高津伝動精機 List of Products and Services

This is a timing belt that adopts a new circular arc tooth profile and offers various configurations to accommodate special environments. It features a toothed belt with an involute engagement based on the new circular arc tooth profile. By closely approximating the pulley tooth shape and the belt tooth shape created by involute motion, it achieves excellent transmission performance and minimal backlash. The minimal backlash and the unique centering effect provided by the new circular arc tooth profile enable high positioning accuracy and precise rotational transmission.

• others

- Large diameter tire of φ330 - Narrow body with a total width of 480mm - Water supply can be directly connected to the water supply or from a separate tank - Can use water at 60°C - Standard equipped with a detergent injector

• Building Cleaning Equipment
• cleaning

A high-strength timing belt that maintains the advantages of the new arc tooth profile and arc tooth profile while improving the belt construction materials to increase transmission capacity. This is the next-generation standard that represents the top tier of Gates Unitta Asia's rubber timing belts. The tooth profile of the pulley and the tooth profile of the belt are approximated through involute motion, achieving both smooth engagement and excellent transmission performance. Additionally, the use of high-strength materials significantly increases transmission capacity, allowing for a compact design through narrower belt widths. The use of high-strength materials also improves tooth jump torque.

• others

Outstanding mobility with a battery type. It can easily navigate through complex production lines and perform cleaning tasks. Since it dilutes the detergent with rinsing water, removes dirt with a brush, and vacuums it up, drainage facilities are not required.

• Building Cleaning Equipment
• cleaning

Instead of using a floor cleaning method that splashes water everywhere, this system uses high-temperature, low-pressure steam that lifts dirt and a 0.9kW vacuum to suck it up, eliminating the need for drainage facilities. Because it dries quickly due to the high temperature, it helps maintain a nearly dry environment. - Steam at 160°C/0.6MPa can be mixed with detergent and sprayed. - It can mix hot water and steam, making it easy to remove severe oil stains. - The vacuum's wastewater tank has a large capacity of 13L and automatically stops when full. - It uses an electric heater, making it odorless and free from contaminants.

• Building Cleaning Equipment
• cleaning

- Equipped with a lithium-ion battery, compact and lightweight - Compact size of 41cm in width, effectively cleans even in narrow areas - Height is kept to about 30cm, allowing it to fit under tables and benches - Can clean and collect dirty water while moving forward or backward - Set weight of about 20kg, can be moved with one hand by a man using the handle on top

• Building Cleaning Equipment
• cleaning

- Optimal cleaning can be achieved with a self-leveling brush. - Smooth maneuvering with a large handle and large wheels. - Equipped with a super powerful 3-stage vacuum motor for effective dirty water collection. - The battery type features a quiet eco mode function. - Antibacterial tank included to suppress the generation of unpleasant odors inside the tank.

• Building Cleaning Equipment
• cleaning

This is a powerful electric deck brush that can be continuously polished with a rotation speed of 1300 RPM powered by an AC100V power supply. Weighing only 5.6 kg (Type 2), it is lightweight enough to clean sides and narrow spaces.

• Building Cleaning Equipment
• cleaning

No power supply is required. With the adoption of a large boiler with 56,000 kcal, the temperature rises quickly, allowing for steam cleaning at a maximum temperature of 150°C. The fuel tank is shared between the boiler and the diesel engine, reducing the hassle of refueling.

• Building Cleaning Equipment
• cleaning

As a super high-pressure model, it is relatively compact. It is easy to transport with a hook installed, and it also has casters for manual movement. With the adoption of a fuel-efficient boiler, it can operate continuously for 6 hours.

• Building Cleaning Equipment
• cleaning

The effectiveness is tremendous against stains that are difficult to remove with room temperature water and stubborn dirt! The Hot Box is a boiler unit that connects to a room temperature water high-pressure washer. It can discharge hot water at a maximum of 135°C and 20L/min at a maximum pressure of 20MPa. An attachment that prevents hot water from splashing on the floor is also available as an option.

• Building Cleaning Equipment
• cleaning

The inspection window "FREEPA" from Asahi Sangyo has unpainted areas at the welding points of the frame. This eliminates the hassle of removing paint during welding, improving workability and quality. Additionally, the connecting pins for the lever and hinge are not fixed by welding but use dedicated snap pins, making removal and installation easy. ■ Features of FREEPA Inspection work and cover replacement are simple! Designed with dust and rain protection in mind! Lever reinforcement is done through press forming for safety! Size and material changes can be accommodated in millimeter increments! Welding work can be performed easily! (Utility model registered: No. 3199386) ■ Others We also manufacture flanged and special shapes beyond the basic design. Utility model registered: No. 3177962 Patent application pending. *For more details, please refer to the catalog or feel free to contact us.

