Last Updated： Aggregation Period:Apr 22, 2026～May 19, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 22, 2026～May 19, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 22, 2026～May 19, 2026
This ranking is based on the number of page views on our site.
91～120 item / All 1844 items
High reliability
The liquid connection section is compatible with a wide range of fluids. It can handle high viscosity of 2000 mPa·s and slurry liquids up to 5% demineralized ash. Piping and maintenance are easy. It supports long hours of continuous operation. Discharge volume adjustment is possible during both standby and operation.
It is widely used in various industries such as water treatment, the chemical industry, dyeing and papermaking, the food industry, and the pharmaceutical industry.
Proportional operation according to the main signal. It automatically stops after a specified number of times and sends a completion signal.
Powerful suction and pumping capability, simple structure without valves.
Ideal for self-suction and pumping of foods such as minced meat, pulpy juice, saltwater, cream, and honey. The pump can also rotate in reverse. Cleaning and washing inside the pump piping is easy.
Orion Machinery/Vacuum Pump. Achieves safe design, low operating noise, and long lifespan. Environmentally friendly next-generation pump.
■Safe design, environmentally friendly, CE marking compliant. ■Low operating noise, with a noise reduction of 3dB (compared to conventional models) due to quiet design. ■30% longer lifespan with the adoption of new material blades (compared to conventional models). ■Compliant with RoHS directive.
Manufactured by Orion Machinery. Achieves both high flow rate and high pressure with a 1-cylinder, 2-stage structure.
■ The two-stage structure of the single cylinder achieves both high flow and high pressure! The two-stage structure of the single cylinder has significantly exceeded the pressure range of conventional side channel blowers. ■ Installation position is flexible. Horizontal or vertical placement can be chosen according to the application and installation location. ■ Integrated safety valve structure. An integrated design that matches the blower body has been adopted.
Orion Machinery/Vacuum Pump. An inverter model that controls the basic model with inverter technology to achieve further energy savings.
- Equipped with a newly developed non-contact high-efficiency rotor. The use of a newly developed high-efficiency rotor (non-contact, bladeless) minimizes energy loss due to non-contact with the cylinder, making it energy-efficient. Since no oil is used inside the pump, it provides clean air and is economical. Furthermore, the non-contact design ensures a long lifespan and significantly improves maintenance. It also achieves improved sound quality and quiet operation. - The world's first package-type vacuum pump with an inverter. The pump's rotation speed is controlled by an inverter according to the load conditions of the vacuum usage, enabling energy savings of up to 84%. This contributes to the energy efficiency, longevity, and quietness of the vacuum pump. - Up to 84% energy savings possible with inverter control. The vacuum pump automatically recognizes the load state. Inverter control achieves significant energy savings even at the same vacuum level. - Further quiet operation with a non-contact rotor and double package structure. The low operating noise contributes to environmental improvement. The synergistic effect with the non-contact rotor has achieved 65dB even at 60Hz operation. - Easy operation with an intelligent LCD panel. The operating status and various settings can be checked and operated via the LCD panel. - Smart design improves installation flexibility. Wall mounting is possible, and it features an upward exhaust design. The back and side can be mounted against walls.
Orion Machinery/Vacuum Pump. Adopts the industry's first modular design. A high vacuum, high flow modular multi-model with further evolved energy-saving performance.
■Equipped with a newly developed non-contact high-efficiency rotor. The use of a newly developed high-efficiency rotor (non-contact, bladeless) minimizes energy loss due to non-contact with the cylinder, resulting in energy savings. Since no oil is used inside the pump, it operates with clean air, making it economical. Furthermore, the non-contact design ensures a long lifespan and significantly improves maintenance. It also achieves improved sound quality and quiet operation. ■Continuous operation at a vacuum level of 100 kPa is possible. The coaxial two-stage vacuum pump equipped with a high-efficiency rotor enables continuous operation at a vacuum level of 100 kPa. It maintains the set vacuum level with high precision even when the load fluctuates. ■Vacuum levels can be set across the full range. It can be used over a wide range from 0 to 100 kPa, with no savings sacrificed on vacuum levels (the touch panel setting values range from 5 to 101 kPa). Settings can be made in 1 kPa increments without leaking air. ■Energy savings of up to 80% compared to conventional models. The exhaust structure that prevents over-compression and the two-stage vacuum pump operate at optimal power from near-open vacuum levels to the target vacuum level, regardless of the point of use. This reduces electricity costs. ■Energy-efficient pump structure covering low to high vacuum. Operates at optimal power across the full range of vacuum levels (from open to target). Features an exhaust structure that prevents over-compression.
