日新化学研究所 List of Products and Services

Our company is a chemical assistant that solves problems in production sites. We handle over 1,000 types of products, including defoamers, coagulants, algaecides, and deodorants. In the sedimentation tanks of paper mills, issues such as poor appearance due to foaming in the wastewater process and environmental impacts from SS outflow were problematic. By using a defoamer, we significantly improved the outflow of foam and SS. Additionally, the amount of defoamer used at the discharge outlet was reduced, leading to cost savings. We have various other achievements as well. Please feel free to consult us. 【Case Studies】 ■ [Defoamer] Foam countermeasure case ■ [Polymer Coagulant] Selection case ■ [Algaecide] Cleaning case for algae and slime ■ [Deodorant] Selection case 【Products We Handle】 ■ Defoamer ■ Coagulant ■ Algaecide ■ Deodorant ■ Deodorant ■ Pipe cleaning agent ■ Other chemicals *For more details, please refer to the PDF materials or feel free to contact us.

• Medicines

The "Silicone Cleaner AQ" series is a water-based cleaning agent specifically designed for silicone oil, primarily composed of surfactants, glycol compounds, and alkaline agents. - "AQ-10" is suitable for cleaning in the low to medium temperature range of 25 to 40°C. - "AQ-20" is suitable for cleaning in the high temperature range of 60 to 80°C. - Due to its high safety as a water-based product, it can be applied to a wide range of uses and locations. It can clean amino-modified silicone oil, dimethyl silicone oil, and waterproof foundation, among others. 【Features】 ■ Main components: Surfactants, glycol compounds, alkaline agents ■ pH (1%): 11.0 to 13.0 ■ Not classified as hazardous under organic regulations, toxic substances, PRTR law, or fire law hazardous materials. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

Our company is a chemical assistant that solves problems in production sites. We handle over 1,000 types of products, including defoamers, coagulants, algaecides, and deodorants. In the sedimentation tank of a paper mill, issues such as appearance defects due to foaming in the wastewater process and environmental impacts from SS runoff were problematic. By using a defoamer, we significantly improved the outflow of foam and SS. Additionally, the amount of defoamer used at the discharge point was reduced, leading to cost savings. We have various other achievements as well. Please feel free to consult us. [Case Studies] ■ [Defoamer] Foam Countermeasure Case ■ [Polymer Coagulant] Selection Case ■ [Algaecide] Cleaning Case for Algae and Slime ■ [Deodorant] Selection Case *For more details, please refer to the PDF materials or feel free to contact us.

• Medicines

"Chemilabo Disinfecting Cleaning Agent Splash Guard" is a synthetic cleaner for homes and furniture that allows for disinfecting and cleaning by wiping surfaces such as furniture and fixtures. It prevents dust and dirt from being attracted and adhered due to static electricity. It also prevents bacteria and viruses attached to airborne bacteria and dust from being attracted and adhered by static electricity. It prevents decay caused by bacterial growth and the decomposition of organic matter, thereby preemptively suppressing the occurrence of unpleasant odors and exhibiting deodorizing effects. 【Features】 ■ Capable of disinfecting and cleaning ■ Antibacterial components remain on the wiped surface ■ No need to wipe multiple times ■ Antistatic components remain on the wiped surface, preventing the accumulation of static electricity ■ Prevents dust and dirt from being attracted and adhered due to static electricity *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies
• Other store equipment and supplies
• Equipment leasing and rental

- The solid defoaming agents "Bisform BV" and "Bisform BVF" solve problems caused by foam when installed in areas such as drains. - When foam or similar substances adhere, the active ingredients gradually dissolve, demonstrating defoaming effects. ● Silicone type "Bisform BV" ● Industry's first! Non-silicone type "Bisform BVF" - "Bisform BV" and "Bisform BVF" are versatile defoaming agents with defoaming and anti-foaming properties for all water-based foaming liquids. They are primarily recommended for use in the following industries and processes: ○ Metal processing industry (cutting oils, lubricants, plating, etc.) ○ Petrochemical industry (during refining and distillation) ○ Slate and cement industry ○ Textile industry (starching, scouring, dyeing, bleaching, etc.) ○ Paper and pulp industry (pulp, coating liquids, etc.) ○ Fertilizer industry ○ Paint industry (water-based paints, etc.) ○ Resin, latex, and synthetic rubber industry They are also suitable for foaming in general industrial wastewater, including that from the chemical industry and urban sewage.

