更新日： 集計期間:Feb 18, 2026～Mar 17, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
61～90 件を表示 ／ 全 232 件
Selectable fine mist for cooling air conditioning
■Low Pressure Easy Mist Pump Set No pump or compressor needed, and no power required. Just connect to the water supply to create mist. Easy setup. All necessary parts for installation and connection are included. ■High Pressure Mist Pump Unit Generates fine mist around 20μm using a high-pressure pump and dedicated nozzle. For mist cooling, effects, and more.
![[Case Study] Kanazaki Dental Clinic, Matsuyama City, Ehime Prefecture](https://image.www.ipros.com/public/product/image/e3d/2000741077/IPROS06262195221570540187.png?w=280&h=280)
By installing it on the water supply pipe at the outlet of the water tank, all the water in the clinic will be UFB hydrated!
Typically, cleaning is done with acidic water such as hypochlorous acid water, but there were issues with tube degradation and corrosion of metal parts. Unlike a typical facility with just one 20A, this project involved an entire building that was a dental clinic, so the nozzle was installed as the water supply piping at the outlet of the water tank. Immediately after water flow, the biofilm in the unit tube was detached, and by using the unit daily, the remaining biofilm gradually decreased, ultimately allowing the unit tube to be returned to a clear state. [Case Summary] ■ Issue: Tube degradation and corrosion of metal parts ■ After installation - Supply of ultra-fine bubble water became possible to 8 treatment rooms on the 2nd floor, 5 treatment rooms on the 3rd floor, all floor restrooms, and the disinfection room. - The unit tube was returned to a clear state. - Reattachment was hardly observed, maintaining a clean condition. *For more details, please refer to the related links or feel free to contact us.
Effectively humidify indoor spaces! It is effective for preventing influenza infections and addressing dryness during the winter months.
"Clean Mist" is a fine water mist spraying device specialized for indoor humidification, utilizing the capabilities of Eco Mist. By evaporating the finely misted water, it humidifies the indoor environment. It is capable of providing sufficient humidity even in large spaces such as halls, which was previously difficult with just one unit. Please feel free to contact us when you need assistance. 【Features】 ■ Indoor humidification specification ■ Stepless air volume adjustment ■ Passes leaching performance tests compliant with the Water Supply Act (excluding SIH-60S5) ■ Equipped with humidity sensor for ON-OFF control ■ Intermittent operation timer function *For more details, please refer to the PDF materials or feel free to contact us.
It enables a wide range of flow control and supports flexible intermittent injection through a cylinder integrated into the nozzle.
A square-shaped air mist nozzle that is easy to install. It can be used for various applications such as humidification, moisture control, deodorant spraying, cooling, sterilization and disinfection, dust suppression, cleaning, and chemical spraying. It can achieve atomization and uniform application even at low pressure, resulting in minimal drift to the surroundings, which improves application efficiency and reduces liquid material loss. Additionally, by minimizing drift to the surroundings, it helps mitigate the deterioration of the working environment. For more details, please download the catalog or feel free to contact us.
Finally here! High-pressure washing tank cleaning nozzle "PressureClean"
The Rehira company has finally unveiled its high-pressure cleaning tank cleaning nozzle! We have expanded our lineup with high-pressure cleaning. This product can effectively clean stubborn dirt from small tanks using only a small amount of water. PressureClean is rated at cleaning efficiency class 5 and features an IP-65 certified motor housing. This nozzle is characterized by being made from high-quality materials (SUS316 L, EPDM, PTFE, PEEK, ceramic). The interface with the tank is a clamp connection compliant with DIN 32676 (TriClamp).
Atomization of liquid without pressure by piezo vibration for spraying. Enables uniform application while reducing power consumption and liquid waste.
