ミツバ環境ソリューション List of Products and Services

There are no legal requirements regarding the qualifications of individuals conducting fit tests. However, it is recommended that those conducting the tests have sufficient knowledge and experience to ensure the accuracy of the fit factor. In our company, a representative who has completed the training for mask fit test administrators will visit the workplace to instruct on the correct way to wear the mask before conducting the test. For the fees for the fit test, please refer to our catalog or contact us directly.

• Environmental Survey

Mitsuba Environmental Solutions Co., Ltd. is a specialized company in environmental measurement, investigation and analysis, and ISO consulting. This document introduces the fees for "water quality testing (such as wastewater and river water)." We have listed items that may pose a risk to human health, items that may cause damage related to living environments, and other testing items, so please take a moment to read through it. [Contents] ■ Substances that may pose a risk to human health ■ Items that may cause damage related to living environments ■ Other testing items *For more details, please refer to the PDF document or feel free to contact us.

• others

Mitsuba Environmental Solutions Co., Ltd. is a specialized company in environmental measurement, investigation and analysis, and ISO consulting. This document introduces the fees for "drinking water quality testing (related to building management law)." It covers items such as "general bacteria," "nitrate and nitrite nitrogen," and "chloride ions." We encourage you to read it. [Items Listed] ■ Drinking Water Quality Testing All Items ■ Drinking Water Quality Testing 10 Items ■ Drinking Water Quality Testing 15 Items ■ Drinking Water Quality Testing 20 Items ■ Disinfection By-products 1 Set *For more details, please refer to the PDF document or feel free to contact us.

• others

Mitsuba Environmental Solutions Co., Ltd. is a specialized company in environmental measurement, research and analysis, and ISO consulting. This document introduces the analysis fees for "soil and fertilizer-related" substances. The target substances include "moisture," as well as "arsenic (As)" and "total mercury (T-Hg)," among others. Please take a moment to read it. [Items Listed] ■ Moisture ■ pH ■ Electrical conductivity ■ Total nitrogen (T-N) ■ Total carbon (T-C) ■ Total phosphorus (P2O5) *For more details, please refer to the PDF document or feel free to contact us.

• others

Mitsuba Environmental Solutions Co., Ltd. is a specialized company in environmental measurement, research and analysis, and ISO consulting. This document introduces the analysis fees for "general food components." The analysis includes items such as "moisture," "protein," "lipids," and "ash." We encourage you to read it. [Items Listed] ■ Moisture ■ Protein ■ Lipids ■ Ash ■ Crude Fiber ■ Dietary Fiber (AOAC method) ■ Salt (measured by atomic absorption spectrophotometry, converted to Na) *For more details, please refer to the PDF document or feel free to contact us.

• others

Mitsuba Environmental Solutions Co., Ltd. is a specialized company in environmental measurement, investigation and analysis, and ISO consulting. This document introduces the fees for measuring and analyzing "smoke, odor, noise, and vibration." In the "Noise and Vibration Measurement" section, we provide information on the basic hourly rates and frequency analysis. We encourage you to read it. [Contents] ■ Facilities generating smoke ■ Odor ■ Noise measurement ■ Vibration measurement *For more details, please refer to the PDF document or feel free to contact us.

• others

Mitsuba Environmental Solutions Co., Ltd. is a specialized company in environmental measurement, research and analysis, and ISO consulting. This document introduces the basic fees for "work environment measurement" both excluding and including tax. It lists measurement items such as "dust," "organic solvents/special substances/metals," and "noise," so please take a moment to read through it. [Listed Items] ■ Dust ■ Organic solvents/special substances/metals ■ Noise ■ Illuminance ■ Temperature, humidity, and black globe radiation heat ■ Carbon dioxide ■ Oxygen *For more details, please refer to the PDF document or feel free to contact us.