• others

We would like to introduce our products, "Coking Star" and "Capron." "Coking Star" is an antibacterial and deodorizing agent that can be used in paper, fiber, and resin products. We select suitable agents based on antibacterial tests corresponding to standard bacteria according to your needs. Additionally, "Capron" is an antistatic agent that adds functional value to products beyond just static electricity prevention. It helps prevent static electricity-related issues and improves productivity. 【Features of Coking Star】 ■ Usable in paper, fiber, and resin products ■ Suitable agents are selected based on antibacterial tests corresponding to standard bacteria according to your needs ■ Antibacterial evaluation of processed products is also possible ■ Implementation can be carried out according to your requirements upon adoption *For more details, please refer to the PDF materials or feel free to contact us.

• others

"Delastar" is a chemical agent that removes rust and discoloration caused by oxidation films on metal surfaces, restoring the original metal surface. Since the effective rust removers vary depending on the type of metal and the usage environment, evaluation tests on a lab scale are conducted to select the most suitable rust remover. In addition to managing production processes and preventing rust on metal products, please try the anti-rust agent "Nissin Guard" series. 【Features】 ■ Removes rust and oxidation films ■ Restores metallic luster ■ Conducts evaluation tests on a lab scale to select the most suitable rust remover ■ Can be used undiluted or diluted 2 to 5 times with water for application, spraying, or immersion ■ The foam type "TG 35" is used by spraying it undiluted *For more details, please refer to the PDF document or feel free to contact us.

• Rust Inhibitor

"High Clean AC" is a specialized agent that powerfully sterilizes, detaches, and cleans microbial contamination (slime) that has accumulated in the piping of cooling water circulation systems. By significantly reducing the seed bacteria of slime, it helps prevent the emergence of resistant bacteria and is expected to prolong the lifespan of cooling water and piping. While conventional products were mainly two-component types, this product only requires a single component, allowing for a significant reduction in work time and labor, and enabling simultaneous sterilization, mold reduction, slime detachment, cleaning, and neutralization. [Features] - Prolongs the lifespan of cooling water and piping - Significantly reduces seed bacteria and prevents the emergence of resistant bacteria - Shortens work time and reduces labor due to single-component application - Prevents pump clogging, dirt adhesion, and cooling failures in advance *For more details, please refer to the PDF document or feel free to contact us.

• Bathroom, shower, washbasin and toilet equipment
• Piping Equipment

The "Bochuster CP Series" is an insect repellent that contains the natural insect-repelling ingredient "copaiba oil." It is compatible with oil formulations, emulsion formulations, water-based formulations, and masterbatches. The toxicity of the repellent ingredient "copaiba oil" used in this product is significantly lower compared to commonly used insecticidal ingredients. "Copaiba oil" has been used for various purposes for a long time and is registered as a food additive with the US FDA. In recent years, its repellent effect has been confirmed through research with Kinki University. 【Features】 ■ Low volatility, low odor ■ Contains natural essential oil, copaiba oil, extracted from leguminous plants native to the Amazon ■ Food additive, FDA registered *For more details, please refer to the PDF materials or feel free to contact us.

