ＡＳＡＨＩ List of Products and Services

Cleaning is an important process. Insufficient cleaning can leave protein residues, which may harbor many microorganisms, leading to incomplete disinfection and sterilization. Therefore, it is crucial to perform thorough cleaning of medical instruments promptly after use. Cleaning can achieve 99.99% physical decontamination, providing effects close to disinfection and reducing the risk of infection. At ASAHI, we develop and manufacture cleaning agents for pre-cleaning sprays, washer-disinfectors (WD), ultrasonic machines, and other cleaning agents.

• cleaning
• cleaning

On the surface of copper products, an oxide film is generated during various processing stages, depending on the environment. The product demonstrates its processing capabilities with only a short immersion, significantly enhancing the stability with the maximum advantages of water solubility, such as non-flammability, degreasing properties, and workability, without concerns about pollution or other issues.

• others

The combination of soft micro-particles and special surfactants removes adhered dirt without scratching metal surfaces. Regular cleaners can scratch metals like stainless steel. SunsCut B removes water stains and grease from stainless sinks, mirrors, and tiles without damaging the stainless surface. - It has a high concentration of ingredients, making it economical and easy to spread. - The ingredients do not fall under drainage regulations, so the rinse water can be discharged directly into the sewage system. - It does not fall under organic solvent regulations or labor safety and health laws, allowing for safe operation. - It can be used to remove buffing residue after buff polishing.

• Bathroom Supplies
• Other store equipment and supplies

Are you worried about not being able to find a cleaning agent like this? Is there no place that can create a cleaning agent like this for you? At ASAHI Corporation, we listen to our customers' wishes and, with fresh ideas, utilize our unique technological capabilities to develop and manufacture original cleaning agents (OEM). 【OEM Achievements】 ■ Kitchen detergents, laundry detergents, sanitary detergents, car shampoos, etc. 【Industries where our products are used】 ■ Automotive industry, scientific industry, nursing care industry, commercial dishware industry *For more details, please contact us directly.

• cleaning

<Special Features> 1. A gel with excellent thermal conductivity prevents the rise in skin surface temperature, allowing for efficient treatment while protecting the skin. 2. It is formulated to be safe for use even on sensitive skin. 3. It has received high praise for its hardness when scooping, smoothness when spreading, thickness after application, and overall high usability and safety. 4. It contains moisturizing and anti-inflammatory agents, which protect the skin. [For more details, please contact SAHI Corporation.]

• others

The "CU-600" is a copper oxidation film remover that can eliminate oxidation films and discoloration simply by immersing discolored copper. It easily removes discoloration and restores the original copper color, making it ideal for the restoration of cultural properties and historical buildings. ● A budget-friendly 4L size is also available! ● 【Customer Feedback】 ■ It is very useful because we can deliver products in their original copper color by removing oil stains and oxidation films from dirty copper. ■ We were able to safely remove burn marks caused by heat. ■ A discolored copper sign has been revived. * Please view the PDF data of the "Copper Oxidation Film Remover CU-600" catalog from the download section. ◎ The effectiveness of the copper discoloration prevention agent can be confirmed in the video below. ◎

• Restoration and repair system for cultural heritage buildings
• others

The "CU-600" is a copper oxidation film remover that can eliminate oxidation films and discoloration simply by immersing discolored copper. In response to customer requests, the highly popular product "CU-600" is now available in a smaller size! This makes it easier to store and allows for trial use. The smaller size is also ideal for sheet metal workers and metal processing companies that handle small products or one-of-a-kind items. [Customer Feedback] ■ It is very useful because it allows us to deliver copper that has been cleaned of oil stains and oxidation films, maintaining its original copper color after machining and bending processes. ■ We were able to safely remove burns caused by heat. ■ A discolored copper sign has been revived. *Please take advantage of the more convenient and easily purchasable 4L size. *The catalog for the "CU-600 4L size" can be viewed as a PDF data from the download section. ◎ The effectiveness of the copper discoloration prevention agent can be confirmed in the video below. ◎

• others

"I want to buy it, but 18L is too much." "I want a small amount considering storage." "I want to use it for testing, so a one-kan can is too much." We have received numerous requests like these. In response to these requests, we have added a 4L size for the copper discoloration preventives BT-5, BT-7, and BT-8. We have long received feedback on this product, such as: "It is very useful because it can remove oil stains and oxidation films from dirty copper that has gotten oil or glove marks after machining and bending, allowing us to deliver it in its original copper color." "Even though I removed the discoloration from the copper, it would quickly turn red again, but by using BT-5, it no longer discolors." Please take advantage of the newly convenient and easily purchasable 4L size.