• others

Mitsuba Environmental Solutions Co., Ltd. is a specialized company in environmental measurement, investigation and analysis, and ISO consulting. This document introduces the fees for leaching tests and content tests for "industrial waste." We have listed the prices for each target substance, including "mercury," "organic phosphorus compounds," and "hexavalent chromium compounds," both excluding and including tax, so please take a moment to read through it. [Contents] ■ Leaching Tests ■ Content Tests *For more details, please refer to the PDF document or feel free to contact us.

• others

Mitsuba Environmental Solutions Co., Ltd. is a specialized company in environmental measurement, investigation and analysis, and ISO consulting. This document introduces the fees for "surface analysis," both excluding and including tax. Testing methods include "Energy Dispersive X-ray Microscopy (EDX)," "Electron Probe Microanalysis (EPMA)," and "Auger Electron Spectroscopy (AES)," among others. We invite you to read on. [Contents] ■ Observation of metal microstructure, etc. ■ SEM ■ Fracture surface analysis (additional charges for SEM observation) ■ Energy Dispersive X-ray Microscopy (EDX) ■ Electron Probe Microanalysis (EPMA) ■ Auger Electron Spectroscopy (AES) ■ X-ray Photoelectron Spectroscopy (XPS) *For more details, please refer to the PDF document or feel free to contact us.

• others

Mitsuba Environmental Solutions Co., Ltd. is a specialized company in environmental measurement, research and analysis, and ISO consulting. This document introduces the fees for "compound structure analysis," both excluding and including tax. We have listed the examination items such as "pre-treatment," "standard measurement KBr, measurement, analysis," and "microscopic method measurement, analysis," so please take a look. [Listed Items] ■ FT-IR ■ Gas Chromatography Mass Spectrometry (GC-MS) ■ X-ray Diffraction ■ Ultraviolet-Visible Spectrophotometry ■ Thermal Analysis *For more details, please refer to the PDF document or feel free to contact us.

• others

Mitsuba Environmental Solutions Co., Ltd. is a specialized company in environmental measurement, investigation and analysis, and ISO consulting. This document introduces the fees for "Organic and Inorganic Substance Analysis." We have listed the testing items such as "Sample Pretreatment," "Qualitative Analysis for 1 Sample," and "Quantitative Analysis for 1 Component," so please take a moment to read through it. [Listed Items] ■ Atomic Absorption Analysis (Single Element) ■ Ion Chromatography Analysis ■ Liquid Chromatography Analysis (HPLC) ■ Gas Chromatography Analysis (GC) ■ Molecular Weight Measurement (Viscometric Method) ■ Molecular Weight Distribution Measurement (GPC/HPLC) *For more details, please refer to the PDF document or feel free to contact us.

• others

Mitsuba Environmental Solutions Co., Ltd. is a specialized company in environmental measurement, investigation and analysis, and ISO consulting. This document introduces the fees for "Chemical Component Analysis of Metals" both excluding and including tax. We have listed the testing methods such as "X-ray Fluorescence," "Heating Melting Method," and "Chemical Analysis," so please take a moment to read through it. 【Listed Testing Methods】 ■ X-ray Fluorescence: Low Alloy / Stainless Steel, etc. ■ X-ray Fluorescence: Tool Steel / Heat Resistant Steel, etc. ■ Heating Melting Method: Low Alloy / Stainless Steel, etc. ■ Chemical Analysis: Low Alloy / Stainless Steel, etc. ■ Chemical Analysis: Aluminum Alloy / Copper Alloy, etc. *For more details, please refer to the PDF document or feel free to contact us.

• others

Mitsuba Environmental Solutions Co., Ltd. is a specialized company in environmental measurement, research and analysis, and ISO consulting. This document introduces the fees for "durability testing." It includes the "basic fees" and "processing costs" under standard conditions (63°C, rainfall 18 minutes/120 minutes) as well as under non-standard conditions, so please take a moment to read through it. [Contents (partial)] <Standard conditions: 63°C, rainfall 18 minutes/120 minutes> ■ For 1 to 4 panels ■ For 5 panels or more <Non-standard conditions> ■ For 1 to 9 panels ■ For 10 panels or more *For more details, please refer to the PDF document or feel free to contact us.

