nozzle(20) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.

nozzle Product List

46～60 item / All 143 items

Displayed results
2-fluid nozzle "Hollow Cone Nozzle (Low Flow Spray) CBIMK.S"

2-fluid nozzle "Hollow Cone Nozzle (Low Flow Spray) CBIMK.S"

Suction type! Hollow cone nozzle that generates a fine mist with an average particle diameter of 30μm or less.

The "Hollow Cone Nozzle (Small Amount Spray) CBIMK.S" is a two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 30μm or less, featuring an annular spray pattern. It is a suction-type two-fluid nozzle composed of four parts: nozzle tip, core, cap, and adapter, which uses compressed air to draw up and spray the liquid. It has a spray angle of 60° and employs internal mixing to atomize the liquid with compressed air inside the nozzle. 【Features】 ○ Two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 30μm or less ○ Suction type that does not require a liquid pressurization device ○ Annular spray pattern ○ Spray angle of 60° ○ Compact type For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV"

2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV"

Small spray type! A two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 100μm or less.

The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV" is a mist generation nozzle that can switch between two spray patterns: uniform and triangular distribution. It is a two-fluid fan-shaped nozzle that generates mist with an average particle diameter of less than 100μm. It is a liquid pressurization type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It can produce two patterns: a uniform flow distribution across the entire area and a triangular distribution that is strong in the center and gradually weakens towards the ends, offering a wide range of flow adjustment. 【Features】 ○ Switchable between uniform and triangular distribution, two spray patterns ○ Minimum spray flow in two fluids ○ Compact type ○ Structure resistant to clogging ○ Spray angles of 45°, 80°, and 110° For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV.S"

2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV.S"

Small spray type! A two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less.

The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV.S" is a space-saving, high-performance nozzle designed compactly from the BIM series of mist generation nozzles. It is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less. It is a suction type that does not require a liquid pressurization device, as it uses compressed air to draw up the liquid and spray it. The two-fluid nozzle consists of four parts: a nozzle tip, core, cap, and adapter, providing an even flow distribution across the entire area. 【Features】 ○ Two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less ○ Even spray pattern with uniform flow across the entire area ○ No device required for liquid pressurization ○ Compact type ○ Spray angle of 80° For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Hollow Cone Nozzle (Low Flow Spray) CBIMK"

2-fluid nozzle "Hollow Cone Nozzle (Low Flow Spray) CBIMK"

Compact type! Hollow cone nozzle that generates fine mist with an average particle diameter of 100μm or less.

The "Hollow Cone Nozzle (Low Volume Spray) CBIMK" is a two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of less than 100μm in an annular spray pattern. It consists of four components: nozzle tip, core, cap, and adapter, and is a liquid pressurized type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It has a wide flow adjustment range with a spray angle of 60°. This is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. 【Features】 ○ Two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of less than 100μm ○ Liquid pressurized type that sprays at a pressure of approximately 0.1 to 0.3 MPa ○ Annular spray pattern ○ Wide range of spray flow adjustment ○ Structure that is resistant to clogging For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Defoaming nozzle "FN120CWA, FN120CWS"

Defoaming nozzle "FN120CWA, FN120CWS"

Instantly eliminate clogs with the defoaming nozzle! Available in two types: stainless steel resistant to rust and ABS resin!

At Niikura Industrial Co., Ltd., we have been continuously developing various spray nozzles using our own technology for over 50 years. We carry out standardization, thoroughly manage manufacturing and quality control, maintain a constant stock of standard products (SUS304, ABS resin), and are equipped for immediate delivery. Our products are available in two types: ABS resin and stainless steel. 【Features】 ○ Immediate clog resolution ○ Significant weight reduction ○ Rust-resistant ○ 10,000 operational tests conducted For more details, please contact us or download the catalog.

