高津伝動精機 List of Products and Services

We manufacture molded pulleys through resin, sintering, and die casting on a made-to-order basis. In addition to timing pulleys, we also perform molding of gears, inserts for shafts, and simple assemblies such as press-fitting bearings and clutches. **[Resin]** The resin used for pulleys and gears is typically referred to as engineering plastic, with most being of the thermoplastic type. **[Die Casting]** Pulleys are made using aluminum-based (ADC) or zinc-based (ZDC) materials. These materials have relatively high strength and good wear resistance compared to resin materials. Although some post-processing is required, they allow for relatively high machining precision and can be tapped. **[Sintering]** Iron-based, iron-copper-based, and aluminum-based materials are commonly used for pulleys. They exhibit good characteristics in terms of strength, wear resistance, and precision, and can undergo post-processing such as tapping. Due to their higher specific gravity, they are often used for relatively small pulleys and gears. For more details, please refer to our catalog or feel free to contact us.

• others

This is a transport robot that measures the distance and orientation to THK's unique signposts and autonomously moves along a designated route. By simply moving the signposts, there is no need for teaching, and changing the travel route is easy. In addition to the conventional 500kg towing type, a 1-ton towing type has been added. The dimensions are the same except for the height, so users can consider it with the same handling as before. The travel route is programmed in advance based on the actions of each signpost. The built-in camera recognizes the signposts, which serves as a trigger for actions such as turning and stopping.

• others

--Karatto-kun Features-- - Significantly reduces the consumption of cooking oil and lowers costs due to negative potential. - Moisture evaporates efficiently, resulting in a crispy coating. - By lowering the set temperature, it greatly reduces oil smoke and odor, and delays oil degradation. - Charred particles are less likely to stick to fried foods, allowing for clean frying even when the oil turns dark. --Karatto-kun Principle-- 〇 The oxidation of cooking oil progresses by losing electrons. → A large number of electrons released from Karatto-kun's electrode plates prevent electrons from escaping the molecules of cooking oil, thus preventing oxidation and reducing degradation. 〇 It is said that lowering the set temperature by 10 degrees halves the oxidation speed. → Karatto-kun efficiently transmits heat through the convection of electrons from the electrode plates, allowing for crisp frying and preventing degradation even at lower set temperatures. 〇 Evaluation test results by Miyagi University, Faculty of Food Industry (excerpt from report) - Savings in frying oil usage. - Delayed degradation of frying oil. - Reduced frying time. - Suppressed oil odor, reduced by approximately 60%. 〇 It has become a target product for emergency measures against rising prices of imported wheat and other food raw materials. 〇 Certified as part of the "4th Miyagi Excellent MONO" supported by Miyagi Prefecture and others.

• Cooking facility equipment and supplies

There are two types of electrostatic discharge casters: conductive wheels that conduct static electricity and antistatic wheels that release static electricity. 〇 Conductive wheels 〇 Antistatic wheels They address issues such as fires caused by static electricity sparks and contamination from dust adhering to sensitive workpieces and tires. 〇 Conductive wheels ・Advantages Electrical resistance value / 1×10(4)Ω or less Can ground the electricity from the cart to the floor Almost does not accumulate static electricity due to being a conductor ・Disadvantages Must be used on conductive floors such as iron or conductive flooring Available only in black color May leave color on the floor 〇 Antistatic wheels ・Advantages Volume resistivity / 10(7) to 10(10)Ω・cm Temporarily charged electricity is released into the atmosphere Effective in a wide range of applications regardless of flooring material Does not contaminate the floor due to being carbon-free ・Disadvantages Accumulates a certain amount of static electricity *For more details, please refer to the PDF document or feel free to contact us.*

