日進機工 List of Products and Services

Nisshin Kiko Co., Ltd. will be exhibiting at the "Construction Technology Exhibition 2024 Kinki" held in Osaka and the "Construction Technology Fair 2024 in Chubu" held in Nagoya. The main exhibits will include an introduction to the water jet drilling method and the simple cross-section measurement app "DigiMeasurer." We plan to demonstrate the "DigiMeasurer" app using a simple concrete model on-site. Please feel free to consult us about other methods and construction techniques as well. We sincerely look forward to your visit. *For details on each exhibit, please check the "Specifications" section below.

• others

We would like to introduce the simple cross-sectional measurement app "DigiMeja," handled by Nisshin Kiko Co., Ltd. It achieves "reduction of work and measurement time" and "labor saving." With DigiMeja, you can enlarge, reduce, rotate, and move 3D models. Please feel free to consult us when you need assistance. 【Features】 ■ Utilizes LiDAR technology from Apple products ■ Easy to understand, mimicking traditional measurement methods ■ Achieves low prices by keeping development costs down ■ Easy to operate for anyone * Apple, iPad, and iPad Pro are trademarks of Apple Inc., registered in the U.S. and other countries. * For more details, please download the PDF or feel free to contact us.

• Other measuring instruments

Utilize Apple products' LiDAR! Easy to understand, mimicking traditional measurement methods! Achieve low prices while keeping development costs down! *Apple, iPad, and iPad Pro are trademarks of Apple Inc., registered in the U.S. and other countries.* 【The method is simple】 STEP 1 ... Create a model STEP 2 ... Set the measurement range STEP 3 ... Measurement and quantity calculation STEP 4 ... Send results

• Other Software

Laser cleaning is a laser cleaning technology that irradiates metal surfaces to remove rust, oil, and paint! It is an item that is less likely to damage the material, does not use any chemicals, and is easy to manage. ■ Features - Cleaning can be performed without damaging the metal surface! - No chemicals are used, making it environmentally friendly! - The galvanometer mirror inside the laser head allows for adjustment of the laser irradiation range up to 200mm! - Capable of extensive cleaning in a short time! - Simply plug in the AC100V power supply, and anyone can easily use it! - It is portable, making it easy and convenient to carry! - No qualifications are required! - Even women can use it easily! *If you would like to request a test installation, please feel free to contact us. ■ We will exhibit at the '2024 Cleaning Comprehensive Exhibition' ■ Date: September 18 (Wed) - September 20 (Fri), 2024, 10:00 - 17:00 Venue: Tokyo Big Sight, East Exhibition Hall 1F Booth Number: East Hall 4, W-63, Japan Water Jet Society booth Exhibited Products: Various water jet devices, methods, and laser cleaning systems.

• Special Construction Method

Dramatically reduce the temperature under the roof with zero running costs! Significantly reduce heat loss! Increase energy-saving effects! Most of the heat transfer within a building is radiant heat. When considering measures against heat, the most important factor is how to suppress radiant heat. Prox thermal insulation sheets block 97% of the radiant heat that causes heat.

• Heat shielding sheet

Currently, the method we recommend, WJ (Water Jet) method, is a drilling method. By using WJ for concrete drilling, it is a method that prevents the occurrence of microcracks and avoids the risk of damage to rebar and disconnection of PC cables. It demonstrates its effectiveness when creating pilot holes for anchor bolts in existing structures. Features include a structure that simultaneously sucks up the sludge water generated during drilling and the installation of a splash prevention cover at the nozzle tip, which enhances work safety and minimizes the impact on the surrounding environment. Additionally, since cleaning inside the hole can be completed simultaneously with the construction, this allows for a reduction in construction time, and the finishing of the hole walls becomes uneven, improving fastening effectiveness. *For more details, please refer to the PDF materials or feel free to contact us.

• Special Construction Method

The "Water Jet Handgun Chipping Method" allows for a high adhesion effect, making it easy to integrate with repair materials and achieve high-quality repairs. It is possible to remove weak parts of concrete without damaging the healthy parts (remaining parts) of concrete structures or existing rebar. 【Features】 ■ Gentle on the structure ■ Not affected by weather ■ Vibration-free construction ■ Non-cracking, suppressing re-deterioration after repair ■ High repair effectiveness *For more details, please refer to the PDF materials or feel free to contact us.