  • Water Treatment
  • Garbage disposal, central dust collection, laundry, compressor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Full Cone Nozzle 'Wide Angle Uniform Distribution Nozzle (Wide Spray Angle Type) BBXP'

Full Cone Nozzle 'Wide Angle Uniform Distribution Nozzle (Wide Spray Angle Type) BBXP'

Difficult to clog! Uniform and wide-angle circular spray pattern conical nozzle.

The "Wide Angle Uniform Distribution Nozzle (Wide Spray Angle) BBXP" is a conical nozzle with a circular spray pattern and uniform flow distribution. With a spray angle of 120°, it can cover a wider area than any other nozzle. It consists of two parts: the nozzle body and an X-shaped wobbler, forming an integrated nozzle with the wobbler pressed into the body. The use of an X-shaped wobbler in the rotating element allows for a large foreign object passage diameter, making it less prone to clogging. It is available in small to medium flow rates. 【Features】 ○ Circular spray pattern with uniform and wide flow distribution ○ Structure with a large foreign object passage diameter, making it less prone to clogging ○ Wide spray angle of 120° covering a broad area ○ Integrated nozzle with the wobbler pressed into the body ○ Available in small to medium flow rates For more details, please contact us or download the catalog.

  • Water Treatment
  • Aggregates and crushed stone
  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HD camera-equipped cleaning nozzle "Clean View"

HD camera-equipped cleaning nozzle "Clean View"

It's amazing that you can record while keeping the inside clean. It's truly killing two birds with one stone! You can check the recorded footage immediately on a tablet device.

"What kind of nozzle should I use without any ambiguity?" "Was proper cleaning achieved?" "Is a detailed investigation (camera inspection) necessary?" For those who are thinking this way, 'Clean View' is a low-cost camera-equipped nozzle that allows you to quickly and easily see the condition of the pipes after cleaning. It records high-definition footage of the interior of the pipes, which can be viewed immediately using a computer or tablet. [Features] ■ High-definition camera with built-in recording device and lighting ■ Can be attached to your high-pressure cleaning vehicle (hose thread 3/4 inch or 1 inch) ■ Simple operation ■ Instant video confirmation on tablet devices or PCs that support SD/SDHC cards *For more details about the product, please download the catalog or contact us.

  • Sanitary fixtures
  • Waterproof, moisture-proof, explosion-proof lighting fixtures
  • Waterproofing work

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Water-Saving Nozzle Bubble90

Super Water-Saving Nozzle Bubble90

Maximum water-saving rate of 95%! Equipped with a clog prevention flush function, no maintenance required.

◆2009 "Super Monozukuri Parts Grand Prize" Award Winner◆ "Bubble90" is a faucet nozzle that vibrates and releases aerated water, efficiently incorporating air into tap water at high pressure. By simply installing it on a faucet, it changes the amount of bubbles released from regular tap water and rhythmically strikes the bubbles to effectively remove dirt from the items being cleaned! 【Features】 ○ Immediate effect! Achieves a 95% water-saving rate ○ Easy installation with no hassle! Maintenance-free structure ○ Instant adjustment of water pressure according to preference ○ Patent obtained 【Case Studies (Partial Introduction)】 ○ Supermarket Backroom Water bill: Before installation 4.3 million yen/year → After installation 3.6 million yen/year ○ Izakaya Chain Water bill: Before installation 2 million yen/year → After installation 1.5 million yen/year For more details, please download the catalog or contact us.

  • System kitchen equipment and accessories
  • Kitchen appliances
  • Kitchen appliances

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Conveyor cleaning rotating nozzle "New Rotary Arm Jet"

Conveyor cleaning rotating nozzle "New Rotary Arm Jet"

Achieves high-efficiency cleaning of the conveyor with stable rotation due to its unique structure.