Ultrasonic waves are transmitted to the nozzle through the vibration of piezoelectric ceramics, vibrating the liquid film to form and spray fine particles. It accommodates a wide range of liquid flow rates from a minimum of 10 ml/min to a maximum of 100 ml/min, with particle size remaining almost constant across the entire flow range. ◆Product Features◆ - Energy-saving as it can supply liquid with low power without pressurizing - Uniform atomization regardless of flow rate - Particle size remains almost constant across the entire flow range - Resistant to clogging, ensuring high operational safety - Good coating efficiency due to the slow self-velocity of particles - Maximum flow rate for standard specifications is 100 ml/min - Operating frequency ranges from 20 to 130 kHz (varies by model) - Outer particle diameter ranges from 11.8 to 42 μm (varies by model) ◆Accessories◆ By using an air transport device, it is possible to freely change the spray shape of the applied fine particles (droplets). ◆Liquid Delivery Pump◆ Precise control is possible by using a syringe pump or similar device for liquid delivery. ≪Key Point≫ Demo units are available for loan, so please feel free to contact us. ※※Ultrasonic Cleaning Device※※ Sonosys also manufactures and sells ultrasonic cleaning devices.
Nano Bubble Cooling Nozzle: Prevents Coolant Decomposition and Extends Lifespan | Easy Replacement Type for Retrofitting
Achieving Long Life for Coolant with Nanobubbles This product is a high-performance nozzle that suppresses the growth of anaerobic bacteria in coolant liquid through the generation of nanobubbles, preventing coolant spoilage and extending its lifespan. It addresses issues in machining environments such as unpleasant odors, spoilage, and increased replacement frequency of coolant, contributing to reduced running costs and improved working conditions. ■ Features Extended lifespan of coolant liquid No construction required, easy installation Angle adjustment available Diverse lineup of nozzles ■ For companies facing these challenges Concerned about the odor of spoiled coolant Want to reduce coolant replacement frequency Looking to strengthen measures against bacteria Searching for improvement solutions that can be retrofitted without construction Want to improve the environment in cutting processing sites For more details, please download the catalog or feel free to contact us.
It is possible to generate a fine mist from its compact body.
This nozzle can spray mist at an angle of approximately 20° from a compact body measuring 31 mm in length. It can be installed as an alternative for localized mist cleaning or in places where spray guns are difficult to attach. It is also ideal for dispensing deodorizing and disinfecting liquids, and installation within ducts is easy. It is versatile for various parts cleaning, mist cleaning, and precision cleaning. 【Features】 - Space-saving design allows for easy installation in narrow spaces. - Lightweight at approximately 25 g. - Efficiently atomizes liquids at rates from a few to several hundred mL/min. - Simple structure allows for easy disassembly and maintenance.
Lightweight and compact type! Ultra-low pressure mist generation two-fluid charging cone nozzle.
The "Charging Cone Nozzle LSIM" is a large flow two-fluid charging cone nozzle composed of multiple parts such as a nozzle tip, cap, adapter, and O-ring, capable of generating a fine mist with an average particle diameter of 40μm or more. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. (Liquid flows in the center of the nozzle, while compressed air flows around the outer perimeter in an internal mixing external air type.) It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Low running costs due to blower air specifications ○ Maximum particle diameter of 150μm at an average particle diameter of 80μm ○ Atomization design nozzle with no coarse particles ○ Compact and lightweight ○ Spray angle of 20° For more details, please contact us or download the catalog.
Convenient when attached to the end of a hose in combination with an electric pump or air pump! The gun nozzle automatically stops when full.
◎Stop without using electricity or batteries This nozzle has a mechanism that automatically stops when full, using liquid level detection without the need for electricity or batteries. Auto-stop functions with a constant flow rate and pressure, so it cannot be used with gravity drop. *Please pay attention to the usage pressure and flow rate range. *The flow meter uses batteries. 《Advantages》 ● Easy operation at your fingertips ● Automatically stops when full ● Cost reduction through liquid management 《Features》 ● Dispenses when squeezed, stops when released ● Includes lever hook ● Equipped with a flow meter ● Not usable with gravity drop or siphon methods
Equipped with the exhaust heat recovery system "Energy," it helps reduce steam emissions and contributes to energy savings and improved working conditions!
