jig Product List and Ranking from 82 Manufacturers, Suppliers and Companies | IPROS

Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.

jig Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.

  1. SK-KAWANISHI Co., Ltd. Kagawa//Building materials, supplies and fixtures manufacturers
  2. 三伸機材 本社 Tokyo//others
  3. 港製器工業 【本社】 Osaka//Building materials, supplies and fixtures manufacturers
  4. 4 null/null
  5. 5 ニチワ Tokyo//Building materials, supplies and fixtures manufacturers
Go to Company Ranking

jig Product ranking

Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.

  1. Hydrostatic test fixture for high-density polyethylene pipes (JIS outer diameter) SK-KAWANISHI Co., Ltd.
  2. Distortion Correction Jig Iron Man (Steel Frame Scaffolding) 三伸機材 本社
  3. Hydrostatic test fixture for high-density polyethylene pipes (ISO outer diameter) SK-KAWANISHI Co., Ltd.
  4. 4 Steel Frame Construction Adjustment Tool 'ATOMU-701' [Greatly Active at Construction Sites!] 港製器工業 【本社】
  5. 5 Nichiwa Co., Ltd. "Misalignment Adjustment Tool" ニチワ

jig Product List

151～180 item / All 194 items

Displayed results
19-inch rack equipment mounting fixture "Rack-n"

19-inch rack equipment mounting fixture "Rack-n"

Improving the efficiency of equipment installation work and enhancing safety! Achieving a reduction in worker burden and preventing falls.

The "Rack~n" is a mounting tool for 19-inch rack equipment that allows for easy installation by one person, even with heavy equipment. The size of the tool is compact at 1U and can support a maximum load of 20 kg. It can be folded compactly, making it convenient for transport. Please feel free to contact us when you need it. 【Features】 ■ Can be installed without supporting the equipment ■ Can be stored compactly ■ Expands for installation on the rack's ears when in use *For more details, please refer to the related links or feel free to contact us.

  • Work tools
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Back Shield Gas Supply Tool "Pipe Back Shield Tool"

Back Shield Gas Supply Tool "Pipe Back Shield Tool"

Production efficiency has dramatically improved! Back shield jigs compatible with multiple sizes and shapes of pipes.

The "Pipe Back Shield Tool" is a product that directly supplies shielding gas to the back side of the weld. It can accommodate multiple sizes and shapes through the exchange of disks and mesh on both sides. Back shielding starts instantly, freeing you from the stress of waiting for shielding gas to fill the pipe, significantly improving production efficiency. 【Features】 ■ Significantly improves production efficiency ■ Compatible with pipes of various sizes and shapes ■ Can be used in combination with a shielding gas supply base ■ Available in two types: standard and long *For more details, please refer to the PDF document or feel free to contact us.

  • Work tools
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Back Shield Gas Supply Tool "Shield Gas Supply Base"

Back Shield Gas Supply Tool "Shield Gas Supply Base"

No need to fill shield gas! By using it in conjunction with "HIPURGE," shield gas is automatically supplied inside the pipe.

The "Shield Gas Supply Base" is a shield gas supply tool that does not require the detachment of the back shield jig. By attaching it between the positioner and the chuck, it allows for the supply of shield gas into the pipe from the chuck side. When used in conjunction with our sold back shield jig for pipes, it can directly supply shield gas right under the weld bead. 【Features】 ■ No need to detach the jig when attaching or detaching the pipe ■ Automatically supplies shield gas into the pipe when used in conjunction with "HIPURGE" ■ Allows for direct supply of shield gas right under the weld bead when used with the back shield jig for pipes ■ We offer three types of compatible chucks: WP-200, WP-300, and WP-400. *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Boot attachment and detachment jig for Tong Manipulator 'TKBF-S'

Boot attachment and detachment jig for Tong Manipulator 'TKBF-S'

It can also be used for tong operation training devices and the like! It has been made lighter and is easier to handle than conventional boot attachment and detachment jigs.

