jig Product List and Ranking from 39 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.

jig Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.

  1. null/null
  2. null/null
  3. 港製器工業 Osaka//Building materials, supplies and fixtures manufacturers 【本社】
  4. 4 null/null
  5. 5 イマダ Aichi//Building materials, supplies and fixtures manufacturers
Go to Company Ranking

jig Product ranking

Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.

  1. Air Conditioning Drain Pipe Pneumatic Test Fixture 'New Model! Air Seal Tester'
  2. Hydrostatic test fixture for high-density polyethylene pipes (JIS outer diameter)
  3. Steel Frame Construction Adjustment Tool 'ATOMU-701' [Greatly Active at Construction Sites!] 港製器工業 【本社】
  4. 4 KM-type weep hole mounting jig (for 50V and 75V) 'KMV type'
  5. 5 Hydrostatic test fixture for high-density polyethylene pipes (ISO outer diameter)

jig Product List

61～75 item / All 116 items

Displayed results
Soldering Strength Measurement Jig SJ Series

Soldering Strength Measurement Jig SJ Series

Measuring the soldering strength of the QFP leads on the substrate and chip components! Compatible with various chip components with four selectable tip widths!

The QFP lead hook SJ-QFP-01 is a fixture suitable for tensile strength testing of QFP leads soldered to a substrate. The chip shear fixtures SJ-TIP-01/02/03/04 are designed to measure the shear strength of chip components soldered to a substrate. You can choose from four tip widths: 0.25mm, 0.5mm, 2mm, and 4mm. 【Features】 ■ It enables strength measurement in compliance with various JIS/IEC standards. - JIS Z 3198-6: 2003 - JIS C 62137-1-1: 2010 (IEC 62137-1-1: 2007) - JIS C 60068-2-21: 2006 - JIS Z 3198-7: 2003 - JIS C 62137-1-2: 2010 (IEC 62137-1-2: 2007) * For the corresponding fixtures for each standard, please refer to P1 "Related Standards" in the SJ series catalog. ■ Replacement blades for the consumable hooks, QFP45-SB-1, are also available for purchase (for SJ-QFP-01 only). 【Usage Image】 Please refer to the "Related Videos" below.

  • Work tools
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cap Clamp Fixture "CCJ Series"

Cap Clamp Fixture "CCJ Series"

Securely fixed from four directions! Standard pins, serrated pins, and long pins are available for selection!

We would like to introduce our cap clamp fixture, the "CCJ Series." It can securely hold cylindrical samples from four directions. It is suitable for insertion or removal tests of cosmetic caps and round connectors. You can choose from standard pins, serrated pins, or long pins according to your application. 【Lineup】 ■CCJ-100N ■CCJ-100N-01 ■CCJ-100N-02 ■CCJW-100N ■CCJW-100N-01 ■CCJW-100N-02 *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Both-end hook fixture "SHF Series"

Both-end hook fixture "SHF Series"

It is possible to hook and pull from both ends! Suitable for tensile testing of cap-shaped samples!

The "SHF Series" is a fixture for both ends that can handle a maximum load of 100N. It is suitable for testing caps of the covering type (over caps). Unlike grip-type fixtures, it allows for hooking the over cap at both ends, enabling tensile testing without crushing or damaging the sample. 【Features】 ■ Allows for hooking and pulling the sample from both ends ■ Ideal for tensile testing of caps and cap-shaped samples ■ Standard and long-arm type products can be selected according to the size of the sample *For more details, please refer to the PDF materials or feel free to contact us.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HTGS/A Rotational Auxiliary Tool "RSH Series"

HTGS/A Rotational Auxiliary Tool "RSH Series"

Supports various samples! Can be combined with an angle gauge to analyze the torque-angle relationship.

The "RSH Series" is a rotational auxiliary fixture suitable for torque measurement in the horizontal direction for HTGS/A. It enables torque measurement for small motors and for turning volume switches. The stage position can be easily changed with lever operation, making it easy to attach and detach samples. Additionally, the sensor position can move up to 105mm, allowing for the measurement of samples of different sizes. By allowing free movement on the stage, it is also possible to measure samples that experience forward and backward movement due to rotation, such as screws. 【Features】 - Easy stage position adjustment with lever operation - Simple attachment and detachment of samples - Capability to measure samples of different sizes - Ability to measure samples that experience forward and backward movement due to rotation - Possible to analyze the torque-angle relationship when combined with an angle gauge *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Manual Rotation Assist Tool "SDT Series"

Manual Rotation Assist Tool "SDT Series"

Standard type and angle meter equipped type are available! Continuous measurement of rotating measurement samples is possible.

