Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
181～195 item / All 196 items
This is a product designed to be attached to the MD joint's COS-T for conducting leak tests using air pressure.
This is the testing method described in SHASE-S 206 (Standards for Water Supply and Drainage Sanitary Equipment and its Commentary).
![[Improvement Results] Developed a dedicated inspection jig.](https://image.www.ipros.com/public/product/image/250/2001512771/IPROS9352767331849628592.png?w=280&h=280)
An example of creating two types of jigs with upper and lower dimension limits tailored to specific usage purposes!
We would like to introduce the achievements regarding the development of dedicated inspection jigs for a machinery manufacturer, which led to improved quality. At this manufacturer, dimensions at specified locations in the drawings were measured during part inspections, using accepted products; however, there were frequent defects. After improvements were made, inspection time was reduced, and with the enhancement of the inspection system, defects due to the same issues from the production line were eliminated. 【Summary of Achievements】 ■Challenges - Inspectors did not fully understand the intended use, and calipers could not accurately capture the shape, leading to incorrect inspections. ■Results - 70% reduction in inspection time - Reduction of wasted time due to part replacements *For more details, please download the PDF or feel free to contact us.
Even though we are using high-performance measuring equipment, we cannot obtain the necessary "measurement data"... it might be due to the jig!
Even if you are using it in the correct way, if you are experiencing issues such as not getting measurement results or poor accuracy, why not reconsider the "jig" first? No matter how high-performance the measuring equipment is, if it is not used in the appropriate manner, you will not be able to achieve the desired results. We will listen to the measurement data you need and create a measurement system using suitable measuring instruments or custom jigs. We will maximize the performance of the measuring instruments and realize efficiency in research, development, and production processes.
![Steel Frame Construction Adjustment Tool 'ATOMU-701' [Greatly Active at Construction Sites!]](https://image.www.ipros.com/public/product/image/665/2000312051/IPROS4672618697774688272.jpg?w=280&h=280)
A tool that brings innovation to steel frame construction! ATOMU-701
With ATOMU-701, the wire ropes and lever blocks necessary for correcting distortions in conventional methods are no longer required, significantly improving the availability of workspace and safety. It also leads to a reduction in drilling processes. ■ Smooth attachment and detachment ■ Easy correction of misalignment ■ Vertical level correction is possible ■ Waiting for alignment is possible For more details, please download the catalog or feel free to contact us!
![[Case Study] Jig for Transporting Electronic Components](https://image.www.ipros.com/public/product/image/ed0/2000624141/IPROS97769616579625749588.png?w=280&h=280)
A must-see for the crystal device industry! We also accept inquiries regarding poor workability and the lack of identifiable areas for improvement.
We would like to introduce a case study on solving issues related to "jigs for transporting electronic components." This product is a jig used in the manufacturing process of electronic components, specifically for transporting parts to the next process during production. However, the magazine (made of SUS material) used to set the device was heavy, causing part-time workers to develop tendonitis. As a solution, we conducted interviews and proposed a material change, resulting in a reduction of weight by half, which alleviated the tendonitis and improved work efficiency. We also welcome inquiries regarding poor work efficiency where no improvement points are apparent. Please feel free to contact us if you need assistance. 【Case Overview】 ■ Product: Jig for transporting electronic components ■ Issue: The magazine (made of SUS material) used to set the device was heavy, causing part-time workers to develop tendonitis ■ Benefits: Weight was reduced by half, alleviating tendonitis and improving work efficiency *For more details, please refer to the PDF document or feel free to contact us.
![[Column] On Face-to-Face Interaction](https://image.www.ipros.com/public/product/image/3ad/2001092011/IPROS47151692356483275952.jpeg?w=280&h=280)
In the production of metal masks, it is inseparable! An explanation of 'face viewing' and 'the difficulty of judgment.'
In this column, we will introduce "men-shi" (face view). The term that is inseparable from the production of metal masks is "men-shi." This word "men-shi" is likely not found in just any dictionary, and this time we will explain "men-shi" and the difficulties of "men-shi judgment." [Contents] ■ What is men-shi? ■ What are "frontal view" and "transparency"? ■ What is Gerber data? ■ Making men-shi judgments based on the information received is what being a professional is all about! *For detailed content of the column, please refer to the related links. For more information, feel free to contact us.
It can be used for conveyor line turntables and large jigs.
● Strong against eccentric loads and capable of handling heavy loads ● Rotational accuracy: shaft runout within 1.5mm, surface runout within 2.0mm ● Easy to assemble. Both the upper and lower frames can be processed with drilled holes and tapped holes. ● Friction resistance is less than 1.5% of the maximum load (this range does not apply when the load is too light). ● Slim frame height: 50mm
A tool that brings innovation to steel frame construction! ATOMU-701
With ATOMU-701, the wire ropes and lever blocks necessary for correcting distortions in conventional methods are no longer required, significantly improving the workspace and safety. It also leads to a reduction in drilling processing. ■ Smooth attachment and detachment ■ Easy correction of misalignment ■ Vertical level correction is possible ■ Waiting for alignment is possible For more details, please download the catalog or feel free to contact us!
