エフティーエス List of Products and Services

**Features** - Capable of detecting rebar, post-tension cables, voids, electrical wiring, and buried objects - Utilizes SFCW technology - Uses an iPad for the display device, allowing for easy operation and quick data processing - All four wheels are equipped with encoders and have thicker tires for better grip - Has a ground clearance of 8mm, allowing measurements without concern for minor unevenness - Powered by AA batteries, eliminating worries for air transport - Capable of taking six measurements in a single scan

• Non-destructive testing
• Reinforced concrete construction
• Concrete core removal

This is a Schmidt hammer manufactured by PROCEQ, specifically designed for measuring soft materials such as young concrete, gypsum board, and lightweight concrete, with a wide impact area (plunger). This type is often used for assessing early formwork removal.

• Reinforced concrete construction
• Concrete construction
• Non-destructive testing

Features ■ The amount of concrete supplied is controlled by a pressure sensor installed at the entrance of the extruder. ■ Pump variables can be set according to the type of material and the viscosity of the paste. ■ The pump and extruder are controlled in real-time. ■ Products can be created simply by inputting 3D CAD data.

• Reinforced concrete construction
• Drawing, tracing, CAD
• Concrete construction

Since it is possible to measure the polarization resistance and corrosion rate of concrete structures completely non-destructively, it is helpful for the maintenance and management of concrete structures!

• Reinforced concrete construction
• Concrete construction
• Concrete core removal

The 【STT Series】 is a testing machine that visualizes the twisting phenomenon (lead structure) of shafts using light diffraction. It enables rapid and reliable quality control right next to the machining process. Tests can be conducted in seconds, achieving a significant speed increase compared to traditional methods. The lineup includes "STT-NO," which performs direct inspections with an integrated magnifying glass; "STT-NK," which reads test results with a compatible digital camera; and "STT-NV," which reads with a compatible digital camera and conducts dynamic tests on a PC screen.

• Non-destructive testing

IDS GeoRadar, an industry leader in open-pit mining slope monitoring radar, has developed the HYDRA-G, which enables real-time monitoring of face deformation and slopes. The HYDRA-G uses IDS's cutting-edge ArcSAR technology to measure positions 200 meters away with centimeter spatial resolution every 30 seconds. The measurement accuracy is extremely high, capable of measuring below 0.1 mm. Environmental conditions (temperature, humidity) are automatically reflected in the measurement data for data correction. Additionally, images captured by the equipped optical and infrared cameras allow for visual confirmation of the monitoring area, enhancing data interpretation. It also features an early warning system that can issue alerts based on user-defined criteria. 【Features】 ● Real-time monitoring regardless of weather or time of day ● Measurement range: 100° (horizontal), 30° (vertical) field of view ● Measurement speed: data updates every 30 seconds ● Accuracy: below 0.1 mm ● Measurement spatial resolution: 20 cm × 8 cm (when measuring from 100 meters away) ● Equipped with correction functions for weather conditions and temperature (-20°C to +55°C) ● Alerts issued based on user-defined displacement values, speed, and reverse speed ● Capable of real-time processing

• Analysis and prediction system

The LMX200 ground penetrating radar can simultaneously detect shallow and deep targets, allowing immediate results to be verified on the display screen at the site. The LMX200 is widely used for locating utilities and is employed to identify and mark main utilities underground. It provides a safe method for locating underground power sources, including natural gas lines, oil and gas pipelines, cable television, fiber optics, state communication lines, distribution, traffic lights, and streetlights. It is also used to locate stormwater pipes, water pipes, purification systems, sewer laterals, and drainage PVC pipes. It is an excellent complement to conventional pipe and cable locators, capable of pinpointing and marking locations. The sensor operates in environments ranging from -40°C to 50°C, and can collect data at exploration depths of up to approximately 8 meters.