• others

This is a silver discoloration preventive agent designed to protect the surfaces of electrical and electronic components, as well as jewelry and utensils made of silver and silver-plated materials, from various harmful atmospheres. The environments that affect silver and silver-plated surfaces are diverse, but particularly when exposed to atmospheres containing sulfur gas, sulfides are generated on the silver surface, resulting in a black discoloration of the silver surface, an increase in electrical resistance in electronic components, and a decrease in conductivity. The silver discoloration preventive agent AC10A forms a strong film on the silver surface, protecting it from sulfide and oxidation. Additionally, the protective film has good solderability and low electrical contact resistance. AC-10A is a water-based solvent type silver discoloration preventive agent. It is widely used in electrical and electronic components such as switch contacts that dislike water, connector contact parts, and printed circuit boards.

• others

This is a silver discoloration preventive agent designed to protect the surfaces of electrical and electronic components, as well as jewelry and utensils made of silver and silver-plated materials, from various harmful environments. The environments that affect silver and silver-plated surfaces are diverse, but particularly when exposed to atmospheres containing sulfur gas, sulfides are generated on the silver surface, causing it to appear blackened. In electronic components, this results in increased electrical resistance and decreased conductivity. The silver discoloration preventive agent AC-10B forms a stronger coating on the silver surface compared to AC-10A, protecting it from sulfur gases such as hydrogen sulfide and sulfur dioxide. Additionally, the protective film has good solderability and low electrical contact resistance. AC-10B has been developed for large electrical components. When applied to small components compared to AC-10A, it may result in a sticky surface. AC-10B is a water-based solvent type silver discoloration preventive agent.

• others

This is a water-soluble copper discoloration inhibitor that forms a complex of copper and organic substances on the copper surface, preventing oxidation and long-term discoloration. It has the characteristic of achieving coating treatment through immersion only. 【Specifications】 ■Appearance: Colorless transparent liquid ■Specific gravity: 0.95 ■pH: Neutral ■BT-5 forms a copper discoloration protective film. It is a standard product among the BT series. ■The surface treated with this agent does not experience a decrease in electrical resistance. ■It also has good adhesion with paints, reducing the rate of defects. ■The discoloration prevention film treated with BT-5 on the copper surface is very strong at low temperatures below 40-50°C, completely preventing discoloration. However, as the temperature rises, the discoloration prevention film is destroyed, and its ability to prevent discoloration decreases.

• others

The copper discoloration inhibitor "BT-7" forms a heat-resistant acidic compound on the surface of copper, preventing self-oxidation of copper due to high temperatures. It is a highly specific copper discoloration inhibitor that allows for easy formation of a coating through immersion treatment. 【Features】 ■ Organic substances form complexes with copper, protecting the copper surface from oxidation. ■ Since preventing copper discoloration often requires high-temperature resistance, we offer a high-temperature resistant discoloration inhibitor. ■ The pH of the discoloration inhibitor is neutral (except for BT-14). ■ The concentrate can be diluted from 20 times to 10 times for use, making it cost-effective. ■ Treatment at room temperature is also possible. For optimal performance in a short time, a treatment temperature of 50-60°C is recommended. 【Specifications】 ■ Appearance: Pale yellow transparent liquid ■ Specific gravity: 0.95 ■ pH: Neutral For more details, please contact us or download the catalog.