• Other construction services

The "Water Jet Machine Chipping Method" is a chipping method that allows for easy construction of a uniform treatment surface using water. Since it uses "ultra-high pressure water" primarily based on air, it is not affected by weather conditions such as rain. 【Features】 ■ Can remove weak parts of concrete without damaging the structure ■ Not influenced by weather ■ Non-cracking and vibration-free construction is possible ■ Uniform finish ■ High construction effectiveness *For more details, please refer to the PDF document or feel free to contact us.

• Other construction services

The "Water Jet Narrow Area Chipping Method" is a chipping technique that allows for the removal of weak parts of concrete in narrow areas without damaging the sound parts (remaining parts) or reinforcing bars. The water jet enables vibration-free construction. This helps prevent the induction of cracks in the remaining structure, thereby reducing the risk of re-deterioration after repairs. 【Features】 ■ Gentle on the structure ■ Not affected by weather ■ Vibration-free construction possible ■ Uniform finish ■ High construction effectiveness *For more details, please refer to the PDF document or feel free to contact us.

• Other construction services

Laser cleaning is the latest laser cleaning technology that irradiates metal surfaces with lasers to remove rust, oil, and paint! It is an item that is less likely to damage the material and is easy to manage without the use of chemicals. ■ Features - Cleaning can be performed without damaging the metal surface! - No chemicals are used at all, making it environmentally friendly! - The galvanometer mirror inside the laser head allows for adjustment of the laser irradiation range up to 200mm! - Capable of cleaning a wide area in a short time! - Simply plug in the AC100V power supply, and anyone can easily use it! *For more details, please download the materials or contact us through our website.

• Special Construction Method

This is a removal cleaning method utilizing water jet technology. ―― Advantages ―― 1. Shortened construction period. 2. Dust-free, optimal environmental construction. 3. Complete stripping and high-quality management. 4. Small team construction. 5. Reduction of asbestos waste volume and suppression of industrial waste disposal. Unlike conventional methods, the water jet method has significant advantages in quality management, work environment management, process management, and safety management. Additionally, by using a diatomaceous earth filtration system for wastewater, we can treat asbestos-containing wastewater at the micron level. Based on numerous construction achievements, we confidently propose this to our customers.

• Special Construction Method

This is a method for asbestos removal and cleaning using a water jet. ―― Process ―― 1. Manual surface stripping (large capacity areas) 2. Dust-free complete removal down to the substrate using WJ. 3. Complete recovery as wet dust. 4. Complete recovery and separation of wastewater. 5. Achieving process shortening while reducing the volume of discharged asbestos.

• Renovation and repair methods

The jet sweeper is a device that rotates and sprays ultra-high-pressure water onto the road surface, using that energy for surface treatment. Depending on the condition of the target object and the purpose or application, it can achieve appropriate roughness, uneven surfaces, paint film removal, and cleaning results. Additionally, the water used in the work and the removed materials are collected by connecting a hose to a shell with a suction function, which is then connected to a powerful suction vehicle to preserve the environment at the site.

• Other civil engineering works

The jet sweeper method involves rotating high-pressure water jets on the road surface to treat it using that energy. Depending on the condition of the target object and the intended purpose or use, it is possible to achieve appropriate roughness, uneven surfaces, as well as results for paint film removal and cleaning. Additionally, the water used in the work and the removed materials are collected by connecting a hose to a shell with a suction function, which is then connected to a powerful suction vehicle, thereby preserving the environment at the site.

• Other civil engineering works

This is an introduction to comprehensive seismic reinforcement work centered around "concrete chipping treatment" using ultra-high-pressure jets. Without damaging the rebar, we can chip away the specified volume while ensuring adhesion strength with the sound parts, making it a foundational work for seismic reinforcement. We have been utilizing this method through joint development with management organizations and companies of various structures.

• Bridge Construction

The abrasive water jet cutting method involves mixing a special abrasive with water and spraying it at ultra-high pressure to perform cutting! As a pioneer in water jet technology, we have developed cutting devices and construction methods optimized for various sites and target materials, achieving significant results! The pumps we partner with operate at pressures of 200 to 280 MPa. Our self-developed EcoMaster Magnum pump unit is equipped with an engine that complies with low exhaust gas regulations, achieving low noise levels of 75 dB, and is active in various scenes! Due to the minimal vibration generated against the target structure, construction can be carried out even near operating equipment.