Orion Machinery/Vacuum Pump. Compatible with a vacuum level of 100 kPa. Motor output of 5.5 kW with a control panel and inverter packaged together. Made to order.
■Equipped with a newly developed non-contact high-efficiency rotor. Using a newly developed high-efficiency rotor (non-contact, bladeless), it minimizes energy loss through non-contact with the cylinder, resulting in energy savings. Since it does not use oil inside the pump, it provides clean air and is economical. Furthermore, due to the non-contact design, it has a long lifespan and significantly improved maintainability. It also achieves improved sound quality and quiet operation. ■Continuous operation at a vacuum level of 100 kPa is possible. The coaxial two-stage vacuum pump equipped with a high-efficiency rotor enables continuous operation at a vacuum level of 100 kPa. It maintains the set vacuum level with high precision even when the load fluctuates. ■Vacuum level can be set across the full range. It can be used over a wide range from 0 to 100 kPa, with no savings sacrificed in vacuum level (the touch panel setting ranges from 5 to 101 kPa). It can be set in 1 kPa increments without leaking air. ■Up to 80% energy savings compared to conventional models. Thanks to the exhaust structure that prevents over-compression and the two-stage vacuum pump, it operates at optimal power from near-open vacuum levels to the target vacuum level, regardless of the point of use. This reduces electricity costs. ■Energy-saving pump structure covering low to high vacuum. It operates at optimal power across the full range of vacuum levels (from open to target). It features an exhaust structure that prevents over-compression.
Grundfos pump. It is a circulation pump that covers a wide range with electronic speed control functionality.
The MAGNA3/UPE pump is a circulation pump that covers a wide range with electronic speed control features based on communication devices, permanent magnets, and small electric motor technology. The MAGNA3 is the most innovative product among the high-quality circulation pumps manufactured by Grundfos. With the MAGNA3, you won't have to worry about complex settings. After installation, it automatically adjusts its capacity while remaining in the factory settings (a feature unique to the MAGNA3). The MAGNA3 automatically analyzes the heating system and adjusts its speed to the optimal capacity, continuously regulating the pump's capacity according to the system's load. As a result, optimal comfort is achieved while minimizing energy consumption. Additionally, the MAGNA3 pump is highly adaptable and reliable, operates quietly, has a long lifespan, and requires no maintenance. Equipped with IR communication capabilities, it can enable external control and monitoring functions when additional expansion modules are added.
Grundfos pumps. A wide range of lineup applicable to various applications.
■Circulation of cold and warm water, circulation of cooling water, and transfer of general industrial water.
Grundfos pump. By installing a flush line (optional) on the sleeve bearing (KPV), maintenance costs are reduced.
■Transportation of air conditioning, water supply, irrigation, and general industrial water.
Grundfos pump. It is a pump developed for the safe handling of fluids with high hazards and corrosiveness.
The CRN Magdrive is a pump developed for the safe handling of hazardous and corrosive fluids. Its magnetic drive system, which eliminates the need for shaft seals, offers high sealing performance and minimizes risks at the pump installation site. Inheriting the features of CRN, it is designed to be 'lightweight' and 'compact' while also achieving 'high-efficiency design' to accommodate high lift applications.
Grundfos pump. In addition to its simple operability, it achieves precise injection across a wide flow range of 60 to 940 liters per hour.
The adoption of stepper motors and EC drives optimizes the control of stroke speed, achieving extremely high precision. The duration of each discharge stroke varies according to the flow rate setting. Although the suction stroke time is always constant, it can be extended using a cavitation prevention feature, allowing for a wide range of needs to be met. In this way, the suction is always performed at full stroke. This enables smooth pumping of the liquid that releases gas and achieves continuous injection with minimal pulsation, which is crucial for injection systems that require long suction lines. The DME pump series, as a compact digital injection device, allows for more precise injection than ever before.
Completely air-operated seal-less pump
The seal-less SLK series pump is a magnetic pump that enables long periods of dry running by suppressing the sliding heat generated during dry operation. Since the sliding heat does not increase, there is no concern about failures due to thermal shock, and it also boasts excellent durability. The pump casing and impeller structure have been redesigned, significantly improving pump efficiency. This has expanded the performance range as a medium flow rate pump, making it easier to select suitable models. Additionally, improved workability allows for a reduction in maintenance costs. *Note: It cannot be used for transferring liquids containing slurries.
Can use both vacuum and blower with a 1-cylinder specification.
