Last Updated： Aggregation Period:Aug 13, 2025～Sep 09, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 13, 2025～Sep 09, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 13, 2025～Sep 09, 2025
This ranking is based on the number of page views on our site.
46～60 item / All 80 items
Installation and work flexibility greatly increased with airless operation! Automatic one-handed setting of blind rivets dramatically boosts productivity and work efficiency!
- Easy automatic rivet supply - Achieves stable rivet supply of more than one every three seconds! - Operates solely on electricity, contributing to energy savings!
We will solve all your concerns at once, such as worries about blockages in dust collectors and cooling towers, the dust collection system, and wanting to keep the building height low.
The Circle Feeder CFD has a unique discharge principle that provides a bridge suppression effect, allowing for stable discharge of dust. Standard specification: N type (dust temperature below 80°C) Heat-resistant air-cooled specification: HA type (dust temperature below 250°C) Heat-resistant water-cooled specification: HW type (dust temperature below 360°C)
Please use the circle feeder rental service.
Many benefits of renting, such as pre-confirmation of effectiveness, introduction of test plants, various needs, and effective use of equipment budgets! With rental equipment, you can conduct satisfactory test confirmations. More reliable capital investment is possible. Respond to sudden demand. Timely equipment maintenance is possible. Rental costs do not require expense processing, maintenance costs, or asset taxes for equipment.
It is a feeder that can widely accommodate powders, granules, and bulk materials with low remaining quantities.
The disk feeder is a feeder capable of handling powders, granules, and bulk materials, achieving high supply accuracy with stable quality and minimal fragmentation. The disk feeder has further realized high supply accuracy without pulsation while leveraging the technology of the circle feeder, which has a proven track record in supplying difficult-to-discharge materials.
It contributes to stable operation of storage equipment by suppressing segregation and bridging through mass flow. The circle feeder is a registered trademark in over 30 countries worldwide.
The stored powder is discharged without segregation by mass flow (first in, first out) due to the unique structure of the circle feeder, ensuring a uniform quality for the next process. Additionally, it excels in preventing bridging, making it suitable for powders and granules with strong bridging characteristics. The circle feeder can accommodate a wide range of physical properties, from powdery to lump forms, guaranteeing stable supply. It has been used in over 20 countries worldwide, with a cumulative production of more than 7,000 units.
Supports over 1200 types of difficult-to-discharge materials! Stable supply of materials with strong bridging properties, as well as sludge, viscous soil, easily entangled fibrous and cotton-like materials, and from granular to lump forms.
Yoshikawa has been developing its business with the constant aim of "creating things that are useful to society" for over 60 years since its founding. Among our achievements, the "Circle Feeder," with over 9,000 units sold, can be considered a savior in the field of bulk material supply, having solved numerous problems related to storage and supply. The "Circle Feeder" works effectively with any type of raw material, especially those that are difficult to discharge. It also features technology that eliminates segregation through mass flow functionality. We work together with our customers to tackle problems and assist in equipment improvements with Yoshikawa's unique technology. At Yoshikawa, we offer a variety of products tailored to the raw materials you wish to supply. If you are interested in our products, please feel free to download the PDF, visit our external link page, or contact us directly.
General-purpose parts feeder with parts feeder + vision system + robot.
A new parts feeder using a feeder + vision system. Eliminates feeder jams and significantly reduces downtime. ◉ Traditionally, one parts feeder is required for each type of part, but with the "Vision Feeder," multiple parts can be mixed with just one unit. ◉ We have independently developed a robot motion program that works in conjunction with a work identification vision system. ◉ By incorporating image processing signals from the vision system and utilizing arc conveyor tracking technology, we send motion commands to the robot, achieving stable picking of the workpieces. As a result, a single parts feeder can handle a wide variety of workpieces. A feeder that does not jam. ★ For more details, please refer to the catalog or product list on our website. ★ We also offer trials at our factory. Please feel free to contact us.
Universal parts feeder using parts feeder + vision system + robot.
A new parts feeder using a feeder + vision system. Eliminates feeder jams and significantly reduces downtime. ◉ Continuous stable feeding with automatic rejection of defects resolves downtime caused by misfeeding. ◉ Traditionally, one parts feeder was required for each type of part, but the 'Vision Feeder' can handle multiple parts with just one unit. By incorporating image processing signals from the vision system and utilizing arc conveyor tracking technology, commands are sent to the robot, achieving stable picking of workpieces. This allows for the supply of a wide variety of workpieces with a single parts feeder. A feeder that does not jam. ★ For more details, please check the catalog or product list on our website. ★ Trials can also be arranged at our factory. Please feel free to contact us.
Automatic correction of output errors due to temperature changes by temperature sensors!
Digital load cells incorporate an amplification section, A/D conversion section, and microcontroller into the load cell body, enabling direct output of digital signals. By adopting a digital method, they have evolved into high-cost performance information terminals as "mass and force sensors" with higher precision and stability. An internal temperature sensor automatically corrects output errors caused by temperature changes. Additionally, the realization of an internal resolution of 4.19 million counts (approximately four times that of conventional models) has improved measurement accuracy. Analog load cells, which exchanged weak voltage signals between the load cell and indicator, had a structure that was susceptible to noise. In contrast, digital load cells output digital signals directly, making them less affected by noise and capable of long-distance transmission. Since the mass value is in digital signal form, only the setting values need to be input when replacing the controller, eliminating the need for adjustments with weights as required by analog load cells. For more details, please contact us or refer to the catalog.