• Special Construction Method

As a member of the Pitacolumn Construction Method Association, we have accumulated a track record of construction achievements. Please consider us as a reliable seismic reinforcement method. ● We have assigned two certified "construction managers" in Tokyo, four in Nagoya, and three in Osaka to respond to requests from a wide area. ● The Pitacolumn (Plate Included concrete Tightly Attached column) method is one of the seismic reinforcement methods that allows reinforcement work to be carried out while the building is in use. ● The construction method involves first installing post-installed anchors at regular intervals on the existing columns to be reinforced. Steel plates (plates) are then attached to the anchors installed at a position 10 cm from the existing columns. Additionally, elliptical shear reinforcement bars (hoops) are distributed at regular intervals around these steel plates. Finally, approximately 20 cm thick concrete is poured to encase these elements, completing the work. The basic concept of Pitacolumn is to perform seismic reinforcement work without entering the interior of the building. ● Technical evaluation obtained from the Japan Architectural Disaster Prevention Association (July 13, 2001) ● Patent No. 3051071 ● Trademark Registration No. 4233798 ... Please view the comprehensive catalog on our special website ...

• Special Construction Method

We have accumulated a track record of removing deteriorated concrete that can only be achieved with ultra-high-pressure water jets. In order to strengthen structures and extend their lifespan, we will develop solutions that meet market needs in collaboration with everyone in the construction and design industries. We will provide information on our main construction methods and equipment in a three-page document.

• Dam construction

Based on surface treatment that can only be achieved with ultra-high-pressure water jets, we have accumulated a track record of construction achievements. The development of new water jet equipment and construction techniques is actively underway. We have also realized collaborations with various repair technology and material manufacturers. In order to enhance the aesthetics and extend the lifespan of structures, we will continue to develop solutions that meet market needs in cooperation with everyone in the construction and design industries.

• Pavement construction

At Nisshin Machine Works, we conduct sample tests tailored to our customers' needs and accept the development of custom-made cleaning and processing equipment. We propose suitable systems based on a thorough understanding of our customers' requests. We develop systems that create new value for our customers and design their original forms based on our reliable technological capabilities. Furthermore, we design and manufacture suitable equipment using our main technologies to specifically solve the challenges faced by our customers. [Original Products of Water Jet Processing and Cleaning Equipment] ■ Surface Treatment Equipment ■ Robot Processing Machines ■ Line Cleaning Machines ■ Deburring Cleaning Machines ■ Water Jet Cutting Equipment *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Water Jet Comprehensive Catalog" from Nippon Kiko Co., Ltd. is a comprehensive catalog featuring a wide range of water jet-related products. It includes a broad lineup, starting with the "Eco Master Magnum," which boasts a discharge pressure of up to 245 MPa, as well as the "Ultra High Pressure Triple Plunger Pump" and "Eco Top Gun." [Contents] ■ UNIT ■ PUMP ■ TOOL ■ ACCESSORY *For more details, please refer to the PDF document or feel free to contact us.

• Other construction services

The "Eco Master Neo" is a new high-performance plunger pump unit that boasts a maximum discharge pressure of 280 MPa. While inheriting the performance of our conventional product, the "Eco Master Magnum," it achieves a lightweight and compact design with a renewed aesthetic. Its thorough noise and vibration reduction design allows for nighttime operation. 【Features】 ■ Maximum discharge pressure of 280 MPa ■ Lightweight and compact ■ Improved pressure control functions compared to conventional models ■ Serves as a core unit for water jet construction methods *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• pump

The ultra-high-pressure pump unit "Eco Master Magnum" boasts a maximum discharge pressure of 245 MPa (2500 kgf/cm²) and is equipped with a high-performance WOMA-made plunger pump unit 250M. 【Features】 ■ Compact unit design allows for installation on a 4-ton truck while being soundproof ■ Equipped with an engine that complies with exhaust gas regulations set by the Ministry of Land, Infrastructure, Transport and Tourism ■ Automatic operation mode | Simply input the desired pressure, and it can operate automatically at that pressure ■ Low noise and low vibration | Thorough soundproofing and vibration-damping design enable nighttime operations *For more details, please contact us or download the PDF.