• Material handling systems and equipment
• maintenance
• Trolley

Even if the shelf tag is rewritten twice a day, it has a power-saving design that results in a battery life of 10 years, which is twice the usual duration. The Newton ESL has effectively eliminated the need for battery replacement in general use. In a dynamic pricing environment where it is rewritten 10 times a day, the frequency of battery replacement is halved. Additionally, rewriting is fast. It can rewrite 3,000 units in under 5 minutes (less than 0.1 seconds per unit), which is 8 to 10 times faster than typical electronic labels. ● Other Features - Can be used in water-prone environments due to its IP67 protection structure - Over 80% more durable than conventional models - Can retain data for up to 7 screens - Screen resolution is improved by several tens of percent compared to competing products - Picking support with 7-color LEDs and physical buttons - Controlled, managed, and monitored by the Advanced Information Management System (AIMS) - Can control up to 50,000 electronic labels per gateway - Automatically selects from over 60 channels to prevent radio interference - Models available for use in cold storage down to minus 25 degrees - Uses standard commercially available coin batteries - Also supports NFC *Battery life is for standard models of 2.2 to 4.3 inches. The battery life for cold storage models is 3 years.

• Electronic Shelf Label (ESL)

This is an ultra-low 25mm stretch film wrapping machine that is unmatched. Its thin design allows for a gentle slope, making it easy to drive onto. The slope can be installed in three directions, increasing layout flexibility. It significantly improves the efficiency of manual film wrapping for palletized goods and reduces working time. - The electric turntable operates with a simple action of stepping on the footswitch. - It uses our own gear motor, achieving compact size, low power consumption, and low cost. - The table rotation speed is variable via an inverter. - It is designed for single-phase 100V, allowing for flexible installation locations.

• others

It is suitable for the transportation of banknotes, cards, and other items. By improving grip strength, it maintains high transport capacity stably. It also excels in ozone resistance, making it suitable for ozone cleaning and deodorization environments. Features: - Stable maintenance of high transport capacity due to improved grip strength - Excellent ozone resistance, suitable for ozone cleaning and deodorization environments - Superior cold resistance, with minimal rubber degradation in cold regions and outdoors - Made from environmentally friendly non-halogen EPDM rubber Applications: - Banknote recognition machines - Card readers - Vending machines EPDM belts are made to order. For more details, please refer to the catalog or feel free to contact us.

• others

It excels in heat resistance, achieving a long lifespan in high-temperature environments. It also has excellent oil resistance, reducing the impact of oil. Features: ● Excellent heat resistance, achieving a long lifespan in high-temperature environments ● Excellent oil resistance with minimal swelling due to oil ● Low outgassing components Applications: ● Vacuum thin film equipment ● Machine tools ● Semiconductor and LCD manufacturing equipment ● Steelmaking lines ● High-temperature roll film equipment Fluorine belts are made to order. For more details, please refer to the catalog or feel free to contact us.

• others

A timing belt that adopts the principle of the herringbone tooth gear, achieving smooth engagement. The right 10-degree herringbone twist angle enables low noise. Features: ● Achieves low noise due to the right 10-degree herringbone twist angle. ● Realizes low vibration due to small angular velocity fluctuations. Applications: ● CT scans The pulleys for the herringbone GT belt are specialized pulleys. The herringbone GT belt is made to order. For more details, please refer to the catalog or feel free to contact us.

• others

Special treatment has been applied to the tooth fabric, achieving a reduction in dust generation during initial drive. Additionally, the special treatment of the tooth fabric enables smooth engagement with the pulley, resulting in low vibration. Features ● Special treatment applied to the tooth fabric to reduce dust generation during the initial drive ● Special treatment of the tooth fabric enables smooth engagement with the pulley and achieves low vibration Applications ● Medical equipment ● Image processing equipment ● Office automation equipment ● Measuring instruments RF belts are made to order. For more details, please refer to the catalog or feel free to contact us.

• others

Traditionally, multi-axis transmission and reverse rotation drive, which were only considered with chains and gears, demonstrate their power. Features: ● Multi-axis transmission utilizing the back of the belt is possible ● Reverse rotation drive similar to gears is possible Applications: ● Roll drive ● Printing machines ● Food machinery ● Textile machinery The Twin Power Belt is made to order. For more details, please refer to the catalog or feel free to contact us.

• others

The base is equipped with ethylene propylene rubber, which does not damage the floor surface due to its rubber grounding. It is a lightweight anti-vibration type adjustable bolt that makes it difficult for machine vibrations to be transmitted to the floor. Since non-migratory rubber is used, there will be no traces left on the floor even if the machine is moved. A nylon washer is used between the cup and the bolt for smooth rotation. There are options equivalent to SS400 and SUS304.