The "SDT Series" is a manual rotation assist device specifically designed for the DTXS/A series. By continuously turning the knob, you can maintain the rotation of the measurement sample for ongoing measurement, and by combining it with attachments tailored to the sample (sold separately), it is possible to measure various torques as a simple testing machine. Additionally, when combined with an angle gauge, it is also possible to analyze the torque-angle relationship. 【Features】 ■ Manual rotation assist device specifically for the DTXS/A series ■ Continuous measurement of sample rotation by continuously turning the knob ■ By combining with sample-specific attachments (sold separately), it can measure various torques as a simple testing machine ■ It is also possible to analyze the torque-angle relationship when combined with an angle gauge *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High Load Compression Test Fixture 'SP Series (Spherical)'

High Load Compression Test Fixture 'SP Series (Spherical)'

Supports a maximum load of 5000N! Capable of measuring the compressive force and breaking strength of various samples, including cushioning materials.

The "SP Series" is a spherical compression testing fixture that can handle loads up to 5000N. It is suitable for measurements that require pinpoint pressure, such as tablet crushing strength tests, rather than surface pressure. The outer diameter of the sphere can be selected from 10mm, 20mm, or 30mm to match the measurement sample, and custom modifications such as dimensions, materials, and load capacity changes can be accommodated based on the sample and measurement conditions. 【Features】 ■ Suitable for high-load compression and destruction tests up to 5000N ■ Capable of measuring the compressive force and destruction strength of various samples, including cushioning materials ■ The outer diameter of the sphere can be selected from 10mm, 20mm, or 30mm to match the measurement sample ■ Custom modifications are possible to accommodate samples and measurement conditions *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High Load Compression Test Fixture 'SQ Series (Rectangular Type)'

High Load Compression Test Fixture 'SQ Series (Rectangular Type)'

Custom orders are also possible! We can measure the pressure resistance of tablets and plastic packages.

The "SQ Series" is a rectangular compression testing jig that can handle a maximum load of 5000N. Thanks to its free joint design, which allows for a range of 15 degrees in all directions, it can be closely aligned with the sample, enabling accurate measurements. It is suitable for testing the pressure resistance of sealed packs such as retort foods and for measuring the hardness of balls. 【Features】 ■ Ideal for high-load compression and destruction tests up to 5000N ■ Capable of measuring the pressure resistance of tablets and plastic packages ■ Free joint design allows for closer contact with samples (SQ-5075/SQ-5150) ■ Magnetic type allows for easy attachment and detachment of contact points (SQ-5075/SQ-5150) ■ Customization is available to suit samples and measurement conditions *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Urethane Spherical Compression Fixture "UR Series"

Urethane Spherical Compression Fixture "UR Series"

Supports a maximum load of 50N! It can be made to feel closer to the sensation when pressing a sample with your finger.

The "UR Series" is a urethane spherical compression fixture that can handle a maximum load of 50N, making it ideal for compressive measurements of areas operated by fingers, such as buttons on devices. It prevents damage to the measurement target and can also be used for final inspections before shipping. You can choose from two types of hardness. Additionally, customizations such as changes in dimensions, materials, and load capacity can be accommodated to suit samples and measurement conditions. 【Features】 ■ Spherical urethane material compression fixture ■ Feels similar to pressing the sample with a finger ■ Prevents damage to the measurement sample ■ Usable for final inspections before shipping ■ Customization available according to requests *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Grip Force Measurement Tool "PCA-150N"

Grip Force Measurement Tool "PCA-150N"

Wide range of support from industrial tools to everyday products! The opening width can be easily adjusted with the scale.

