio can lead to a decline in the performance of structures and unexpected defects. Our product, "SONO HUB," measures the unit water content quickly and accurately on-site, supporting mix accuracy. The composition of "SONO HUB" consists of (1) a portable measuring device that displays measurement results and (2) a shovel-shaped measuring probe. Furthermore, by utilizing a "web application (cloud application)" for the measured data, visualization, analysis, and report generation are possible. [Usage Scenarios] - Quality control of fresh concrete at construction sites - Concrete mix testing in laboratories - Quality control in concrete product manufacturing facilities [Benefits of Implementation] - Rapid and accurate measurement of unit water content - Stabilization of concrete quality - Improved work efficiency

In the civil engineering industry, quality control of concrete is emphasized to ensure the long-term durability of structures. In particular, managing the water-cement ratio is crucial as it directly affects the strength and durability of concrete, requiring precise measurements. An inappropriate water-cement ratio can lead to cracking and deterioration, potentially shortening the lifespan of structures. Our 'SONO HUB' supports rapid and accurate measurement of the water-cement ratio on-site through innovative TRIME radar technology. The product configuration of 'SONO HUB' consists of (1) a portable measuring device that displays measurement results and (2) a shovel-shaped measuring probe. Furthermore, by utilizing the measured data with a web application (cloud application), visualization, analysis, and report generation of the data are possible. [Usage Scenarios] - During concrete placement for civil structures (bridges, tunnels, dams, etc.) - Compliance with quality control standards - Digitization of construction records [Benefits of Implementation] - Improved durability of concrete - Enhanced accuracy of quality control - Reduction of construction errors

In the manufacturing industry, stabilizing product quality and optimizing material costs are essential. Particularly in the production of concrete products, the precise management of the water-cement ratio is directly linked to the strength and durability of the products, making this management extremely important. An inappropriate water-cement ratio can lead to a decline in product quality and rework in the process. Our product, 'SONO HUB,' supports manufacturing management by rapidly and accurately measuring the water-cement ratio on-site using innovative TRIME radar technology. The configuration of 'SONO HUB' consists of (1) a portable measuring device that displays measurement results and (2) a shovel-shaped measuring probe. Furthermore, by utilizing the measured data through a web application (cloud application), it is possible to visualize, analyze, and create reports on the data. [Usage Scenarios] - Concrete product manufacturing lines - Formulation tests in laboratories - Quality control departments [Effects of Implementation] - Improved accuracy in material management - Stabilization of product quality - Enhanced work efficiency