• Work tools

The entire pedestal is covered with a styrene-butadiene synthetic rubber. By providing grooves at the bottom of the large pad, a non-slip effect is achieved, making it safe even in environments with a lot of water usage. It contains a steel core inside. It is suitable for machines with micro-vibrations. It is manufactured to SS400 equivalent and SUS304 equivalent standards.

• Work tools

The base is equipped with silicone rubber, which prevents damage to the floor surface due to its rubber contact. It is a lightweight vibration-damping type adjustable bolt that excels in oil and solvent resistance and is less likely to transmit machine vibrations to the floor. A nylon washer is used between the cup and the bolt for smooth rotation. There are options equivalent to SS400 and SUS304.

• Work tools

The base is equipped with chloroprene rubber, which does not damage the floor surface due to its rubber grounding. It is a lightweight vibration-damping type adjustable bolt that excels in heat resistance and is less likely to transmit machine vibrations to the floor. Nylon washers are used between the cup and the bolt for smooth rotation. There are equivalents to SS400 and SUS304.

• Work tools

The base part is cut into a D shape. By changing the base shape from a circle to a D shape, it prevents interference between machines and ensures that the base, which protruded from the main unit when placed against a wall, does not become an obstacle when moving closer. It allows for safe installation in a compact space. It is manufactured with materials equivalent to SS400 and SUS304.

• Work tools

This is an anchor-driven type that emphasizes stability by providing thickness and bulging in the receptacle part. The strength against lateral swaying of the fixed part has increased. The load-bearing capacity has also improved, and it has a structure that is strong against bending. It is suitable for users who require stability during the installation of conveyors and industrial equipment, as well as strength against lateral swaying of the anchor fixing part.

• Work tools

We offer a variety of backing materials (covers) to suit different applications. Here, we would like to introduce our representative lineup. We also accept special processing such as hole drilling and tooth grinding. For other processing inquiries, please contact us. For more details, please refer to our catalog or feel free to contact us.

• others

1. High Reliability Due to its snap-fit design, there is no variation in installation strength like with adhesives or fusion, allowing for the realization of highly reliable profile belts. 2. Easy to Repair The snap-fit profile allows for easy attachment and detachment, making recovery from issues such as damage straightforward. 3. Variety of Materials Available Compared to adhesive or fusion methods, there are fewer restrictions on belt and profile materials, allowing for easy installation of metal and resin profiles. 4. No Processing Required on the Belt Body Even when using medium to large profiles, strength can be maintained simply by snapping them in, eliminating the need to drill holes or pass screws through the belt, thus avoiding concerns about strength reduction. 5. Cost Reduction There are cost advantages compared to fusion methods.

• others

Due to the adoption of a manufacturing method that does not create joint sections in the belt, uniform strength is achieved. It also excels in tension retention characteristics. Additionally, a new lineup of non-metal aramid core wire type (T10) has been introduced. The new manufacturing method, which does not create grooves at the bottom of the belt teeth, has improved bending performance. Stress is not concentrated on the core wire near the grooves, resulting in enhanced bending performance.

• others

A long urethane timing belt made of thermoplastic polyurethane resin, characterized by being hygienic and clean, having excellent processability, and being able to accommodate unlimited lengths. Endless type: A belt molded so that the core wires are embedded in parallel, processed into an endless type of any desired length. Open-end type: A belt molded so that the core wires are embedded in parallel, cut to any desired length, and in an open-ended form.

• others

This is an anchor driving adjusting bolt with a rib on the flat side and a bulge in the base section, designed to be strong against bending. By changing the shape of the receptacle, we have increased the receptacle strength to about twice that of the A series without changing the thickness. - Three ribs have been added between the hole for the anchor bolt and the curved part of the receptacle. - The curved part of the receptacle has been made even larger. There are versions equivalent to SS400 and SUS304.

• Work tools

This is an adjustable bolt that is anchored to the floor to prevent the machine from shaking due to vibrations generated by the machine. It has a structure that allows for some degree of play between the washer and the bolt. By allowing the nut at the bottom to be free, it eliminates wobbling and swaying of the screw shaft, accommodating unevenness in the floor and preventing lateral movement of the frame. It is suitable for situations where the upper part is vibrating and moving slightly, such as with conveyors. Even when the operating machine comes to a stop, the bolt does not move or fall over. It is manufactured to standards equivalent to SS400 and SUS304.