• Non-destructive testing
• Geological Survey
• Other measuring instruments

The temperature and strength of concrete are read at regular intervals. The CS sensor is not just a "temperature measurement" product but also a "data logger," allowing temperature data to be collected solely with the CS sensor. By using the included cable for a wired connection to Windows or iOS, data can be imported and analyzed using free software. Furthermore, by using the SRM (Sensor Reader Module), data can be transmitted via Bluetooth, enabling immediate data verification on your Windows or iOS device from a distance of about 10 meters. By obtaining data, the maturity of the concrete can be used to calculate its compressive strength. This aids in determining the timing for formwork removal, optimizing curing conditions, and optimizing concrete mixtures, contributing to shortened construction periods. Additionally, traceability from NIST (National Institute of Standards and Technology) is available, making it a highly reliable product. *Certificates can be issued upon request. [Main industries using this product] Civil engineering and construction.

• Other measuring instruments
• Non-destructive testing
• Geological Survey

The measurement principle is similar to thermal reflection, where light is irradiated onto the object, and the propagation time of heat is converted into coating thickness. Measurement can be performed regardless of specific materials or substances, and it is applicable to both powders and liquids.

• Measurement and Inspection

Stream-UP is a lightweight, vehicle-mounted GPR system that features multi-channel, multi-frequency, and dual polarization capabilities. It enables extensive data acquisition and analysis with ease. The measurement speed of the vehicle-mounted system is 60 km/h (with a maximum of 150 km/h), making it an innovative system. Additionally, the system is portable, allowing it to adapt easily to various exploration scenarios. Transportation and assembly can be handled by two people, and one person can prepare for exploration while operating the system. The multi-channel antenna of Stream-UP can conduct surveys without making contact with the ground, which reduces stress from the road on the antenna and significantly improves maintenance.

• Other measuring instruments
• Non-destructive testing
• Other analytical equipment

The Italian company IDS Georadar, a leader in the GPR industry, has applied cutting-edge ground-penetrating radar technology to tunnel backfill investigations. Stream T is an innovative non-contact GPR solution for tunnel backfill inspection. Stream T accurately explores and evaluates the thickness of tunnel linings, maps support structures, detects voids, and locates water ingress points.

• Non-destructive testing
• Other measuring instruments
• Analysis and prediction system

RockSpot is an innovative radar system that can identify, track, and notify in real-time about rockfalls, avalanches, and landslides. This small yet powerful radar detects small rockfalls that are far away much faster than the human eye can see. RockSpot is the industry's first end-to-end solution for detecting rockfalls and collapse incidents, filling the gaps in slope monitoring. It can detect a single rockfall event in real-time, allowing ground improvement workers to access details of the rockfall event. Statistics for all rockfall events are recorded in a database, enabling analysis of each event and the creation of appropriate risk zoning maps. By allowing for early warnings, RockSpot significantly enhances the protection of life and assets in many cases, elevating safety to the next level. RockSpot monitors continuously, day and night, 24/7. To achieve maximum effectiveness, all processing is done on-site. It is designed to be simple and compact to withstand all weather conditions, allowing the system to be installed anywhere.

• Geological Survey
• Analysis and prediction system
• Other measuring instruments

The IBIS-FM EVO tilt monitoring radar is designed to measure sub-millimeter displacements with the highest data quality and proven reliability. It provides semi-permanent safety and complete solutions for monitoring a wide range of known and unknown slope instabilities. The IBIS-FM EVO manages slope stability risks using the Guardian software, which is also used for radar monitoring in mining. It features a single user interface for all IDS radars and seamlessly integrates with Guardian FPM360, allowing users to benefit from the latest atmospheric corrections of IDS geo-radars.

• Other measuring instruments
• Non-destructive testing
• Geological Survey

The FT-4000, developed in collaboration with Dragon Corporation, is a portable ultrasonic thickness gauge for fiberglass and FRP. It features Echo-Echo functionality, automatic probe recognition, automatic probe zeroing, and an A/B scan model with a color LCD display. Like other models in the DC series, it has been customized according to our specifications, is affordably priced, weighs only 260 g (including batteries), and is easy to operate for anyone without individual differences.