• Anti-rot, anti-termite, anti-mold material
• Pest and insect control products

The "Beam Star Series" is a deodorant that is effective against unpleasant odors in industrial and miscellaneous applications. Among them, the Beam Star W Series exhibits various deodorizing effects such as neutralization reactions, redox reactions, and antibacterial deodorization, with the concept of eliminating the unpleasant odor substances themselves. By directly mixing with the source of the odor or by spraying or dispersing it, even higher effectiveness and immediacy can be achieved. 【Product Lineup】 ■ Beam Star W Series: A powerful industrial deodorant with strong deodorizing effects ■ Beam Star P Series: A highly safe general-purpose deodorant ■ Beam Star S Series: A processing deodorant that imparts deodorizing properties through spraying or application *For more details, please refer to the PDF materials or feel free to contact us.

• Air conditioning equipment

We are offering a free gift of the "Troubleshooting Handbook for Choosing Cleaning Agents"! Nisshin Chemical Research Institute is a chemical assistant that handles pipe cleaning agents, defoamers, water-based release agents, preservatives, antistatic agents, and more! 【Contents】 ◆Troubleshooting Examples ◎Scale in strainers and cooling pipes ◎Contamination in lubrication tanks and pipes of copper wire manufacturers ◎Slime on the walls of water storage tanks ◎Oil contamination in the papermaking process ◎Silicone contamination ------------------------------------------------------------ Currently, we are providing know-how materials for free. If you are interested, please request through the inquiry form. ------------------------------------------------------------ 　　　　　　　　↓　↓　↓　　　　　　　　　　　↓　↓　↓

• others

Since it is a water-based emulsion type, it can be diluted with water in any desired ratio, and it has good workability. Please use it as a release agent during the removal of the mold and after curing. In any application, it enables quick demolding and is a release agent that does not affect post-processing. It does not contain VOCs, and it is characterized by having little odor in the working environment and after curing.

• others

AE agents and water-reducing agents used in cement and concrete manufacturing are essential additives for enhancing cement strength and performance. However, if the amount of additives is too high, it can lead to a decrease in strength due to an excessive amount of air bubbles, resulting in a decline in quality. By adding the defoamer "Bisform Series" for cement and concrete, it is possible to control the amount of air bubbles and produce high-quality cement and concrete.

• others

It cleans or suppresses stubborn water scale deposits of calcium, magnesium, and other substances that have firmly adhered to the piping and equipment of water supply and cooling water circulation systems. We can recommend suitable cleaning agents based on the material of the piping and equipment as well as the type of dirt. Additionally, it can be customized according to the intended use.

• others

The pipe cleaning agents "Control" and "High Clean" are cleaning agents that remove and suppress dirt and microbial contamination within machinery and piping. Customization of the cleaning agents to best suit the customer's applications and usage environments is also possible. 【Features】 We identify the material of the equipment used and the type of dirt, and introduce the most suitable cleaning agents for the following types of dirt: 1. Scale (inorganic compounds such as calcium and magnesium) 2. Slime (microbial contamination) 3. Pitch (organic contamination such as oils and fats) *Customers who wish to receive samples, please fill out the inquiry form below, stating "Request for Sample." 【We have several types available, so we will select the appropriate cleaning agent by phone】 *If you download the catalog, our representative will contact you directly.

• others

【About the cleaning agents "Control" and "High Clean"】 The dirt that adheres to machinery and piping can include the following: 1. Scale (inorganic compounds such as calcium and magnesium) 2. Slime (microbial contamination) 3. Pitch (organic contaminants such as oils and fats) We provide cleaning agents that effectively remove the above contaminants. We will introduce the appropriate cleaning agents based on the material of the equipment used and the type of dirt. Customization of cleaning agents according to your specific application is also possible. 【We have several types available, so please call us to select the appropriate cleaning agent】 【About free lab evaluation】 *Customers who wish to have a lab evaluation should contact us with "Lab evaluation request" noted. *For more details, please download the catalog or contact us directly.

• others

One of the important points of production management in the chemical industry is foam control. Foaming troubles during the production process can lead to a decline in product quality and a decrease in production efficiency. Additionally, in wastewater treatment, it is necessary to avoid discharging foaming liquids directly for environmental management reasons. As a simple method for foam control, we recommend keeping a defoaming agent on hand that can be used in conjunction with equipment measures and is applicable to a wide range of foaming systems. Based on our achievements in the textile industry and the paper pulp industry, we believe that the use of defoaming agents is effective across a wide range of industries.