• Work tools

This is the most common specification for securing equipment to the floor by driving in anchors. It is suitable for conveyors and machines that vibrate from above. When the machine operates with vibration, it may cause positional shifts due to prolonged use. Using this type provides peace of mind. The fixation of the receptacle and bolt is similar to N, where the protruding part of the bolt is inserted into the receptacle, and the nut is pressed in. It can be easily secured with anchor bolts. Please use anchor bolts. The hole for the anchor bolt is 14 mm. Use a 12 mm anchor bolt. Bolts shorter than 12×70 are not recommended for complete fixation due to safety concerns. *The screw shaft rotates and tilts slightly (3° to 4°). There are equivalents to SS400 and SUS304.

• Work tools

It is suitable for adjusting heavy machinery. It is a bearing encapsulated type. The lightweight anti-vibration type makes it difficult for the machine's vibrations to be transmitted to the floor. Due to the use of thick bolts, stability is excellent. Even for machines that are not heavy-duty, smooth adjustments are possible. Structure: A bolt passes through the base, and a washer is placed on the protruding part of the bolt, which is then crimped. The thrust bearing is built into the base but is slightly higher than the height of the base. This structure allows the bearing to bear the load applied to the bolt. To ensure smooth movement of the bearing, please use it with a load of up to 1 ton if possible. To prevent dust from entering the thrust bearing, it is covered with a PP washer. It is manufactured to be equivalent to SS400 and SUS304.

• Work tools

It is suitable for adjusting heavy machinery. Due to the use of large-diameter bolts, stability is outstanding. Since bearings are included, height adjustments can be made smoothly with minimal force, even when the equipment is installed. Structure: A bolt passes through the dish, and a washer is placed on the protruding part of the bolt, which is then crimped. The thrust bearing is built into the dish but is slightly higher than the height of the dish. This structure allows the bearing to bear the load applied to the bolt. To ensure smooth movement of the bearing, please use it with a load of up to 1 ton if possible. To prevent dust from entering the thrust bearing, it is covered with a PP washer. It is manufactured to equivalent standards of SS400 and SUS304.

• Work tools

HW2 uses a large forged adjustable bolt with a wide base. By making the base larger, stability is increased, and the load on the floor surface can be distributed. * It is 66% larger compared to the same weight. * Standard φ60 [H]: φ80 [HW] / φ100 [HW2] The base is made of forged material. A long adjustment bolt with a threaded section is also available. Dimension cuts can be made upon request. * The threaded shaft rotates and can tilt slightly to accommodate a loose incline (3° to 4°). It is manufactured with materials equivalent to SS400 and SUS304.

• Work tools

The HW uses a forged adjustable bolt with a large receiving plate. By making the base larger, stability is increased, and the load on the floor surface can be distributed. * It is 33% larger compared to the same weight. * Standard φ60 [H]: φ80 [HW] / φ100 [HW2] The receiving plate is forged. A long-threaded adjustment bolt is also available. Custom dimension cuts can be made upon request. * The screw shaft rotates and can tilt slightly (about 3° to 4°) to accommodate gentle inclines. It is manufactured with materials equivalent to SS400 and SUS304.

• Work tools

This is a heavy-duty adjustable bolt with a rubber coating made of chloroprene rubber baked onto the forged receptacle part. It will not damage the floor surface, making it suitable for use on high-quality flooring materials. The aesthetic appeal is enhanced by the rubber coating, which is also effective as a non-slip feature. It is manufactured in materials equivalent to SS400 and SUS304.

• Work tools

We use a receptacle made of hot-forged products. The protruding part of the bolt passes through the hole in the receptacle and protrudes from the bottom of the receptacle. Since the protrusion is pressed, the bolt will not fall out. We can also manufacture a W-type with a thrust bearing that allows for easy bolt adjustment. *The screw shaft rotates and can tilt slightly (1° to 2°) to be used even on a gentle slope. It is manufactured in materials equivalent to SS400 and SUS304.