- Printing machines, binding machines, bag-making machines, etc. - Reliable domestic pumps - Long life with a non-contact structure - Significant reduction in exhaust temperature by choosing an aftercooler specification - Exhaust air is clean air
Packaging by combining a vacuum and a blower.
- Package combining vacuum and blower - No blade replacement required for non-contact claw rotor that does not use blades - Two-cylinder specification - No need for management of water piping or cooling towers due to air cooling
Low pressure type single-stage side channel series
- High reliability, lightweight - Compatible with different voltages - Equipped with high-efficiency motor - Compliant with international standards - Motor has drip-proof and dust-proof structure - Installation direction is flexible - Oil-free, non-polluting
Recovering the heat from drainage using a heat pump system for effective use in heating water supply. Contributes to reducing running costs and CO2 emissions.
The heat recovery heat pump is a device that effectively utilizes the heat from wastewater that has previously been discarded, recovering it to heat supply water, achieving a heating performance with a maximum outlet temperature of 90°C through heat pump-based heat recovery. Facilities that use heaters or boilers for heating supply water can expect significant reductions in running costs and CO2 emissions with the introduction of this system. In factories that cool return water containing heat from machinery using cooling towers while using heated water for other purposes, it is possible to reduce the running costs of both the cooling towers and heaters.
The Exair® series air amplifiers make it easy to connect during piping!
The "Lineback" is an air amplifier from the Exaier® series that demonstrates its power in rapid air transport. Both the suction and discharge sides have the same diameter, making it easy to connect along the piping. There are 8 models available with connection diameters ranging from 19mm to 102mm. You can choose from two materials: aluminum and stainless steel. [Examples of Use] ■ Transporting various materials such as abrasives (grains), pellets, etc. ■ Removal (recovery) of cutting chips, dust, wood shavings, etc. *For more details, please download the PDF or feel free to contact us.
A suction flow rate comparable to a vacuum pump! Maximum suction flow rate of 877L/min for the Convum!
The "CVZ Series" is a convum with a high suction flow rate comparable to that of a vacuum pump, with a maximum suction flow rate of 877L/min. It is suitable for breathable workpieces, heavy object adhesion, and large-capacity degassing. 【Features】 ■ High suction flow rate comparable to that of a vacuum pump ■ Equipped with a three-stage multi-flow vacuum nozzle ■ Option to select the number of nozzles, and energy-saving by choosing the shared pressure specification of 0.3MPa ■ Large filter removes dust and foreign objects! ■ Pressure sensor can be directly mounted on the main body! ----------------------------------------------------------------------------------------------------- 【Convum Online Shop OPEN!】 →http://shop.convum.co.jp/ 【<ΘΘ> Newsletter "Convum Communication" is being distributed!】 In Convum Communication, we deliver new product information and the latest updates faster than any other SNS exclusively to newsletter subscribers! We look forward to your registration! →https://convum.co.jp/inquiry/ (See details)
Compact design with integrated body and silencer! Achieved weight reduction by using resin.
The "MCV Conbam" is a vacuum ejector equipped with push-in fittings that can be easily connected to piping tubes. With a compact body measuring 78×42.5mm, it features an integrated silencer. By using resin, it has achieved over 50% weight reduction compared to the conventional "CV series." 【Features】 ■ Successor model to the CV series ■ Equipped with push-in fittings ■ Compact: 78×42.5mm ■ Lightweight *For more details, please refer to the PDF document or feel free to contact us.
The body and nozzle material are all stainless steel! Suitable for use in semiconductor manufacturing equipment.
At Myotoku Co., Ltd., we offer custom-made CV convums with all stainless steel materials for chemical and gas resistance, including both the main body and nozzle. We provide materials such as SUS303 and SUS316. These are suitable for the suction of chemicals and gases and can be used in semiconductor manufacturing equipment. We also manufacture a PTFE type that excels in chemical resistance, as well as a version where the nozzle and main body are welded with PTFE. 【Features】 ■ All stainless steel materials for the main body and nozzle ■ Usable in semiconductor manufacturing equipment ■ All PTFE type also available *For more details, please refer to the PDF document or feel free to contact us.
Recommended for gas extraction from containers and rough vacuuming of vacuum chambers!
The "HDV Series" is a high vacuum type vacuum chamber that achieves a vacuum level (-98.6 kPa) even higher than that of a standard vacuum chamber. It is suitable for gas extraction (degasification) within containers and rough pumping in vacuum chambers. 【Features】 ■ Achieves a vacuum level (-98.6 kPa) *For more details, please refer to the PDF materials or feel free to contact us.