• others

Mitsuba Environmental Solutions Co., Ltd. is a specialized company in environmental measurement, investigation and analysis, and ISO consulting. This document introduces the fees for "corrosion testing." It includes the "basic fee" per one flat plate measuring 70×150mm for the "salt spray test," as well as the "processing fee" per plate per hour. Please take a moment to read it. [Contents] ■ Dimensions: 70×150mm flat plate Standard conditions: 5% saltwater, 35℃ - Basic fee per plate - Processing fee per plate per hour ■ Removal and installation of test specimens - Per occurrence - Return of test specimens mid-test per occurrence *For more details, please refer to the PDF document or feel free to contact us.

• others

Mitsuba Environmental Solutions Co., Ltd. is a specialized company in environmental measurement, research and analysis, and ISO consulting. This document introduces the fees for "Heat Resistance and Humidity Resistance Testing." We have listed the costs for each item, such as "per unit per day," "sample extraction," and "sample return fees," so please take a moment to read through it. [Listed Items (Excerpt)] ■ Heat Resistance Testing - Initial: Up to 1 unit per day - Subsequent additions: Per unit per day ■ Constant Temperature and Humidity Testing - Initial: Up to 1 unit per day - Subsequent additions: Per unit per day *For more details, please refer to the PDF document or feel free to contact us.

• others

Mitsuba Environmental Solutions Co., Ltd. is a specialized company in environmental measurement, investigation and analysis, and ISO consulting. This document introduces the fees for "physical property testing" both excluding and including tax. We have listed 11 items including "Charpy impact test" and "Izod impact test," so please take a moment to read through it. [Listed Items (Partial)] ■ Specific gravity measurement ■ Tensile test ■ Bending test / Compression test ■ Charpy impact test ■ Izod impact test ■ Pencil hardness ■ Durometer hardness *For more details, please refer to the PDF document or feel free to contact us.

• others

Mitsuba Environmental Solutions Co., Ltd. contributes to solving customer problems with reliable technology. In the "Ministry of the Environment Energy Saving Solutions Project," we visualize energy and support energy-saving improvements. We also implement the "New 5S Activity Support," where everyone works together to create systems that lead to cost reduction and increased sales. Additionally, as part of our efforts to improve the workplace, we conduct "Labor Safety and Health / Work Environment Improvement Support," and we achieve energy savings in lighting through the replacement of fluorescent tubes with LEDs in our "LED - Creating Environmentally Friendly Light" initiative. [Content (partial)] <Ministry of the Environment Energy Saving Solutions Project> ■ Energy saving in lighting power through LEDs ■ Energy saving in air conditioning equipment / air conditioning unit cleaning ■ Visualization through demand monitoring ■ Support for energy-saving improvements in air compressors ■ Energy-saving diagnosis / cost reduction support / carbon dioxide emission trading support *For more details, please refer to the PDF document or feel free to contact us.

• others

Mitsuba Environmental Solutions conducts "welding fume measurement." We offer advice on ventilation conditions and consultations regarding compliance with legal amendments. Additionally, we will answer various questions you may have, such as, "What types of welding are subject to regulatory strengthening?" "Is robotic welding included?" "What happens if manganese levels exceed the standard?" So please feel free to contact us when you need assistance. 【We address questions like these】 ■ What types of welding are subject to regulatory strengthening? ■ Is robotic welding included? ■ What happens if manganese levels exceed the standard? ■ What if the frequency of welding work is low? ■ What if there are multiple welding workplaces? ■ Are there penalties? *For more details, please refer to the PDF document or feel free to contact us.

