Calculation software Product List and Ranking from 75 Manufacturers, Suppliers and Companies

[Case Study] Electromechanical Coupling Analysis of Cylindrical Piezoelectric Elements

Focusing on the conversion from force to electricity! The software is PHOTO-ELAS and PHOTO-VOLT.

A piezoelectric material is a dielectric that converts mechanical force into electricity or electricity into mechanical force. In this case, a force is applied to the upper surface of a cylindrical piezoelectric material, and the resulting voltage is analyzed. Since the equations related to "force" and "electricity" are different, these equations are coupled to analyze the piezoelectric element. Therefore, a coupled analysis of stress and electric field was conducted. The software used for stress analysis and electric field analysis is PHOTO-ELAS and PHOTO-VOLT, respectively. 【Case Overview】 ■ Software Used: PHOTO-ELAS and PHOTO-VOLT ■ Analysis Conditions - Relative Permittivity: 2000 - Young's Modulus: 5×10^10 - Poisson's Ratio: 0.35 - Analysis Modules: VOLT & ELAS *For more details, please refer to the related links or feel free to contact us.

Company：フォトン
Price：Other

Other services and technologies
Calculation software

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Catchment basin structural calculation system

Horizontal stress analysis" • "Three-edge fixed slab method" • Calculation system for catch basin structures using "both ends fixed + three-edge fixed plate

It is possible to perform stability calculations for the constant and seismic conditions of reinforced and unreinforced concrete catch basins, as well as stress checks for all 12 sections of the bottom slab and side walls. In the seismic analysis, considerations for "dynamic water pressure" and "inertial forces due to self-weight" can be included. The analysis of the side walls can be selected from "horizontal stress analysis," "three-edge fixed slab method," and "fixed beam at both ends + three-edge fixed slab." Additionally, up to six combinations of load cases are possible. Output reports can be previewed for content verification, and Word output is also available.

Company：ＳＩＰシステム大阪事務所
Price：100,000 yen-500,000 yen

Civil Engineering Company
Consulting companies
Calculation software

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Piping structure calculation system

It is possible to examine the horizontal direction of both pressure pipes and non-pressure pipes in accordance with the standards for land improvement "pipeline," "sewer," and "water supply," both under normal conditions and during earthquakes.

We will conduct structural calculations for "ductile pipes" and "non-ductile pipes" in the transverse direction, in accordance with land improvement "pipeline," "sewer standards," and "water supply standards," for both normal conditions and during earthquakes (Level 1.2). Pipe type data is registered in the database and additional registrations are possible. The cross-sectional shapes correspond to "trough type," "protruding type," "reverse protruding type," "sheet pile construction," and "simple earth retaining work." By inputting the burial depth and calculation pitch, bulk cross-sectional registration is also possible. Calculation reports can include table of contents creation, detailed printing for each cross-section, and Word output.

Company：ＳＩＰシステム大阪事務所
Price：100,000 yen-500,000 yen

Civil Engineering Company
Consulting companies
Surveying Consulting
Calculation software

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Payroll Calculation Software - Salary via Email

Internet-based payroll outsourcing system

Indeed, an IT revolution! The salaries of 100 people can be processed in just a few minutes. There is no need for dedicated servers or other equipment investments. A simple internet connection is sufficient. Our payroll outsourcing system is equipped with various features protected by unique security measures.

Company：シスプラ
Price：Other

Accounting Management System
others
Calculation software

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wooden Building Structural Calculation Software KIZUKURI

This is software for structural calculations of wooden parts in wooden buildings and mixed-structure buildings up to three stories using frame construction methods.

