Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.
1351～1380 item / All 1866 items
Achieves high-precision micro-dispensing with excellent reproducibility, equipped with a 25-square stepping motor metering pump.
The KP series is a compact metering pump equipped with a 25-angle stepping motor that enables high precision and high resolution dispensing. There is also a type that allows direct attachment of pipette tips. Separate motor control and sensor integration are required.
High-performance compact general-purpose pump
This is a compact, high-precision, high-pressure liquid delivery pump driven by a 42mm square stepping motor. The drive motor uses a stepping motor, allowing for highly accurate flow control. Additionally, by selecting the appropriate materials for the wetted parts, it can be used widely from acids and alkalis to organic solvents.
Achieving palm-sized dimensions while maintaining the performance for liquid chromatography.
This is a pump that has been miniaturized to the size of a palm, designed as a single plunger liquid delivery pump. It can be used in a drafter without worrying about space. Additionally, models that are compatible with organic solvents, acids, and alkalis are available as standard. <Comparison with Peristaltic Pumps> The flow rate does not change even after long hours of use. While peristaltic pumps experience significant changes in flow rate due to tube deformation after prolonged use, the flow rate of Leafbird remains consistent even during extended liquid delivery. It excels in chemical resistance and durability, and can also handle high-pressure liquid delivery. Leafbird allows for material selection based on application needs. Like pumps for liquid chromatography, it is highly durable and capable of high-pressure liquid delivery. Flow rate can be set digitally, making it easy to adjust the flow rate with a digital switch.
A convenient sanitary pump (patented) that complies with the "Food Sanitation Act," essential for food factories.
Sanitary pumps convenient for transferring raw liquids in food, pharmaceutical, and cosmetic factories! These pumps serve as an alternative for transferring and filling low-viscosity liquids (below 1000 CP) without the need for high-viscosity pumps (rotary pumps, drum pumps, mono pumps). Since the discharge side is below 0.2 MPa (maximum pressure) when blocked, there are no leakage accidents from hoses or piping, eliminating the need for relief piping. * Reduces the number of cleaning points. * Minimizes flavor deterioration due to relief. 【Suitable Usage Environment】 〇 Want to use products compliant with the Food Sanitation Act. 〇 Liquid transfer of 1 m³ or less. 〇 Liquid transfer on production lines with a variety of products. 〇 Frequent disassembly and cleaning. 〇 Want to improve work efficiency (want to stop manual labor and lifting containers). 〇 Want to reduce running costs. 〇 Want to achieve compactness and lightweight design. 〇 Want to install directly onto tanks. 〇 Want to link with semi-automatic filling machines without stopping the pump. 〇 Want to transfer liquids without pulsation. * Demonstration units are available for rental (for a fee). * Please consult us if the viscosity is high (medium or high viscosity).
![[Stainless Steel Motor Introduction Case] All Stainless Steel Rotary Pump](https://image.www.ipros.com/public/product/image/c6e/2000743529/IPROS78735417599949314013.png?w=280&h=280)
Introducing a case study on the implementation of stainless steel motors in rotary pumps at food manufacturing sites.
Generally, the rotary pumps used in food manufacturing sites have a gear case made of cast iron and are painted. Additionally, the drive motor is also made of painted cast iron and is covered with a stainless steel box, which allowed liquids and powders to enter the interior, leading to issues such as decay, paint peeling, and rust formation. By making the gear case and motor of the rotary pump stainless steel, not only does it look cleaner, but it also became waterproof, allowing for easy washing off of any adhering seasoning liquids or powders. 【Case Summary】 ■ Issues - Liquids and powders entered the drive motor, causing decay, paint peeling, and rust. ■ Proposal - Use stainless steel for the gear case and motor of the rotary pump. ■ Result - It became possible to wash off any adhering seasoning liquids or powders. *For more details, please refer to the related links or feel free to contact us.
![[Stainless Steel Motor Case Study] Complete Stainless Steel Conversion of Power Mill](https://image.www.ipros.com/public/product/image/e25/2000743531/IPROS84434772276084666084.png?w=280&h=280)
Introducing a case study of the stainless steel motor that has received feedback on improvements in hygiene and work efficiency.
The drive motor section of the crusher (Power Mill) used by the customer was an exposed painted iron motor. Additionally, the uneven surfaces of the motor section were causing the accumulation of contaminants and paint peeling, making it difficult to clean. By switching to an all-stainless steel motor, it became possible to keep the exposed motor of the Power Mill clean. 【Case Summary】 ■ Issues - The drive motor section was an exposed painted iron motor. - The uneven surfaces of the motor section caused the accumulation of contaminants and paint peeling, making it difficult to clean. ■ Proposal - Switch to an all-stainless steel motor. ■ Result - The exposed motor of the Power Mill could also be kept clean. *For more details, please refer to the related links or feel free to contact us.