• Other construction services

The "Eco Master Compact" is a high-performance plunger pump unit that boasts a maximum discharge pressure of 245 MPa (2500 kg/cm²). It is equipped with a long-lasting, high-efficiency plunger pump that generates ultra-high-pressure water. The electric motor-driven unit achieves lightweight compactness, making it suitable for mounting on a 2-ton vehicle. (※ Depending on the power supply equipment) 【Features】 ■ Achieves a maximum discharge pressure of 245 MPa (2500 kgf/cm²) with ultra-high pressure and low flow rate ■ Lightweight compact design allows for mounting on a 2-ton vehicle ■ Equipped with a long-lasting and efficient plunger pump ■ Features a single-point hook and service fork for convenient loading and movement ※ For more details, please refer to the PDF document or feel free to contact us.

• Other construction services

The "Eco Master Twin Jet" is a high-performance ultra-high-pressure pump unit boasting a discharge pressure of 280MPa (2800kgf/cm²). It is equipped with two ultra-high-pressure pumps with a maximum discharge flow rate of 26L/min. Additionally, its thorough soundproofing and vibration-damping design allow for nighttime operation. 【Features】 - Equipped with two ultra-high-pressure pumps with a maximum discharge flow rate of 26L/min - Nighttime operation is possible due to soundproofing and vibration-damping design *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Super Jet" is the king of water jets, possessing both high-capacity discharge pressure and ultra-high-pressure discharge capabilities. It is effective for concrete demolition and similar tasks. Additionally, our company offers various methods including "ultra-high-pressure water jet technology," "pigging and mechanical methods," "chemical methods (circulation cleaning, oil flushing, etc.)," and "pipe lining methods." 【Features】 ■ Combines both large water volume and ultra-high pressure capabilities ■ Effective for concrete demolition and similar tasks *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Ultra High Pressure 3-Stage Plunger Pump" is an ultra high pressure pump boasting a maximum discharge pressure of 300 MPa. It is used in various applications and industries such as water jet cutting, concrete demolition, paint stripping, and rust removal. 【Lineup】 ■70M ■250M ■400M *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Eco Top Gun" is a direct spray gun designed to inject ultra-high-pressure water to focus on stripping and chipping away at the target object. Equipped with direct and flat spray nozzles, it demonstrates powerful performance in stripping paint from steel surfaces, removing rubber linings, and exposing internal rebar in concrete surfaces. Its lightweight and compact design ensures excellent workability. 【Features】 ■ Suitable for concentrated stripping and chipping of target objects ■ Lightweight and compact design for outstanding workability ■ Equipped with a trigger switch *For more details, please refer to the PDF document or feel free to contact us.

• Other construction services

The "High Pressure Gun 3000" features a design that does not use mechanical valves and incorporates a low-voltage micro switch. The high-pressure operation of the unit allows for switching on and off through the micro switch. This functionality ensures enhanced safety. 【Features】 ■ Design without mechanical valves ■ Incorporation of a low-voltage micro switch ■ On and off switching possible through the micro switch *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Eco Top Spin" is an air-driven ultra-high-pressure rotary gun that enhances cleaning effectiveness by rotating the nozzle tip. The spray pattern becomes a surface, eliminating uneven cleaning. It demonstrates powerful performance in stripping paint from steel surfaces, rubber linings, surface treatment of concrete, and preparing surfaces for paint coatings. 【Features】 - Improved cleaning effectiveness by rotating the nozzle tip - Spray pattern becomes a surface, eliminating uneven cleaning - Equipped with a rotary-linked trigger switch - Lighter than conventional models, reducing the burden on the operator *For more details, please refer to the PDF document or feel free to contact us.

• Other construction services

The "Speedy 3000" is a pneumatic rotary drive that incorporates an air motor. It allows for adjustment of the rotation speed based on air pressure and volume, and features a lightweight and compact design. All components are made from high-tensile stainless steel. 【Features】 ■ Built-in air motor ■ Adjustable rotation speed based on air pressure and volume ■ Lightweight and compact design ■ All components made from high-tensile stainless steel *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Eco Top Drill" is a super high-pressure attachment that rotates the lance to remove hard blockages inside the tube. The lance length and nozzle type can be changed according to the application. 【Features】 ■ Rotates the lance to remove hard blockages inside the tube ■ Lance length and nozzle type can be changed according to the application *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Turbo Nozzle" is a super high-pressure attachment that rotates the nozzle head due to the reaction force of the ultra-high-pressure water jet. The rotation speed can be easily adjusted and changed according to the object being cleaned. It can be attached to various types of guns for use. 【Features】 ■ Rotation speed is easily adjustable ■ Can be changed according to the object being cleaned *For more details, please refer to the PDF document or feel free to contact us.