• Work tools

Compared to the old model (D-A/D-B), the diameter of the receptacle is designed to be smaller, making it space-saving. Features: The base has been miniaturized (Bolt φ12: Base φ55 → φ50 / Bolt φ16: Base φ75 → φ60). The screw shaft rotates and can tilt slightly (3° to 4°) to be used even on a gentle slope. *Please let us know if you want to eliminate the play between the screw part and the receptacle. It is manufactured with materials equivalent to SS400 and SUS304.

• Work tools

We mold special plastic into trays, so it won't dirty or scratch the floor. The plastic parts are elastic, have a good tactile feel, and excel in aging resistance and high-temperature resistance (they do not deform even at 100°C). They are also beautifully finished in appearance, making them suitable for all types of machinery and office equipment. Features: The screw shaft rotates and tilts slightly to be usable even on a gentle slope. *Please let us know if you want to eliminate any play between the screw part and the tray. There are equivalents to SS400 and SUS304. The plastic for M8 and M10 is polyvinyl chloride, while M12, M16, and M20 are made of elastomer.

• Work tools

This is a standard type that can be used for adjustment bolts of all machines. If used in large quantities, such as for conveyor legs, we recommend this inexpensive standard cup type. Features: The screw shaft rotates and tilts slightly to accommodate loose inclines (3° to 4°). *If you want to eliminate the play between the screw part and the cup, please let us know. There are equivalents to SS400 and SUS304. RoHS compliant.

• Work tools

This is a collaboration with KHK rack and pinion, which is optimal for robot drive axes, using Nabtesco's GH series precision reduction gear. The Nabtesco GH series is a high-speed gear head that effectively harnesses the capabilities of servo motors, further pursuing ease of use based on the precision reduction gear RV(TM), which boasts a proven track record in various applications and markets worldwide. Kohara Gear Industry is a leading company in standard gears, boasting an industry-leading selection. By standardizing dedicated pinions that are optimal for the GH series and combining them with KHK standard racks, we have achieved a design-free and short delivery time. Additionally, we offer a "Robot Drive Axis Simple Selection System" that allows for simultaneous selection of "reduction gear + rack & pinion." # Please refer to the link below. It is expected to significantly contribute to reducing design time.

• others

For installation with keys or set screws, please request the "J Series." This is a product that standardizes the dimensions of gear hole diameters, keyways, and tapped holes. About the J Series: ● KHK's unique standard additional processing products This series consists of 50 items and 12,400 types based on standard gear blank products, with hole diameters, keyways, and mounting hole dimensions standardized according to KHK's unique specifications. ● Pursuing production efficiency and quality We pursue production efficiency and quality through the latest machinery and JIT production lines. We provide reliable products through additional processing performed by the manufacturer. ● Quick delivery to your hands We quickly respond from the inventory of standard gear products using JIT production lines. Completion will be within 2 to 7 working days (excluding lead time) from the order date.

• others

■Features of Hardened Plus - This is a standard gear series listed in the catalog. - Orders are clearly indicated as "Catalog Code + H" for the applicable products. - The actual delivery time until hardening is completed is 4 working days (delivery may take a few additional days). - High-frequency hardening increases tooth surface strength by approximately 4 times. - Additional prices are clearly stated in the catalog. - Supports the J series for hole processing (the actual delivery time until processing is completed takes 6 to 11 days). Our company stocks thousands of Ohara gear products to meet our customers' timely needs.

• others

We have introduced the latest laser hardening equipment and standardized laser-hardened CP racks as the first in Japan among standard gear manufacturers for rack tooth surface hardening. By applying laser characteristics, we have reduced distortion and increased tooth surface strength to more than twice that of conventional SRCPF racks. Additionally, through the efforts of Kobara Gear Industry, the hardening precision has improved from grade 5 to grade 4. ■ Laser hardening is more cost-effective for longer lengths For racks longer than 1000mm, conventional hardening required significant time for distortion correction after heat treatment. Laser hardening can be performed precisely on the necessary areas, resulting in less distortion, simplified processes, and reduced time, leading to cost savings. The longer the rack, the greater the effect. The KHK hardened rack series includes three types: carburizing hardening, high-frequency hardening, and laser hardening. Please use the optimal KHK hardened rack according to your application. Our company stocks thousands of Kobara gear products to meet our customers' timely needs.