![[Stainless Steel Motor Case Study] Sanitary Pump (SS Series)](https://image.www.ipros.com/public/product/image/782/2000743532/IPROS90651691120533811860.png?w=280&h=280)
We will respond to everyone's requests, such as wanting to create a washable environment on-site.
Japan Howard Co., Ltd. has introduced a lineup of 3D open impeller type sanitary pumps equipped with the stainless steel motor "SASUMO" for sanitary centrifugal pumps. These products play a significant role in improving the manufacturing equipment in food production sites, where stringent hygiene, safety, and security standards are required. In addition to certifications such as HACCP and FSSC22000, we will respond to your requests for creating a wash-friendly environment on-site. 【Case Overview】 ■Industry: Pump Manufacturer ■Launch Date: Sales began in 2019 ■Model Name: SS31-04 to SS51-75 *For more details, please refer to the related links or feel free to contact us.
![[Stainless Steel Motor Case Study] Adopted for Freezer Equipment (1)](https://image.www.ipros.com/public/product/image/7f5/2000743574/IPROS69575258722185969403.png?w=280&h=280)
If the disposal risk of manufactured products and the frequency of exchanges are high, it is possible to reduce the total cost.
The stainless steel motor "Sasumo" has been adopted for freezer devices that freeze food and ingredients. By repeatedly cleaning inside the freezer device, there were two issues: "peeling of paint and rust occurrence and peeling of iron motors" and "occurrence and peeling of white rust (powder) in aluminum motors." Therefore, we introduced our product to solve these issues. By replacing iron and aluminum motors with stainless steel motors, we can reduce the total cost when there is a high risk of product waste and frequent replacements. 【Case Summary】 ■ Issues - Iron motors: peeling of paint, occurrence and peeling of rust - Aluminum motors: occurrence and peeling of white rust (powder) ■ Proposal - Replace iron and aluminum motors with stainless steel motors ■ Effect - Not only reduces stress for the personnel but also helps stabilize product quality. *For more details, please refer to the related links or feel free to contact us.
40m3 of concrete that can be loaded onto a 4-ton truck!
We have compactly assembled a mixing plant that is essential for ground improvement work.
Since it is electrode-less, pipe cleaning is easy! Flow and pressure calibration can be easily done with the touch panel in the detection section.
The "AMI-50" is a mortar flow meter equipped with a touch pen and capable of data storage via USB. In conventional models, electrodes are located inside the piping, which often leads to damage during cleaning and can result in malfunctions. This product is electrode-free, simplifying the cleaning process. 【Features】 ■ Easy flow and pressure calibration (zero adjustment and calibration can be easily done on the touch panel) ■ Recording on chart paper is also possible (stored inside) ■ Data can be saved to USB (data is in Excel format) ■ The recording section allows you to see the current status on the touch panel ■ Made of all stainless steel, resistant to rust, and long-lasting ■ The recording unit is designed to be rainproof, and the structure minimizes the risk of electric leakage when the door is closed *For more details, please refer to the PDF document or feel free to contact us.
Combining both high water volume and ultra-high pressure! Concrete demonstrates its power in applications like concrete cutting.
The "Super Jet" is the king of water jets, possessing both high-capacity discharge pressure and ultra-high-pressure discharge capabilities. It is effective for concrete demolition and similar tasks. Additionally, our company offers various methods including "ultra-high-pressure water jet technology," "pigging and mechanical methods," "chemical methods (circulation cleaning, oil flushing, etc.)," and "pipe lining methods." 【Features】 ■ Combines both large water volume and ultra-high pressure capabilities ■ Effective for concrete demolition and similar tasks *For more details, please refer to the PDF document or feel free to contact us.
Highly reliable ultra-high pressure three-piston pump! Maximum discharge pressure 300 MPa.
The "Ultra High Pressure 3-Stage Plunger Pump" is an ultra high pressure pump boasting a maximum discharge pressure of 300 MPa. It is used in various applications and industries such as water jet cutting, concrete demolition, paint stripping, and rust removal. 【Lineup】 ■70M ■250M ■400M *For more details, please refer to the PDF document or feel free to contact us.
Eliminate material waste! Fully automatic compact mixing plant that is easy to clean.
The "MMP-10A Series" is a mixing plant that simultaneously achieves high-performance automation and ultra-compact design. By simply setting the mixing ratio or the weight of each material, it can produce high-quality injection liquids with fully automated operation, allowing for significant labor savings. There are three operation modes to choose from: continuous patch automatic operation, single patch automatic operation, and manual operation via button control, which eliminates waste of materials during the work process. 【Features】 ■ Significant labor savings possible ■ Eliminates material waste and facilitates cleaning ■ Reduces labor for cement input ■ Achieves accurate measurement and improved mixing efficiency ■ Contributes to labor savings in data management *For more details, please refer to the PDF document or feel free to contact us.
