ペリー・ジャパン List of Products and Services

The "PERI RCS Rail Climbing System" is a climbing system that serves as a formwork-integrated scaffold and self-climbing protection panel. There are two methods of climbing: one using a crane and the other using a movable hydraulic device instead of a crane, allowing for selection based on the construction requirements. Additionally, the climbing formwork-integrated scaffold comes standard with a carriage equipped with push-pull support. 【Product Features】 ■ Safe rail-guided procedure - The moving unit is always connected to the building by climbing shoes. ■ Flexible installation - Climbing shoes can be attached to walls and slab edges. ■ Variable assembly - The arrangement of 125mm holes in the climbing rail allows the platform to be adjusted to the height of each floor. *For more details, please refer to the PDF materials or feel free to contact us.

The "PERI SCS Climbing System" Single-Sided is a climbing-type bracket system primarily used for one-sided construction, meaning it is used in situations where separators are not employed. Common applications include dams, sluice gates, cooling towers, bunkers, main towers, tunnels, and liquid-tight embankments. The brackets are also suitable for forming fixed wall formwork. Additionally, by adding minimal components, it can also accommodate two-sided construction. In the SCS Climbing System, two bracket units and one wall formwork section are integrated to form a crane-movable platform (climbing unit). The components that make up the climbing unit are designed according to a modular concept. By maximizing the use of common components, multiple climbing units can be constructed. *For more details, please refer to the PDF materials or feel free to contact us.*

The "PERI ACS Automatic Climbing System" is an integrated climbing system that serves as a self-climbing working scaffold and a large formwork panel system. 【Product Features】 ■ It is possible to climb with an integrated system of working scaffold and large formwork. ■ It uses hydraulic cylinders (rising 4 to 6 meters in about 20 minutes per batch). ■ Climbing is possible on both the outer side and the hollow of bridge piers. ■ Formwork can be safely and easily constructed and stripped on the main stage. ■ By placing the formwork on a carriage that can move back and forth on the stage, construction and stripping work for each concrete pouring batch can be performed safely and efficiently. *For more details, please refer to the PDF document or feel free to contact us.

The "CB Climbing Bracket System" is a climbing system that integrates a working scaffold with the large wall formwork system VARIO. 【Product Features】 ■ It integrates the working scaffold and large wall formwork, allowing for climbing with a crane. ■ It is ideal for construction of high continuous sections, such as LNG storage tanks. ■ It reduces the labor of assembling and dismantling scaffolding, leading to labor savings and shortened construction periods. ■ By placing the formwork on a carriage that can move back and forth on the stage, it enables safe and efficient construction and stripping operations for each concrete pouring batch. *For more details, please refer to the PDF document or feel free to contact us.

The "PERI RCS Rail Climbing System" is a climbing system that serves as a formwork-integrated scaffold and self-elevating protection panel. There are two methods of climbing: one using a crane and the other using a mobile hydraulic device instead of a crane, allowing for selection based on the specifics of the construction work. Additionally, the climbing formwork-integrated scaffold comes standard with a carriage equipped with push-pull support. 【Product Features】 ■ Safe rail-guided procedure - The moving unit is always connected to the building by climbing shoes. ■ Flexible installation - Climbing shoes can be attached to walls or slab edges. ■ Variable assembly - The arrangement of the 125mm holes in the climbing rail allows the platform to be adjusted to the height of each floor. *For more details, please refer to the PDF materials or feel free to contact us.

The "PERI ACS Automatic Climbing System" is an integrated climbing system that serves as a self-climbing work scaffold and a large formwork panel system. 【Product Features】 ■ It is possible to climb with an integrated system of work scaffold and large formwork. ■ It uses hydraulic cylinders (rising approximately 4 to 6 meters in about 20 minutes per batch). ■ Climbing is possible on both the outer and hollow sides of bridge piers. ■ Formwork can be safely and easily constructed and stripped on the main stage. ■ By placing the formwork on a carriage that can move back and forth on the stage, construction and stripping work for each concrete pouring batch can be performed safely and efficiently. *For more details, please refer to the PDF materials or feel free to contact us.

The "PERI ACS Automatic Climbing System" is an integrated climbing system that functions as a self-climbing work scaffold and a large formwork panel system. 【Product Features】 ■ It is possible to climb with an integrated system of work scaffold and large formwork. ■ It uses hydraulic cylinders (rising approximately 4 to 6 meters in about 20 minutes per batch). ■ Climbing is possible on both the outer and hollow sides of bridge piers. ■ Formwork can be safely and easily constructed and stripped on the main stage. ■ By placing the formwork on a carriage that can move back and forth on the stage, construction and stripping work for each concrete pouring batch can be performed safely and efficiently. *For more details, please refer to the PDF document or feel free to contact us.

The "PERI ACS Automatic Climbing System" is an integrated climbing system that functions as a self-climbing work scaffold and a large formwork panel system. 【Product Features】 ■ It is possible to climb with an integrated system of work scaffold and large formwork. ■ It uses hydraulic cylinders (rising approximately 4 to 6 meters in about 20 minutes per batch). ■ Climbing is possible on both the outer and hollow sides of bridge piers. ■ Formwork can be safely and easily constructed and stripped on the main stage. ■ By placing the formwork on a carriage that allows movement back and forth on the stage, construction and stripping work for each concrete pouring batch can be performed safely and efficiently. *For more details, please refer to the PDF document or feel free to contact us.

The "PERI SCS Climbing System" Single-Sided is a climbing-type bracket system primarily used for one-sided construction, meaning it is used in situations where separators are not employed. Common applications include dams, sluice gates, cooling towers, bunkers, main towers, tunnels, and liquid-tight embankments. The brackets are also suitable for forming fixed wall formwork. Additionally, with the addition of minimal components, it can also accommodate two-sided construction. In the SCS Climbing System, two bracket units and one wall formwork section are integrated to form a crane-movable platform (climbing unit). The components that make up the climbing unit are designed according to a modular concept, maximizing the use of common components to form multiple climbing units. *For more details, please refer to the PDF materials or feel free to contact us.*

The "PERI SCS Climbing System" Single-Sided is a climbing-type bracket system primarily used for one-sided construction, meaning it is used in situations where separators are not employed. Common applications include dams, sluice gates, cooling towers, bunkers, main towers, tunnels, and liquid-tight embankments. The brackets are also suitable for forming fixed wall formwork. Additionally, with the addition of minimal components, it can accommodate two-sided construction as well. In the SCS Climbing System, two bracket units and one wall formwork section are integrated to form a crane-movable platform (climbing unit). The components that make up the climbing unit are designed according to a modular concept. By maximizing the use of common components, multiple climbing units can be constructed. *For more details, please refer to the PDF materials or feel free to contact us.*

The "CB Climbing Bracket System" is a climbing system that integrates a working scaffold and the large wall formwork system VARIO. 【Product Features】 - The integration of the working scaffold and large wall formwork allows for climbing with a crane. - It is ideal for construction of high, continuous sections such as LNG storage tanks. - It reduces the labor of assembling and dismantling scaffolding, leading to labor savings and shortened construction periods. - By placing the formwork on a carriage that can move back and forth on the stage, it enables safe and efficient construction and stripping operations for each concrete pouring batch. *For more details, please refer to the PDF document or feel free to contact us.