• others

The Nissay battery-powered gear motor can be driven by commercially available drivers from other manufacturers, in addition to the dedicated driver. Furthermore, through collaboration with driver manufacturers and sales agents, we provide a variety of optimal driver options and technical support documents for various applications. In addition to the parallel axis type, we also offer orthogonal axis gear reducers, allowing for more flexible configurations. With a wide variety of V types, you can choose according to the mechanism of the equipment. The high-output and compact SD type enables high-speed movement and space-saving design.

• maintenance

The small-diameter rubber wheels that have been popular in the Hammer Caster 420G/420E/420A/420K/155 series will be discontinued and integrated into the new elastomer wheels. (Rubber wheel diameters: 25/32/38/40mm) Compared to the previously used general-purpose soft rubber wheel material, the new elastomer wheels offer nearly equivalent performance. Additionally, while rubber wheels may cause marking on floor surfaces depending on the environment, elastomer wheels have the advantage of suppressing this occurrence. *For more details, please refer to the PDF document.

• others

We use a durable plunger pump. With a temperature sensor-based electronic control boiler and an infrared frame control system, we minimize discharge temperature fluctuations and automatically stop in case of combustion failure. It is equipped with a dry operation prevention feature. - Room temperature water - 80°C hot water - 120°C steam Additionally, detergents can also be discharged.

• Building Cleaning Equipment
• cleaning

Electrical equipment is used under various conditions, and its lifespan is affected by factors such as installation environment, load conditions, and maintenance status. By continuously monitoring and understanding the installation environment of the equipment, it enables improvements in the environment and appropriate maintenance. The MES series of composite environment sensors contributes to smartization and optimal equipment maintenance efficiency based on the acquired environmental data. - Measures temperature, humidity, and insulation resistance - Data logging capacity is up to 40,000 points - Data collection can be performed via USB connection - Sensor units are replaceable

• Other measuring instruments

At Gates Unitta Asia, we offer two types of long-length belts. 【Power Grip Long Length Belt】 This is a cut-end long-length belt that incorporates a new manufacturing method, resulting in reduced belt thrust and increased vertical rigidity. 【Open End Belt】 This is a cut-end long-length belt. Custom specifications can also be produced. For more details, please refer to the catalog or feel free to contact us.

• others

The Poly Chain GT Carbon Belt is an ultra-high torque timing belt that rivals chain drives. 1. By using high-strength polyurethane in the main body and suppressing elastic deformation under load, it achieves transmission capabilities that surpass rubber belts. 2. The tooth surface is coated with a special high-strength canvas that excels in wear resistance, improving durability in high-load areas. 3. By employing carbon with very low elongation in the core, proper engagement during power transmission is maintained, enabling high torque transmission. The Poly Chain GT Carbon Belt has strong resistance to water, oil, and chemicals, and can be used over a wide temperature range. Even in tests conducted in environments where water is present, there was no significant impact on dimensions or strength. Since its launch in 2008, it has been adopted in numerous equipment machines primarily as a replacement for roller chains. Recently, its use has expanded in semiconductor manufacturing equipment, food machinery, and logistics equipment, and it is also being developed for new markets such as collaborative robots, lithium battery equipment, and plant factories. For more details, please refer to the catalog or feel free to contact us.

• others

This is a basic product of toothed belts (JIS, ISO standard tooth profile). The trapezoidal tooth profile toothed belt was invented by Uniroyal in the United States (now Gates Rubber Company) in 1945. It conforms to JIS and ISO standard tooth profiles. It is used in various applications. By continuously refining the technology of material composite, the NITTA Group's Gates Unitta Asia products respond to the demands of the times. For more details, please refer to the catalog or feel free to contact us.

• others

A tooth belt with an arc tooth profile developed through the analysis of the forces transmitted to the belt teeth. By increasing the height and size of the belt teeth, we have achieved an increase in the transmission capacity per tooth. It is used in various locations. The Gates Unitta Asia products of the NITTA Group continue to respond to the demands of the times by refining the technology of material composite. For more details, please refer to the catalog or feel free to contact us.

• others