• others

[Limited to 24 people] We are offering free samples of cleaning agents that remove and suppress dirt and microbial contamination in machinery and piping. [About the cleaning agents "Control" and "High Clean"] The types of dirt that can adhere to machinery and piping include the following: 1. Scale (inorganic compounds such as calcium and magnesium) 2. Slime (microbial contamination) 3. Pitch (organic contamination such as oils and fats) We have prepared cleaning agents that effectively remove the above contaminants. We will introduce the appropriate cleaning agent based on the material of the equipment and the type of dirt. Customization of cleaning agents according to your application is also possible. Currently, we are offering free samples limited to 24 people. *If you would like a free sample, please check "Request Sample" in your inquiry. [Since there are several types available, we will help you select the appropriate cleaning agent over the phone.] *For more details, please download the catalog or contact us directly.

• others

We will clean and suppress microbial contamination (slime) that occurs in water pipes, cooling water circulation systems, and other piping and equipment. First, we will conduct a laboratory evaluation of the water used, and based on the type of contamination (such as bacterial count) and the material of the piping, we will recommend an appropriate slime cleaning agent. Please feel free to contact us.

• others

It provides anti-static effects to various materials and prevents static electricity damage. This is a surface coating anti-static liquid that can be used on various plastic parts, films, paper and textile products, silicone components, and more. Additionally, we can customize it according to the application and usage conditions, and suggest the most suitable anti-static liquid. Please feel free to contact us for inquiries and consultations.

• others

The antistatic agent "Capron Series" is a chemical that prevents the accumulation of static electricity by imparting a slight conductivity to insulators. By introducing ion-conductive materials, it becomes less susceptible to the effects of humidity. Additionally, there are grades that not only provide antistatic properties but also offer slip resistance to prevent scratches, as well as grades that can impart water repellency. All grades are completely water-based, making them environmentally friendly and safe to use. ◎ The catalog includes helpful case studies that address issues faced in production environments. 【Features】 ■ Prevents static electricity in plastic, film, and silicone products ■ Less susceptible to humidity due to the introduction of ion-conductive materials ■ Depending on the grade, it provides not only antistatic properties but also scratch prevention and water repellency ■ Individually developed for various applications such as plastics, resins, fibers, and printing processes *Download the catalog here ↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓

• others

In the manufacturing of building material boards, resins, PVA, and paper strength agents are used as dispersants, which contribute to foaming. Additionally, the incorporation of inorganic materials stabilizes the foam, not only hindering the sheet formation process but also negatively affecting product quality due to reduced water filtration caused by the foam. The defoamer series "Visform" for building material board production can improve water filtration and enhance productivity with a small amount of use.

• others

"Kokinstar" is an antibacterial deodorant that can be used in paper, fiber, and resin products. Based on your requests, we select the appropriate agents through antibacterial testing that corresponds to standard bacteria. Nisshin Chemical Research Institute has many years of experience and achievements as a manufacturer of antibacterial deodorants for the paper pulp, non-woven fabric, and textile industries. We can also conduct antibacterial evaluations of processed products. We will carry this out according to your requests when adopted. 【Features】 ■ Provides antibacterial and deodorizing properties to fibers, paper products, and films ■ Selects appropriate agents through antibacterial testing that corresponds to standard bacteria based on your requests ■ Can conduct antibacterial evaluations of processed products *For more details, please refer to the PDF materials or feel free to contact us.