• Non-destructive testing
• Other measuring instruments
• Other analytical equipment

The FT-6000, developed in collaboration with Dragon Corporation, is an ultrasonic thickness gauge that weighs only 260 g (including batteries) and can be easily handled without individual differences. It has been customized according to our specifications and employs a unique calibration method. This high-precision and high-resolution testing device is suitable for measuring the thickness of very thin materials at an affordable price. It features excellent functions such as automatic probe recognition, automatic zero calibration, and automatic placement of detection points. Additionally, it can store up to 10,000 measurement data within 100 files, and this data can be transferred to a PC without the need for software.

• Other measuring instruments
• Non-destructive testing
• Other analytical equipment

The ECHO FD developed by Danatronics is a portable ultrasonic flaw detector. By upgrading with optional software, it can also function as a corrosion and precision thickness gauge. For special applications, it offers a variety of dual transducers ranging from 5 to 10 MHz, including a pencil probe (12 MHz) for high dual and delay line use. The ECHO FD also utilizes contact and delay line probes in the range of 1 to 20 MHz. 【Features】 - Portable and easy to use - Usable as a corrosion and precision thickness gauge with optional software - Various types of transducers available for special applications

• Non-destructive testing
• Other measuring instruments
• others

The latest ground penetrating radar 'GS8000' developed by Switzerland's Screening Eagle (Proceq) employs step frequency continuous wave technology. This technology allows for scanning and mapping of objects at the highest resolution. It can measure both flat and rough terrains, and the scanned data provides accurate real-time 3D positioning. The obtained 3D images can be shared via a dedicated app. Additionally, by using it in conjunction with the GNSS receiver (MA8000), mapping with accurate location information is also possible. *FTS Co., Ltd. is the official distributor of Screening Eagle (Proceq) in Japan.

• Other measuring instruments
• Non-destructive testing
• Geological Survey

This is a portable residual stress (stress concentration area) detection device using the measurement principle of the MMM method (Metal Magnetic Memory Method). It complies with ISO 24497, allowing for the identification of defective areas before issues such as corrosion and fatigue occur, making it a valuable tool for preventive measures. It is particularly suitable for rough flaw detection in welds. 【Features】 ■ Complies with ISO 24497 ■ Easily detects residual stress (stress concentration areas) ■ Enables identification of defective areas before issues like corrosion and fatigue arise ■ Capable of detecting early-stage microcracks, slag in welds, and pores that cannot be detected by eddy current testing ■ Multi-channel operation ■ A wide variety of probe types available (4 types) to suit different applications ■ Can measure through coatings

• Non-destructive testing

The ultrasonic thickness gauge and ultrasonic flaw detector 'Smartor' developed by SIUI Co., Ltd. is an ultrasonic testing device that can switch between an ultrasonic thickness gauge and an ultrasonic flaw detector through software upgrades. In previous ultrasonic flaw testing, there has been a demand for improved visibility of display images under outdoor sunlight, as well as for miniaturization of the device's dimensions and weight. 'Smartor' addresses these challenges while also functioning effectively as a thickness gauge. Despite its compact size of 198x128x52 mm (weight: 0.9 kg), the device features a 5.7-inch LCD screen for better visibility, and with the inclusion of an "outdoor mode," it allows for good waveform observation even in sunlight. 【Features】 - Dustproof and waterproof robust housing (IP66) - Lightweight and compact design (0.9 kg including battery / 198x128x52 mm) - 5.7-inch LCD display with a high resolution of 640x480 pixels - Frequency filter: filter settings can be adjusted according to the application - Easy operation with an intuitive interface - Comprehensive flaw detection capabilities - Extensive thickness measurement functions - External connection ports: encoder, mini HDMI, SD card, USB

• Non-destructive testing

The use of Acoustic Pulse Reflectometry (APR) is suitable for inspecting heat exchangers and boiler tubes. It detects defects (such as holes, corrosion, and blockages) inside the tubes using a non-destructive and non-invasive method. The preparation for measurement is simply to clean and dry the inside of the tube. The measurement process is also very simple; you just insert the probe into the hole and inject the acoustic pulse. The machine records and analyzes the reflected echoes to detect defects. With its unique and sophisticated algorithm, it accurately identifies the location, type, and nature of the defects.

