inspection Product List and Ranking from 141 Manufacturers, Suppliers and Companies

Clear reporting with data images! Digital Radiography (DR) examination.

Non-destructive testing of internal structures of cast steel products, etc. By utilizing DRT, reports that were previously on film can now be done with data images!

Our company uses IP (Imaging Plate) media as a substitute for traditional film and actively utilizes methods employing DRT to inspect the internal structures and conditions of concrete structures, piping, cast steel products, and more. We can now provide imaging data in place of film. One of the features of this device (FUJIFILM Dynamix HR2) is that it allows inspection of objects with significant thickness differences in a single shot, thereby reducing inspection time. **Features of inspections using this device (FUJIFILM Dynamix HR2):** - Analysis and measurement using dedicated software - Density correction is possible - Can inspect objects with significant thickness differences in a short time - Clear reporting through images *For more details, please refer to the PDF materials or feel free to contact us.*

Company：大検本社
Price：Other

Other analytical equipment
Non-destructive testing
others
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PCB oil removal and same-day inspection

Nationwide support for those troubled by PCB-related issues. We offer same-day inspection and certificate issuance from oil extraction to removal and disposal, as well as new installation, providing a comprehensive proposal.

We can handle everything from the substation to the equipment inside the cubicle. We also accommodate wipe tests for high concentration, low concentration, and trace amounts of PCBs. Inspection results can be reported in as little as 2 hours. In the event that PCBs are detected, we can also conduct re-inspections. After re-inspection, we can provide various proposals from high concentration to low concentration, low concentration to trace amounts, and from trace amounts to decontamination. Please do not incur excessive costs for PCBs.

Company：Ｐerfect Install Corporation
Price：Other

Special Construction Method
Environmental Survey
Electrical Equipment Testing
inspection

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Microscopic examination

We conduct inspections using a microscope, such as cross-sectional observation and checking for peeling.

Microscopic examination involves using a microscope to check membrane thickness through cross-sectional observation and to confirm the condition of peeling from surface and cross-sectional observations. We have introduced high-precision analysis equipment to conduct surface analysis of products and analyses for quality control, among other technical research tasks. Please contact us for more details.

Company：コーエキ
Price：Other

Other analytical equipment
others
inspection

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water quality analysis, bacterial testing

We also handle testing for Cryptosporidium and Legionella species!

Small creatures that cannot be seen with the naked eye... microorganisms. Their existence cannot be confirmed without conducting tests. At Naito Environmental Management Co., Ltd., we conduct various microbiological tests in accordance with laws and regulations. Please use our services for hygiene management of facilities. We also provide testing for Cryptosporidium and Legionella, which are problematic waterborne pathogens. Even for the same test items, the testing methods may vary depending on the applicable laws and regulations. For more details, please contact us or refer to our catalog.

Company：内藤環境管理
Price：Other

Other Management Services
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water quality analysis - Legionella species testing (bathtub water, humidifiers, cooling towers, etc.)

Legionella: As short as 10 business days!

Legionella bacteria are pathogens that cause an infection known as Legionnaires' disease when they infect humans. In nature, they are found in small amounts in soil and freshwater, but the likelihood of direct infection from these sources is almost nonexistent. However, conditions in places like baths and cooling towers are conducive to the proliferation of Legionella bacteria, so even a small aerosol (water spray) may contain a large number of Legionella bacteria, which can lead to infection when inhaled. Legionnaires' disease is an infection that occurs when aerosols contaminated with Legionella bacteria are inhaled into the body. Its symptoms can be broadly categorized into Legionella pneumonia and Pontiac fever, which is a febrile illness similar to influenza. Additionally, there have been reports of rare symptoms such as inflammation due to skin contact. Special caution is needed for the elderly, patients with weakened immune systems, and infants who are inherently immunocompromised. Legionnaires' disease is classified as a Category IV infectious disease under the Infectious Disease Control Law, and physicians who diagnose it are required to report it immediately to the health department. For more details, please contact us or refer to the catalog.

Company：内藤環境管理
Price：Other

Other Management Services
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water Quality Analysis: Water for Dialysis

Testing of chemical contaminants: 12 items of dialysis water quality standards.

The international standard for the management of dialysis water (ISO 13959) specifies 22 items related to chemical contaminants as management items. In Japan, the Japan Society for Dialysis Therapy and the Japan Association of Clinical Engineers have presented the "Dialysate Water Quality Standards" as criteria for the management of dialysis water. According to the Dialysate Water Quality Standards, 12 out of the 22 chemical contaminants are designated as management targets, and they are to be maintained below the management standard values (maximum concentrations) under the supervision of the Dialysis Equipment Safety Management Committee.