• Inspection hatches, manhole covers, and ditch covers
• maintenance

Is the floor waxing just a topcoat over the existing wax? If you apply a new layer of wax without removing the wax already on the floor, you will end up covering the dirt embedded in the wax with more wax, resulting in a sandwich of wax and dirt building up. The Micromag 600-II achieves uniform and flawless cleaning and grinding through ultra-high-speed vibrations, delivering overwhelming speed and finish! Even with zero detergent, it demonstrates high cleaning power with minimal water through vibration cleaning. The used water is collected in a recovery tank, allowing you to start waxing immediately without mopping, which leads to time savings.

• Building Cleaning Equipment
• cleaning

This is a powerful fan that operates on household AC100V power and has a variable output ranging from 10W to 210W. At maximum output, it can deliver wind at a speed of 2m to a distance of 14m. It features a large fan with a diameter of 1m. Compared to conventional models, it can provide effective local ventilation and heat countermeasures in a wider area through continuous airflow. The direct drive design allows for a clean layout on the back.

• others
• Ventilation and smoke exhaust equipment

This is a low-floor (300mm→165mm) type with a load capacity of 1,000 kg, equipped with guide-less operation, a feature of S-CART. It is designed to accommodate the transportation of workpieces that need to be accessed from below. The guide-less operation creates a map of the area based on features detected by laser sensors to estimate its own position, or it can also achieve automatic operation using an industry-first vision system that adapts to environmental changes through the latest image analysis technology. This AGV emphasizes ease of use, featuring standard non-contact charging capabilities. *As of April 1, 2023, "Nidec Sympo Corporation" has changed its name to "Nidec Drive Technology Corporation."

• Automated guided vehicles (AGV, RGV)

This is an energy-saving blower that can perform exhaust and ventilation within the factory using minimal power. It can deliver air up to 50 meters away, preventing air convection and improving the efficiency of air conditioning. Compared to conventional blowers, the Follow Wind FW793Ci/FW791Ci can deliver air using about one-fourth of the power consumption. It also features low noise levels, contributing to the improvement of the working environment.

• others
• Ventilation and smoke exhaust equipment

Equipped with a large fan with a diameter of 1 meter. It enables effective local ventilation and heat countermeasures in factories through continuous airflow over a wide area. - Can be used in places where oil mist and dust are generated. - Can also be used in flammable areas.

• others
• Ventilation and smoke exhaust equipment

The noise level is 59dB, which is considered low noise. *60dB: Normal conversation / Quiet passenger car (Source: Soundproofing Equipment Association) Equipped with a large fan with a diameter of 1 meter. It can provide effective local ventilation and heat countermeasures in the factory over a wider area with continuous airflow than before. The off-timer prevents forgetting to turn it off at the end of work, cutting unnecessary power consumption. The direct drive results in a neat layout at the back.

• others
• Ventilation and smoke exhaust equipment

This is a mist cooling type fan equipped with a 550W large fan. It generates 20 liters of mist per hour, creating a cool environment through evaporative cooling. - It can generate fine mist without a fine mist nozzle due to centrifugal force. - There is no clogging since it does not use a pump. - It is energy-efficient as it does not use high-pressure pumps or powered sprayers. - It connects directly to a water hose, eliminating the hassle of refilling. - The particle size of the mist can be freely adjusted. - It is designed for outdoor use.

• Heating and cooling equipment and facilities

■ Discharge of High-Temperature Air In casting and forging operations, as well as high-altitude high-heat work, creating a flow of air towards the rooftop fan efficiently expels high-temperature air, improving the working environment. ■ Induced Ventilation By directing dust generated in manufacturing lines towards the exhaust area with a strong, straight-flowing wind, effective ventilation can be achieved. ■ Removal of Smoke Fumes generated during the welding process can be efficiently purified from the factory air by directing them to a collection device. ■ Uniformity of Indoor Temperature Circulating the air within a factory equipped with air conditioning can equalize indoor temperatures and lower the perceived temperature. It also helps prevent condensation. ■ Cooling and Drying Effective for cooling castings and aluminum die-cast products, drying paint, drying parts after cleaning, and drying building materials and paper products. ■ Removal of Exhaust Gases In places like automobile repair shops and distribution centers where exhaust gases are generated, they can be effectively removed by directing them outdoors or to an exhaust system.