"UF Energy" is a model of the cleaning machine "UF Series" for equipment, parts, and containers, equipped with an optional steam recovery function. [About Energy] It features a patented circulation exhaust heat recovery system that recovers the thermal energy of the steam released during each cleaning cycle, reducing energy consumption. The heat from the steam is utilized for preheating the low-temperature supply water. When the door is opened, very little warm, moist steam escapes, contributing to a comfortable working environment. Additionally, it eliminates the need for a water heater, reducing running costs. [Features] ■ Improvement of indoor environment ■ No need for a water heater ■ No need for a hood ■ Reduction of running costs *For more details, please refer to the catalog or feel free to contact us.
Fine mist generation small spray volume type! Spray pattern with a circular small spray volume hollow cone nozzle.
The "Uniform Distribution Nozzle (Small Spray) KKBP" is a small spray conical nozzle with an annular spray pattern. It features a unique whirling design that allows for a large foreign object passage diameter, making it resistant to clogging while generating fine mist. There are two types of screw sizes: tapered male threads and parallel male threads. The design is compact with fewer parts, consisting of just two components: the nozzle body and the whirling element, which is removable for easy maintenance. 【Features】 - Conical nozzle for fine mist generation with small spray volume - Small spray conical nozzle with an annular spray pattern - Large foreign object passage diameter, resistant to clogging - Compact design with fewer parts - Removable whirling element for easy maintenance For more details, please contact us or download the catalog.
Fine mist and medium mist generated! A two-fluid fan-shaped nozzle capable of thin spraying in the thickness direction with strong impact force.
The "Fan-Shaped Nozzle VVEA" is a two-fluid nozzle composed of multiple parts including a nozzle tip, cap, mixing adapter, and liquid socket. It features internal mixing, where compressed air and liquid are mixed inside the nozzle for atomization. (It is a pre-mix type that mixes liquid and compressed air within the nozzle adapter.) The liquid is pressurized and supplied to the two-fluid nozzle, spraying at a pressure of approximately 0.2 to 0.7 MPa. 【Features】 ○ A nozzle that sprays fine mist with a thin thickness and uniform distribution. ○ A two-fluid fan-shaped nozzle that generates fine mist with an average particle diameter of over 50 μm. ○ Capable of spraying with a thin thickness in the thickness direction and strong impact force. ○ A liquid pressurization type that sprays at a pressure of approximately 0.2 to 0.7 MPa. ○ It has a wide flow adjustment range with minimal variation in spray angle. For more details, please contact us or download the catalog.
Round type! Air nozzle with air amplification function, quietness, and uniformity.
The "Straight Nozzle TAIFUJet TF-BR" is an air nozzle designed for pinpoint targeting in gaps and narrow spaces. It features a width of 23mm, a total length of 50mm, a hole diameter of φ3.0mm, and a heat resistance of 80℃ (for resin) and 400℃ (for metal), making it a compact round nozzle. The TAIFUJet uses a blower that reduces energy costs to about one-third compared to compressor air. It has a unique design that incorporates air amplification, quiet operation, and uniformity. 【Features】 ○ Blower air specification ○ Energy cost is one-third of compressor specification ○ Excellent impact uniformity ○ Superior quietness ○ Compact round nozzle For more details, please contact us or download the catalog.
One handle with three effects! Clogs eliminated! Nozzle header with self-cleaning function.
The "BRASIKan(R)" is a nozzle header that allows for easy cleaning of the nozzle simply by operating the handle while it remains installed. It is ideal for areas where nozzle clogging is a concern and maintenance is difficult. The brush material is made of PP (polypropylene), which has low wear and can be used for an extended period. It features a handle drop prevention mechanism and allows for the replacement of just the brush part, ensuring a reliable design. A FRP header (with a TN titanium nozzle) is also available for use with acidic liquids. 【Features】 ○ Nozzle header with self-cleaning function ○ Built-in nozzle cleaning brush ○ Rotating the handle cleans the nozzle orifice with the brush ○ Discharges foreign matter from the piping to resolve clogging ○ Available in manual type and air-driven type for remote cleaning For more details, please contact us or download the catalog.