• others

Mitsuba Environmental Solutions Co., Ltd. will hold an "Environmental Seminar for the Manufacturing Industry" at G-Messe Gunma, in the medium conference room. In this seminar, we will carefully explain the key points of each theme and what can be expected in the future. By learning and deepening our understanding of the broader context and fundamentals of environmental issues and occupational health, participants can expect to gain new insights for their businesses. You can choose to participate in person or online. We sincerely look forward to your participation. 【Seminar Overview】 ■ Date: September 14, 2022 (Wednesday) 13:30 - 16:30 (Registration starts at 13:00) ■ Venue: G-Messe Gunma, Medium Conference Room (12-24 Iwaoshicho, Takasaki City) ■ Participation Fee: Free ■ Application Deadline: September 9, 2022 (Friday) *Registration will close once capacity is reached. *For more details, please refer to the PDF document or feel free to contact us.

• others

Our company provides consulting on "Eco Action 21," which establishes a framework for environmental management that is easy for small and medium-sized enterprises to adopt. Eco Action 21 identifies key environmental impacts that must be understood in environmental management, including carbon dioxide emissions, waste emissions, total wastewater volume, and chemical substance usage. Additionally, it clearly outlines examples of initiatives to reduce these impacts and efforts related to the environment in core business activities, thereby improving environmental performance. 【Features of Eco Action 21】 ■ An easy-to-implement environmental management system ■ A focus on specific environmental initiatives ■ Engagement in environmental reporting (environmental communication) *For more details, please refer to the related links or feel free to contact us.

• others

Mitsuba Environmental Solutions provides consulting services for companies considering obtaining ISO certification. We create the core documents required by ISO based on interviews, and then review and establish the created documents with the promoting members. Additionally, instead of the common "reverse of the standard" ISO documents, we create them in flowchart format, thus avoiding unnecessary documents and records. 【Features】 ■ Reduces the time spent on documentation and lightens the burden on promoting members ■ Advances with practical guidance rather than theoretical instruction ■ Builds a system tailored to your company based on current conditions ■ Makes effective use of guidance time to resolve issues during the instruction *For more details, please refer to the related links or feel free to contact us.

• others

Mitsuba Environmental Solutions provides support for the implementation of the SDGs. Through consulting by experts, we deepen the understanding of the SDGs and make the challenges in management strategies apparent. We help you learn methods for setting goals and creating action plans that are beneficial for management, and support the introduction within your company. By being aware of ESG, we consider your company's advantages as well as risks and threats through value chain mapping. 【Benefits of Implementation】 ■ Recognize management risks and opportunities, and use it as a tool to connect to business opportunities ■ Reassess your philosophy and clarify your purpose ■ Become a company that is chosen ■ Contribute to recruitment and employee retention ■ Foster a corporate culture that emphasizes compliance (measures against harassment, etc.) *For more details, please refer to the related links or feel free to contact us.

• others

The issue of microplastic waste in oceans and rivers is gaining global attention. Our company conducts "microplastic analysis" (sampling, particle measurement, and particle material analysis) using pseudo-samples to address this issue. We added pseudo-samples to water, performed suction filtration, and dispersed them on filter paper to conduct particle counting measurements using light scattering analysis. 【Features】 ■ Three types of pseudo-samples ■ Added pseudo-samples to water for suction filtration and dispersion on filter paper ■ Conducted particle counting measurements using light scattering analysis ■ Automatically counts collected particles in descending order, allowing for particle measurement ■ Detailed analysis of counted particles is possible *For more details, please refer to the related links or feel free to contact us.

• others

Our company conducts dynamic mechanical analysis (DMA) of polymers. By applying a strain or stress that changes (vibrates) over time to the sample and measuring the resulting stress or strain, we can assess the mechanical properties of the sample. When considered as a method of thermal analysis, it can be interpreted as a technique for measuring the mechanical properties of the sample as a function of temperature in response to vibrational loads (or strains). 【Features】 ■ Applicable to a wide range of materials by using different deformation modes ■ Capable of measuring temperature dependence and frequency dependence ■ Able to observe various relaxation phenomena, including glass transition ■ Provides information about the molecular structure and molecular motion of polymers *For more details, please refer to the related links or feel free to contact us.