Pursuing even greater compactness in high capacity! The MG pump series has become even more compact.
The MG-20AFV-S is a type that has modified the layout of the popular grout pump MG-20 series and shortened its overall length. This has improved space efficiency during transportation and site arrangement. The inverter mount is removable, making maintenance of the motor section easier.
The old B2 series has been improved and now comes standard with a speed controller.
Standard equipped with a speed controller. It has also become easier to handle small portions.
It is used to pump wet raw material mud and slurry into a filter press. It also plays a role in wastewater treatment in factories to prevent pollution.
This machine is designed to pump clay solutions and various types of slurry waste for filter press applications, with the aim of filtering and solidifying through pressure applied to the filter.
High-performance, low-cost pump
Despite its small size, it has performance exceeding that of a three-stage turbine, and it is compact and space-saving. It comes with an inverter, allowing for flow rate adjustment.
Better pump for Better Yields !
The BPS-600 pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. Both the impeller and the pump casing are made of high-purity fluororesin with excellent chemical resistance. These components, along with the rotor magnets, make up the pump head. The rotor speed is electronically controlled, allowing for precise control of fluid pressure and flow rate without pulsation. This pump has two types of basic systems. The standalone type includes a control panel that allows manual speed setting on the controller, eliminating the need for a PLC to set speed via an analog signal. The expanded type has a built-in PLC interface, enabling speed setting via external signals or precise flow or pressure control using flow or pressure sensors. For more details, please contact us.
Better Pumps for Better Yields !
The BPS-200 pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. Both the impeller and the pump casing are made of high-purity fluororesin with excellent chemical resistance. These components, along with the rotor magnets, make up the pump head. The rotor speed is electronically controlled, allowing for precise control of fluid pressure and flow rate, with no pulsation. This pump has two basic system types. The standalone type features a control panel that allows manual speed settings, eliminating the need for a PLC to set speed via an analog signal. The expanded type has a built-in PLC interface, enabling speed settings via external signals or precise flow or pressure control using flow or pressure sensors. For more details, please contact us.
Compact & Resonable for Highend Process !
The motor-controller integrated BPS-i100 pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. Both the impeller and the pump casing are made of high-purity fluororesin with excellent chemical resistance. These components, along with the rotor magnets, form the pump head. Unlike conventional BPS systems, the controller and motor are integrated as a driver housing, freeing users from the hassle of cable wiring and space issues. The impeller's rotational speed is precisely controlled by electronic circuits, resulting in no pulsation. With a pulsation-free, valveless structure, inline boosting is possible. The control system features a PI function, allowing for easier construction of closed-loop flow or pressure control using various sensors.
Low Share Design - High Cell Viability
The Puralev single-use pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. The impeller and pump casing are both made of medical-grade polypropylene that is biocompatible (FDA, USP-VI, BSE/TSE, and animal-free) and compatible with gamma sterilization, forming a disposable pump head along with the rotor magnets. The disposable pump head can be easily attached and detached via the pump head socket, significantly reducing the risk of contamination. Additionally, the connection of the pump head casing uses a tri-clamp specification, making attachment and detachment from the piping simple and clean. The rotor speed is electronically controlled, allowing for precise control of fluid pressure and flow rate without pulsation. Furthermore, the interior of the pump head is designed without narrow grooves, enabling gentle transfer of sensitive liquids without residue buildup. For more details, please contact us.
Low Share Design - High Cell Viability
The Puralev multi-use pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. Both the impeller and the pump casing are made of high-purity fluororesin that is biocompatible (FDA, USP-VI, BSE/TSE, and animal-free). These components, along with the rotor magnets, make up the pump head. The rotor speed is electronically controlled, allowing for precise control of fluid pressure and flow rate without pulsation. This pump has two basic system types. The standalone type includes an operation panel for manually setting the speed on the controller, eliminating the need for a PLC to set the speed via an analog signal. The expanded type has a built-in PLC interface, allowing speed to be set by external signals or enabling precise flow or pressure control using flow or pressure sensors. For more details, please contact us.
Set the dilution rate by twisting the lower part of the main body! Introducing a hydraulic concentrated liquid dilution mixing device that does not require electricity.
We would like to introduce the battery-free dilution pump 'D3RE/D25RE' handled by Carrion Co., Ltd. The dilution ratio can be easily set as the scale is visualized. The dilution ratio is set by twisting the bottom of the main unit. The dilution ratio is proportional to the volume of incoming water, so it is not affected by changes in flow rate or pressure that may occur in the main water supply line. 【Features】 ■ No power supply required ■ Dilution ratio can be set with a scale ■ No changes in flow rate or pressure *For more details, please refer to the PDF document or feel free to contact us.