A collaborative product of Lehira's nozzle technology and Sonosis's ultrasonic technology.
Particles (droplets) formed by the ultrasonic spray nozzle are broken up by the vibration of the piezo element. In other words, unlike pressurized systems, the particles do not have speed. As a result, they either fall naturally or become suspended due to the influence of wind. Therefore, carrier air is used to transport the formed particles for application.
Built-in check valve on the air side! Mist fan-shaped nozzle usable for both 1 and 2 fluid specifications.
The "Fan-Shaped Nozzle VVP+AS" is a fog fan-shaped nozzle composed of multiple parts including the nozzle body, adapter, air socket, and check valve, and can be used in both single-fluid and dual-fluid configurations. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. A check valve is built into the air side, allowing it to be used as a single-fluid nozzle in the medium to high water flow range and as a dual-fluid nozzle in the low water flow range. It is a liquid pressurization type that supplies liquid to the dual-fluid nozzle. 【Features】 - Usable in both single-fluid and dual-fluid configurations - Single-fluid in medium to high water flow range, dual-fluid in low water flow range - Wide turn-down ratio (throttle ratio) of 1:20 - Suitable for use in environments with minimal variation in flow distribution and spray angle - Built-in check valve on the air side For more details, please contact us or download the catalog.
For various cooking utensils, for stubborn stains. In professional environments where results are demanded.
The "UF Series" is a cleaning machine suitable for various cooking utensils and stubborn stains. It features innovative characteristics that ensure low running costs and the best hygiene results. With a powerful cleaning force of up to 1 bar of water pressure, it can handle extremely stubborn stains such as proteins, starches, and fats. It boasts a robust design with excellent durability. Additionally, it has a foldable door for easy access to the interior, allowing for cleaning tasks without the door getting in the way. 【Features】 ■ Powerful cleaning force ■ Easy internal cleaning with a foldable door ■ Simple layout changes *For more details, please refer to the catalog or feel free to contact us.
Powerful humidification! You can consider it for humidifying various places!
We would like to introduce a case study from a theater studio that has implemented our high-pressure mist humidifier, "Clean Mist." 【Case Overview】 ■ Facility: Theater Studio (Tokyo) ■ Installation Location: Rehearsal Room ■ Usage Period: November to April The facility was in a situation where people had to gather for rehearsals even during an outbreak of infectious diseases. To raise humidity as a measure against infections, they had placed a household-sized humidifier, but there was no change in the hygrometer, leading them to consider using a commercial humidifier. They were looking for a humidifier that could significantly increase humidity and discovered our "Clean Mist." After trying it out in a free demo, the effect was remarkable. Although the high ceiling posed a challenge, the powerful mist spray from the high-pressure pump allowed them to raise humidity without any issues. I believe the humidifying power of "Clean Mist" can only be understood through actual experience. If you are interested, please feel free to contact us. *For more details, please refer to the PDF materials or feel free to reach out to us.
Compatible with multi-variety production! Mist fan-shaped nozzle usable with both 1st and 2nd fluid specifications.
The "Fan-Shaped Nozzle DDRP+AS" is a fog fan-shaped nozzle composed of multiple parts including the nozzle body, adapter, air socket, and check valve, and can be used in both single-fluid and dual-fluid configurations. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. A check valve is built into the air side, allowing it to be used as a single-fluid nozzle in medium to high water flow ranges and as a dual-fluid nozzle in low water flow ranges. It is a liquid pressurization type that supplies liquid to the dual-fluid nozzle. 【Features】 - Usable in both single-fluid and dual-fluid configurations - Single-fluid in medium to high water flow ranges, dual-fluid in low water flow ranges - Wide turn-down ratio (throttle ratio) of 1:20 - Suitable for use in environments with minimal variation in flow distribution and spray angle - Spray pattern thickness angle of 60°, allowing for surface cooling For more details, please contact us or download the catalog.