• others

Mitsuba Environmental Solutions conducts material and defect analysis using a "rotational rheometer." The "ARES-G2" manufactured by TA Instruments Japan Co., Ltd. can measure the thermal properties, mechanical properties, and rheological properties of polymer materials such as plastics and rubber. It employs a torsional excitation method, with measurement examples including frequency dependence, shear rate dependence, temperature dependence, and viscosity. 【ARES-G2 Specifications】 ■ Measurement temperature range: -130 to 500℃ ■ Torsional excitation method ■ Angular frequency range: 10^-7 to 628 rad/sec ■ Torque range: 0.05 μNm to 200 mNm ■ Strain range: 1 μrad to infinity ■ Geometry: Parallel plates (φ25, 50mm) *For more details, please refer to the related links or feel free to contact us.

• others

At Mitsuba Environmental Solutions, we conduct material and defect analysis using the "Dynamic Ultra-Micro Hardness Tester." The SHIMADZU "DUH-211S" measures the relationship between load and indentation depth at micro areas of the surface (0-10µm) in real-time to evaluate surface properties. In a case comparing the surface hardness of enamel coatings on copper wires, it was found that "imported products have higher surface hardness and lower elastic modulus." 【DUH-211S Specifications】 ■ Test force: 0.1 to 1961mN, minimum measurement unit 0.196μN (for tests below 1.96mN) ■ Indentation depth measurement: 0 to 10μm, minimum measurement unit 0.0001μm ■ Indenter: Triangular pyramid indenter (apex angle 115 degrees, Berkovich type) ■ Microscope magnification: 500x (objective 50x, eyepiece 10x) ■ Types of tests: 7 types *For more details, please refer to the related links or feel free to contact us.

• others

Our company offers "X-ray Microfocus Inspection: X-ray CT Imaging." X-rays are irradiated onto the sample, which is rotated 360 degrees on the sample stage for imaging. This non-destructive method allows for three-dimensional observation of a wide range of products, including internal structures and defects. Due to the varying penetrability of X-rays, contrast is created based on the constituent elements (density). Elements with higher density appear bright, while those with lower density appear dark. 【Features】 - Target sample size: Diameter 150 × Height 170 mm (for vertical imaging) with a weight of 5 kg - X-rays are irradiated onto the sample, which is rotated 360 degrees on the sample stage for imaging - Enables three-dimensional observation of a wide range of products, including internal structures and defects - Contrast is created based on the constituent elements (density) due to the varying penetrability of X-rays - Elements with higher density appear bright, while those with lower density appear dark *For more details, please refer to the related links or feel free to contact us.

• others

At Mitsuba Environmental Solutions, we conduct "confocal microscope measurements" using a confocal microscope. The laser microscope "OPTELICS HYBRID" manufactured by Lasertec can obtain high-resolution images with a sharp focus across the entire field of view on samples with uneven surfaces. It enables non-destructive, non-contact three-dimensional shape measurement. High magnification and high-resolution observation with a 405nm laser beam clearly visualizes ultra-fine structures. 【Measurement Range】 ■ Width Measurement - Minimum measurement unit: 0.001μm, measurement reproducibility: 3σ < 10nm ■ Height Measurement - Scale resolution: 0.4nm, measurement reproducibility: σ < 10nm, measurement range: 7mm *For more details, please refer to the related links or feel free to contact us.