• others
• Ventilation and smoke exhaust equipment

In the logistics and retail industries, there has long been a demand for the transportation of small items weighing less than 100 kg, such as in-house transport and shelf stocking from the backroom, which led to the creation of the S-CART Mini. The miniaturization has made it easier to operate in narrow spaces and for AGVs to pass each other, while also meeting the demand for fast transport of lightweight loads in environments that can be isolated from people, resulting in increased travel speed. - Reduced footprint by up to 56% compared to the S-CART-V100 - Maximum load capacity of 80 kg (a first in the industry) - Speed doubled compared to the S-CART-V100, reaching 120 m/min (with a load of 60 kg) - All conventional functions have been retained.

• Material handling systems and equipment

An electromagnetic switch is a device that combines an electromagnetic contactor, which opens and closes an electrical circuit, with a thermal relay that protects the motor from overload. PSK/RSK are made to order, with a delivery time estimated between 2 to 4 weeks. * Models with shorter delivery times are available up to 220AF. * Delivery times are provisional. Please inquire for details. - Standardization for rail mounting (6JC–50J, TJ-18N) - Easy-to-read coil ratings (6JC–50J) - Easy coil replacement (11J–21J) - Easy maintenance and inspection of contacts (11J–800J) - Improved reliability of auxiliary contacts with twin contacts (6JC–12J, 21J–800J) - Long electrical lifespan of 2 million cycles (12J–35J) - 1a1b configuration for thermal relay output contacts (TJ-18–T-600) At Togami Electric, we offer not only electromagnetic switches but also low-cost economic types and reversible electromagnetic switches, as well as standalone electromagnetic contactors and thermal relays.

• Power distribution and control panels

By installing it on the roof and extracting heat to discharge it outside, we improve the working environment of factories and warehouses. - Efficient heat discharge - High ventilation capacity - Excellent rust prevention performance - Feedback from know-how cultivated with a frost prevention fan system that holds a 60% domestic market share

• others

Sankyo Kikai is highly regarded and trusted as a pioneer of universal joints in a wide range of fields. The S-GX is a shaft-mounted unit composed of the precision-type universal joint S type and the joint slide GXSA.

• others
• Work tools

Sanhō Kikai has earned high praise and trust as a pioneer of universal joints in a wide range of fields. The H-GX is a shaft-mounted unit composed of the precision-type universal joint H type and the joint slide GXSA.

• others
• Work tools

Sanhō Kikai is highly regarded and trusted as a pioneer of universal joints in a wide range of fields. The B-GX is a shaft-mounted unit composed of the high-torque type universal joint B and the joint slide GXSA.

• others
• Work tools

This is a free roller for DC pulse rollers.

• others

CONVEYLINX-Ai2 is a driver card for DC pulse rollers that supports network communication. - Compatible with CC-Link IE Field Basic - Automatically supports EtherNet/IP, Modbus, and PROFINET Features - Easy setup with automatic configuration and dedicated software - Improved workability with reduced wiring and M8 connectors - High maintainability - Built-in ZPA function - Direct programming of ladder logic and more on the main unit

• Material handling systems and equipment

The "Air Picker & Air Gripper" is a new type of pneumatic holder that gently yet securely grips diverse workpieces with a wide contact surface. ● Air Picker A cylindrical hollow rubber body inflates into a donut shape when air is injected, making soft contact with a large area on the inside of the workpiece, securely holding it without causing any damage. ● Air Gripper A donut-shaped hollow rubber body inflates from the inside when air is injected, making soft contact with a large area on the outside of the workpiece, securely holding it without causing any damage. Please utilize this device, which is essential for automation in a wide range of fields including workpiece retrieval, transfer, transportation, insertion, sealing, and stopping. 【Features】 ● Soft yet secure grip ● Capable of handling workpieces of different diameters without changing size ● Lightweight and simple structure ● Internal gripping Air Picker ● External gripping Air Gripper The business including this product was transferred from Bridgestone Corporation to Prospira Corporation on July 1, 2022.

• others

Sanhō Kikai is a pioneer of universal joints, earning high praise and trust in a wide range of fields. Please use it for horizontal and vertical tension and push power transmission mechanisms. There are Y-type and T-type rod ends.

• others
• Work tools

Sanhō Kikai has earned high praise and trust as a pioneer of universal joints in a wide range of fields. The Joint Slide SPS can be used in combination with the S-type/B-type/H-type/K-type/HJ-type universal joints. The sleeve of the unit SPSAS is through-type. It is a combination unit of Shaft SPSS + Sleeve SPAS.

• others
• Work tools

Sanhō Kikai has earned high praise and trust as a pioneer of universal joints in a wide range of fields. The Joint Slide SPS can be used in combination with universal joints of types S, B, H, K, and HJ. The sleeve of the unit SPSOS is through-type. It is a combination unit of Shaft SPSS and Sleeve SPOS.

