pump×ビカ・ジャパン - List of Manufacturers, Suppliers, Companies and Products

pump Product List

16～21 item / All 21 items

Displayed results
Maximum supply pressure: 160MPa Hydraulic comparison calibration pump CPP1600

Maximum supply pressure: 160MPa Hydraulic comparison calibration pump CPP1600

It has a maximum supply pressure of 160 MPa with good operation, a connection mechanism that allows for the alignment of measuring instruments, and a built-in priming pump capable of handling a large volume of tests.

The pressure measuring device can be used as a pressure generation source for testing, adjusting, and calibrating pressure measuring instruments in laboratories, workshops, and on-site. It allows for smooth operation of the hand spindle even at high pressures, and the size of the main body does not change when the pump is operated. By connecting the test item to a high-precision reference measuring instrument, the same pressure is supplied to both measuring devices when the pump is activated. By comparing two measurements at any pressure value, you can verify accuracy and adjust the testing machine. Both connection points are equipped with quick-release connectors with knurled nuts and interchangeable screw inserts (standard G½ female). Conversion adapters are also available for calibrating devices with different connection standards. <Specifications> - Supply pressure range: 0 ... 1,000 bar or 0 ... 1,600 bar - Pressure supply medium: mineral oil - Pressure supply ports: 2 G1/2 male threads - Pump size: (L x W x H) 400 x 375 x 265 mm - Weight: 20 kg For more details, please refer to the product data sheet. 【Maximum supply pressure: 160 MPa】Hydraulic comparison calibration pump CPP1600

  • pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Maximum supply pressure: 100MPa Hydraulic comparison test pump CPP1000

Maximum supply pressure: 100MPa Hydraulic comparison test pump CPP1000

It has a maximum supply pressure of 160 MPa with good operation, a connection mechanism that allows for the alignment of measuring instruments, and a built-in priming pump capable of handling a large volume of tests.

The hydraulic comparison test pump CPP1000/CPP1600, which allows you to choose a maximum supply pressure of either 100MPa or 160MPa, serves as a pressure source for testing, adjusting, and calibrating pressure measuring instruments through comparative measurements. It is particularly suitable for use in laboratories, workshops, and on-site. By connecting the test item and a high-precision reference measuring instrument, the same pressure is supplied to both measuring devices when the pump is activated. You can compare two measurements at any pressure value to verify accuracy and adjust the testing equipment. Both connection points are equipped with quick-release connectors with knurled nuts and interchangeable screw inserts (standard G½ female). We also offer conversion adapters for calibrating equipment with different connection standards. <Specifications> - Supply pressure range: 0 ... 1,000bar or 0 ... 1,600bar - Pressure supply medium: Mineral oil - Pressure supply ports: 2 G1/2 male threads - Pump size: (L x W x H) 400 x 375 x 265 mm - Weight: 20 kg For more details, please refer to the product data sheet. 【Maximum supply pressure: 100MPa】Hydraulic comparison test pump CPP1000

  • pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Maximum supply pressure: 100MPa Hydraulic comparison calibration pump CPP1000

Maximum supply pressure: 100MPa Hydraulic comparison calibration pump CPP1000

It has a maximum supply pressure of 160 MPa with good operation, a connection mechanism that allows for the alignment of measuring instruments, and a built-in priming pump capable of handling a large volume of tests.

The pressure measuring device can be used as a pressure generation source for testing, adjusting, and calibrating pressure measuring instruments in laboratories, workshops, and on-site. It allows for smooth operation of the hand spindle even at high pressures, and the main body size does not change when the pump is operated. By connecting the test item to a high-precision reference measuring instrument, the same pressure is supplied to both measuring devices when the pump is activated. By comparing two measurements at any pressure value, you can verify accuracy and adjust the testing device. Both connection points are equipped with quick-release connectors with knurled nuts and interchangeable screw inserts (standard G½ female). We also provide conversion adapters for calibrating equipment with different connection standards. <Specifications> - Supply pressure range: 0 ... 1,000 bar or 0 ... 1,600 bar - Pressure supply medium: mineral oil - Pressure supply ports: 2 G1/2 male threads - Pump size: (L x W x H) 400 x 375 x 265 mm - Weight: 20 kg For more details, please refer to the product data sheet. 【Maximum supply pressure: 100 MPa】Hydraulic comparison calibration pump CPP1000

  • pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Maximum supply pressure: 400MPa Hydraulic comparison calibration pump CPP4000

Maximum supply pressure: 400MPa Hydraulic comparison calibration pump CPP4000

This is a hydraulic comparison test pump capable of supplying pressure up to 4,000 bar, featuring fine pressure adjustment and a lightweight, compact design.

The CPP4000 model can generate a maximum pressure of 400 MPa. With a built-in dual-area spindle pump equipped with a switching valve, it enables rapid pressure supply and smooth pressure generation while allowing for fine adjustments of the pressure. It is an ideal hand pump for calibrating high-pressure measuring instruments and is used for product inspection and pre-shipment calibration. <Specifications> - Supply pressure range: 0 ... 4,000 bar - Pressure supply medium: Mineral oil - Pressure supply ports: G1/2 male thread union nut, metal cone type, 2 locations - Pump size: (L x W x H) 401 x 397 x 155 mm - Weight: 13.5 kg For more details, please refer to the product data sheet. 【Maximum supply pressure: 400 MPa】Hydraulic comparison calibration pump CPP4000

  • pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Air Pressure Supply / Compatible with 12MPa] Pneumatic Test Pump CPP120-X

[Air Pressure Supply / Compatible with 12MPa] Pneumatic Test Pump CPP120-X

It consists of two parts: a pressure inlet and a pressure outlet or vacuum port, equipped with an adjustable mechanism for fine-tuning pressure and a pressure gauge to display the supply pressure.

This is a pneumatic comparison test pump designed to supply pressures of up to 120 bar. It can be used in laboratories, workplaces, or on-site as a pressure source for comparative testing, adjustment, and calibration of pressure measuring instruments. When connecting the tester to a reference pressure measuring instrument with sufficient accuracy, the same pressure is supplied to both instruments. By comparing two measurements at any pressure value, accuracy verification and adjustment of pressure measuring instruments can be performed. It is equipped with two precision metering valves for pressure inlet and outlet, and comes with an adjustable mechanism that allows for precise pressure settings for accurate comparison tests. The connection for external pressure or vacuum sources is located on the rear panel. <Specifications> - Supply pressure range: 0 ... 120 bar - Pressure supply source: Air - Pressure supply ports: 2 G1/2 male threads - Pump size: (L x W x H) 510 x 490 x 210 mm - Weight: 22 kg For more details, please refer to the product data sheet.

  • pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Small Pneumatic Hand Test Pump Model: CPP10-H

Small Pneumatic Hand Test Pump Model: CPP10-H

Switching between positive and negative pressure, with precise settings possible through a fine-tuning valve. Simple, ergonomically designed for good operability, and a compact, lightweight pneumatic pump.

This product is designed to be used as a pressure generator for the comparative calibration, adjustment, and testing of mechanical and electrical pressure gauges and reference standards. Its compact and lightweight design allows for use in various locations, including on-site, in factories, and in laboratories. By connecting the test equipment and the reference standard to this product, uniform pressure can be applied. By using a sufficiently accurate reference standard compared to the test equipment, adjustments and calibrations of the pressure and output of the test equipment can be performed based on the readings from the reference standard. By operating the fine adjustment valve built into the product, more precise pressure can be generated. This product is intended for low-pressure generation, with a maximum pressure of 10 bar [145 psi]. It is also capable of generating negative pressure, with a minimum pressure of -0.85 bar [-25 inHg]. The achievable maximum/minimum pressure may vary depending on the connection capacity. A cylinder-type hand pump allows for smooth pressure increase, and using the fine adjustment valve enables safe and accurate adjustments of positive/negative pressure in mbar units. By using a T-connector on the pressure hose, both the test equipment and the reference standard can be connected simultaneously.

  • pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to pump

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.