• others

Mitsuba Environmental Solutions conducts "cleanliness surveys" of products. We collect foreign substances within the process on filters and perform measurements of suspended particles and compositional analysis. Analysis using MICRO QUICK (particle scanner for component cleanliness inspection) can analyze particle size, quantity, shape, and classification on the filter, and it is also possible to collect foreign substances for detailed analysis such as EDX and FT-IR. 【Features】 ■ Measurement of suspended particles and compositional analysis ■ Cleaning of products and collection of foreign substances on filters (in accordance with VDA-19.1) ■ Analysis using MICRO QUICK - Capable of analyzing particle size, quantity, shape, and classification on the filter - Foreign substances can be collected for detailed analysis such as EDX and FT-IR *For more details, please refer to the related links or feel free to contact us.

• others

We would like to introduce a case study on "Material and Defect Analysis" that our company has conducted. In the investigation of foreign substances and contaminants, we carried out material analysis of contaminants on the plating section of mobile phone antennas and conducted research on rubber blooming. Additionally, we have numerous case studies related to product and component damage, as well as rust and corrosion. 【Case Studies】 ■ Investigation of foreign substances and contaminants ■ Investigation of product and component damage ■ Analysis of material composition and generated substances ■ Surface investigation of electronic components, contacts, and appearance products ■ Investigation related to material properties and product reliability testing ■ Investigation related to rust and corrosion *For more details, please refer to the related links or feel free to contact us.

• others

Mitsuba Environmental Solutions conducts "physical property investigations." We mainly perform tensile tests, bending tests, and compression tests on resin materials, as well as hardness measurements, microhardness testing, and viscoelasticity tests. For example, in differential scanning calorimetry (DSC), we can evaluate the thermal properties of materials (such as endothermic and exothermic reactions due to melting and crystallization, glass transition, specific heat capacity, and thermal history) based on changes in heat flow when the temperature is varied. [Target] ■ Tensile tests, bending tests, compression tests (mainly for resin materials) ■ Hardness measurements (Rockwell hardness, Vickers hardness), microhardness testing (DUH) ■ Viscoelasticity tests (DMA, rheometer) ■ Thermal properties: DSC, TGA, TMA *For more details, please refer to the related links or feel free to contact us.

• others

Mitsuba Environmental Solutions conducts "Organic and Inorganic Composition Analysis." We utilize various instruments including FT-IR analysis, py-GCMS analysis, and thermal analysis devices (DSC, TGA, TMA). By performing GCMS analysis, we can obtain information about polymer materials and additives for organic materials that are difficult to assess using FT-IR alone. Additionally, in "Metal Component Analysis," we conduct qualitative and quantitative analyses using XRF analysis, atomic absorption analysis, and gravimetric methods. 【Features】 ■ Organic Composition Analysis, Thermal Analysis - Instruments used: FT-IR analysis, py-GCMS analysis, various thermal analysis devices (DSC, TGA, TMA) ■ Metal Component Analysis - Qualitative analysis, quantitative analysis - Instruments used: XRF analysis, atomic absorption analysis, gravimetric methods, etc. *For more details, please refer to the related links or feel free to contact us.

• others

Mitsuba Environmental Solutions Co., Ltd. is a specialized company in environmental measurement, research and analysis, and ISO consulting. Our company promotes initiatives toward decarbonization and provides subsidies to small and medium-sized enterprises that own factories or business sites with CO2 emissions between 50 tons and less than 3,000 tons. As part of the Ministry of the Environment's subsidy project "Decarbonization Promotion Plan," we offer "diagnosis" and "subsidy support agency" services. If you are overwhelmed by the many necessary documents and unsure about what to prepare or write, this is a must-see! Please feel free to consult with us first. 【Subsidy Eligibility】 ■ Fees related to the diagnosis of CO2 emission reduction potential and support for the formulation of the "Decarbonization Promotion Plan" (labor costs, business expenses, general administrative expenses) ■ Expenses incurred before the grant decision and expenses related to the application procedures for this project, as well as regular operating expenses, are not eligible. *For more details, please refer to the PDF materials or feel free to contact us.