• others
• Work tools

Sanhō Kikai has gained high recognition and trust as a pioneer of universal joints in a wide range of fields. The Joint Slide SPS can be used in combination with universal joints of types S, B, H, K, and HJ. The sleeve of unit SPSO is through-type. It is a combination unit of shaft SPS and sleeve SPO.

• others
• Work tools

Sanhō Kikai has gained high recognition and trust as a pioneer of universal joints in a wide range of fields. The Joint Slide SPS can be used in combination with universal joints of types S, B, H, K, and HJ. The unit SPSA comes with a boss. It is a combination unit of Shaft SPS and Sleeve SPA.

• others
• Work tools

Sanhō Kikai has earned high praise and trust as a pioneer of universal joints across a wide range of fields. The Join Slide GX can be used in combination with universal joints of types S, B, H, K, and HJ. The sleeve of unit GXSO is through-type. It is a combination unit of shaft GXS and sleeve GXO.

• others
• Work tools

Sanhō Kikai has earned high praise and trust as a pioneer of universal joints across a wide range of fields. The Joint Slide GX can be used in combination with universal joints of types S, B, H, K, and HJ. The unit GXSA comes with a boss. It is a combination unit of Shaft GXS and Sleeve GXA.

• others
• Work tools

Miyoshi Kikai has earned high praise and trust as a pioneer of universal joints in a wide range of fields. At Miyoshi Kikai, we offer lubrication oil and oil-soaked pads for maintenance, as well as joint boots that cover the main body to prevent oil splatter as options.

• others
• Work tools

Miyoshi Kikai is recognized and trusted as a pioneer in universal joints across a wide range of fields. Lubrication of universal joints requires oil, but during high-speed rotation, centrifugal force causes the oil to scatter from the main body. At Miyoshi Kikai, we offer lubrication oil, oil-absorbing pads for maintenance, and joint boots that cover the main body to prevent oil scattering as options for maintenance.

• others
• Work tools

Sanhō Kikai has gained high recognition and trust as a pioneer of universal joints in a wide range of fields. - Maximum bending angle: up to 30° - Surface plating treatment - Shaft hole finishing with set screw included

• others
• Work tools

Sanhō Kikai is a pioneer of universal joints and has gained high recognition and trust in a wide range of fields. The HS/BS/HSS models are corrosion-resistant universal joints made of stainless steel. They are suitable for underwater, acidic, and alkaline environments, and are resistant to corrosion and heat. - Maximum bending angle: up to 30° - Additional processing: possible

• others
• Work tools

Sanhō Kikai is a pioneer of universal joints, gaining high evaluation and trust across a wide range of fields. The MS/MSS type is a corrosion-resistant small-diameter universal joint made of stainless steel. It is suitable for underwater, acidic, and alkaline liquids, and is resistant to corrosion and heat. - Maximum bending angle: up to 30° - Additional processing: possible

• others
• Work tools

Sanhō Kikai has gained high recognition and trust as a pioneer of universal joints in a wide range of fields. The HSD/BSD type is a double type of corrosion-resistant stainless steel universal joint. It is suitable for underwater, acidic, and alkaline liquids, and is resistant to corrosion and heat. - Maximum bending angle: up to 60° - Additional processing: possible

• others
• Work tools

Sanhō Kikai has earned high praise and trust as a pioneer of universal joints in a wide range of fields. The HS/BS/HSS models are stainless steel corrosion-resistant universal joints. They are suitable for underwater, acidic, and alkaline environments, and are resistant to corrosion and heat. - Maximum bending angle: up to 30° - Additional processing: possible

• others
• Work tools

Sanhō Kikai is a pioneer of universal joints, earning high praise and trust across a wide range of fields. The KZD type is a separate type with a removable body section. It allows for easy installation and replacement of the joint without removing the pillow block (bearing) of the curve conveyor. Other surrounding components can also be replaced quickly without taking much time. It has been treated with electrodeposition coating (black) for rust prevention, allowing for easy removal without being stuck due to rust. - Maximum bending angle: up to 30°

• others
• Work tools

Sanhō Kikai is highly regarded and trusted as a pioneer of universal joints in a wide range of fields. The KZ type is a separate type with a removable body. It allows for easy installation and replacement of the joint without removing the pillow block (bearing) of the curve conveyor. Other surrounding components, apart from the joint, can also be replaced quickly. It has been treated with electrophoretic coating (black) for rust prevention, allowing for easy removal without being stuck due to rust. - Maximum bending angle: up to 30°

• others
• Work tools