Achieving high-efficiency cleaning with stable rotation through a unique structure. Operates solely with a pump due to liquid flow reaction drive. Simple design for easy maintenance. Can be installed in any direction: up, down, or sideways. Flow rate and spray pattern can be changed by replacing the nozzle tip. 【Details】 Maximum operating pressure: 2.0MPa Maximum flow rate: 28.5L/min (at 2.0MPa) Arm lengths: 200, 300, 500mm Inlet connection: Rc1/4 Main material: SUS304 Drive method: Reaction rotation type Maximum operating temperature: 70℃ Spraying Systems, a global brand of spray nozzles, offers nozzles suitable for various applications based on over 90,000 items of proven performance. *For information about Spraying nozzles, please download the PDF or contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hollow Cone Nozzle "Spillback Nozzle SPB"

Hollow Cone Nozzle "Spillback Nozzle SPB"

Massive generation of fine mist! Extremely low particle size variation air cone nozzle.

The "Spillback Nozzle SPB" is a variable flow conical nozzle (return nozzle) that produces a large amount of fine mist in a circular spray pattern. The spray flow rate can be adjusted by opening and closing the discharge valve while maintaining a constant supply water pressure, with the maximum spray flow rate at fully closed and the minimum at fully open. The turndown ratio of the spray flow rate (throttling ratio) is 1:10. The change in particle size between maximum and minimum spray flow rates is small, making it ideal for vapor cooling when the inlet gas temperature varies. 【Features】 ○ Circular spray pattern ○ Variable spray flow rate ○ Turndown ratio of 1:10 ○ Minimal change in particle size ○ Suitable for gas cooling with variations in flow rate and temperature For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Air suction type fan-shaped nozzle "Uniform Distribution Nozzle (Air Suction Type) EJVV"

Air suction type fan-shaped nozzle "Uniform Distribution Nozzle (Air Suction Type) EJVV"

Standard pressure 0.3 MPa! Air suction type fan-shaped nozzle with a large spread in the spray thickness direction.

The "Uniform Distribution Nozzle (Air Suction Type) EJVV" is an air suction type fan-shaped nozzle that provides a uniform spray pattern with a wide flow distribution across its entire area. Compared to standard fan-shaped nozzles, it has a greater spread in the direction of spray thickness, with a width-to-thickness ratio of 3 to 4:1. The foreign object passage diameter and average particle diameter are slightly larger than those of standard fan-shaped nozzles, and when multiple nozzles are arranged, overlapping the patterns at both ends results in an even flow distribution across the entire width. 【Features】 ○ Uniform spray pattern with a wide flow distribution across the entire area ○ Width-to-thickness ratio of the spray pattern is 3 to 4:1 ○ Greater spread in the direction of spray thickness compared to standard fan-shaped nozzles ○ Slightly larger foreign object passage diameter and average particle diameter compared to standard fan-shaped nozzles ○ Composed of three parts: spray tip, cap, and adapter For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rehiler Company rotary tank cleaning nozzle (Model number: 500.234)

Rehiler Company rotary tank cleaning nozzle (Model number: 500.234)

Lechler: The world's smallest nozzle! Its compact design allows for cleaning in tight spaces.

The 500.234 series is a full stainless steel rotating nozzle equipped with slide bearings. Its very compact design allows for use in tight spaces. *Lechler GmbH is a German spray nozzle manufacturer.*

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rehilar Corporation rotary tank cleaning nozzle (Model: 566 series)

Rehilar Corporation rotary tank cleaning nozzle (Model: 566 series)

Cleaning with effective flat jet nozzles. Explosion-proof specifications are also available.

The 566 series is equipped with an effective flat jet nozzle and uses PEEK material slide bearings. It is a nozzle suitable for FDA and EC No. 1935/2004, particularly used in the food and beverage industry. An ATEX version compliant with explosion-proof standards is also available upon request. *Lechler GmbH is a German spray nozzle manufacturer.*

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Replacement nozzle for Sain-made air blow gun.

Replacement nozzle for Sain-made air blow gun.

Nozzle for air blow guns that meets all needs.

There are types that can be directly attached to the screw parts of the Sain-made Series 208, 209, and 210 air fluid guns, or used by attaching them directly to the tube. We offer a variety of replacement nozzles, including safety nozzles that discharge air when blocked in compliance with OSHA standards, and low-noise types with noise levels below 85 dB.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to nozzle

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.