【FOOMA JAPAN Exhibition】For beverages and food! Simplifying daily decomposition/cleaning! Air-driven diaphragm pump
The sanitary pump "One Nut Pump" handled by Chuo Rika is an air-driven diaphragm pump suitable for food, beverages, cosmetics, pharmaceuticals, and more. It reduces the time required for daily disassembly, cleaning, and reassembly! It is CIP cleanable and can withstand high-temperature steam! It has a pressure resistance of up to 0.7 MPa! Each part has no dead angles, allowing for thorough cleaning without missing any residues or dirt. We have received feedback that residual bacteria after cleaning has been reduced to zero! Additionally, there are no sliding parts made of metal, so very little iron powder is generated. You can experience easy disassembly and reassembly at the Interphex exhibition! We also offer free demo units for rent, so please feel free to contact us. 【Product Features】 ■ Zero residual bacteria inside the pump after CIP cleaning ■ Easy disassembly with just one nut, providing excellent cleanability ■ Suitable for hot water and steam cleaning ■ Ideal for transporting high-viscosity liquids such as creams and jams ■ Stainless steel is standard in SUS316L ■ Suitable as a replacement for rotary pumps and snake pumps (superior in cost and maintenance workload) ■ No sliding metal parts, so no iron powder is produced.
[Fire Protection Law Compliant Explosion-Proof Specification] Diaphragm pump (one-nut pump) for transferring hazardous liquids such as chemicals and dangerous substances.
The "K-Style Pump," an air-driven diaphragm pump from Chuo Rika, leverages the characteristics of our product, the "One Nut Pump," which can be assembled and disassembled with a single nut, offering high maintenance and cleaning capabilities. The pump body is made of PTFE or anti-static PTFE, encased in stainless steel. **Features of the K-Style Pump:** - Easily disassembled and cleaned with just one nut - Maintenance can be performed without removing the pump from the piping - Suitable for the transfer of hazardous materials and chemicals with PTFE construction - The exterior of the pump is covered with stainless steel casing, compliant with fire safety regulations - Protected from various pressure and temperature changes *For product details, you can view the materials from [PDF Download] or feel free to [Contact Us].*
![Slurry fluid transfer capable [Magnetic gear metering pump]](https://image.www.ipros.com/public/product/image/991/2000693517/IPROS80113478180627310139.jpeg?w=280&h=280)
USA Micropump's new magnetic gear micro-dosing pump is capable of transferring fluids containing slurry-like substances.
Compared to conventional magnet gear pumps manufactured by Micropump, this pump has strong resistance to liquids containing slurries and boasts a long lifespan. The new magnetic drive "Eagle Drive" is connected to the nickel carbide gear pump head of the GJR series. Using our centrally developed controller, it is easy to set the discharge flow rate and rotation speed!
Air-driven diaphragm pump [One Nut Pump] made of resin, with all wetted parts made of PTFE/Teflon. For the transfer of chemical substances!
This is a resin pump made of all PTFE/Teflon, featuring a one-nut design that allows for disassembly and reassembly with just one nut. It is crafted from a single Teflon block, designed to minimize the number of parts and eliminate potential leaks, functioning as an air-driven diaphragm pump. There is also a black type made of antistatic PTFE available. It retains the advantages of traditional one-nut pumps, allowing access to the diaphragm interior with just one nut while connected to the piping. This significantly reduces the time required for cleaning and maintenance. Many users are able to transfer chemicals that cannot be transported with conventional one-nut pumps made of SUS or aluminum using this mini-chem pump.
Adapted for extrusion volume from 150cc/hr! Available in screw diameters of φ12mm "KMS12" and φ15mm "KMS15".
The "KMS Series" is an extruder suitable for research purposes, designed for very small quantities. The motor capacity is 0.75 kW, and the screw rotation speed is 60 rpm. It is suitable for an extrusion volume starting from approximately 150 cc/hr. We offer the "KMS12" with a screw diameter of φ12 mm and the "KMS15" with a screw diameter of φ15 mm. 【Features】 ■ Ideal for research use ■ Suitable for extrusion volumes starting from approximately 150 cc/hr ■ Motor capacity: 0.75 kW ■ Screw rotation speed: 60 rpm ■ L/D: 25 *For more details, please refer to the PDF document or feel free to contact us.
It has excellent sanitary properties and can be easily disassembled for cleaning.
The pump can handle fluids smoothly and efficiently. It can also be used when hygienic processing is required.
It is used as a backup pump during power outages or emergencies for electric pumps and engine pumps!
The "3C-140-F" is a manual pump developed under the concept of "a simple and failure-free pump." It is widely used as a small hydraulic pump, as well as a backup pump during power outages or emergencies for electric and engine pumps. If you are looking for a manual hydraulic pump, please feel free to consult with us. 【Features】 ■ Maximum operating pressure: 35MPa ■ Displacement: 9cc/1 stroke *For more details, please refer to the external link or feel free to contact us.