![Steel Frame Construction Adjustment Tool 'ATOMU-701' [Improved Safety!]](https://image.www.ipros.com/public/product/image/2f6/2000312722/IPROS4672618697774688272.jpg?w=280&h=280)
A fixture that brings innovation to steel frame construction! ATOMU-701
With ATOMU-701, there is no need for wire ropes, lever blocks, and other equipment required for correcting distortions in conventional methods, significantly improving the workspace and safety. It also leads to a reduction in drilling processes. 【Features】 ■ Improved Safety! - Reduced high-altitude work and secured workspace - No risk of falling as fixtures are secured with through bolts - Wireless operation eliminates tripping and snagging accidents - Fall prevention ■ Shortened Construction Period! - Eliminating the need for wire and lever block installation during construction saves time - No need for temporary bolts and plates reduces construction time - Reduces the time until crane release during construction - Streamlining construction efficiency leads to a shorter construction period ■ Cost Reduction! - No need for wire and lever blocks - No need for distortion pieces - Reduced number of workers during construction - Reduction in personnel due to shortened construction period - No need for temporary bolts and splice plates * For columns exceeding 20 tons, please install additional lifting pieces separately. For more details, please download the catalog or feel free to contact us!
Optimal for hydraulic testing fixtures for high-density PE pipes (ISO)! Easy to attach and detach, and can be reused!
In this document, we will introduce the most suitable fittings for high-density PE pipes (ISO outer diameter products) as water pressure testing jigs. Since the installation is a mechanical connection, it can be performed immediately after cutting the pipe without the need for specialized fusion machines, clamps, generators, or other equipment, and is not affected by site conditions such as water locations or weather. Additionally, after being used as a water pressure testing jig, it can be easily removed from the pipe, allowing for reinstallation, making it the optimal fitting for conducting water pressure tests.
Optimal for hydraulic testing fixtures for high-density PE pipes (JIS outer diameter)! Easy to attach and detach, and can be reused!
In this document, we will introduce the most suitable fittings for water pressure testing jigs for high-density PE pipes (JIS outer diameter products). Since the installation is a mechanical connection, it can be performed immediately after cutting the pipe without the need for specialized fusion machines, clamps, generators, or other equipment, and is not affected by site conditions such as water areas or weather. Additionally, after being used as a water pressure testing jig, it can be easily removed from the pipe, allowing for reinstallation, making it the optimal fitting for conducting water pressure tests.
Quality improvement and cost reduction! A revolution in liner (sheet) adjustment work!
The "Anchor Integrated Liner" is a fixture developed to perform liner adjustment tasks used in conventional machine installation centering work quickly, cheaply, and accurately. The total installation cost is reduced to below 50%. 【Features】 - Due to its screw mechanism, centering work of 1/1000 to 5/100 becomes easier. - Based on liner theory, the force relationship is calculated. - Installation accuracy can be secured at a technical level that surpasses that of skilled workers. - The construction cost, including the liner fee, is significantly reduced. For more details, please contact us or download the catalog.
![[Column] Progress on New Product Development](https://image.www.ipros.com/public/product/image/778/2000734904/IPROS35571942931688519529.png?w=280&h=280)
Introducing the new product compared to the conventional 30mm thick aluminum frame combination type metal mask!
In this column, we introduce the progress of new product development. We present the new products while comparing them to the conventional space-saving metal masks. We hope that our lineup of space-saving metal masks can help solve your challenges, even if just a little. Please take a moment to read it. [Contents] ■ Storage space for metal masks ■ Advantages and disadvantages of each space-saving metal mask product ■ Future schedule for new products *For more detailed information about the column, you can view it through the related links. Please feel free to contact us for more details.
![[Column] About Implementation Jigs](https://image.www.ipros.com/public/product/image/361/2001092009/IPROS08678397127230629819.jpeg?w=280&h=280)
Fixtures related to substrate implementation! Explanation of types, uses, and production.
In this column, we will introduce "jigs for implementation." "Jig" is also referred to as "JIG" in English (it seems the origin is from English!), making it a universal term. Among various jigs, this time we will focus on jigs related to PCB assembly. If you are wondering why we are discussing jigs in a thorough explanation of metal masks, please continue reading. 【Contents】 ■ What is a jig? ■ Types and uses of jigs in the PCB assembly process ■ Production of jigs *You can view the detailed content of the column through the related links. For more information, please feel free to contact us.
![[Column] About Surface Mount Technology (SMT)](https://image.www.ipros.com/public/product/image/b27/2001092030/IPROS62478647518517074994.jpeg?w=280&h=280)
What is "Surface Mount Technology (SMT)" in the first place! An explanation of the processes and the future of the market.
In this column, we will introduce "Surface Mount Technology (SMT)." Wait, isn't surface mount just "printing," "component placement," and "reflow"? You might be thinking that! Actually, in writing this article, I did some research and asked around, and I found some interesting insights. Additionally, during the new graduate sales training at Meiko, K-san proudly mentioned, "I visited the Meiko Vietnam assembly factory!" (laughs), so I would like to write about how surface mount technology (SMT) appeared from the perspective of a liberal arts new graduate. [Contents] ■ What is "Surface Mount Technology (SMT)" in the first place? ■ The future of the surface mount technology market ■ The PCB assembly industry led by Japanese manufacturers ■ The processes involved in surface mount technology (SMT) *For more details on the column, you can view it through the related links. Please feel free to contact us for more information.