Company：内藤環境管理
Price：Other

Other Management Services
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Presentation of Case Studies] Non-Destructive Testing Industry-Specific Case Study Collection

Introducing useful inspection case studies from various industries such as steel, electricity, and electronics! Many railway manufacturers like Shinkansen and major automobile manufacturers have adopted our solutions.

The inspection targets of "non-destructive testing equipment" range from steel and automotive parts to roads, railways, aircraft, and even rockets. Our non-destructive testing equipment is used in renowned manufacturing sites across the country, demonstrating its effectiveness in clarifying the causes of accidents and preventing their recurrence. Currently, as companies are reassessing the necessity of inspection equipment, non-destructive testing is expected to see an increase in demand in the future. This document features useful inspection case studies from various industries related to non-destructive testing, provided by Daiya Electronic Applied Co., Ltd., a specialist group that offers custom inspection equipment and automation devices specializing in ultrasonic, X-ray, and eddy current testing. We also provide products tailored to our customers' applications and needs. Please feel free to contact us. [Contents] ■ Industry-specific inspection case studies ■ Major delivered inspection projects ■ Key client companies [Case Studies] ■ Automotive and construction machinery ■ Steel ■ Power, gas, and petrochemicals ■ Ships, bridges, and steel structures ■ Non-ferrous metals and railways ■ Electrical and electronics ■ Non-metals and construction materials ■ Others

Company：ダイヤ電子応用
Price：Other

Non-destructive testing
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Improving Work Efficiency!] Custom Production of Marking Pens [Examples Available]

A quick-drying marker pen that is resistant to peeling and transfer! It dries immediately after writing, so you can stack products without worry! Custom-made to suit the writing material!

Did you know that by customizing the commercially available marking pens (markers) you commonly use in your work (drying speed, film strength, pen tip, body, ink color) to your desired specifications, you can create an astonishingly stress-free working environment? If you regularly use markers, please take a look at our production examples. You might find some hints for improvement! 【Customer Challenges】 ◆ I want a quick-drying marker that won't dry out even when the cap is left open for a long time. ◆ I want a marker with a strong tip that can be continuously used for point marking when attached to a machine. ◆ I want a pen that can write on a car's windshield outdoors, even when exposed to rain. ◆ I want a marker that can write on rigid PVC pipes without transferring when stacked immediately. *You can view development examples that solved these challenges in our PDF materials.

Company：寺西化学工業
Price：Other

paint
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What is inspection AI that contributes to the automation of visual inspections? [Free handbook available]

Automate visual inspections with easy operation! An AI appearance inspection solution that can be easily customized! We are currently offering a free summary of basic knowledge that is easy to understand.

Our company offers an AI visual inspection solution that allows for the easy and low-cost implementation of appearance inspections using AI technology and computers. By automating inspections (such as scratches, dirt, and foreign object contamination) that were previously done visually, we address issues such as labor shortages, lack of successors, and variations in accuracy. Currently, we are offering free basic knowledge materials on "What is visual inspection?" and application materials. [Content Highlights (excerpt)] - Basic visual inspection items - An example of visual inspection - Current and past status of the manufacturing and FA industry - Challenges of visual and appearance inspections - Applied solutions We provide a total solution that includes proposals for necessary equipment from the steps of implementing AI visual inspection, as well as recommendations for AI development operation PCs unique to PC manufacturers. *For more details, please refer to the PDF materials or feel free to contact us.

Company：アプライド
Price：Other

Other Software
others
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Lumitester smart ATP test for food inspection

Where are microorganisms hiding? Quantify the cleanliness after washing and use it for the detection, indexing, and monitoring of microorganisms.

ATP exists in all living organisms (cells). Of course, it is also found in microorganisms (excluding viruses). Therefore, it does not necessarily originate only from microorganisms. Generally, the amount of ATP is an indicator of contamination, and a higher value indicates a higher likelihood of the presence of microorganisms. Measuring ATP does not immediately reduce risk. By conducting tests to determine the amount of ATP, one can understand the level of contamination, that is, the potential presence of microorganisms, which can lead to risk reduction through disinfection and sterilization products. *This is not a device for microbial testing (culturing and identification) or for counting bacteria. *This is not a device that identifies specific microorganisms. Iida Trading Co., Ltd. https://www.ipros.jp/product/detail/2000586005

Company：フライブルグ昭島本社
Price：10,000 yen-100,000 yen

Environmental Survey
Other analytical equipment
Other office supplies
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Lumitester/ATP test Easy 10-second test

Where are microorganisms lurking? Quantify the cleanliness after washing and use it for the detection, indexing, and monitoring of microorganisms.