The Tong Manipulator is a system designed for remotely handling radioactive materials and hazardous substances, installed in facilities such as reprocessing plant analysis lines at nuclear-related research institutes, irradiated fuel testing facilities, irradiated materials testing rooms, hot cells in fuel cycle facilities, and hot cells in radioactive material handling facilities. When attaching, replacing, or detaching the dedicated boots, which are mechanical components for maintaining airtightness, it is necessary to perform the exchange while keeping the airtight condition. Therefore, a dedicated boot attachment and detachment jig is used for this purpose. 【Features】 ■ Can be attached and detached while maintaining the airtightness of our boots and support rings ■ Made of metal except for the operating handle, allowing for long-term use ■ The main body has been lightweighted, making it easier to handle compared to conventional boot attachment and detachment jigs ■ Designed for use with our manufactured enclosures ■ Compatible with lead swivel joints and resin swivel joints *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Transport and storage fixtures

Transport and storage fixtures

We have produced numerous jigs for transporting and storing industrial products in existing boxes and mesh pallets, helping our customers.

Depending on the purpose, we use different materials such as Palonia, Pradan, Durawood, and PE foam, and we manufacture them using techniques like die-cutting and cutting with a plotter. We will also provide suggestions from the design and drafting stage, including assembly and adhesion.

  • Packaging materials
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
One-Touch Vertical Lifting System 'SSKP Insert'

One-Touch Vertical Lifting System 'SSKP Insert'

【Streamlining Construction Sites!】 Ideal for lifting operations such as pedestrian and vehicle boundary blocks! Eliminates repetitive tasks and achieves labor-saving in operations!

The "SSKP Insert" is a one-touch vertical lifting system suitable for reducing labor in lifting operations, such as boundary blocks for pedestrian and vehicle paths at construction sites. It features a dedicated mounting jig for manufacturing sites that allows for one-touch attachment to formwork. Post-processing is also simple. This system eliminates the repetitive tasks of screwing in and removing traditional eye bolt methods, achieving labor savings in operations. 【Features】 ■ Patent No. 3248089; PL insurance included ■ Low cost ■ Easy to install ■ Realizes labor savings in on-site work ■ Convenient series *For more details, please refer to the PDF materials or feel free to contact us.

  • Road facilities
  • Road construction
  • Paving Materials
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
~Successful case studies of 500 sets of machining~

~Successful case studies of 500 sets of machining~

Support from small and medium lot machining to jigs, dedicated machines, and prototype development.

017【Our Technical Expertise】2024/10/11 ~Successful Case of Machining 500 Sets~ We are Nitto Kousakusho Co., Ltd., engaged in precision machining in Hirakata City, Osaka Prefecture. This time, we would like to introduce a case of machining 500 sets. (This time, we carried out the entire process from material procurement to surface treatment.) The machining this time involved a repeat production of 500 sets, utilizing our long-cultivated know-how in jig manufacturing to independently design and produce machining jigs. We implemented efficient and precise machining using NC lathes and machining centers. In particular, the machining jigs we produced this time maintained machining accuracy while achieving work efficiency and cost reduction. This significantly improved productivity and allowed us to provide high-quality parts. Furthermore, we offered significant benefits in terms of cost to the client and successfully completed the delivery. Leveraging our extensive know-how in machining, we will continue to provide optimal solutions in the future. ◎ We offer a wide range of services from simple machining requests and small to medium lot machining to consulting for machining and prototypes. Please feel free to consult with us. ◎ If you have a desired price, please let us know.

  • others
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
~Equal Four-Jaw Chucking Fixture~

~Equal Four-Jaw Chucking Fixture~

We are a comprehensive manufacturing company that offers precision machining for single items, as well as processing for small to medium lots, design and production of jigs and dedicated machines, and support for prototype development.