Super compact type! A small spray fan nozzle with a wide flow adjustment range.
The "Fan-Shaped Nozzle (Small Amount Spray / Ultra Compact) SCBIMV" consists of four components: nozzle tip, core, cap, and adapter, and is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of less than 100μm. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the outer circumference in an internal mixing air type.) It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Switchable between two spray patterns: uniform & triangular distribution ○ Minimum spray flow rate among two-fluid systems ○ Wide flow adjustment range ○ Ultra compact type with a total length of approximately 42mm ○ Equipped with ON-OFF control function For more details, please contact us or download the catalog.
Super compact type! A small spray fan-shaped nozzle with an even flow distribution across the entire area.
The "Fan-Shaped Nozzle (Fine Mist / Ultra Compact) SCBIMV.S" consists of four components: nozzle tip, core, cap, and adapter, and is a two-fluid fan-shaped nozzle that generates fine mist with an average particle diameter of less than 30μm. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the outer perimeter in an internal mixing air type.) It is a suction type that draws up the liquid and sprays it using the force of compressed air. 【Features】 ○ Uniform spray pattern with consistent flow rate across the entire area ○ Minimum spray flow rate among two fluids ○ Ultra compact shape with an overall length of approximately 42mm ○ No need for equipment to pressurize the liquid ○ Equipped with ON-OFF control function For more details, please contact us or download the catalog.
Atomize the coating liquid with piezo vibrations! Minimal splatter and rebound without pressure! Compatible with a wide range of flow rates.
The Sonia Corporation's "Ultrasonic Spray Nozzle" utilizes piezoelectric vibrations to agitate liquids, forming fine particles and spraying them. It can accommodate a wide range of liquid flow rates from 10 mL/min to 100 mL/min, and since it does not apply pressure to the liquid, it features minimal splatter and rebound. This eliminates waste of the applied liquid and removes the need for large booths. It is suitable for applications such as coating, humidifying, and disinfecting. 【Features】 - Resistant to clogging and high operational safety - Uniform ultrasonic atomization regardless of liquid flow rate - Low power consumption and inexpensive running costs - Available in two types: wide spray and narrow spray. ★We are currently offering demo units that you can try out!★
Small spray type! A two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 100μm or less.
The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV" is a mist generation nozzle that can switch between two spray patterns: uniform and triangular distribution. It is a two-fluid fan-shaped nozzle that generates mist with an average particle diameter of less than 100μm. It is a liquid pressurization type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It can produce two patterns: a uniform flow distribution across the entire area and a triangular distribution that is strong in the center and gradually weakens towards the ends, offering a wide range of flow adjustment. 【Features】 ○ Switchable between uniform and triangular distribution, two spray patterns ○ Minimum spray flow in two fluids ○ Compact type ○ Structure resistant to clogging ○ Spray angles of 45°, 80°, and 110° For more details, please contact us or download the catalog.
Small spray type! A two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less.
The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV.S" is a space-saving, high-performance nozzle designed compactly from the BIM series of mist generation nozzles. It is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less. It is a suction type that does not require a liquid pressurization device, as it uses compressed air to draw up the liquid and spray it. The two-fluid nozzle consists of four parts: a nozzle tip, core, cap, and adapter, providing an even flow distribution across the entire area. 【Features】 ○ Two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less ○ Even spray pattern with uniform flow across the entire area ○ No device required for liquid pressurization ○ Compact type ○ Spray angle of 80° For more details, please contact us or download the catalog.