• others

The "ET Surface" is a water jet attachment for wall surface treatment that allows for uniform cleaning. The flat type is for wall and flat surface treatment. The corner type (ET Surface CR) is designed for wall corner (angle) treatment. By rotating the tip nozzle with an air motor, uniform cleaning treatment is achieved. By connecting a suction device, it is possible to simultaneously collect treated water and removed materials. 【Features】 ■ Equipped with a rotation-linked trigger switch ■ The air motor rotates the tip nozzle, enabling uniform cleaning treatment ■ By connecting a suction device, it is possible to simultaneously collect treated water and removed materials ■ Corner type - A cover specifically designed for corner areas prevents splashing during treatment *For more details, please refer to the PDF document or feel free to contact us.

• Other construction services

The "Aqua Cell Rotor" is a super high-pressure attachment that efficiently performs cleaning and stripping tasks on walls and flat surfaces by rotating the nozzle at high pressure due to the reaction force of the super high-pressure water jet. It has a rotation speed of 1700-2800 rpm and a suction inlet diameter of φ38mm. 【Features】 ■ The nozzle rotates at high pressure, efficiently performing cleaning and stripping tasks on walls and flat surfaces. *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Aqua Blast" is a super high-pressure attachment that allows for wide and even cleaning of walls and flat surfaces due to its jet pattern being flat. It can be used for applications such as roughening concrete surfaces, removing rubber and resin linings, preparing surfaces for coatings, rust removal, and paint stripping from steel surfaces. 【Features】 ■ Capable of wide and even cleaning of walls and flat surfaces ■ Usable for applications such as roughening concrete surfaces and removing rubber and resin linings *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Vacuum Jet 2500" is a cleaning unit that can simultaneously wash with high-pressure water and vacuum recover the treated water. It is suitable for road surface decontamination, white line and paint removal, and concrete grinding. We continue to develop and improve nozzles to meet the subtle finishing requirements for different targets, making it widely adopted for decontamination and various road surface improvements. 【Features】 ■ Uniform finishing surface Removal of paint surfaces can also be handled with simultaneous suction. ■ Splash prevention measures Since there is no splash from high-pressure water, adjacent work on shared lanes is possible. Wastewater from construction can also be recovered, preventing environmental pollution. ■ Quiet operation The noise from spraying is suppressed by the cover and suction function, achieving a quiet WJ site that is completely different from open types. ■ Adaptable to all environments Compatible with all types of scaffolding, including aerial work platforms, suspended scaffolding, and assembled scaffolding. Can accommodate all construction surfaces, including upward, sideways, and downward (Lizard Hand Jet). ■ Compatible with all target materials Suitable for all construction surfaces, including paving stones, concrete, and painting. We will also adapt the nozzle layout and travel assistance equipment according to the application! *For more details, please contact us or download the PDF.

• Renovation and repair methods

The "Lizard" can adhere to vertical walls and perform surface treatment and paint stripping using ultra-high-pressure water in a semi-automatic manner. By adjusting the pressure, water volume, and construction speed of the high-pressure water, it is possible to achieve appropriate paint film stripping and cleaning results according to the condition of the target object and its intended purpose. Additionally, the water used during the operation and the stripped materials are collected by connecting a hose to a shell with a suction function, which is then connected to a powerful suction vehicle to preserve the environment at the site. It demonstrates its effectiveness in stripping paint from the interior and exterior of crude oil tanks, as well as from the exterior of large vessels and in the renovation of factory floors. 【Features】 ■ Maximum operating pressure: 245Mpa ■ Usable in rainy weather or when surfaces are damp ■ Uses water, making it harmless with low noise and vibration ■ Simultaneous collection of stripped materials and treated water is possible We will also adapt the nozzle layout and travel assistance equipment according to your needs! *For more details, please contact us or download the PDF.