• Non-destructive testing

The permeability testing device [Permatol AC+] can easily measure the permeability performance of surface concrete in a completely non-destructive manner. It adopts a two-chamber cell structure that is less susceptible to surrounding influences, and the operation is user-friendly with a touch panel interface. It has various applications, including quality verification of cover concrete, confirmation of the effects of surface modifiers and coatings, and checking the performance of coatings. It is also registered as a NETIS technology (Registration Number: QS-150029-VE).

• Non-destructive testing

The Mat Tracker tracks the edges of paved asphalt lanes and automates the movement of the paver's side plates to ensure consistent overlap at joints. To ensure overlap, the screed foreman must always pay attention. By fulfilling this role, the Mat Tracker allows the operator to have time to perform other tasks. It also reduces the frequency with which the operator has to step outside the screed, significantly decreasing the risk of accidents. 【Features】 - Automation of screed side plate adjustment - Improved quality of joints - Enhanced density through perfect lane overlap - Reduced workload for operators

• Non-destructive testing

The ZRS 6060 (from Zenner) is useful for measuring the visibility of traffic signs and reflective materials using the retroreflection method. The device itself is lightweight, weighing approximately 2 kg, allowing for easy one-handed measurements. It also features a tilt function on the display, enabling the measurement results to be viewed from any angle. It is equipped with a high-resolution color touchscreen, allowing measurements to be taken under all conditions, day or night. 【Features】 - Equipped with an LED illumination system - Simultaneous measurement at three observation angles - Display tilt function - High-resolution camera included - Optional extension handle for measuring at high locations

• Non-destructive testing

This is an automatic replenishment device for powdered quick-setting agents at tunnel sites [Patent obtained: 5127734]. With the push of a button, replenishment work can be carried out, contributing to the efficiency and labor-saving of post-spraying operations. Additionally, the weight of the powder in the dispensing device is recorded every minute and saved to an SD card, enabling management of quick-setting agent consumption. The quick-setting agent is a strongly alkaline substance (pH 11), which has raised concerns regarding various health issues such as dermatitis and pneumoconiosis. This device can minimize dust concentration, allowing for safe use without contaminating the underground environment. [Features] - No need for replenishment work during spraying - Reduction of dust concentration - Management of quick-setting agent consumption is possible - Prevents the quick-setting agent from absorbing moisture, allowing for stable spraying

• Tunnel construction

The CMEX5 developed by TRAMEX can non-destructively measure the moisture content of concrete, just like the conventional CMEX2. It allows for easy measurement of moisture content by simply pressing it lightly against the concrete. It now features Bluetooth functionality, enabling the use of a dedicated app to check measurement values. Additionally, by using an optional pin probe, it can also be applied to measure the moisture content of wood, not just concrete. 【Features】 ■ Large and easy-to-read digital LCD (with backlight function) ■ Usable for materials other than concrete, such as wood (when using pin probe) ■ Spring-type measurement terminals that accommodate uneven surfaces ■ Very easy to hold and press against surfaces ■ Hold function (convenient for taking photos) ■ Bluetooth equipped (app available)

• Non-destructive testing

The Porosit+ surface water absorption test machine has been registered in the Ministry of Land, Infrastructure, Transport and Tourism's New Technology Information System (NETIS) in 2023. https://fts-ltd.jp/news/netis-porosit/ 【Measurement Procedure】 1. Set the adsorption base at the measurement location and activate the vacuum pump to create a reaction force, ensuring it adheres closely to the concrete surface. 2. Use a tube and syringe to inject water from the bottom of the water absorption cup. 3. Once water is injected to the top of the cylinder (water head: 300 mm), stop the water injection valve. *Approximately 10 seconds from the start. 4. After completing the water injection, visually measure the decrease in water due to absorption as a change in height (measure the water surface height 11 times at 1-minute intervals for up to 10 minutes). 5. Input the measured values into the measurement value input sheet. 6. The results will be automatically measured and displayed.

• Other measuring instruments

The RESI PD-Series developed by IML GmbH (Germany) allows for the diagnosis of wood decay through penetration resistance. By simply pressing the device against the object to be measured and turning on the switch, the results are easily displayed digitally. We also offer a range of products depending on the length of the drill.