ATP exists in all living organisms (cells). Of course, it is also present in microorganisms (excluding viruses). Therefore, it does not necessarily originate solely from microorganisms. Generally, the amount of ATP is an indicator of contamination, and a higher value suggests a greater likelihood of microbial presence. Measuring ATP does not immediately reduce risk. By conducting tests to determine ATP levels, one can understand the degree of contamination, which means assessing the potential presence of microorganisms, leading to risk reduction through disinfection and sterilization products. *This is not a device for microbial testing (culturing and identification) or for counting bacteria. *This is not a device that identifies specific microorganisms. Ieda Trading Co., Ltd. https://www.ipros.jp/product/detail/2000586005

Company：フライブルグ昭島本社
Price：10,000 yen-100,000 yen

Environmental Survey
Other analytical equipment
Other office supplies
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-destructive testing of products

Enhance reliability and ensure safety! Achieve inspections with in-house developed high-speed image processing technology and analysis algorithms.

On this homepage, we introduce the "Non-Destructive Product Inspection" handled by Enter System Co., Ltd. Non-destructive testing enhances the reliability of products and equipment and ensures safety by conducting inspections during the processing stages and on finished products, as well as inspecting equipment. Our company realizes these inspections using a single computer to control machinery and perform data sampling, thanks to our self-developed high-speed image processing technology and analysis algorithms. Please take a look at our company website. 【Features】 ■ Inspection of processing stages and finished products, as well as equipment inspection ■ Enhancing the reliability of products and equipment to ensure safety ■ Self-developed high-speed image processing technology and analysis algorithms ■ Realizing inspections from machine control to data sampling with a single computer *For more details, please refer to the PDF materials or feel free to contact us.

Company：エンターシステム
Price：Other

Non-destructive testing
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Attention Quality Control Personnel! Achieve without Jig Creation! Printed Circuit Board Electrical Inspection

Many successful implementations! Tester for PCB inspection using flying probe method! Trial available! Easy to operate!

Conventional jig-type (press-type) circuit board inspection devices require significant effort and cost to create and store pin board type jigs, leading to high running costs. The 'Flying Probe Method' circuit board inspection tester developed by Takaya, the first in the world, employs a system where a robotic arm makes contact with the inspection points using probes (test needles). There is no need for jig creation costs. Additionally, specialized knowledge is not required to create inspection programs, allowing for immediate response to circuit changes. By utilizing it for establishing and verifying production data for mass production, such as solder printing and reflow temperature management, it enables high-quality manufacturing from the prototype level. There are also cases where it has been used for mistake checks in rework of added components or component replacements. We welcome inquiries for trials/tests. Please feel free to contact us. <Recommended for those who:> - Want to reduce running costs of jig-type tester inspections while increasing accuracy - Require electrical inspection for a variety of small-lot circuit boards - Wish to conduct electrical inspections without specialized knowledge of circuit design *Detailed information can be found in the catalog.*

Company：タカヤ
Price：Other

Measurement and Inspection
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Product analysis: Performance testing of water treatment chemicals.

We are conducting evaluation tests and quality tests for water treatment chemicals!

In the water purification process at facilities such as water treatment plants, there are standards in place to ensure that the chemicals injected into the water do not contain impurities that exceed specified limits, which could adversely affect the quality of tap water. The substances in question include coagulants like polyaluminum chloride and disinfectants such as sodium hypochlorite, with testing items established according to the type of chemical. Naito Environmental Management Co., Ltd. conducts evaluation tests for water treatment chemicals based on guidelines from the Ministry of Health, Labour and Welfare and standards from the Japan Water Works Association, as well as quality tests based on Japanese Industrial Standards and Japan Water Works Association standards. For more details, please contact us or refer to our catalog.

Company：内藤環境管理
Price：Other

Other Management Services
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Food inspection (residual pesticide testing / nutritional component analysis)

Low price, short delivery time, high quality! Helping to solve customer problems to provide safe and secure food!

"Food Inspection" leverages its strengths as an inspection organization to provide consistent support from inspection to consulting. In "Pesticide Residue Testing," we can perform analyses tailored to customer requests, utilizing advanced analytical techniques and extensive analytical experience. This service is recommended for foods with unknown pesticide usage history and imported foods. Additionally, "Nutritional Component Analysis" is conducted using analytical methods based on nutritional labeling standards. We offer a cost-effective testing package compliant with food labeling laws, so please feel free to contact us when needed. [Features] ■ A trusted and proven inspection organization ■ High-precision testing with new equipment ■ Reliable test results delivered through excellent technical capabilities ■ 65 years of rich experience and knowledge ■ Consistent support from inspection to consulting *For more details, please refer to the PDF materials or feel free to contact us.