• Safety and consumables

There were many paper breaks during the press open draw, leading to low productivity, and even adding more chemicals to the roll doctor shower did not change the situation. Therefore, instead of using other companies' chemicals, we added 'High Touch SPH-3' at a rate of 2cc/min per 1m of sheet width. The chemical cost was reduced by 40% compared to before, and the press draw improved by 0.2 points. 【Case Summary】 ■Issues - There were many paper breaks during the press open draw, causing productivity issues. - Adding more chemicals to the roll doctor shower did not result in any changes. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

"Starch solution is decaying in the storage tank, causing an unpleasant odor." "There are concerns such as the number of bacteria exceeding 1,000 cfu/ml several times a year (especially in summer)." The starch solution is prone to decay due to its neutral pH, requiring a quick-acting solution compared to conventional preservatives. Therefore, 'Statect 231' was added in a high frequency of 36 times per day. As a result, we achieved an improvement that maintained the bacterial count below 100 cfu/ml throughout the year. [Case Summary] ■ Concerns - Starch solution is decaying in the storage tank, causing an unpleasant odor. - The number of bacteria exceeds 1,000 cfu/ml several times a year (especially in summer). *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

There were concerns such as 'the coagulant is not easily forming flocs in the wastewater treatment process (sedimentation tank)' and 'due to incomplete floc formation and bubbles, SS floating occurs frequently, leading to discharges into the river.' As a solution, the addition of 'Bismar FS-12' confirmed the effect of suppressing SS floating. Being an emulsion type, it has a low COD load. As a result, the discharge of SS was significantly improved, and the amount of defoamer used at the discharge outlet was reduced by 15%. [Case Summary] ■ Concerns - The coagulant is not easily forming flocs in the wastewater treatment process (sedimentation tank). - Due to incomplete floc formation and bubbles, SS floating occurs frequently, leading to discharges into the river. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

Foaming in drainage not only involves the outflow of SS components but also negatively impacts the environment and aesthetics, leading to concerns about visual appeal. Therefore, we provided a selection based on our extensive lineup and track record, implementing customized responses according to the foaming conditions. As a result, we significantly improved the outflow of SS components and achieved reductions in the use of defoamers and costs. 【Case Summary】 ■Concern - Foaming in drainage not only involves the outflow of SS components but also damages the landscape, negatively affecting environmental and aesthetic impressions. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

"Streaks occurred due to foaming in the coating solution, resulting in a decline in paper quality." "Oil spots appeared due to excessive addition of defoamers for foaming countermeasures." These were some of the concerns. Therefore, we conducted the selection of appropriate defoamers through a combination of defoaming tests and repellent tests. As a result, improvements were achieved, including a reduction in oil spots, elimination of streaks, improvement of repellency, enhancement of paper quality, and cost reduction. 【Case Summary】 ■Concerns - Streaks occurred due to foaming in the coating solution, resulting in a decline in paper quality. - Oil spots appeared due to excessive addition of defoamers for foaming countermeasures. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

As summer arrived, the water temperature in the DIP manufacturing process increased, exceeding the effective temperature range for general deinking agents, resulting in a decrease in whiteness and ink removal rate. To address this, we added the high-boiling point 'DIA-Z-300' to the pulper. This resulted in a 1 point increase in whiteness and a reduction in residual ink, allowing us to enhance whiteness without compromising productivity. 【Case Summary】 ■Issue - With the arrival of summer and the increase in water temperature in the DIP manufacturing process, the general deinking agents became ineffective, leading to a decrease in whiteness and ink removal rate. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

"There is a lot of foaming in the white water silo, and even with the addition of defoaming agents, it only disappears to a certain extent." "We are always adding a larger amount of defoaming agents to prevent foam from overflowing from the silo." We had these concerns. Therefore, we compared the effectiveness using lab evaluations with white water and proposed defoaming agents of different types. In field evaluations, the amount added was one-third (compared to the current amount) and the effectiveness was good, resulting in a total cost reduction of 40% with a price increase of 1.8 times (compared to the current price). [Case Summary] ■ Concerns - There is a lot of foaming in the white water silo, and even with the addition of defoaming agents, it only disappears to a certain extent. - We are always adding a larger amount of defoaming agents to prevent foam from overflowing from the silo. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