033【Our Technical Capabilities】2025/07/17 This time, we would like to introduce our original chucking fixture, which was conceptualized, designed, and manufactured in-house to improve processing efficiency and workability when we undertook the mass production machining of bronze cast products. This fixture is characterized by its structure that allows simultaneous processing of two workpieces using a two-axis parallel drill, emphasizing machining efficiency. Therefore, even if there is a thickness variation of up to 1.5mm between the two workpieces (the white and blue plates in the photo), it is designed to ensure that they are chucked evenly and securely with four claws. Additionally, a single tightening lever can open and close all four claws simultaneously, making the workpiece loading and unloading process very efficient. A video demonstrating the operation of this fixture is available on YouTube. Please take a look at the actual movement. ▶ [Watch the video here https://www.youtube.com/watch?v=k4ivsqcKDpc ] ▶ [Also, please visit our website https://www.nitto-mfg.com/ ]

  • others
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Processing Example] Processing jigs for automotive parts

[Processing Example] Processing jigs for automotive parts

Cost reduction through design! Introducing examples of machining jigs for automotive and machine tool manufacturers.

We received a request from a company in the automotive industry to handle everything from design to finishing. In response, our company implemented cost reductions through design. Additionally, we used machines such as lathes, machining centers, grinders, fixture borers, and three-dimensional measuring machines. 【Overview】 ■ Processing fixtures (processing fixtures for automotive parts) ■ Production capacity: 2 units per month ■ Processing materials: castings, iron ■ Machines used: lathes, machining centers, grinders, fixture borers, three-dimensional measuring machines ■ Work size: Length 500mm × Height 500mm × Thickness 1200mm ■ Production period: 2 months *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hand Forklift-Compatible AGV Jig HF-CONNECT

Hand Forklift-Compatible AGV Jig HF-CONNECT

A new era of hand forklifts. If you're considering automated guided vehicles (AGVs), leave it to us.

The most requested item for transportation using Automated Guided Vehicles (AGVs) is pallet transport with hand forklifts. We have developed and started selling a fixture for AGVs that can tow hand forklifts. If you want to operate an AGV that transports palletized loads with a hand forklift, please feel free to consult us. 【Features】 ■ Hand forklifts can be attached and detached from the AGV with one touch ■ Maximum towing capacity of the key cart is 500 kg ■ Compatible with a wide variety of hand forklifts ■ Recommended for operations using hand lifts with AGVs ■ Moving from "transporting with hand forklifts" to "hand forklifts doing the transporting" *For more details, please refer to the external link page or feel free to contact us.

  • lift
  • Hand lift
  • forklift
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[For the industrial equipment industry] Case study of medium-sized precision sheet metal processing: 'Cleaning fixture'

[For the industrial equipment industry] Case study of medium-sized precision sheet metal processing: 'Cleaning fixture'

A manufacturing case that maximizes the opening to better agitate the cleaning solution.

We would like to introduce a case study of the cleaning jig manufactured by Nagasawa Koki Co., Ltd. Dimensions: 400*350*350mm. To better stir the cleaning solution, we maximized the openings. Our company specializes in thin sheet metal processing and strives to achieve high quality even with short lead times as a professional in precision sheet metal processing. 【Case Study】 ■ Product Name: Cleaning Jig ■ Dimensions (mm): 400*350*350 ■ Material: SUS304・2B t=1.5 ■ Surface Treatment: None ■ Standard Lead Time / Lot: 5 units / 10 days ■ Process Introduction: - Design, Programming, Punching, Deburring, Bending, Welding, Assembly *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
A case study of designing and manufacturing jigs through prototype cutting and assembly of plastic resin.

A case study of designing and manufacturing jigs through prototype cutting and assembly of plastic resin.

This is an introduction to a case where a "pallet jig" was manufactured using machining and assembly with MC nylon and POM!