• Renovation and repair methods

The "Lizard Mini 2500" is an automatic wall painting stripping device that adheres vertically and can perform surface treatment and paint stripping using ultra-high-pressure water in a semi-automatic manner. It is effective for paint stripping of both the interior and exterior of crude oil tanks, exterior paint stripping of large ships, and renovations of factory floors. (*Magnetically adhered, applicable to magnetic surfaces) It allows for safe operation via remote control on vertical and overhanging walls, where manual work is difficult. 【Features】 ■ Adheres vertically and enables semi-automatic surface treatment and paint stripping using ultra-high-pressure water ■ Safe operation via remote control on vertical and overhanging walls, where manual work is difficult ■ Effective for paint stripping of crude oil tank interiors and exteriors, exterior of large ships, and factory floor renovations *For more details, please refer to the PDF document or feel free to contact us.

• Other construction services

The "Eco Jet Crusher 410A" is a new type of demolition robot specifically developed for concrete demolition using water jets. It is suitable for work in narrow areas and effectively processes concrete on horizontal, vertical, and ceiling surfaces. The demolition work is carried out automatically based on values inputted into the computer, and it can accommodate various shapes of demolition. 【Features】 - Adaptable for work in narrow areas - Effectively processes concrete on horizontal, vertical, and ceiling surfaces - Accommodates various shapes of demolition *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Eco Jet Drill Short" is a water jet drilling tool that allows for safe construction without damaging steel materials such as PC cables. It has a proven drilling length of up to approximately 800mm between beams. The length can be selected to match the beam spacing dimensions. Since it is a manual drilling method, it enables easy drilling. 【Features】 ■ Safe construction without damaging steel materials such as PC cables ■ Length can be selected to match beam spacing dimensions ■ Drilling diameter can be performed from φ40mm to φ250mm ■ Easy operation with manual control ■ Adoption of a splash prevention cover that allows simultaneous suction, minimizing splatter to the surroundings *For more details, please refer to the PDF materials or feel free to contact us.

• Other construction services

The "Eco Jet Traverser" is a super high-pressure attachment that rotates and sprays water at a maximum pressure of 245 MPa to perform concrete chipping. It features an aluminum structure in the frame, achieving significant weight reduction. 【Features】 ■ Aluminum structure in the frame for significant weight reduction ■ Rotating spray of super high-pressure water at 245 MPa *For more details, please refer to the PDF document or feel free to contact us.

• others

The water jet attachment "Eco Paint Remover 2500" sprays ultra-high pressure water at 245MPa (2500kgf/cm²) in a rotating manner onto the surface to cleanly strip away hardened paint. This product has a rotation speed of 1000rpm and an air consumption of 500L/min. 【Features】 ■ Rotating spray of ultra-high pressure water at 245MPa (2500kgf/cm²) onto the surface ■ Cleanly strips away hardened paint *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Gap Master 11" is a newly developed chipping unit specialized for concrete chipping using water jets in confined spaces. The thickness of the nozzle unit at the tip is only 103mm, making it suitable for work in narrow areas, effectively chipping the ceiling and underside concrete within confined spaces. With the auxiliary guide roller that can be easily installed in confined areas, it is possible to reduce manual chipping effort and improve work efficiency. 【Features】 ■ Specialized for concrete chipping using water jets in confined spaces ■ The thickness of the nozzle unit at the tip is only 103mm, ideal for work in narrow areas ■ The auxiliary guide roller, which can be easily installed in confined spaces, allows for reduced manual chipping effort and improved work efficiency *For more details, please refer to the PDF document or feel free to contact us.

• Other construction services

"WAS (Water Abrasive Suspension) Jet Cutting" is a cutting method that mixes ultra-high-pressure water and abrasive materials. It utilizes the cutting energy of ultra-high-pressure water and abrasive materials without loss, achieving high cutting capability. The nozzle shape is compact, making remote cutting easy, and it is a method that can be used in various locations. 【Features】 ■ A cutting method that mixes ultra-high-pressure water and abrasive materials ■ Excellent cutting capability that uses the cutting energy of ultra-high-pressure water and abrasive materials without loss ■ A compact nozzle shape that allows for easy remote cutting, making it suitable for various locations *For more details, please refer to the PDF document or feel free to contact us.

• Other construction services