日進機工 List of Products and Services

The abrasive water jet cutting method involves mixing a special abrasive with water and spraying it at ultra-high pressure to perform cutting! As a pioneer in water jet technology, we have developed cutting equipment and construction methods optimized for various sites and targets, achieving significant results! The pumps we partner with operate at pressures of 200 to 280 MPa. Our self-developed EcoMaster Magnum pump unit is equipped with an engine that complies with low exhaust gas regulations, achieving low noise levels of 75 dB, and is active in various scenes! Due to the minimal vibration generated against the target structure, construction can be carried out even near operating equipment.

• Special Construction Method

The "Water Jet Cutting Device (Chain Type)" is a cutting device that employs a chain-type traverse rail. It accommodates pipes of various sizes and is easy to install. By improving the compactness of the traveling part, it can also be used in narrow spaces (minimum gap of 180mm). 【Features】 ■ Adopts a chain-type traverse rail to accommodate pipes of various sizes ■ Easy to install ■ Compact improvement of the traveling part ■ Capable of construction in narrow spaces (minimum gap of 180mm) *For more details, please refer to the PDF document or feel free to contact us.

• Other construction services

The "Eco Jet Borer" is a device that rotates and injects ultra-high-pressure water to drill into concrete using that energy. The water used during the operation and the debris are collected by connecting a hose to a shell with a suction function, which is then connected to a powerful suction vehicle, preserving the environment at the site. 【Features】 ■ Capable of drilling diameters from 30mm to 100mm - The drilling diameter is determined by the total length of the hole and discharge conditions. ■ Uniform finished surface ■ Measures to prevent scattering - Since there is no scattering of high-pressure water, adjacent work on operating equipment and roads is possible. - Construction wastewater can also be collected, preventing environmental pollution. ■ Adaptable to various environments - Compatible with aerial work platforms, assembly scaffolding, etc. - Suitable for upward and sideways construction surfaces. ■ Can drill without damaging rebar - An effective construction method even when existing rebar cannot be confirmed. We will also adapt the nozzle layout and auxiliary equipment according to the application! *For more details, please contact us or download the PDF.

• Renovation and repair methods

At Nisshin Kiko, we can offer a variety of proposals to effectively utilize land and space. Please feel free to contact us first. Our style is "Manufacturer & Trading Company." In addition to manufacturing and selling equipment, we provide safe and reliable services by leveraging the maintenance technology cultivated through plant maintenance. Please contact Nisshin Kiko Headquarters, Ohno or Inagaki. Phone: 052-739-2779 (Direct Dial) Fax: 052-739-2673

• Car and bicycle parking facilities

The "AUTOMOBILE TOWER DISPLAY" is an original three-dimensional vehicle display device that plays a role in promoting car sales. It has recently been adopted at the new car sales store of LEXUS Todoroki. Taking this opportunity, we are currently holding free consultation sessions conducted by the product development team. We will answer various questions regarding costs and the effects after installation. Visits nationwide are also possible. Please feel free to contact us. 【Features】 ■ Eye-catching tower-type display with a strong presence ■ Attractively illuminates vehicles at night ■ Comprehensive support from design and construction to lighting design ■ Experience with round-type installations as well *For details on the free consultation sessions, please refer to the materials. A collection of construction photos is also available for download.

• Showcase

Thanks to the positive feedback from users who have adopted our product, we had developer interview articles published in the Nikkan Jidosha Shimbun on October 30, 2010, and in the May issue of Shoten Kenchiku in April 2013. We would like to express our gratitude to the users who provided photographs and cooperation for the interviews. In order to realize projects aimed at the development of dealers and the expansion of regional markets, we are continuously working on product improvements, on-site enhancements, and the planning and development of new products. Moving forward, together with dealer companies and store designers, we will strive to create originality, and the entire development group will continue to refine our skills. For inquiries regarding this product, please contact: Nisshin Kiko Headquarters, Ohno or Inagaki. Phone: 052-739-2779, Extension 344

• Car and bicycle parking facilities

Our company specializes in the design and construction of the "Three-Dimensional Vehicle Display Device ATD," characterized by its collection box-like appearance. As a first-class architectural design firm, we actively undertake design projects and have developed a presentation system that links the delivery room and tower, which has received great acclaim for its significant differentiation from other companies. We are applying to be a ZEB (Net Zero Energy Building) planner and are promoting environmentally conscious design practices.

• Other commercial buildings and service facilities

Our company specializes in the design and construction of the "Three-Dimensional Vehicle Display Device ATD," characterized by its collection box-like appearance. We ensure high safety with a robust structure and can design various types according to budget and requirements, including a four-layer type that can display up to eight vehicles and a five-layer built-in type on one side. Leveraging over 50 years of extensive experience in plant maintenance, we can provide proposals from the planning stage on how to showcase vehicles, their arrangement, and how to utilize them as a service. 【Features】 ■ Eye-catching tower-type display ■ Attractive vehicle lighting at night ■ Comprehensive support for design, construction, and lighting design ■ Experience with round-type installations *You can view the construction photo collection from the "PDF Download."