At Takimoto Giken Kogyo, we have manufactured "pallet jigs" using MC nylon and POM through cutting processing and assembly. ~Points~ MC nylon (monomer cast nylon) is commonly used in areas requiring mechanical strength (impact resistance), and the material itself is readily available, making it versatile. In this case, the base was made of POM for color differentiation. We measure the pallet size and work size, checking for interference and accuracy rather than relying on physical matching. There are various shapes of pallets for industrial machinery related to the automotive industry, but our company handles everything from lathe processing to machining and assembly, bringing us closer to our customers' requests. Additionally, we use machining (Mori Seiki) CADCAM for speedy program creation and processing conditions. *If you have 2D data, please provide it. We also respond flexibly to various requests, such as payment conditions or the absence of drawings. *For more details, please download the PDF or feel free to contact us.

  • others
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fluororesin PTFE (Teflon) processing! Manufacturing of automotive and semiconductor-related jigs.

Fluororesin PTFE (Teflon) processing! Manufacturing of automotive and semiconductor-related jigs.

Even on holidays, the factory operates! We manufacture automotive and semiconductor-related jigs! We strive to accommodate requests regarding tolerances and distortions, considering the properties of the materials.

At Takimoto Giken Kogyo, we manufacture automotive and semiconductor-related jigs using fluoropolymer PTFE (Teflon) processing. Due to the properties of the material, it is often used in areas that are prone to chemical exposure because of its high chemical resistance. Our factory operates on weekends and holidays, and we can accommodate requests for necessary items after the holidays. By responding to short delivery times, we aim to minimize risks for our customers, such as missed arrangements or damage to jigs, which are often difficult to prevent. [About Our Processing] ■ NC Lathe Processing (Okuma) In small lots, we often process R-shaped designs that do not have standard products through NC processing, which does not incur tool costs unlike general-purpose machines. ■ Material For scientific and laboratory equipment, chemical resistance is often required, and since the precision requirements are not very strict, we frequently use PTFE (Teflon). PTFE (Teflon, Naflon, Valflon) is an excellent material for chemical resistance, but it has significant variations in dimensional tolerances, so we handle it with care as the dimensions can change simply by measuring it by hand during inspection. *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Processing inspection measurement jigs (check pins) with plastic resin!

Processing inspection measurement jigs (check pins) with plastic resin!

Since it is made of plastic resin, there is no need to worry about scratching the workpiece! We take the characteristics of the material into consideration and strive to accommodate requests regarding tolerances and distortions as much as possible.

At Takimoto Giken Kogyo, we process inspection measurement jigs (check pins and check blocks) using plastic resin. Because they are made of resin material, there is no worry about scratching the workpiece. In our company, we pay careful attention to processing from the cutting of materials to ensure that the check jigs for automotive-related industrial machinery have minimal tolerances, warping, and distortion. Additionally, we can produce small lots starting from one piece, and we can accommodate repeat orders from single items. By inspecting the difficulty of handling, we aim to reduce the defect rate and ultimately meet your requirements. 【About Our Processing】 ■ NC Lathe Composite Processing (Okuma) In cases where indexing processing is frequent, we use a 4-axis processing machine that does not require clamps or positioning jigs. ■ Material POM (Duracon, Polyacetal) is a well-balanced material among engineering plastics and is often compared to MC nylon due to its cost-effectiveness. ■ Inspection By inspecting the difficulty of handling, which does not show up in numbers, we aim to reduce the defect rate and ultimately meet your requirements. *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Positioning jig "Work Guide" processed with plastic resin!

Positioning jig "Work Guide" processed with plastic resin!

Produced with short lead times and low prices! We will accommodate processing that closely meets your requested conditions, considering the material characteristics such as tolerances, distortion, warping, and burrs.