• others

Environmental standards have been established as desirable criteria for maintaining environmental conditions related to water quality pollution in public water areas, in order to protect human health and preserve the living environment. The environmental standards concerning the protection of human health are uniform across all public water areas. Our company conducts "water quality analysis" and provides services such as improvement proposals. We contribute to solving our customers' problems. 【Overview of Environmental Standards】 ■ The environmental standards concerning the protection of human health are uniform across all public water areas. ■ Facilities that discharge water from factories or business sites with specific installations are required to comply with discharge standards. ■ Substances regulated by discharge standards are broadly classified into two categories: - Items related to wastewater containing substances that may cause harm to human health. - Items indicating the state of water pollution (living environment items). *For more details, please refer to the related link page or feel free to contact us.

• others

For companies, the increase in electricity rates is a matter of survival, and reducing electricity costs is an urgent task. Instead of blindly cutting electricity, why not achieve results without overexertion? By outsourcing electrical facility safety management to our company, we will install demand monitoring devices and realize the visualization of electricity usage. Using visualization as a starting point, we will lead to the introduction of an energy management system, achieving further energy savings and reducing CO2 emissions. 【Service Contents】 ■ Safety management services (monthly inspections, annual inspections) ■ Demand monitoring system ■ Thorough visual inspections ■ Energy-saving diagnostics / cost reduction services *For more details, please refer to the related link page or feel free to contact us.

• others

"5S Implementation Support" refers to activities aimed at creating a profit-generating system that leads to cost reduction and increased sales, based on the traditional 5S principles, with participation from everyone. Top management takes the lead in participating, re-engaging with a fresh mindset to improve 5S, and by working together, it fosters a "company culture" that includes not just numbers but also a bright workplace atmosphere. 【Objectives and Goals of 5S】 ■ Thoroughly eliminate unnecessary items from the current situation ■ Make waste visible to facilitate the elimination of waste ■ Recognize abnormalities to enable waste improvement activities *For more details, please refer to the related links or feel free to contact us.

• others

In "Energy Saving Consulting," our technical specialists (Energy Managers) will visit you directly to check the energy usage situation, such as electricity, and the operational status of your equipment, and we will propose a diagnostic report (improvement measures) suitable for your company. The diagnostic report will include energy-saving measures that minimize new investments (technical support to improve the use of existing equipment) and proposals that consider cost performance. 【Process for Requesting Services】 ■ Consultation on Issues ■ Investigation (Measurement) ■ Improvement Proposal ■ Proposal for Utilizing Subsidies ■ Results Report *For more details, please refer to the related link page or feel free to contact us.

• others

The card game "2030 SDGs" is an experience that allows players to journey from the present to 2030 in order to achieve the 17 goals of the SDGs. This game is not designed for in-depth study of each individual SDG goal. Instead, it is a game that helps players experientially understand "why the SDGs are necessary for our world" and "what changes and possibilities arise from having the SDGs." For businesses, we incorporate case studies during reflections and share the connections between the SDGs and business. 【Features】 ■ Understand the essence of the SDGs while having fun ■ Suitable for a minimum of 5 participants, up to about 50 ■ Designed to accommodate simultaneous play for up to about 200 participants ■ Workshops typically last around 3 hours, with a minimum of 2 hours *For more details, please refer to the related links or feel free to contact us.

• others

Our company conducts inspections of local exhaust ventilation systems. When installing local exhaust ventilation systems, there are various regulations regarding control air velocity, the installation position of exhaust fans, and duct construction. These matters are stipulated by the Labor Safety and Health Act, the Organic Solvent Poisoning Prevention Regulations, and the Specific Chemical Substances and Other Hazard Prevention Regulations. When installing a local exhaust ventilation system, it is mandatory to notify the relevant Labor Standards Inspection Office. For the design and construction of local exhaust ventilation systems as hygiene engineering devices, based on compliance, please leave it to Mitsuba Environmental Solutions. 【Inspection Flow】 ■1. Is the airflow uniform? ■2. Is the opening surface air velocity above the legal control air velocity? ■3. Are there any deposits in the duct? ■4. Is the damper opening and closing properly, and are there any duct leaks? ■5. Are there any unusual noises or appearance issues with the motor? ■6. What are the temperatures of the motor, bearings, etc.? *For more details, please refer to the related links or feel free to contact us.