![[Part 2] High cleaning power even at low pressure! 'Rehilar Company's tank cleaning nozzle'](https://image.www.ipros.com/public/product/image/bdb/2000321003/IPROS43511945133007001992.jpeg?w=280&h=280)
Recommended for water-saving and energy-saving measures! Complies with hygiene and explosion-proof standards. Materials featuring installation examples available. For the food, beverage, and medical fields.
We offer a wide range of "tank cleaning nozzles" manufactured by Lehner, which are essential for the product manufacturing processes in the food, beverage, and medical fields. These nozzles comply with various international standards related to hygiene and explosion protection, including FDA (U.S. Food and Drug Administration), 3A standards, and ATEX directives. Additionally, they possess high impact force even at low pressure, contributing to improved work efficiency by reducing cleaning liquid usage and shortening cleaning time. Effective cleaning can be achieved. ★ We are currently providing materials that include the standards our products comply with and layout photos! You can read them immediately from the [PDF download]. 【Features】 ■ Excellent hygiene and explosion protection, compliant with EHEDG standards and regulation (EC) no. 1935/2004, among others. ■ A lineup of 20 types tailored to various applications, including fixed spray balls and rotating tank cleaning nozzles. ■ Capable of foam spraying. In addition to lending demo units, you can visualize the effects of switching to Lehner tank cleaning nozzles using our specialized software, TankClean, to see what benefits it could bring. 2024/10/17 ◆ We have added the long-awaited case studies.
Compact type! Hollow cone nozzle that generates fine mist with an average particle diameter of 100μm or less.
The "Hollow Cone Nozzle (Low Volume Spray) CBIMK" is a two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of less than 100μm in an annular spray pattern. It consists of four components: nozzle tip, core, cap, and adapter, and is a liquid pressurized type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It has a wide flow adjustment range with a spray angle of 60°. This is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. 【Features】 ○ Two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of less than 100μm ○ Liquid pressurized type that sprays at a pressure of approximately 0.1 to 0.3 MPa ○ Annular spray pattern ○ Wide range of spray flow adjustment ○ Structure that is resistant to clogging For more details, please contact us or download the catalog.
Suction type! Hollow cone nozzle that generates a fine mist with an average particle diameter of 30μm or less.
The "Hollow Cone Nozzle (Small Amount Spray) CBIMK.S" is a two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 30μm or less, featuring an annular spray pattern. It is a suction-type two-fluid nozzle composed of four parts: nozzle tip, core, cap, and adapter, which uses compressed air to draw up and spray the liquid. It has a spray angle of 60° and employs internal mixing to atomize the liquid with compressed air inside the nozzle. 【Features】 ○ Two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 30μm or less ○ Suction type that does not require a liquid pressurization device ○ Annular spray pattern ○ Spray angle of 60° ○ Compact type For more details, please contact us or download the catalog.
![[Third Edition] Things You Want to Read Before Selection! "Trivia about Air Knives"](https://image.www.ipros.com/public/product/image/c97/2000394121/IPROS83107847521906474199.jpeg?w=280&h=280)
Third installment! For those of you who have been unable to solve problems until now... Here are numerous case studies for problem-solving!
Are there any issues with the food processing drying process or the blowing off of water droplets from cans/bottles? The Sonic Air Knife System, with its high airflow and high-speed air, efficiently and economically solves such problems! Tasks that required a pressure of 0.4 MPa can now be achieved with just 15-20 kPa! When comparing the airflow of a compressor and a sonic blower, obtaining an airflow of 7 m³/min requires 60 HP (53 kW) with a compressor. In contrast, a sonic blower achieves this with only 5 HP (3.7 kW). The difference is significant compared to compressors and domestic blowers! For those who have not been able to resolve issues until now… we have numerous case studies for problem-solving! 【Case Studies】 - Food/Beverage Industry - Automotive Industry - Pharmaceutical Industry - Steel Industry, etc. *For more details, please refer to the PDF materials or feel free to contact us. *We also have a 'Case Study Collection' that we send out regularly. If you have any requests, please feel free to contact our staff.