At Takimoto Giken Kogyo, we process positioning jigs called "Work Guides" using plastic resin. By mounting and using the Work Guide as a base, we simplify the positioning of the workpiece. The "Work Guide" for industrial machinery related to the automotive sector often has relatively simple shapes, allowing for production with short lead times and low costs. [About Our Processing] ■ Machining (Mori Seiki) We use CADCAM to create programs and processing conditions with a sense of speed. (If 2D data is available, please provide it.) ■ Material MC Nylon (monomer cast nylon) is commonly used in areas requiring mechanical strength (impact resistance) and is generally easy to obtain, making it widely used. ■ Lead Time Depending on the processing shape and material, we can get as close as possible to your desired lead time. ■ Strengths Unlike metals, plastic resin materials are generally arranged in standard lengths, so there are not many manufacturers like ours that have a rich supply of materials. *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Metal mask implementation jig

Metal mask implementation jig

Introducing fixtures for assembly, such as for protecting against thermal damage to components and preventing component lifting!

At Meiko Tech Co., Ltd., we handle "implementation jigs." We offer a variety of products, including "transport carriers" that can be used for applications such as irregular shapes, thin materials, flexible transport, and individual substrate mounting, as well as "backup blocks" that can be ordered simultaneously with metal masks and "flow pallets." You can choose according to your application. 【Product Lineup】 ■ Transport Carriers - Resin Carrier / Magnet Carrier / Tension Carrier ■ Backup Blocks - Aluminum Block / Vacuum Pad Type ■ Flow Pallets - Standard Type / Bridge Countermeasure Type / Multi-Slide Type *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Column] On the Wall Treatment of Metal Masks

[Column] On the Wall Treatment of Metal Masks

Various technologies! An explanation of "wall treatment," including the basic reasons and types that require processing.

Wall surface treatment, as the name suggests, refers to "treating" the "wall surface." Here, the wall surface of the metal mask refers to the "opening wall surface." Applying physical or chemical treatment to the opening wall surface is referred to as treatment, and it is collectively called "wall surface treatment." In this column, we introduce various aspects of "wall surface treatment," including types and methods. Please take a moment to read it. 【Contents】 ■ What is wall surface treatment? ■ Why is wall surface treatment necessary? ■ Basic reasons why wall surface treatment is needed ■ Types of wall surface treatment ■ Methods of grinding (melting) ■ Methods of applying *For detailed content of the column, please refer to the related links. For more information, feel free to contact us.

  • others
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Column] How to Make a Metal Mask

[Column] How to Make a Metal Mask

Metal mask production contact point! We will introduce you from the acceptance of your provided data to packaging and shipping!

This column introduces "How to Create a Metal Mask." Metal masks are generally created from Gerber data, and various inspections are conducted until completion to maintain quality. Since we explain from the basics of metal masks, please take a moment to read it. 【Contents (partial)】 ■1. About Metal Masks (Overview) ■2. Acceptance of Provided Data (Verification, Suggestions, Estimates) ■3. Data Editing (Opening Correction, Conversion to Processing Data) ■4. Laser Processing ■5. Surface Polishing (Deburring, Dross Removal) *You can view the detailed content of the column through the related links. For more information, please feel free to contact us.

  • others
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Document] Anshin L-shaped Fixture <Construction Manual>

[Document] Anshin L-shaped Fixture <Construction Manual>

We provide a detailed explanation of the procedures for removing accessories such as "U-bolts"!

This document is the construction manual for the "Anshin L-shaped Jig" by Anshin Co., Ltd. In addition to listing products used such as "Anshin Earth Embankment Replacement Core Material" and "Square Anshin V3 50 Square," it provides detailed explanations of procedures such as "removal of attached 'U-bolts.'" It is a handy reference book for performing the work. Please make use of it. 【Contents】 ■ Products used ■ Construction procedures ■ Construction "removal" *For more details, please refer to the PDF document or feel free to contact us.

  • Vibration isolation, vibration control, and earthquake resistance construction
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Document] Anshin Maru Type Jig <Construction Manual>

[Document] Anshin Maru Type Jig <Construction Manual>

Using "M12/M16"! Introducing the procedures for "installation" and "removal".