"KIZUKURI" not only performs structural calculations but also supports the output of examination results necessary for applications such as structural calculation documents required during the confirmation application process, as well as compliance documents for long-term excellent housing and Flat 35, including seismic grade 3. ■ Applications supported by "KIZUKURI" - Building confirmation application - Housing performance display disaster - Long-term excellent housing - Flat 35 - Housing performance certification - Structural calculation documents for seismic grades 1, 2, and 3 required for other subsidy projects

Company：コンピュータシステム研究所
Price：Other

Architectural Design Software
Calculation software

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

M-φ calculation of concrete cross-section 'JIP-TOOLS-1'

Calculating the bending moment and curvature of the concrete cross-section.

The M-φ calculation for concrete cross-sections in "JIP-TOOLS-1" calculates the bending moment and curvature of concrete cross-sections based on the Road Bridge Design Guidelines and their Commentary I Common Edition, III Concrete and Concrete Member Edition, and V Seismic Design Edition (November 2017). It allows for the easy calculation of M-φ for arbitrary cross-sections by freely combining rectangular, circular, and polygonal shapes. Reinforcement and PC steel can be arranged freely. Additionally, the created combination shapes can be rotated freely, and the principal axis can be set in any direction. It is also an effective tool for checking the seismic performance of curved girders. For more details, please download the catalog. *The catalog is available from the "Urban Development Database Site" (https://kensetsu.ipros.jp/product/detail/2000095764).

Company：JIPテクノサイエンス
Price：Other

Steel
Other Software
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wall Quantity N Value Calculation Software Pochitto Wall Quantity

"Pochitto Wall Quantity" was born as a renewed version of "Structural Checker Wall Quantity Edition," and is a "Wall Quantity N-value Calculation Software" that complies with housing performance labeling. 【Features】 ○ You can calculate the necessary values for confirmation applications and performance evaluation applications with the push of a button. ○ The calculated values can be output in an easy-to-read format as required documents. ● For other functions and details, please contact us.

Company：SHF
Price：Other

Distance measuring device/length measuring device
Calculation software

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wall-type integrated structural calculation software 'Super Build/WRC'

A comprehensive structural calculation software (program) that performs allowable stress calculations for wall-type reinforced concrete buildings to capacity calculations for horizontal resistance. It complies with the Ministry of Land, Infrastructure, Transport and Tourism Notification No. 1026 of 2001, and by selecting calculation conditions, it can perform calculations in accordance with the "Design Standards and Commentary for Wall-Type Reinforced Concrete Structures (Architectural Institute of Japan)" or the "Design and Construction Guidelines for Wall-Type Reinforced Concrete Structures." ● For other functions and details, please contact us.

Company：ユニオンシステム
Price：Other

Scientific Calculation and Simulation Software
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Architectural Structural Calculation Software Comprehensive Catalog

You can view a list of architectural structural calculation software.

Super Build & SS21 Comprehensive Catalog. It includes various software such as the integrated structural calculation software 'Super Build/SS7', the wall-type integrated structural calculation software 'Super Build/WRC', the seismic diagnosis software 'Super Build/RC Diagnosis', the elasto-plastic seismic response analysis software 'SS21/DynamicPRO', and the seismic isolation device layout planning software 'SS21/IsolationPRO', among many others. Currently, the comprehensive catalog is being distributed for free! For more details, please contact us or refer to the catalog.

Company：ユニオンシステム
Price：Other

Scientific Calculation and Simulation Software
Other Software
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Seismic Isolation Device Layout Planning Software 'IsolationPRO'

Seismic Isolation Device Layout Planning Software 'SS21/IsolationPRO'

"SS21/IsolationPRO" is software (program) that supports the planning of the arrangement of seismic isolation devices in seismic-isolated buildings. It performs structural calculations related to the isolation layer in accordance with the "Technical Standards Necessary for Safety Regarding Structural Methods of Seismic Isolation Buildings" (Ministry of Construction Notification No. 2009 of 2000, amended by Ministry of Land, Infrastructure, Transport and Tourism Notification No. 1160 of 2004). For more details, please contact us or download the catalog.