The "PCA-150N" is a gripping force measurement device that can handle a maximum load of 150N, allowing for the measurement of the gripping force, pinching force, and opening force of samples. It accommodates a wide range of samples, from industrial tools like tweezers, pliers, and clips to everyday products. The opening width can be easily adjusted using the scale. Measurement can be performed simply by attaching a force gauge, and it is lightweight and easy to carry. 【Features】 ■ Supports a maximum load of 150N ■ Capable of measuring a wide variety of samples from industrial tools to everyday products ■ Easy adjustment of opening width using the scale ■ Lightweight and easy to transport *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Variable Weight Reciprocal Friction Force Measurement Fixture 'VWF-10N-J'

Variable Weight Reciprocal Friction Force Measurement Fixture 'VWF-10N-J'

Measure the friction force between the flat test body and contact elements such as pens! It is also possible to calculate the static friction coefficient and average dynamic friction coefficient using optional software.

The "VWF-10N-J" is a device used to measure the frictional force between flat test specimens such as paper and contactors like pens. By changing the contactor holder, it can measure a variety of samples, and it also supports vertical load adjustment using weights and the measurement of reciprocating frictional force. Using separately sold graphing software, the static friction coefficient and average dynamic friction coefficient can be easily calculated. 【Features】 ■ A device for measuring the frictional force between flat test specimens such as paper and contactors like pens ■ Can measure a variety of samples by changing the contactor holder ■ Supports vertical load adjustment using weights and measurement of reciprocating friction *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Lure fitting connection fixture "MED-LFA-20N Series"

Lure fitting connection fixture "MED-LFA-20N Series"

Streamlining weight measurement using injection needles! Since the needle base can be directly connected to the force gauge, there is no need to remove the needle tube!

The "MED-LFA-20N series" is an adapter that allows injection needles to be attached to a force gauge by the needle base. This eliminates the hassle of removing the needle tube, thereby improving the efficiency of measurements such as puncture resistance tests on vials. Three types are available according to the shape of the luer fitting. 【Features】 ■ Direct connection of the needle base to the force gauge eliminates the need to remove the needle tube. ■ Three types available according to the shape of the luer fitting. ■ Measurement partially compliant with ISO standards is possible. We also offer a fixture for securing vials to the measurement stand. Vial Fixing Fixture MED-VH-5N - https://www.forcegauge.net/product/detail/med-vh *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Temperature Probe Mounting Fixture for Constant Temperature Bath MBW Spider

Temperature Probe Mounting Fixture for Constant Temperature Bath MBW Spider

A mounting fixture for positioning temperature sensors at the four corners and center during the calibration of a constant temperature and humidity chamber. With this, calibrating multiple constant temperature chambers becomes easy!

● No need to fix the sensor in the constant temperature and humidity chamber ● Temperature and dew point sensors can be fixed to the self-supporting stand ● Graphing of 9 temperature points and 1 dew point ● 9 temperature points can be converted to relative humidity ■ The MBW Spider is a mounting fixture for fixing sensors during calibration in a constant temperature and humidity chamber. It is made of 11 stainless steel rods and silicone material that protects and insulates the temperature sensors. The rods can be installed in a total of 11 positions: the four corners and the center line on both the top and bottom surfaces. This design meets the testing standards and guidelines for constant temperature chambers such as EURAMET/cd/20, IEC60068, DKD-R5-7, and NF X 15-140. ■ When combined with a mirror-type dew point meter, it can be used to evaluate the uniformity of relative humidity by combining uniform temperature and dew point measurements. This method complies with the aforementioned standards and guidelines. ■ The separately sold T12 thermometer is a multi-channel temperature measurement system capable of measuring up to 12 thermometers. With its unique software, it allows real-time measurement of humidity distribution from temperature/dew point data. For more details, please download the catalog or contact us.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Test fixture for pre-filled syringes - ISO 11040-4 fixture

Test fixture for pre-filled syringes - ISO 11040-4 fixture

We provide a fixture package to test all 10 items of ISO11040-4!

Pre-filled syringes are generally tested according to ISO 11040-4. Glass syringes are more susceptible to breakage than plastic syringes, so a wider variety of tests are required based on ISO 11040-4. There are a total of 10 annexes within ISO 11040-4, each requiring different testing methods. Some of the annexes require rotational motion, so the "ISO 11040-4 fixture" is designed to be compatible with simple tensile, compression, and Torsion Add-On (twisting additional option) systems. [Strengths of Instron Testing Machines (Partial)] ■ The fixtures are designed to conduct various tests with minimal fixtures. ■ The fixtures adopt a modular design to minimize the number of necessary parts. ■ Instron's service department supports the introduction of testing machines. ■ Reduces operator training time. *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to jig

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.