Wires are more prone to dirt compared to felt, and it is difficult to remove the adhered dirt. Additionally, they deteriorate due to wear and need to be replaced. Therefore, we used the wire cleaning agent 'W-EX' on the wire ear part for cleaning. By introducing a hydrophilic group to form a protective film of polyester, we were able to reduce wire wear and extend its lifespan. Furthermore, by forming a hydrophilic film, it became less likely for dirt to adhere. [Case Summary] ■Issues - Wires are more prone to dirt compared to felt, and it is difficult to remove the adhered dirt. - They deteriorate due to wear and need to be replaced. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

A large amount of foreign matter, believed to be calcium carbonate, was adhering to the felt suction box, causing problems. Therefore, continuous cleaning was performed using 'Neutron APL-78', which exhibits excellent cleaning properties and chelating effects against inorganic stains. As a result, the growth of scale adhering to the suction box was slowed down, and the analysis of the felt confirmed a significant reduction in dirt. [Case Summary] ■Concern - A large amount of foreign matter, believed to be calcium carbonate, was adhering to the felt suction box, causing issues. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

Due to the deterioration of old paper quality, there has been an increase in pitch defects, leading to an increase in damaged paper and quality complaints. We are counting the amount of pitch by transferring white pigment to the adhesive parts. By using "High Touch MP," we were able to suppress the aggregation and enlargement of pitch, thereby improving pitch-related issues. 【Case Summary】 ■Concern - Due to the deterioration of old paper quality, there has been an increase in pitch defects, leading to an increase in damaged paper and quality complaints. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

Due to starch, the vibrating screen was clogged, causing difficulties, and we were washing it with hot water, but it required a lot of effort to remove the dirt. Therefore, we cleaned the dirt that had adhered to the vibrating screen with the enzyme-based starch cleaning agent 'Control EZ-2'. It penetrated strongly into the starch dirt attached to the vibrating screen and was able to break down and remove the deposits. [Case Summary] ■Issues - The vibrating screen was clogged due to starch, causing difficulties. - We were washing it with hot water, but it required a lot of effort to remove the dirt. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The filter inside the extractor became clogged with slime, requiring several cleanings between SDs. Therefore, we continuously added 25 ppm of "High Clean AC" relative to the water volume held. The drainage performance of the disc filter and extractor dramatically improved, resulting in cost reduction through increased productivity. 【Case Summary】 ■Concern - The filter inside the extractor became clogged with slime, requiring several cleanings between SDs. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

We had concerns such as 'There is a lot of dirt on the super calendar, and productivity is poor' and 'With conventional release agents, there is particularly a lot of dirt during gravure coating.' Therefore, we switched from the conventional product to 'DEF-795TF.' This led to a reduction in super calendar dirt and a decrease in streaks during coating, contributing to improved productivity. [Case Summary] ■ Concerns - There is a lot of dirt on the super calendar, and productivity is poor. - With conventional release agents, there is particularly a lot of dirt during gravure coating. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

You were struggling with low productivity due to inefficient floss discharge caused by insufficient foaming of the FT with the deinking agent currently in use. By adding 200 ppm of 'DIA-Z-313' before the FT, the foam height of the FT was increased. As a result, the amount of floss removed increased, whiteness improved, and residual ink decreased. [Case Summary] ■Concern - The deinking agent currently in use alone does not provide sufficient foaming for efficient floss discharge, leading to poor productivity. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The silicone resin used in sealants and packing was sticking to the jigs and was difficult to remove, and in the worst case, we had to replace the entire component. So, we immersed an appropriate amount of silicone resin in 'Silicone Cleaner X-50'. After 30 minutes, it was half-dissolved, making it easy to remove with just a wipe. As a result, we significantly reduced cleaning time, eliminated the need for component replacement, and achieved substantial cost savings in labor and maintenance expenses. [Case Summary] ■ Issues - The silicone resin used in sealants and packing was sticking to the jigs and was difficult to remove. - In the worst case, we had to replace the entire component. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