Company：ユニオンシステム
Price：Other

Other measuring instruments
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Basic Design Support Option 'Super Build / BF1 Op.'

This is an optional software for "BF1" that allows you to add basic design functions.

This is an optional software for 'Super Build/BF1', which performs various calculations related to the design of pile foundations and shallow foundations. "Op.1" allows for the calculation of settlement considering the influence of adjacent foundations and the rigidity of foundation beams based on calculation conditions. "Op.2" calculates the bending resistance of piles from axial forces at ultimate limit state and determines the ultimate resistance of piles based on conditions such as ground constants. "Op.3" enables the calculation of bearing capacity for strip foundations and mat foundations, as well as the cross-section determination of footings (foundation slabs). 【Features】 ○Super Build/BF1 Op.1 → Calculation of settlement for shallow foundations (independent), quantity calculation for piles and foundations ○Super Build/BF1 Op.2 → Calculation of pile bearing capacity using Broms' method ○Super Build/BF1 Op.3 → Calculation of bearing capacity for strip foundations and mat foundations For more details, please contact us or download the catalog.

Company：ユニオンシステム
Price：Other

Concrete sheet piles and piles
Other Software
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DynamicPRO D-Tri Model Additional Options

Added to the lineup of the Degrading Tri-Linear model: "DynamicPRO D-Tri model additional option."

The "SS21/DynamicPRO D-Tri Model Additional Options" is an optional software (program) for "SS21/DynamicPRO" that adds the Degrading Tri-Linear model to the lineup. ● For more details, please contact us or download the catalog.

Company：ユニオンシステム
Price：Other

Other Software
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

A case study collection of structural calculation software featuring feedback from over 80 customers.

Free download of case studies for design offices and universities! Easy-to-use structural calculation software!

We are currently offering a free booklet titled "Customer Voices," which includes feedback from over 80 users of Union System's structural calculation software! Union System's "Super Build" and "SS21" series are structural calculation software widely used by many structural designers! [Contents] ◎ Usage and solution examples from K Design Office ◎ Usage and solution examples from I Research Institute ◎ Usage and solution examples from A University [For more details, please download the catalog or feel free to contact us]

Company：ユニオンシステム
Price：Other

Other Software
Calculation software

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Consistent structural calculation software 'Super Build/SS7'

"Super Build/SS7," a comprehensive structural calculation software that pursues labor-saving in structural design.

"Super Build/SS7" is a comprehensive structural calculation software that pursues labor-saving in structural design. It is equipped with numerous new features that reflect user requests, such as "jumping to relevant items from result messages," "color display of NG results," "the ability to save up to five calculation results for a single project," and "changing the color of members with input errors," thereby achieving labor-saving in structural design. *For more details, please contact us or download the catalog to view.

Company：ユニオンシステム
Price：Other

Architectural Design Software
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Consistent structural calculation software 'SS7 Premium'

A new integrated structural calculation software 'Super Build/SS7 Premium' that realizes diversity in structural design.

"Super Build/SS7 Premium" is a comprehensive structural calculation software that incorporates the diversity of structural design. By further evolving "SS7" to meet the demands of realistic structural design, we support the future of structural design work. If you wish to conduct your design work more efficiently or require more detailed structural calculations, please make use of the Premium features. *For more details, please contact us or download the catalog to view it.

Company：ユニオンシステム
Price：Other

Architectural Design Software
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example │ Wooden 3-Story House

A three-story wooden frame house! An example of direct foundation with ground improvement using steel pipe piles.

We would like to introduce a case study of the structural calculation software "Super Build/SS7" for residential buildings. In this project, the emphasis was placed on achieving an elegant form and openness in the interior rather than structural rationality, resulting in different configurations and stress conditions at each joint. As a result, various joint types were employed, including traditional joints, metal fittings, glued-in rod methods, and one-sided shear joints using fabricated metal components, all chosen appropriately for their respective locations. The foundation is a direct foundation with ground improvement using steel pipe piles. 【Case Overview】 ■ Use: Residential ■ Structural Type: Wooden ■ Number of Floors: 3 ■ Design: Tokyo *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example │ S-Type 2-Story J-League Soccer Clubhouse

The large roof features a design that overlaps with the ridge line of Mount Akagi!

We would like to introduce an example of the structural calculation software "Super Build/SS7" used for the J-League soccer club house. This building was planned as a base for the activities of the J-League soccer club "Thespakusatsu Gunma," and aims to serve as a facility that promotes health, not only for sports and soccer but also as an open community space. Due to its location at the gentle foothills directly south of Mount Akagi, the large roof features a design that aligns with the ridge line of Mount Akagi. 【Example Overview】 ■ Purpose: J-League Soccer Club House ■ Structural Type: Steel Structure ■ Number of Floors: 2 ■ Design: M.E.M. Architectural Firm (Tokyo) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example │ Steel Structure One-Story Factory

By reducing the number of foundation beams and piles, we achieve construction with a shorter construction period and lower costs!

We would like to introduce a case study of the integrated structural calculation software "Super Build/SS7" for a steel frame, single-story factory with a single slope. The dimensions are as follows: X direction = 25.2m, Y direction = 15.0m, height = 8.3m. The structure features a rigid frame in the Y direction and a brace frame in the X direction, with two 2.8t overhead cranes installed. For the foundation, we adopted JFE Civil Corporation's "Ichii-ichi Foundation Method," which integrates columns and a single pile, reducing the number of foundation beams and piles, thereby achieving a shorter construction period and lower costs. 【Case Overview】 ■ Purpose: Factory ■ Structural Type: Steel Structure ■ Number of Floors: 1 ■ Design: Yoshino Design Co., Ltd. (Hiroshima Prefecture) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Examples | Steel Structure + Reinforced Concrete Structure + Steel Reinforced Concrete Structure Viewing Areas and Sports Facilities

An example of an indoor pool facility equipped with a 25m pool, a 50m pool, and a 10m diving pool!

We would like to introduce an example of the integrated structural calculation software "Super Build/SS7" for spectator venues and sports facilities. The overall floor plan of the building measures approximately 70m × 120m, with a column-free space utilizing a system truss extending about 63m × 92m. It features approximately 2,500 spectator seats, making it suitable for large-scale competitions. This facility is available for use by the general public and is also equipped to serve as a venue for national sports competitions. 【Example Overview】 ■ Purpose: Spectator venue and sports facility ■ Structural Type: Steel structure + Reinforced concrete structure + Steel-reinforced concrete structure ■ Levels: 3 stories above ground, 1 basement level ■ Design: Baron Architects Co., Ltd. (Gunma Prefecture) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example │ S-Type 2-Story Building with PH 2nd Floor Store

An example of a two-story steel-framed store engaged in retail sales to be built in Gifu Prefecture!

We would like to introduce a case study of the consistent structural calculation software "Super Build/SS7" for stores. The building dimensions are 35m in the X direction, 62m in the Y direction, with a maximum height of 17.43m and a total floor area of approximately 3900m². A distinctive feature is the PH level, which is designed to be integrated with the building for use as a equipment storage area and advertising tower on the rooftop. 【Case Overview】 ■ Purpose: Certain Store ■ Structural Type: Steel Structure ■ Levels: 2 floors above ground, 2 floors PH ■ Design: Toj Engineering Co., Ltd. (Osaka Prefecture) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example | RC Construction 8-Story Above Ground, 1-Story Below Ground Apartment Building

The entrance featuring simple twin towers facing the road and the circular floor plan zone at the back of the site are the highlights!

We would like to introduce an example of the consistent structural calculation software "Super Build/SS7" for a multi-family residential building. This building is a reinforced concrete structure with 8 stories above ground and 1 basement level, reaching a height of 26.3 meters. The building's floor plan features a simple rectangular entrance with two blocks and a horseshoe shape with an arc-shaped volume at the back of the site. 【Example Overview】 ■ Use: Multi-family residential ■ Structural type: Reinforced concrete ■ Levels: 8 stories above ground, 1 basement ■ Design: Structural design office (Tokyo) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example | 18-Story RC Hotel

Confirmation of hinge generation is visualized! It has become easier to verify analysis results across multiple models, leading to time savings in practice.

We would like to introduce an example of the consistent structural calculation software "Super Build/SS7" for hotels. This building is the eastern wing of a hotel complex (west wing, east wing, parking structure) planned in Okinawa Prefecture. The first floor is a restaurant, floors 1 to 17 are for accommodation (hotel), and the 18th floor features a large public bath. It is an 18-story building with a height of 59.8 meters. Construction is currently underway, with completion scheduled for the end of 2025. 【Example Overview】 ■ Use: Hotel ■ Structural Type: Reinforced Concrete ■ Stories: 18 ■ Design: Shige Architecture Structural Design Office (Osaka Prefecture) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example | S-Type 2-Story Warehouse

The structural form is a pure frame structure in both the X and Y directions! Designed to ensure reliable building support capacity.

We would like to introduce an example of the structural calculation software 'Super Build/SS7' for S steel warehouses. This building is a two-story steel structure used as a warehouse, with a plan size of 82 meters on the long side and 32 meters on the short side. Modeling and structural calculations were performed for the main structural framework, which was utilized for member design. Additionally, the calculation output function allowed for the creation of calculation documents related to the main framework, all done using this product. 【Example Overview】 ■ Use: Warehouse ■ Structural Type: Steel ■ Number of Stories: 2 ■ Design: Nose Architectural Structure Laboratory Co., Ltd. (Osaka Prefecture) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example | SRC Construction, 9 Stories Above Ground, 1 Basement Floor Office Building

The purpose is to examine the strength of existing buildings! Introduction of completed case studies using cross-section calculation functions.

We would like to introduce a case study of the consistent structural calculation software 'Super Build/SS7' for SRC construction offices. In this project, we examined the structural strength of a 9-story above ground and 1-story below ground SRC building during its demolition, which was carried out using demolition machinery from the upper floors. The aim was to select the appropriate machinery that fits within the structural strength limits while varying the load capacity of the demolition machinery, as well as to plan the placement of slab reinforcement supports during this process. 【Case Study Overview】 ■ Purpose: Office (Demolition Work) ■ Structural Type: SRC Construction ■ Levels: 9 stories above ground, 1 story below ground ■ Design: Wyatt Architectural Planning (Tokyo) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example │ S-Structure + RC Structure 4-Story Mixed-Use Commercial Facility

An example of planning as an integrated structure! The floor plan and elevation are complex buildings that also serve as a mixed-use facility.

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' for a four-story mixed-use commercial facility constructed with steel (S) and reinforced concrete (RC). This building is planned to include multiple retail units (SF2 triangular dry roof), an office building (SF4 octagonal frame dry roof), a parking structure (SF4 self-parking roof solar equipment frame dry roof), and an RC studio building (RCF2 inner child method). The project is designed with structural spans of 28 meters in the X direction, 33 meters in the Y direction, and 17 layers in height, allowing for the entire building to be modeled by incorporating dummy layers and numerous passages. 【Case Study Overview】 ■ Use: Mixed-use commercial facility ■ Structural Type: Steel (S) + Reinforced Concrete (RC) (Inner child method: both upper and lower structures are S with Exp.J) ■ Levels: 4 stories ■ Design: Terui Structural Office (Hiroshima Prefecture) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example │ Steel Structure One-Story Warehouse and Factory

The superstructure is a system architecture, and this is an introduction to examples that only deal with foundation design!

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' for an S-shaped warehouse and factory. The warehouse and factory is a single-story steel frame building, with 18 spans in the X direction and 3 spans in the Y direction. The superstructure is a system building, and we only handled the foundation design. The upper stress calculated using a different system building-specific software was temporarily saved in Excel, edited to match the cell configuration for special loads (sheet input) for stress calculations, and then pasted using copy and paste. 【Case Study Overview】 ■ Purpose: Certain warehouse and factory ■ Structural Type: Steel structure ■ Number of Floors: 1 ■ Design: Mori Structural Design Co., Ltd. (Miyagi Prefecture) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example | 5-Story Steel Building Factory

Here is an example where input and analysis were carried out smoothly without the need for any modeling!

We would like to introduce an example of the integrated structural calculation software 'Super Build/SS7' for a 5-story steel structure factory. In a new construction project for an electrical equipment manufacturing factory, there is a 3-story steel frame building with a penthouse, featuring a large atrium on the second floor, as well as an atrium that extends from the first to the third floor for an automated warehouse. The building has a direct foundation. At the front, there are canopies at different levels of 10m and 6m, and on the first floor, there is a lower roof with varying ceiling heights, which allowed us to utilize the function for specifying dummy layers. 【Example Overview】 ■ Purpose: Factory ■ Structural Type: Steel Structure ■ Number of Floors: 5 ■ Design: Kawai Architectural Design Office (Osaka Prefecture) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example | Steel Structure 1-Story Commercial Facility

A commercial facility consisting of three independent buildings! The large roof side is set as a dummy layer, subordinating it to the main body for analysis.

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' for a single-story commercial facility made of steel (S construction). All three buildings are planned as steel structures, adopting a pure moment-resisting frame to allow for flexibility and adaptability in the interior space. Building B is designed as an indoor play facility, featuring a large open space with a single span. To accommodate the large roof at different levels associated with Building B, we set the roof side as a dummy layer and conducted the analysis by subordinating it to the main structure. 【Case Study Overview】 ■ Use: Commercial facility ■ Structural Type: Steel construction (S construction) ■ Levels: 1 floor ■ Design: JSD Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example | 13-Story RC Hotel

Introduction of a structural plan that supports the upper seismic wall with a 500mm thick arch wall on the first floor.

We would like to introduce an example of the integrated structural calculation software 'Super Build/SS7' for a 13-story hotel constructed with reinforced concrete (PRC). The second floor and above are planned with either two guest rooms per floor or one room, while the first floor is designed as an entrance hall with a space for light snacks, creating an open and spacious environment. By incorporating a dummy layer on the first floor and unifying nodes, we modeled diagonal members to achieve the intended design. 【Example Overview】 ■ Purpose: Hotel ■ Structural Type: Reinforced Concrete (PRC) ■ Number of Floors: 13 ■ Design: JSD Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example │ 4-Story Elementary School Building with Steel and Reinforced Concrete Construction

Using dummy layers, node unification, node movement, etc.! Model almost as it is in reality and design with consistent calculations.

We would like to introduce an example of the integrated structural calculation software 'Super Build/SS7' for a four-story elementary school building made of steel and reinforced concrete. This is a reconstruction plan for an elementary school building located along the Sai River in Kanazawa City, Ishikawa Prefecture, featuring an RC structure with a swimming pool on the roof in a heavy snowfall area. The U-shaped floor plan is designed to avoid the existing gymnasium and takes into account the impact of rain and snow on the building throughout the year in the Hokuriku climate. The floor plan is structured to avoid structural division of the building through expansion. [Example Overview] - Purpose: Elementary school building - Structural Type: Steel and reinforced concrete - Number of Floors: 4 - Design: bananaLab (Kyoto Prefecture) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software
Calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Calculation software Product List and Ranking from 75 Manufacturers, Suppliers and Companies | IPROS

Calculation software Manufacturer, Suppliers and Company Rankings

Calculation software Product ranking