• Surveying

The medication rack that connects family sentiments is equipped with a function to watch over family members even from far away. It helps address many concerns, such as forgetting to take medication, memory lapses, and the risk of heatstroke. 【Features】 - Notifies caregivers via email when medication is taken - Allows checking of medication status even from a distance - Detects danger with temperature/humidity alarm function - Early detection of dementia through forgetfulness emails - Medications can be accessed at any time - Large-capacity rack can store up to 60 days' worth of medication - No internet connection required

• Storage furniture

Highbright is a ground-penetrating radar solution specialized in the early detection of deterioration in concrete bridge decks. It features a 16-channel array antenna (approximately 1 meter wide), allowing for a large area to be measured at once. The software designed specifically for bridges (GRED HD BRIDGE) enables detailed 3D tomography exploration and provides three types of processing results: - Rebar corrosion map - Humidity map - Cover thickness map **Features** - Utilizes a 2GHz, 16-channel array antenna for detailed 3D tomography exploration. - The array antenna measures a wide area of 1 meter, significantly reducing inspection time to 1/16 compared to a single antenna radar. **Processing Result Display by Bridge-Specific Software - GRED HD -** GRED HD Bridge is designed to provide a rapid and effective bridge deck evaluation tool. The software automatically detects rebar position, depth, asphalt thickness, and concrete slab thickness.

• Non-destructive testing

The ultrasonic testing device PD8000 developed by Prosec can perform imaging of concrete structures on-site. Since it does not require coupling paste, preparation time on-site is minimized. The maximum exploration depth of concrete is 1 m (in the Basic mode).

• Non-destructive testing

Amberg has been engaged in shape management for tunnel construction using laser scanners for over 10 years, and this tunnel scanner can manage coordinate data in an absolute coordinate system in conjunction with a total station. 【Features】 - Measurement in an absolute coordinate system compatible with tunnel alignment - Approximately 3 minutes from measurement start to result display (about 5 minutes including positioning) - Data processing & analysis, data output, and report creation are possible when connected to a PC in the office - When a specified position is tapped on an in-tunnel tablet, the total station emits a laser beam.

• Other measuring instruments

Using cutting-edge ArcSAR synthetic aperture technology, the measurement head moves left and right every 15 seconds to scan the entire face. The measurement accuracy is extremely high, capable of measuring within 0.1mm. 【Features】 - 24-hour face monitoring available - Scans the face every 15 seconds (5,760 scans in 24 hours) - Measurement accuracy of 0.1mm - Detects minute displacements and behaviors before rockfalls with high precision - Scan data is processed in real-time and results are displayed on a tablet - Detects initial fluctuations and issues alarms - Data can be accessed remotely

• Other measuring instruments

This is a formwork removal strength management system that estimates the initial strength based on the amplitude of ultrasonic waves propagating through the cured concrete. It was registered in NETIS in 2020 (registration number: KK-200048-A). Continuous measurements can be taken from the time of concrete pouring, allowing for the estimation of initial strength at any given point and confirming the achievement of the specified strength, thus enabling formwork removal.

• Non-destructive testing

A special sealing material is applied to the surface of the measurement area, and a double chamber is pressed against it. The outer chamber is evacuated to create suction, and then air (in the case of an air permeability test) or distilled water (in the case of a water permeability test) is pressurized in the inner chamber, allowing it to permeate into the concrete. This non-destructive testing method can measure the surface permeability coefficient P value of concrete structures at the construction site, enabling non-destructive inspection of properties such as water tightness and durability, which are closely related to deterioration involving water.

• Other measuring instruments

IBIS-FS is a displacement meter that applies radar interferometry technology for monitoring structures such as bridges, buildings, historical monuments, and towers. It has overwhelming advantages compared to conventional measurement methods and can be used for both static and dynamic monitoring. Additionally, there is no need to install reflectors like prisms on the monitored objects, allowing for monitoring from distances of up to 1 km. Sampling can be conducted for structural vibrations at rates of up to 200 Hz. Furthermore, measurements can be taken regardless of day or night and weather conditions.