• Car and bicycle parking facilities

The blast device, which is mocked as a self-harming device. When the components of the abrasive circulation path wear out, it can no longer demonstrate its original capabilities, leading to a decline in quality. Therefore, what we propose is, "From reactive maintenance to preventive maintenance!" We will ensure reliable maintenance, securing high quality and creating a safe working environment!

• maintenance

Peening means to strike with the hemispherical head of a hammer. It is a processing method that improves hardness and imparts compressive residual stress by striking the surface of metal materials with countless round (spherical) shot materials at high speed. Additionally, as the shot materials collide, the surface of the metal materials takes on a rounded dimpled shape, which enhances lubricity and wear resistance! We offer proposals for equipment sales, on-site construction, contract processing, and more!

• others

Pioneers of water jet technology, Nisshin Kiko. However, there are many sites and materials where water cannot be used. That's where "blast" comes into play. It is a safe and environmentally friendly processing method that does not use chemicals. We design, develop, and sell equipment tailored to our customers' needs, provide on-site construction, and offer contract processing through work custody, among other services. Please feel free to contact us!

• others

Introducing the touchless ultrasonic cleaning machines 'WTC-600-40/WTC-1200-40' handled by Nisshin Kiko Co., Ltd. Equipped with photoelectric sensors and voice guidance in the control panel, it allows for easy operation without touching the switches with wet or dirty hands, following the voice instructions. It provides stable cleaning that is less affected by variations in liquid type and liquid depth. 【Features】 ■ Utilizes photoelectric sensors and voice guidance in the control panel ■ Can start and stop without contact ■ Easy operation following voice guidance ■ Available in two models: 600W and 1200W ■ Provides stable cleaning that is less affected by variations in liquid type and liquid depth *For more details, please refer to the PDF document or feel free to contact us.

• others

The materials and shapes of the items to be cleaned vary. We consider cleaning quality, takt time, installation space, the configuration of surrounding equipment, and the purification of cleaning solutions necessary for maintaining quality. We design and manufacture cleaning equipment tailored to our customers' needs. Utilizing our extensive experience and technology in industrial maintenance through water jet methods, we provide equipment that suits our customers. Please leave the aftercare to us! *For more details, please refer to the PDF document or feel free to contact us.

• others

The condition of the factory varies. In addition to solving the current issues we face, it is necessary to have plans that look toward the future. We will provide the "joy" of painting in a visible form and deliver quality, safety, and effectiveness that will inspire emotion. *For more details, please refer to the PDF document or feel free to contact us.

• paint

On the special site, you can also download a catalog introducing structural and construction examples! (Click on the "Catalog List" in the special section!) This is a dedicated heat-insulating sheet specifically designed for corrugated metal roofs. Great news for facility managers who have recently replaced their roofs but are struggling with heat energy intrusion and winter condensation. We are increasing our construction achievements thanks to positive feedback from early adopters. Sawayaka's "Cool Roof" has been featured in the Japanese edition of Newsweek (December 7, 2011)!

• Heat shielding sheet

Filtration mat: Leave it to Nisshin Kiko Co., Ltd. for high-precision self-cleaning water filtration filters.

• Sanitary fixtures

We propose cost-effective improvements to the working environment during the summer. By installing an intake fan to introduce outside air, we efficiently expel the heat that accumulates in the factory to the outdoors. Introducing outside air directly into the work area lowers the perceived temperature through airflow and maintains positive pressure within the factory, preventing the intrusion of insects and dust. Using dry mist in conjunction will be even more effective. *For more details, please refer to the PDF document or feel free to contact us.

• Air conditioning equipment

Overall air conditioning and localized air conditioning associated with new construction and expansion CO2 reduction measures and updates of old equipment due to aging We will make various proposals considering the factory layout. Prioritizing worker comfort and energy-saving effects, we will efficiently air condition the work area with our unique airflow control. We can handle various manufacturers and provide an optimal working environment. *For more details, please refer to the PDF materials or feel free to contact us.

• Heating and cooling equipment and facilities

Our company handles a variety of production equipment and devices, including conveyors, cleaning machines, drying ovens, processing machines, welding machines, and appearance inspection machines. We can provide proposals tailored to our customers' challenges, budgets, and delivery times, and we not only sell products from various manufacturers but also design and manufacture custom machines. We also offer installation and maintenance services after implementation. 【Examples of handled equipment and devices】 Cleaning machines, drying machines, deburring machines, cutting machines, welding machines, pressing machines, shot blasting equipment, conveyors, and various inspection machines. *For more details, please refer to the PDF materials. Feel free to contact us with any inquiries.

• others

Our company builds a consistent production system from design to installation tailored to our customers' needs. Leveraging our extensive experience, we continuously aim to improve productivity as a technology development and factory equipment consultant. We set high goals and engage in the automation of production equipment and the modification and maintenance of industrial machinery. We consistently accept orders and propose solutions for cost reduction and addressing labor shortages. 【Business Content】 ■ Labor-saving concepts and VE machine design ■ Consistent industrial machinery production ■ FA systemization utilizing extensive experience ■ Traceability of production lines 【Features】 ❑ We can start from machine modifications ❑ Quick response ❑ ONE TEAM of design, machinery, and electrical engineering ❑ Prototype testing possible before design *For more details, please download the catalog or feel free to contact us.

• others