In the paper mill, a large amount of machine oil was adhering to the conveyor belts used for transporting paper, causing quality issues. Therefore, we used the process cleaning agent "Neutron IAS." We successfully removed over 90% of the oil stains that were causing defects. As a result, quality issues were reduced to one-fifth of the previous level, eliminating the associated risks in the work environment. [Case Summary] ■Concern - Oil stains were adhering to the paper conveyor belts in the paper manufacturing process, transferring to the paper products, which required workers to regularly clean by hand, creating a poor and hazardous working environment. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

A slime-like adhesive substance developed on the wall, and it was further stained green by algae, causing a problem. In response, we added 500 ppm of "High Clean AC" weekly, relative to the water volume. It was over 20 times more effective compared to caustic soda, and the pH in the water decreased to around 9, improving safety during handling. 【Case Summary】 ■Problem - Slime-like adhesive substance developed on the wall - Stained green by algae *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

When performing metal processing with water-soluble lubricants, waste primarily composed of metal soaps is generated, leading to the accumulation of dirt in machines and pipes. This dirt causes a decline in product quality, as well as a reduction in the lifespan of processing tools and lubricants. By adding "Control QA-2" to the lubricant tank and circulating it for 24 hours, the accumulated waste in the pipes and tank can be removed. The cleaning solution only needs to be disposed of as waste, eliminating the need for complicated procedures. As a result, the dirt removal rate in the pipes significantly increased compared to using water or caustic cleaning methods. 【Case Summary】 ■ Issues - Waste primarily composed of metal soaps is generated when performing metal processing with water-soluble lubricants, leading to the accumulation of dirt in machines and pipes. - This dirt causes a decline in product quality and reduces the lifespan of processing tools and lubricants. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The strainer was quickly becoming clogged, which was a problem. So, we soaked the dirt that had adhered to the strainer in "Control TB" for cleaning, and as a result, the clogging of the strainer was resolved. It has a powerful removal effect compared to organic acids. Furthermore, we have successfully achieved a significant reduction in cleaning time and effort compared to conventional methods. 【Case Summary】 ■Concern - The strainer was quickly becoming clogged, which was a problem. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

There were concerns such as 'scale buildup, which narrows the cooling pipes and reduces cooling efficiency' and 'regular cleaning is necessary and cumbersome.' Therefore, we removed the calcium carbonate that had adhered inside the pipes using 'Control MF-2.' After that, by using the scale inhibitor 'Control PSV,' we suppressed the occurrence of scale. As a result, we were able to remove the scale without removing the pipes, and the frequency of cleaning significantly decreased due to the use of the scale inhibitor. [Case Overview] ■ Concerns - Scale buildup, which narrows the cooling pipes and reduces cooling efficiency - Regular cleaning is necessary and cumbersome *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

"Silicone Cleaner" is a silicone solvent that dissolves stubborn silicone stains that are difficult to remove once they form, allowing them to be washed away with water. 【Features】 ◆ Dissolves silicone resin and makes it possible to wash away with water ◆ Can be used in its concentrated form ◆ Extremely low volatility, allowing for multiple reuses *Our silicone cleaner series is available for purchase on our website. If you wish to buy, please click the link. ↓　↓　↓　　　　 https://nissin-kk.shop-pro.jp/　　 【For more details, please download the catalog or feel free to contact us】 ↓　↓　↓　　　　　　　　　　　　↓　↓　↓

• Wood panel and frame wall construction
• Renovation and repair methods
• Special Construction Method

We would like to introduce our dust control cleaning agent, "Sky Pole." It is primarily composed of surfactants and cleans dirt attached to dust control products such as mops, entrance mats, and roll towels. There are two types available: the powder type "Sky Pole AM" and the liquid type "Sky Pole T," which can be used according to the type of dirt and the type of fiber. 【Sky Pole AM Features】 ■ Contains alkaline agents and chelating agents ■ Strong against oil stains ■ Ionic: Non-ionic / Anionic ■ Appearance: White granules ■ Packaging: 20kg cardboard box *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables