更新日： 集計期間:Aug 12, 2026～Sep 08, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日： 集計期間:Aug 12, 2026～Sep 08, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日： 集計期間:Aug 12, 2026～Sep 08, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
511～540 件を表示 ／ 全 1202 件
System fixtures can store long materials, veneer, and building materials at a low cost.
Since there are no support pillars in front of where the materials are placed, it allows for the storage of long items such as lumber, building materials, and veneer. It is also widely used in home centers and can be used for display purposes as well.
A rack that can be taken out when in use and stored away, suitable for drying painted wood, sorting wood building materials, picking, displaying, and as a drying rack for wooden products.
The feature of this rack is that it can widen the spacing between the supports during use and can be compactly stored when not in use. A cantilever rack (bar rack) was needed to set the support spacing for each type of load, but the STRETCH series rack can accommodate various sizes of loads by adjusting the spacing between the columns. Additionally, it can be compactly stored when not in use, making it easy to find a storage space for the rack itself.
The STRETCH series rack can accommodate various sizes of loads by extending and contracting the space between the columns.
Point: A cantilever rack (bar rack, slide bar rack) with set spacing between supports for each type of load was necessary, but the STRETCH series rack can accommodate various sizes of loads by adjusting the spacing between the columns. Additionally, when not in use, it can be stored compactly, so there is no issue with finding storage space for the rack itself.
We propose products for professionals dealing with processing and painting. We offer high-quality items suitable for painting and processing applications, tailored to specific uses, to support productivity improvement.
The feature is that the spacing between the columns can be freely adjusted. It can expand the column spacing from a minimum width of 600 mm to a maximum width of 1250 + 1250 mm. In conventional products, a rack with a fixed column spacing was required for each type of load, but the STRETCH series rack can adjust the spacing to match the load by extending or contracting the columns. Additionally, when stored, the ability to adjust the size means there is no trouble finding a storage space for the rack itself.
A slide bar rack ideal for sorting architectural hardware and long-length hardware by residence.
The feature is that the spacing between the columns can be freely adjusted. The spacing can be expanded from a minimum width of 450 mm to a maximum width of 2660 mm. In conventional products, a rack with fixed column spacing was required for each type of load, but the STRETCH series rack allows for the spacing to be adjusted to match the load. Additionally, when stored, the ability to adjust the size means that there is no issue with finding storage space for the rack itself.
Two tiers with one unit! Space-saving three-dimensional storage perfected.
"Reverse Nestainer" - A three-dimensional storage rack that achieves space-saving and efficiency improvement The "Reverse Nestainer," which maximizes storage efficiency in warehouses and logistics sites, is an innovative storage rack that allows for two-tier vertical storage with a single unit. Unlike conventional nestainers, it is equipped with two types of stacking pins, one facing up and one facing down, enabling flexible stacking. This allows for optimal utilization of storage space. Features of the Reverse Nestainer Space-saving with three-dimensional storage It can stack two tiers with one unit, effectively utilizing limited space. Flexible stacking with two types of pins Standard equipped with upward and downward pins, allowing for usage according to needs. Smooth loading and unloading compatible with hand lifts The bottom tier allows for loading and unloading with a hand lift, improving work efficiency. Durable structural design With high-quality materials and robust design, it ensures reliability even with long-term use. The "Reverse Nestainer" balances space-saving and flexible operation while improving work efficiency in warehouse and logistics environments. It is highly recommended for those seeking a more comfortable and efficient storage system!
Over 120,000 copies sold! Introducing a tape that is perfect for sanding applications and once you get used to it, you won't want to stop using it.
The "Customizable Spacing Tape" is a tape that allows you to freely specify the printing interval for evenly spaced printing. Since it is printed at equal intervals, it eliminates misalignment and improves the accuracy of on-site construction. By determining the position in advance, tasks can be divided, enhancing work efficiency. Additionally, since marks are made beforehand, there is no need for reapplication. 【Features】 ■ The text is easy to read even when applied to black base materials ■ Printing intervals can be freely specified ■ Improved accuracy in on-site construction ■ Enhanced work efficiency ■ Elimination of reapplication *For more details, please refer to the PDF document or feel free to contact us.
![[Case Study] Buzan Logistics Solutions Co., Ltd.](https://image.www.ipros.com/public/product/image/eee/2001007810/IPROS80753281733850722506.png?w=280&h=280)
Introducing a high-density pallet storage system to the national distribution core center!
To the Saitama Second Center of Bussan Logistics Solutions Co., Ltd., we would like to introduce a case study of the logistics system we implemented. The company introduced a high-density pallet storage system as a solution to the issue of high inventory levels, allowing for the maximization of storage capacity and the efficiency of inbound and outbound operations. With the aim of maximizing storage capacity, the layout was efficiently arranged within the area, resulting in an approximately 1.5 times increase in storage capacity. [Case Overview] ■ Reason for Implementation - To achieve a more advanced logistics service as a core center - To balance the maximization of storage capacity with the efficiency of inbound and outbound operations ■ Results - Storage capacity increased by approximately 1.5 times - Improved efficiency of inbound and outbound operations and enhanced quality control *The information in this article is based on data available at the time of the interview. *For more details, please refer to the PDF document or feel free to contact us.
![[Case Study] Showa Kasei Industry Takumi Factory](https://image.www.ipros.com/public/product/image/39d/2001215439/IPROS67294497559396220838.jpeg?w=280&h=280)
Introducing a case study of implementing a pallet flow rack that allows for first-in, first-out storage for temporary storage!
We would like to introduce a case study of the logistics system implemented at Showa Kasei Kogyo's Factory Takumi. As storage equipment for the newly established "Factory Takumi," we have introduced a "pallet flow rack" that allows for automatic first-in, first-out operations and a "heavy-duty electric mobile rack" that enables high-density storage. We are working to improve the efficiency of raw material storage and temporary buffer storage before product shipment. [Case Overview] - Introduction of a "pallet flow rack" for automatic first-in, first-out operations and a "heavy-duty electric mobile rack" for high-density storage. - Introduction of advanced manufacturing equipment such as an automatic weighing system. *For more details, please refer to the related links or feel free to contact us.
We will design according to your company's operations and requests at a low price!
We will design based on your requirements for AGV specifications, layout, operation, and budget. Please also consult us about services such as assembly, installation, and post-processing (pickup of packaging materials, etc.), in addition to delivery.
Storage of items up to 2000 kg per section!
Weight racks (medium-duty shelves and heavy-duty shelves) and pallet racks can be used for the management of palletized items. [Homepage] http://www.jcjh.com/
Inclined shelf type with spill prevention! A modular rack suitable for picking operations.
The "RK Rack (Inclined Shelf Type)" comes with a 20mm spill guard, which prevents items from falling. The assembly of the posts and beams requires one bolt per location (eight bolts per unit), allowing for quick assembly. We also offer racks with arms that make it easy to organize as hooks or dividers. 【Features】 ■ Assembled type ■ Powder-coated ■ Quick assembly ■ Spill guard beam included ■ Plastic adjusters included *For more details, please refer to the PDF document or feel free to contact us.
This is a curtain rail that accommodates not only straight lines but also curves.
●Operability Heavy curtains can be opened and closed with a small amount of force. Since the operation is done by pulling the cord at one point, there is no need to move while pulling the curtain. ●Rich Lineup We offer rails suitable for the curtains being hung. For information on weight and size, please refer to the basic information and catalog. Selfie can also operate by pulling the cord in places with curves. ●Combined Shipping For customers who find it difficult to set up the cord pull, we can ship in an assembled state from our company.
For gear cutting, come to our company! Feel free to consult us about anything related to gears.
Our company specializes in gear cutting and also performs various related processes such as lathe work, keyway cutting, drilling, and tapping. We accept orders not only for gear cutting alone but also for complete processing from materials to finished products, and we can accommodate everything from prototypes to mass production. We offer free estimates and consultations, so please feel free to contact us. 【Product Introduction】 ■ Spur Gears ■ Herringbone Gears ■ Worm & Wheel ■ Timing Pulleys ■ Sprockets, etc. *For more details, please download the PDF or contact us.
Customizable! Introducing our original caster-equipped rack.
Introducing Hirai Seisakusho's original product, the "Caster Rack." The dimensions are W1100×D550×H1000, with square pipe dimensions of 40mm×40mm t1.5, made from SS400 material. Custom orders are also available, and it can be manufactured in stainless steel. For more details, please feel free to contact us. 【Features】 ■ Custom orders available ■ Can be made in stainless steel ■ Dimensions: W1100×D550×H1000 ■ Square pipe dimensions: 40mm×40mm t1.5 ■ Material: SS400 *For more details, please refer to the PDF document or feel free to contact us.
A user-friendly vertical two-tier design for women and the elderly!
We offer a "Vertical Two-Tier Slide Bicycle Rack" that allows bicycles to be stored straight and moved vertically up and down. The lower tier is slide-type, ensuring space for lowering the upper tier without damaging baskets or other items on the lower tier. Additionally, it operates quietly during use. Please feel free to contact us if you have any inquiries. 【Specifications】 ■Upper tier: Vertical up and down movement, JCR-V type ■Lower tier ・Front-loading type, JCR-SF-1 type ・Front/Rear-loading type, JCR-SFB-1 type *For more details, please download the PDF or contact us.
Light and quiet operation! Achieves improved storage efficiency with a two-tier design.
The "JCR-G type" is a fixed two-tier bicycle rack that uses gas cylinders, ensuring not only lightness but also quiet operation when raising and lowering the rack. With two tiers for storage, the capacity is significantly increased, and it can also be installed at an angle (15 degrees or 30 degrees), expanding the range of installation conditions. Additionally, it uses galvanized steel plates for durability. The finish features a weather-resistant powder coating that protects the rack from rust over the long term. 【Features】 - Equipped with a lifting assist device for easy lifting of the upper rack - Significantly improved ease of installation; a unique unit that can be set up by one person - Capable of storing large bicycles up to 28 inches (with a wheel space of up to 1,080mm) - Pitch adjustment is possible between 450mm and 600mm *For more details, please download the PDF or contact us.
A flat slide-type bicycle rack that allows for smooth in-and-out access!
The "JCR-SF-1 type" is a flat slide-type bicycle rack that allows all racks to slide easily to the left and right, expanding the space for easy access. With a single aluminum rail, the area at your feet is kept tidy. It also achieves 100% space efficiency and a safe design. 【Features】 ■ Easy access to bicycles with lateral movement ■ Increases the number of bicycles that can be stored ■ Allows for the movement of several bicycles with minimal effort ■ Comprehensive measures for noise reduction and prevention of tipping *For more details, please download the PDF or contact us.
![[Case Study] Heat Stroke Prevention in the Operating Room: Improving Workplace Environment in Healthcare Settings](https://image.www.ipros.com/public/product/image/2dd/2000703559/IPROS62807118629538822568.jpeg?w=280&h=280)
No need for outside air intake and can be layered, making it suitable for use in operating rooms. A Raidan unit that also reduces the risk of heatstroke!
In the operating room, it is impossible to work with heating and cooling systems on, especially during the peak summer months, which poses a risk of heatstroke. Maintaining concentration while performing such demanding tasks drains the energy and stamina of doctors and nurses. However, since the introduction of the Raidan Unit, many staff members have given high praise, stating that "the working environment has greatly improved." The Raidan Unit has been delivered to various hospitals and is actively contributing to reducing risks associated with fatigue and improving the working environment.
We propose an efficient use of the backroom to eliminate dead space in the management of clothing and similar items!
The introduction of mobile racks effectively utilizes limited space, increasing storage capacity and creating new areas. Inventory management and flow become clearer, making picking faster. Installing them in the backyards of each floor allows for the expansion of sales areas, while their introduction in distribution centers creates new spaces and secures areas for inbound and outbound operations, making it effective. By equipping mobile racks with pipe hangers, they can also accommodate inventory management for jackets and coats. For the footwear industry, a suitable shelf layout contributes to faster product picking and increased storage capacity. We offer proposals utilizing the manual mobile shelves 'Sunrail Reuse' that lead to expanded sales areas, increased storage capacity, and secured workspaces. 【Do you have any of these concerns?】 ■ Can't find products that should be there ■ End up placing items in empty spaces ■ Employees spend too much time searching for products, leading to long warehouse dwell times ■ Aisles are not secured ■ Don't know how to utilize the "shelves currently in use" In fact, many companies such as GUCCI, YSL, and TOD’S have adopted our solutions. *For more details, please download the PDF or feel free to contact us.
Optimal for storing a large variety and quantity with high storage capacity!
The "Slim E-Rack Series" is a product focused on storage efficiency and ease of use. The thickness of the shelves is 15mm, making it the thinnest in the industry. Additionally, by adopting a beamless structure for the entire lower section, we have enhanced storage efficiency and achieved a usable volume ratio of 92%. We offer a lineup of options suitable for subdivided storage. By selecting the optimal option, you can improve picking accuracy and picking efficiency. 【Features】 ■ Maximizes storage space ■ Ideal for storing a variety of small lots ■ Minimalist appearance that enhances the products ■ Slim shelves with a load capacity of 100kg per level *For more details, please refer to the PDF document or feel free to contact us.
Air created by water, safe and comfortable.
The "Pure Washer" is a completely new air purifier that cleans the air using water. The Pure Washer can purify an area the size of a tennis court (approximately 200m²) with just one unit. It is suitable for installation in public spaces where people gather, such as medical and nursing facilities, daycare centers, offices, factories, and stores, and it has already contributed to creating a safe and clean air environment in many locations. 【Features】 ■ Humidifies 2.8L per hour (at 20°C, RH 30% conditions) ■ Odorous components are adsorbed and removed by water mist inside the unit ■ Captured airborne viruses and bacteria are broken down using mildly acidic electrolyzed water ■ Removes impurities in the air that cause allergies, such as pollen and house dust. *For more details, please refer to the PDF document or feel free to contact us.
A custom-made storage rack with freely adjustable shapes and colors.
"STOLLA" is a storage rack that can be freely customized in your preferred colors and sizes, which cannot be achieved with ready-made products. In line with proposals based on floor plans created with CAD, we will provide presentations in 3DCG to help clients easily visualize the final product in terms of perspective and color. [Features] ■ Sizes and shapes can be freely customized to fit the installation location ■ Proposals in 2D and 3D for easy visualization of the final product ■ More individuality through a variety of material choices *For more details, please download the PDF or contact us.
Special racks for hazardous material storage are essential equipment for storing "hazardous materials" as defined by the Fire Service Act. Do your racks comply with the standards of the Fire Service Act?
【Common Concerns Regarding Hazardous Material Warehouses】 ■ We are starting to handle hazardous materials for the first time. ■ The racks in the hazardous material warehouse do not comply with fire safety regulations. ■ The shelves installed in the warehouse are deteriorating. ■ We want to implement earthquake countermeasures in the hazardous material warehouse. ■ We would like to request a comprehensive service from design to construction. ◎ Why Chelsea's "Hazardous Material Warehouse Racks" are Chosen - Compliant with fire safety regulations - Made entirely of non-combustible materials - Fall prevention mechanisms in accordance with regulations - Support for the preparation of required documentation Consistent support from design to construction Assistance belts for preventing tipping are also available. *For more details, please contact us.
Is your storage of hazardous materials completely secure? Please consult us before it becomes a serious issue!
This catalog is a comic that clearly illustrates the importance of storage racks for hazardous materials through the humorous interactions of the characters. President Chicken thought, "I have a case that needs it right away," but did not implement the "hazardous materials storage rack." However, just before, the details of the case changed. The stored items remained as they were. After this, an unexpected tragedy befell President Chicken... You can view the comic via PDF download. [Regarding the installation of hazardous materials storage racks] ■ There is an obligation to submit structural calculation documents to the fire department. ■ If it exceeds standards or is unlicensed, it can lead to serious issues. *For more details, please refer to the PDF materials or feel free to contact us.
Reduce the burden of cumbersome procedures related to earthquake measures at the fire department! One-stop support from design to responsible construction!
We would like to introduce the product catalog for steel frames for hazardous material storage. "Bridges" reduces the burden of complicated procedures for fire departments related to earthquake measures. The seismic coefficient is three times that of standard racks, and all parts, including the legs, are made of non-combustible materials. Additionally, we offer various storage racks such as standard fixed shelves and rail-type movable racks tailored to meet our customers' needs. Please use this for product selection. 【Featured Products】 ■ Bridges Heavy Type / Medium Type ■ Standard Fixed Shelves ■ Rail-Type Movable Racks ■ Platform Cushions ■ Despoles *For more details, please refer to the PDF document or feel free to contact us.
Measures for a large number of suitcases before check-in! Install only when needed with a folding mechanism.
When customers' suitcases accumulate at the entrance during busy times, using this product will prevent the entrance from looking unappealing. Additionally, it can be folded and stored when not in use. Please feel free to contact us if you have any requests. 【Features】 ■ Prevents the entrance from looking unappealing when customers' suitcases accumulate during busy times ■ Can be set up only when needed with a folding mechanism *For more details, please refer to the PDF document or feel free to contact us.
Outstanding stability and mobility, assisting large vehicle maintenance with ample power.
Easily movable with large-diameter wheels, it can be smoothly maneuvered in tight spaces, significantly improving the efficiency of undercarriage service for large vehicles. Safety is enhanced with vertical lifting and an automatic locking mechanism. Being air-driven, it is easy to operate and reduces labor effort.
I don't feel the wind, yet it's cool and warm.
The "ecowin Hybrid" is a new hybrid radiant heating and cooling system that combines air conditioning with ecowin(R) (Eco Win). Thanks to the efficient heat exchange of the hybrid system, it is possible to reduce running costs compared to conventional electric panel heaters. Please feel free to contact us if you have any inquiries. 【Features】 ■ High energy-saving performance reduces electricity consumption ■ Air conditioning can operate in gentle or weak wind mode! Lower electricity costs! ■ Enjoy a comfortable and pleasant environment in your room without feeling the unpleasant wind from the air conditioner *For more details, please download the PDF or contact us.