This document is the installation manual for the "Anshin Maru-type Jig" by Anshin Co., Ltd. It includes step-by-step images for "installation" and "removal," along with explanations highlighting key points. It is designed to be a handy reference during work. Please take a moment to read it. [Contents] ■ Products Used ■ Installation "Installation" ■ Installation "Removal" *For more details, please refer to the PDF document or feel free to contact us.

  • Vibration isolation, vibration control, and earthquake resistance construction
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Product Construction Case] Anshin Co., Ltd.

[Product Construction Case] Anshin Co., Ltd.

Responding to requests such as being unable to drive anchors! Examples of earthquake countermeasures implemented.

We would like to introduce case studies of product installations by Anshin Co., Ltd. At Electronics Manufacturer A, we installed the "Anshin K Square Jig" and others on the second-floor production line, where anchors could not be installed but earthquake measures were desired. At Precision Equipment Manufacturer B, we installed the "Anshin R Square Jig" and others on large inspection equipment, aiming to maintain precision while implementing earthquake measures. At Medical Equipment Manufacturer C, we installed "Custom Jigs" and "Anshin Round Jigs" on a production line where dust generation is not allowed. Please refer to the attached PDF for more details. [Case Overview (Partial)] <Electronics Manufacturer A> ■ Installation Location: Production Line ■ Request: Earthquake measures are desired on the second floor where anchors cannot be installed ■ Installed Products: Anshin K Square Jig, Anshin R Square Jig, Anshin Easy A/B Plate *For more details, please refer to the PDF document or feel free to contact us.

  • Vibration isolation, vibration control, and earthquake resistance construction
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Live] Useful in Practice! The First Step of Plating - Startup and Jig Edition

[Live] Useful in Practice! The First Step of Plating - Startup and Jig Edition

You can ask questions in real time! 30-minute lecture from a 99-year-old company on September 22, 2021, at 4 PM.

Do you have any such experiences? "I learned about the technology of 'plating' and tried to implement it, but I don't know where to start or what to pay attention to." "I don't understand the reasons for the issues explained by the plating company." *This webinar is for beginners.*

  • RPA
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Kawanishi Manufacturing Co., Ltd. Business Overview

Kawanishi Manufacturing Co., Ltd. Business Overview

One-stop service from jig manufacturing to product processing! Parts accuracy is stable, and complex processing is also possible.

At Kawanishi Manufacturing Co., Ltd., we produce processing jigs in-house. By manufacturing processing jigs internally, we reduce costs and achieve stable product precision through concentric alignment. Additionally, we pursue automation for small to medium lots domestically, rather than focusing solely on large lots. We actively review our production lines, including the introduction of machinery and process management, and we continuously think about customer-oriented manufacturing. 【Business Activities】 ■ Material selection based on drawings ■ Jig production ■ Machining ■ Surface treatment ■ Inspection and delivery *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Reducing costs by producing processing jigs in-house.

Reducing costs by producing processing jigs in-house.

Complex processing that could not be realized is now possible! We would like to introduce the production of processing jigs carried out by our company.

Our company manufactures processing jigs in-house. We consider the processing jigs, which are essential for machining, and think about "what shape should they be?" and "what is the best way to use them?" when creating the jigs. Additionally, by carrying out both jig production and machining within the same company, we can stabilize the precision of the parts and enable complex machining that was previously impossible due to differing axes. 【Production Steps】 ■1. Material selection based on drawings ■2. Jig production ■3. Machining ■4. Surface treatment ■5. Inspection and delivery *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Data] Delivery Performance Table for Rebus Products

[Data] Delivery Performance Table for Rebus Products

We have compiled a table that includes the delivery destination, usage, rope diameter, drum width, and more!