Drainage pump for civil engineering and construction work
In civil engineering and construction sites, speedy and reliable drainage is essential for efficient work. That’s why we recommend ShinMaywa's "Drainage Pumps for Civil Engineering and Construction." We offer a wide variety of pumps to handle various drainage needs, including rainwater, groundwater, muddy water, and residual water that occur on-site. They are designed to perform powerfully even under harsh conditions. With a highly reliable mechanism utilizing the latest technology, they work toughly. For more details, please download the catalog or contact us.
This is a submersible pump that crushes sludge with a stirring blade to prevent the impeller from locking.
Are you experiencing issues such as "sludge clogging the pump and preventing it from draining," "the pump not draining when using grinding fluid mixed with air bubbles," "sludge accumulating in the tank," or "the inability to use conventional submersible pumps when the tank is shallow"? The "BTR-YC" submersible pump for grinding machines from ShinMaywa Industries, Ltd. solves these problems. 【Features】 - The stirring blades crush sludge to prevent impeller lock. - It is less prone to air lock, allowing for stable drainage. - It draws from near the bottom, resulting in minimal sludge accumulation. - It can be used at low water levels since motor submersion is not required. - It is compatible with both hose and piping connections. For more details, please contact us or download the catalog.
Two spray guns can be used! It features a turbine pump that is also strong against sludge!
The "WJ5100G" is an engine-powered watering jet suitable for dust and mud cleaning during demolition. With a high water flow, it has a maximum range of 20 to 25 meters (which may vary depending on the environment and other factors). It features large wheels for smooth mobility, and the initial water filling can be easily done from the inlet tray. Please feel free to contact us if you are interested. 【Features】 ■ Can spray a maximum of over 220 liters per minute (with one gun and during diffusion) ■ Can accommodate two spray guns ■ Gasoline engine type that can be used in various work locations ■ Equipped with a turbine pump that is strong against sludge *For more details, please refer to the PDF materials or feel free to contact us.
For the recovery of waste liquid from 5 meters below the underground pit.
《APPQO Series》 APPQO-H (for oil / liquid only) APPQO-HG (for kerosene and diesel / liquid only) APPQO-HAS (for solvents / liquid only) ◎ Compatible with high-viscosity liquids due to vacuum pressure type ◎ Simple structure with no known failures ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a stainless steel can ● Continuous operation possible ● Less prone to breakage compared to electric types ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Liquid only (general oils, etc.) ● Recommended for stainless steel cans (APPQO-SK) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75 kW) or more
Hand-crank pump that performs exceptionally well even in emergencies. For transferring low-viscosity liquids, including gasoline.
"HR Series" HR-25G (For Oil and Gasoline) ◎ Hand-cranked pump that requires no power source ◎ Can be used without sealing the drum ◎ Widely usable from household drums to factories ◎ Suction pipe can be cut "Benefits" ● Easy operation by simply turning the handle ● No power supply needed ● Can be used with A heavy oil and low viscosity oil (below 500 cP) ● Allows for small dispensing of gasoline ● Highly effective in emergencies and disasters "Features" ● Continuous pumping is possible ● Securely fixed to the drum with an adapter ● Comes with a 40 mesh ● Equipped with a magnetic ground wire for static electricity prevention
Quickly transfer low-viscosity liquids.
"MH Series" MH21N-V (for solvents) MH316M-V (for solvents) ◎ Electric 100V ◎ Two types: plastic and stainless steel "Benefits" ● Usable anywhere with a 100V power supply ● Transfers approximately 20L in about 1 minute ● Capable of transferring to high places ● Usable with plastic cans and one-gallon cans "Features" ● Equipped with a ball valve ● Two types: stainless steel and plastic
A pump that uses compressed air to utilize internal pressure for transfer. It is optimal for safely dispensing highly flammable liquids with minimal residual liquid and energy efficiency.
"APD Series Discharge Only" APD-20 (for oil) APD-20N (for oil / with gun nozzle) APD-20G (for kerosene, light oil, gasoline) APD-20GN (for kerosene, light oil, gasoline / with gun nozzle) APD-20AS (for solvents) APD-20ASN (for solvents / with gun nozzle) APD-20SUS (for solvents) APD-20SUSN (for solvents / with gun nozzle) APD-20GATN (for kerosene, light oil / with auto-stop gun) ◎ Explosion-proof specification that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate "Benefits" ● Minimal residual liquid (about 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible "Features" ● Exclusively for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum type for discharge only, recovery not possible ● Double pressure reduction with regulator and safety valve for peace of mind ● Equipped with an anti-static grounding wire (only for G, AS, and SUS types)