Company：日吉
Price：Other

Other Management Services
Measurement and Inspection
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Beverages, mineral water, and food manufacturing water testing.

Total support for creating a safe and hygienic environment! Responding with high-quality services and expertise.

Our company offers testing for "soft drinks, mineral water, and water for food manufacturing." On June 29, 2021, the analysis items and standard values for soft drinks and mineral water were revised, leading many companies to conduct water quality tests at least once a year to ensure the safety and security of their food products. Hiyoshi is a registered hygiene testing organization, and hygiene guidance is provided by HACCP coordinators. In addition, we also offer analyses such as "radiation testing," "heavy metal analysis in food," and "51-item water quality testing under the Water Supply Act." Please feel free to contact us for more details. [Overview] ■ Soft drinks: 5-item component standard testing / 46-item manufacturing standard testing ■ Mineral water: 47-item component standard testing ■ Water for food manufacturing: 26-item water quality testing based on the Food Sanitation Act *For more details, please refer to the PDF document or feel free to contact us.

Company：日吉
Price：Other

Measurement and Inspection
Other Management Services
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Improving Work Efficiency!] Custom Production of Marking Pens [Examples Available]

Moisture-resistant marker pen! Even if it gets wet, you can easily blow on it and continue writing! After writing, if it's no longer needed, it can be removed cleanly without leaving any residue!

Did you know that by customizing the commercially available marking pens (markers) you commonly use in your work (drying speed, film strength, pen tip, barrel, ink color) to your desired specifications, you can create an astonishingly stress-free working environment? If you regularly use markers, please take a look at our production examples. You might find hints for improvement! 【Customer Issues】 ◆ I want a quick-drying marker that won't dry out even when the cap is left open for a long time. ◆ I need a marker with a strong tip that can be attached to a machine for continuous point writing. ◆ I want a pen that can write on a car's windshield outdoors, exposed to rain. ◆ I need a marker that can write on rigid PVC pipes without transferring when stacked immediately. *You can view development examples that solved these issues in our PDF materials.

Company：寺西化学工業
Price：Other

paint
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water Quality Inspection AI【Deep Inspection Liquid】

AI will monitor water quality tests that humans have conducted visually. It enables 24-hour real-time monitoring of suspended particles, bubbles, and wave conditions through cameras.

Water used in industrial sectors must be properly treated within facilities to meet the discharge standards set by the government. Wastewater treatment facilities installed in production sites such as factories are designed to operate 24 hours a day, 365 days a year, and the assessment of treatment conditions is often conducted visually by operators at regular intervals. "Deep Inspection Liquid" aims to detect abnormalities in water quality (such as the occurrence of suspended solids, bubbles, and changes in color) in real time by placing fixed-point cameras in water treatment facilities. Please feel free to contact us. 【Features】 ■ 24-hour monitoring system powered by AI ■ Flexible monitoring system tailored to the on-site environment ■ Prevention of subjective judgment *For more details, please refer to the PDF materials or feel free to contact us.

Company：Rist
Price：Other

Security cameras and surveillance systems
Water quality/pH measuring device
Measurement and Inspection
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-destructive material inspection

New materials are also included! Inspection is achieved through high-speed data processing technology, high-speed image processing technology, and analysis algorithms.

On this homepage, we introduce "non-destructive material inspection" handled by Enter System Co., Ltd. In addition to common steel and non-ferrous metals, new materials such as titanium, ceramics, and CFRP are also included. Material inspection includes online inspection conducted in real-time during the material production process and physical property testing during material development. Our company realizes these inspections through high-speed data processing technology installed in dedicated hardware, as well as our own developed high-speed image processing technology and analysis algorithms. Please take a look at our website. 【Features】 ■ New materials such as titanium, ceramics, and CFRP are included ■ There are online inspections and physical property tests during material development ■ High-speed data processing technology installed in dedicated hardware ■ Our own developed high-speed image processing technology and analysis algorithms *For more details, please refer to the PDF materials or feel free to contact us.

Company：エンターシステム
Price：Other

Non-destructive testing
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

inspection Product List and Ranking from 141 Manufacturers, Suppliers and Companies | IPROS

inspection Manufacturer, Suppliers and Company Rankings

inspection Product ranking