• Non-destructive testing

The radar interferometry technology allows for high-precision monitoring over a wide area. Monitoring volcanic activity and slope displacement is a necessary task to prevent natural disasters. The IBIS-FM can measure without a prism, enabling measurements without accessing the area directly. It evaluates the time-series displacement of each point with an accuracy of up to 0.1mm. With its large-scale data monitoring capabilities effective for slope failure and geological/ground analysis, the IBIS-FM continuously measures symmetrical surfaces from a sliding rail and immediately displays relative displacement on a control PC. It performs automatic monitoring 24 hours a day, regardless of day or night, making it ideal for high-precision large-scale data monitoring. The IBIS-FM allows for arbitrary setting of the measurement range.

• Non-destructive testing

The flaw detector "APRIS," which utilizes acoustic pulse reflection, can be applied to complex internal diameters regardless of the material. Measurements can be taken within 10 to 15 seconds per tube, and no coupling is required. It is particularly effective for U-bend pipes. It is easy to operate even for beginners, and data management and report creation can also be done using a PC.

• Non-destructive testing

The measurement principle is similar to thermal reflection, where light is irradiated onto the object, and the time it takes for heat to propagate is converted into coating thickness. Measurements can be made regardless of specific materials or substances, and it is possible to measure both powders and liquids.

• Non-destructive testing

The Flaw Detector 100 (abbreviated as FD100) offers a wide range of measurements. It includes all popular flaw detection techniques such as DGS, DAC, AVG, TGC, and AWS. With A, B, C, L&S scans and TOFD functionality, users can obtain more measurement data.

• Other measuring instruments

In 2003, we were the first to adopt infrared cameras in the market, measuring the surface body temperature of passengers passing through checkpoints at airports in regions affected by SARS, which helped in confirming their health status. Their effectiveness is expected in places with high foot traffic, such as airports, guard stations, and shopping malls.

• Non-destructive testing

It is a hardness testing machine for paper, film, rubber, and resin products. It can measure various products regardless of material, making it useful for quality control. For metal products, it can be converted to HS, HRC, HV, and HB. Additionally, the operation is very simple, allowing even inexperienced users to obtain accurate inspection results.

• Non-destructive testing

In the automotive industry, spot welding is a very important factor that has a significant impact on quality. UT/x uses a 15MHz PA matrix transducer incorporating 61 independent elements with a 1mm pitch, and calculates the nugget diameter, nugget area, and nugget thickness of spot welds according to its unique algorithm.

• Non-destructive testing

The proformer corrosion meter adopts the natural potential method, which is incorporated in many standards such as JSCE-E601-2000. By exposing some rebar and connecting cables to pass a weak electric current, it measures the natural potential of the rebar (steel) within the concrete. The measurement values are displayed on the main unit as a color map, and data can also be transferred to a computer.

• Non-destructive testing

<HARDNESS TESTING MACHINE> ■e-computest Capable of measuring the hardness of all metals without changing the indenter. Data sharing and management are possible with the included Android tablet. ■e-handy A patented hardness testing machine developed by Ernst (DIN50158 standard). Measures electrical resistance and converts it to hardness. ■e-dynatest No need to select conversion formulas based on material properties, making testing easy. No variation in values due to individual differences. ■Brinell Tester A portable Brinell hardness testing machine that is easy to use and has no individual differences. Capable of testing high precision from small shapes to large shapes. <Brinell Indentation Diameter Automatic Reading Device> ■e-Brio2 Reads the diameter of the indentation made by the Brinell hardness tester with a resolution of 0.001mm, and automatically displays the Brinell value.

• Non-destructive testing

【Features】 - Capable of waveform display on the display device (zooming and scrolling are also possible) - Gain and pulse voltage can be adjusted - Capable of measuring propagation time, propagation speed, concrete strength, elastic modulus, and more - Various measurement modes tailored to applications - Large capacity memory (8GB) - Data processing software - Compatible with various transducers - Transducer holder (optional)

• Non-destructive testing