Wide flow range with low flow rate and high precision supply. Major components can be disassembled without tools!
The "CE-W-0" two-axis screw type cassette weighing feeder for continuous constant flow supply of powdered and granular materials such as food and plastic raw materials offers a wide flow range with low flow and high precision. Major components can be disassembled without tools, and the residual amount during full discharge is minimal, making cleaning easy. Suitable materials include additives, dyes, pigments, fillers, resin pellets, and other powdered and granular materials. The flow range is 0.05 to 50 L/h, hopper capacity is 10 L, weighing capacity is 5 kg, and the power supply is AC 200V single-phase 1.1 kVA. For more details, please contact us or refer to the catalog.
Achieving weight reduction of the main unit through compactization!
The "CE-W-1 to 4" two-axis screw type cassette weighing feeder for continuous constant flow supply of powdered and granular materials such as food and plastic raw materials can be disassembled into major components without tools (in less than one minute). It has a low residual amount during full discharge, making cleaning easy. Its small footprint allows for easy layout. The compact design achieves a lightweight main body. The screw and agitator are independently driven. Suitable materials include resin pellets, resin powder, calcium carbonate, talc, fluff, glass fiber, and carbon fiber. The hopper capacity ranges from 25L to 200L, the weighing capacity is from 30kg to 200kg, and the power supply is either AC200V single-phase 1.8kVA or AC200V single-phase 3.6kVA. For more details, please contact us or refer to the catalog.
Achieve continuous constant flow supply with minimal pulsation! Easy disassembly with one-touch clamp.
The "CE-T" two-axis screw-type cassette weighing feeder for continuous constant flow supply of powdered and granular materials such as food and plastic raw materials achieves a continuous constant flow supply with minimal pulsation. The main components can be easily disassembled with a one-touch clamp. Cleaning is simple due to the low residual amount during complete discharge. It can also be configured for pressure-resistant explosion-proof specifications as an option. Compatible materials include resin pellets, resin powder, calcium carbonate, talc, fluff, glass fiber, and carbon fiber. The hopper capacity ranges from 25L to 200L, the weighing capacity is from 30kg to 200kg, and the power supply is AC200V three-phase (single-phase) 1.5(1.8)kVA or AC200V three-phase (single-phase) 4.5(3.1)kVA. For more details, please contact us or refer to the catalog.
Vibrating the flexible supply hopper, equipped with a material-friendly bridging prevention feature!
The "CE-M" single-axis screw-type cassette weighing feeder for continuous constant flow supply of powder and granular materials such as food and plastic raw materials features a flexible supply hopper that vibrates and is equipped with a gentle bridging prevention function for the materials. Major components can be disassembled without tools. It has a low residual amount when fully discharged, making cleaning easy. Suitable materials include resin pellets, resin powder, calcium carbonate, talc, titanium dioxide, and carbon black. The hopper capacity ranges from 25L to 200L, the weighing capacity is from 30kg to 200kg, and the power supply is either AC200V single-phase 0.6kVA or AC200V single-phase 1.1kVA. For more details, please contact us or refer to the catalog.
Equipped with adhesion countermeasures, bridge countermeasures, and flash countermeasure functions!
The "CE-S" single-axis screw-type cassette weighing feeder for continuous constant flow supply of powder and granular materials such as food and plastic raw materials is equipped with features for adhesion prevention, bridging prevention, and flushing prevention. Major components can be disassembled without tools. The main body has been made lighter. It can also be customized for pressure-resistant explosion-proof specifications as an option. Applicable materials include resin pellets, resin powder, calcium carbonate, talc, titanium dioxide, and carbon black. The hopper capacity ranges from 25L to 200L, the weighing capacity is from 30kg to 200kg, and the power supply is either AC200V three-phase (single-phase) 1.5(1.8)kVA or AC200V three-phase (single-phase) 4.5(3.1)kVA. For more details, please contact us or refer to the catalog.
Align and supply granular materials on the track, enabling continuous supply with minimal pulsation!
The "CE-B" bowl-type cassette weighing feeder for "powder and bulk material equipment" continuously supplies powdered and granular raw materials such as food and plastic raw materials at a constant flow rate. It aligns and supplies bulk materials on a track, enabling a smooth and continuous supply with minimal pulsation. It delivers bulk materials in small flow rates with high precision. Major components are easy to disassemble, and there is almost no residual amount when fully discharged, making cleaning easy. Suitable materials include masterbatch pellets (color pellets) and other bulk materials. The flow rate range is 0.2 to 10 L/h, the hopper capacity is 1.5 L, the weighing capacity is 1 kg, the product weight is approximately 40 kg, and the power supply is AC 200V single-phase 0.2 kVA. For more details, please contact us or refer to the catalog.