This document is a delivery performance table for Rebus products. It includes a table listing delivery destinations, applications, rope diameters, drum widths, and more. We have delivery records with various companies. Please take a moment to read it. 【Contents】 ■ Delivery Performance List *For more details, please refer to the PDF document or feel free to contact us.*

  • others
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Production of Tools for Work Improvement

[Case Study] Production of Tools for Work Improvement

If you have issues such as not wanting to hold a beaker with one hand, we can create custom tools for you!

We would like to introduce a case study of "jig production for work improvement" that we conducted. There were concerns such as "I don't want to hold a beaker with one hand from a safety perspective" and "work efficiency is poor because women often perform the tasks." The image shows the jig we created based on these considerations. Please feel free to contact us if you have any inquiries. 【Case Overview】 ■Challenges - I don't want to hold a beaker with one hand from a safety perspective. - Work efficiency is poor because women often perform the tasks. *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Anzen K corner-type jig (corner/side)

Anzen K corner-type jig (corner/side)

Installed at the four corners of the object! Earthquake measures can also be implemented for shelves and lockers.

The "Anshin K Corner Type Jig (Corner/Side)" is a product that can be used on everyday objects such as parts shelves and lockers. It can accommodate equipment with no legs and flat bottoms, as well as objects with corner legs. Install the corner type of this product at the four corners of the target object, and use the side type at the connecting parts for installation. 【Specifications】 ■ Jig Dimensions: External dimensions 80mm x 80mm, Total length 50mm ■ Material: Stainless Steel (SUS304) ■ Compatible Gel: Anshin V3 50 square *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Leave the repair and maintenance of painted items to us!

Leave the repair and maintenance of painted items to us!

Please leave the repair and maintenance of old products to Harada Ironworks.

What the customer requested was our in-house jig. Unfortunately, the product had been used for many years, resulting in peeling paint and advancing rust. This jig was old, and there were no existing drawings, so new production would require time and budget. Therefore, we only performed modifications and repairs on the necessary parts, along with repainting. First, we removed the paint and rust using blasting (Type 1 surface preparation) and conducted surface treatment. After that, we applied a primer and topcoat, completing the product. This product measures 1500×1500 L=2500, and we used grid blasting, performing surface preparation according to SSPC SP-10. Additionally, we applied one coat of epoxy-modified alkyd resin primer and one coat of synthetic resin blended paint for the topcoat. The repair and modification took only four days. It took a bit longer due to the need to differentiate the painting of the main frame and the handrails and ladder, but we were able to accommodate the short delivery time. After blasting, the painted product became remarkably clean and its durability improved. Harada Ironworks Hiroshima Official Link

  • Rust Inhibitor
  • Special Construction Method
  • paint
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Leak test tool "COS-AIR" for use after connecting drainage piping.

Leak test tool "COS-AIR" for use after connecting drainage piping.

This is a product designed to be attached to the MD joint's COS-T for conducting leak tests using air pressure.

This is the testing method described in SHASE-S 206 (Standards for Water Supply and Drainage Sanitary Equipment and its Commentary).

  • others
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Improvement Results] Developed a dedicated inspection jig.

[Improvement Results] Developed a dedicated inspection jig.

An example of creating two types of jigs with upper and lower dimension limits tailored to specific usage purposes!

We would like to introduce the achievements regarding the development of dedicated inspection jigs for a machinery manufacturer, which led to improved quality. At this manufacturer, dimensions at specified locations in the drawings were measured during part inspections, using accepted products; however, there were frequent defects. After improvements were made, inspection time was reduced, and with the enhancement of the inspection system, defects due to the same issues from the production line were eliminated. 【Summary of Achievements】 ■Challenges - Inspectors did not fully understand the intended use, and calipers could not accurately capture the shape, leading to incorrect inspections. ■Results - 70% reduction in inspection time - Reduction of wasted time due to part replacements *For more details, please download the PDF or feel free to contact us.

  • others
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to jig

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.