• Safety and consumables

This is a water-soluble copper discoloration inhibitor that forms a complex of copper and organic substances on the copper surface, preventing oxidation and long-term discoloration. It has the characteristic of achieving coating treatment through immersion alone. ■ BT-8 forms a heat-resistant copper discoloration protective film (oxidation prevention film). ■ The heat resistance time varies with temperature (e.g., 180°C for 20 minutes). ■ The surface treated with this agent does not experience a decrease in electrical resistance. ■ BT-8 has high hydrophilicity and good adhesion with water-based paints, reducing the rate of defects. 【Specifications】 ■ Appearance: Colorless to pale yellow transparent liquid ■ Specific gravity: 1.0 ■ pH: Neutral

• others

We previously commercialized BT-8 as a heat-resistant discoloration preventive agent, but in response to the demands of our customers, we have developed BT-14, which has further improved heat resistance and the following features. The heat resistance is enhanced compared to BT-8, and it can be used at an acidic pH of 2 to 3. 【Features】 ■ Organic substances form complexes with copper, protecting the copper surface from oxidation. ■ Since preventing discoloration of copper often requires high-temperature heat resistance, we offer a heat-resistant discoloration preventive agent suitable for high temperatures. ■ The concentrate can be diluted from 20 times to 10 times for use, making it cost-effective. ■ Treatment at room temperature is also possible. For optimal performance in a short time, we recommend a treatment temperature of 50 to 60°C.

• Safety and consumables

The "CU-600" from ASAHI Corporation is a copper oxide removal agent that can remove oxidation films and discoloration simply by immersing discolored copper. It only removes oxides from copper, copper alloys, and other metals, without damaging the metal substrate. 【Features】 ◆ Easily removes discoloration just by immersion ◆ Removes only oxidation films and discoloration without damaging the metal substrate ◆ A safe, neutral formulation ◆ Can be diluted for use, making it cost-effective 【Usage Instructions】 ■ Copper and brass materials → Degreasing → Rinsing → CU-600 → Rinsing → Plating, painting, or various surface treatments (Improves adhesion in low current areas.) ■ Copper and brass materials → CU-600 → Rinsing → Copper discoloration prevention agent BT series → Rinsing → Drying (The surface becomes clean with CU-600 treatment, preventing uneven discoloration.) ■ Nickel plating → CU-600 → Rinsing → Various plating (The white oxide film after nickel plating can be removed by treating with CU-600.) 【For more details, please download the catalog or feel free to contact us.】

• others

This is a silver discoloration preventive agent (sulfur-based rust inhibitor) designed to protect the surfaces of electrical and electronic components, as well as jewelry and utensils that are processed with silver and silver plating, from various harmful environments. The environments affecting silver and silver-plated surfaces are diverse, but particularly when exposed to atmospheres containing sulfur gas, sulfides are generated on the silver surface, resulting in a black discoloration of the silver surface, an increase in electrical resistance in electronic components, and a decrease in conductivity. The silver discoloration preventive agent AC20 forms a strong film on the silver surface, protecting it from sulfide and oxidation. Additionally, the protective film has good solderability and low electrical contact resistance. Being water-based and neutral, it is also easy to treat wastewater. AC-20 provides the highest discoloration prevention effect against sulfur gas among the AC series.

• others

AC-70 is designed to maintain resistance to sulfur gas like AC-20 and to form a thin, uniform protective film. Due to the thin and uniform protective film, there is no unevenness in thickness even when applied to glossy silver or semi-gloss silver plating. It is a silver discoloration preventive agent used to protect the surfaces of electrical and electronic components, as well as jewelry and artifacts, from various harmful atmospheres. The environments affecting silver and silver-plated surfaces are diverse, but particularly when exposed to atmospheres containing sulfur gas, sulfides are generated on the silver surface, causing the appearance of the silver surface to turn black, increasing electrical resistance in electronic components, and reducing conductivity. The silver discoloration preventive agent AC-70 forms a strong film on the silver surface, protecting it from sulfurization and oxidation. Additionally, the protective film has good solderability and low electrical contact resistance. Being a neutral water-based solution, it is also easy to treat wastewater. Like AC-20, AC-70 provides a high discoloration prevention effect against sulfur gas within the AC series.

• others

AC-410 is a silver tarnish inhibitor designed to have stronger resistance in discoloration tests in potassium sulfide solution. Among the AC series, AC-410 provides the highest tarnish prevention effect in potassium sulfide solution. It is a silver tarnish inhibitor used to protect the surfaces of electrical and electronic components, as well as jewelry and artifacts, from various harmful environments. The environments affecting silver and silver-plated surfaces are diverse, but particularly in atmospheres containing sulfur gases or in liquids containing sulfides, sulfides form on the silver surface, causing it to appear black, increasing electrical resistance in electronic components, and reducing conductivity. The silver tarnish inhibitor AC-410 forms a strong film on the silver surface, protecting it from sulfide and oxidation. Additionally, the protective film has good solderability and low electrical contact resistance. Being water-based and neutral, it is also easy to treat in wastewater disposal.