• others

Before conducting the measurements, we will have sufficient discussions to propose measurements that align with the customer's requests. The results will include: - Modes of failure - [Resin fracture surface] Examples: brittle fracture, creep fracture, molding defects, foreign material adhesion, etc. - [Metal fracture surface] Examples: impact fracture, fatigue fracture, ductile fracture, intergranular fracture, etc. - Photographs of the fracture surfaces We will provide photographs of both resin and metal fracture surfaces taken with an electron microscope or a metallurgical microscope. Please refer to the PDF materials for examples of the report.

• others

Our company conducts "work environment measurements." There are various hazardous factors in the work environment that can adversely affect the human body of workers. The Labor Safety and Health Act stipulates that regular work environment measurements must be conducted to protect the safety and health of workers from these hazards. Specific chemical substances such as organic solvents, dust, lead, as well as noise and vibration are included in this scope. At Mitsuba Environmental Solutions, we assist in making your workplace more comfortable through consistent support before and after measurements. Please utilize our services for the improvement of your workplace. 【Overview】 ■ Regular voluntary inspections of local exhaust systems ■ Diagnosis and guidance of work environments ■ Design and construction of local exhaust systems ■ Consulting services such as support for building labor health management systems *For more details, please refer to the related links or feel free to contact us.

• others

At Mitsuba Environmental Solutions, a subsidiary of Mitsuba Corporation, we offer analysis technology for automotive parts manufacturers at a low cost. We can handle foreign substances larger than 100μm. For sizes smaller than that, please consult us. We observe shapes and conditions using an electron microscope and conduct elemental analysis. For organic materials, we estimate structures at the functional group level. Please refer to our website or catalog for case studies on foreign substances, discoloration, and contaminants. ■ Investigation of foreign substances mixed into phenolic resin parts ■ Investigation of black foreign substances embedded in white resin parts ■ Investigation of discolored areas on zinc-plated steel parts ■ Investigation of blackened areas on copper components *For more details, please refer to the PDF materials or visit our website.

• others

Our company offers analysis services for the causes of damage to metal and plastic parts. After you send us the samples, we will confirm the analysis details and conduct the analysis, then promptly report the results via fax. The final report will be sent by mail. Additionally, we provide services for the procurement of general samples. We also accept requests for plastic products and aluminum die-cast items, so please feel free to inquire. 【Features】 ■ Procurement of general samples is provided as a service ■ Capable of handling plastic products and aluminum die-cast items ■ Analysis results reported within 5 to 10 days after sample arrival *For more details, please refer to our catalog or feel free to contact us.

• others

Our company conducts dioxin measurement services for exhaust gases from incineration facilities. We analyze three types of dioxins: exhaust gas, fly ash, and incineration ash (as a set), and we will report the results within two months after sampling. If your company is facing issues with measurement costs, please feel free to consult with us. 【Features】 ■ Prices are negotiable ■ Reports within two months after sampling *For more details, please refer to our catalog or feel free to contact us.

• others

Our company offers "ISO 9001/14001 certification support services," contributing to solving our customers' problems with reliable technology. We provide total support from the certification acquisition process to the maintenance of the system after obtaining certification. Based on the know-how we have cultivated, we offer services tailored to your needs. We are committed to providing full support consulting for the introduction and utilization of ISO that suits your organization. Please feel free to contact us. 【Features】 ■ Provision of specialized know-how ■ Certification acquisition support that maximizes local advantages ■ Support for system construction suitable for the size of companies and organizations *For more details, please refer to our catalog or feel free to contact us.

• others