• others

The silver surface treatment agent AGR-100 can remove the discoloration film from silver products that have changed color over long-term use, allowing for the reproduction of a new metallic luster on the silver surface. 【Features】 〇 Under normal use, the silver plating does not dissolve significantly or become rough. 〇 It serves as an alternative to inorganic acids. ● For more details, please download the catalog or contact us.

• Safety and consumables
• others

Sunlube P-557 is a rust preventive agent with lubricating properties. By applying it to steel wire materials, it provides lubrication to the surface of the wire. This prevents scratches by allowing the wires to slide against each other.

• others

If there are voices saying, 'I want a cleaning agent like this, is there a place that can make such a cleaning agent?', our company will respond to those voices. While listening to our customers' wishes, we will always maintain fresh ideas, utilize our unique technological capabilities, and engage in the development and contract manufacturing (OEM) of original cleaning agents. Please feel free to consult us about your needs for kitchen detergents, laundry detergents, sanitary cleaning agents, car shampoos, and more.

• others

Water-soluble rust inhibitor AS-30 is a newly developed rust inhibitor for iron and aluminum, used as a pre-treatment before painting and as a primary rust inhibitor before plating. Due to its water-soluble nature, it is a product advantageous in terms of non-flammability, workability, cost-effectiveness, and environmental impact. 【Specifications】 ○ Main component: Alkanol fatty acid amine salt ○ Appearance: Colorless transparent liquid ○ pH: 8.3 (1% solution) For more details, please contact us or download the catalog.

• Anti-rot, anti-termite, anti-mold material

The main feature of KC-80 is that the metal surface treated with KC-80 can be painted directly after drying the moisture, without any impact on the adhesion of the paint film. The metal surface treated with KC-80 is water-resistant and has a temporary rust prevention and discoloration effect for a short period. 【Features】 ○ A water-repellent agent based on a special surfactant ○ Forms an extremely thin film on the metal surface at a monomolecular level, repelling moisture ○ High concentration types are also available ○ Treating with KC-80 after electroless nickel plating improves compatibility and enhances rust prevention ○ It does not affect the hardening process after electroless nickel plating. For more details, please contact us or download the catalog.

• Anti-rot, anti-termite, anti-mold material

The water-soluble gold discoloration preventive agent AU-20 is a water-soluble discoloration preventive agent developed to protect various gold-plated electronic components from corrosive gases. As electronic components become smaller and more densely integrated, there is an increasing demand for enhanced reliability in performance. In particular, gold plating is applied to contact areas where reliability is critical. Gold is chemically stable, has low electrical resistance, and exhibits excellent corrosion resistance even in corrosive environments; however, to consider economic factors, the gold plating is currently kept thin. As a result, pinholes can easily form, allowing corrosive gases to penetrate, leading to corrosion and a decline in performance. **Features** - Excellent corrosion resistance with minimal increase in contact resistance → Passes environmental tests such as heat resistance, salt spray resistance, resistance to sulfur dioxide gas, and resistance to hydrogen sulfide gas, with a small increase in contact resistance after testing. → In particular, AU-20 reacts not only with copper alloys but also with nickel surfaces, providing protection from corrosive environments. - Does not affect solderability. - Has appropriate lubricity. For more details, please download the catalog or contact us.

• Safety and consumables
• others

"I want to buy it, but 18L is too much." "I would like a smaller quantity considering storage." "I want to use it for testing, so a one-gallon can is too much." We have received numerous requests like these. In response to these requests, we have added a 4L size of the copper discoloration remover CU-600. This product has long been valued for its ability to remove oil stains and oxidation films from dirty copper, which has been marked by oil or glove prints after machining and bending, allowing us to deliver it to customers in its original copper color. "We were able to safely remove the burn caused by heat." "The discolored copper sign has been revived." We have received many positive comments like these. Please take advantage of the newly convenient and easy-to-purchase 4L size. Asahi Corporation's "CU-600" is a copper oxidation film remover that can remove oxidation films and discoloration simply by immersing discolored copper. It only removes oxides of copper, copper alloys, and other metals, without damaging the metal substrate.

• others