Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
901～915 item / All 1214 items
It is a testing machine (tack tester) used to evaluate the tack value (adhesiveness and adhesive strength) of materials such as unvulcanized rubber and adhesive tape.
The PICMA Tack Tester is a testing machine that quantitatively measures the adhesive strength of materials such as rubber, adhesive tapes, construction sealants, printing inks and rolls, and food packaging materials.
[Reference Standards] JIS K 6404-3, JIS L 1092, ISO 1420, ISO 9865
When testing the waterproofness of waterproofed fabrics, leather, etc., it is necessary to choose the equipment based on the intended purpose. This device allows for the simplest method of conducting waterproofness tests among them.
This is a portable adhesive testing machine that measures the adhesive properties (tack value) of non-sulfurized rubber, adhesive tapes, and the like. It allows for easy measurement of the adhesive strength of materials on-site.
In the molding process of tires and belts, where rubber components and reinforcing materials are layered and adhered together for vulcanization, it is very important to confirm the adhesiveness of the components in advance. This device has been developed as a tool to easily measure the adhesive strength of components on-site and can also be applied to measure the adhesive strength of tapes and similar materials. The ambient temperature at the site changes with the seasons, which also affects adhesiveness. The tackiness checker allows for easy measurement of adhesive strength on-site.
![Non-contact hardening evaluation device Cure Tester 'DH-1' [Testable]](https://image.www.ipros.com/public/product/image/4ab/2000265301/IPROS43207030295884376320.jpeg?w=280&h=280)
Using digital holography, we achieve measurement and visualization of 3D objects! It enables management of the drying state on a second-by-second basis.
This product applies digital holography technology to non-contact and quantitative evaluation of the drying and curing processes of paints and adhesives, visualizing the drying distribution. By understanding the drying process, it enables the optimization of manufacturing lines, allowing for the calculation of the necessary amount of paint and the setting of drying times based on the desired painting conditions. Furthermore, it is expected to be applicable to the evaluation of the curing process of light-curing adhesives and the drying and curing analysis of ink dots, contributing to printable electronics.
It is a testing machine (friction coefficient measuring device) that measures the static friction coefficient (μS) of materials such as plastic films, paper, and textile products using the inclined plane method.
● It has a compact space-saving design. ● It features a liquid crystal touch panel, making operations such as setting test conditions and displaying test results easy. ● Test results can be imported to a PC* (optional).
It is a specialized machine for conducting tensile and compression tests on various materials under temperature conditions. Compared to a standard universal testing machine equipped with a constant temperature chamber, it can secure a long stroke.
● A crosshead stroke of 900mm is secured within the constant temperature chamber. ● By adopting a double door design, temperature changes during the loading and unloading of test specimens can be minimized. (Note: If equipped with a standard gauge extension, only a single door will be used.) ● A 4-station (4-piece) option is also available.
This is a device that performs the mixing of pigments and vehicles under certain conditions during the paint or ink formulation stage of testing.
When converting pigments into paints or inks, a vehicle (dispersing agent) is added and ground in, but there are various methods for this process. This machine is specifically designed for testing based on JIS K 5101, and it incorporates a small amount of pigment and vehicle between two glass plates, which are rotated while applying a load with weights to facilitate the mixing process. Therefore, the setting of test conditions such as load and rotation speed can be easily adjusted depending on the type of sample.
Device for evaluating the flexibility of rubber materials at low temperatures based on JIS K 6261-3 "Low Temperature Torsion Test" (German Torsion Tester, Cold Resistance Tester)
● The installation work of the test specimen can be performed efficiently. ● By using a pulse motor for the twisting operation, excitation locking becomes possible, making wire installation easy. ● There is a lateral movement function for the test section, facilitating maintenance of the cooling tank. ● Easy operation with a liquid crystal touch panel. ● After the test is completed, measurement data can be output to an Excel worksheet. (PC and Excel are optional) ● Reference standards: JIS K6261-3, ISO 1432
It is a device that measures the gas permeability (gas barrier properties) of plastic films and rubber sheets using the differential pressure method.
- Measures gas permeability (gas barrier properties) of plastic films and rubber sheets. - Adopts automatic valves for fully automated measurements. - Does not limit the type of measurement gas. - The measurement section supports two sizes of test specimens (measurement section diameters ∅30mm and ∅70mm). - Modular design of the measurement section allows for additional expansions. - Temperature error correction function for permeating gases. - Email function enables receipt of messages in case of errors or at the end of tests. - Measurements are executed while saving data, allowing for data analysis confirmation even during tests. - Options available for measuring diffusion coefficients, solubility coefficients, and hydrogen gas. - Utilizes a high-precision vacuum gauge with a reading accuracy of 0.25%. Reference Standards: JIS K7126-1, JIS K6403-3, ISO 15105-1, ISO 2782-1 (only for CT and BT types), ISO 7229 (only for CT and BT types), JIS K6275-1 (only for CT and BT types).
This is a testing machine that conducts bending tests on FFC (Flexible Flat Cable), FPC (Flexible Printed Circuit Board), etc., to evaluate durability.
● It has a compact design for tabletop use. ● It is ideal for evaluation against strict requirements for bend resistance and heat resistance. ● It is possible to manufacture fixtures tailored to sample size and testing methods.
It is a device that measures the water vapor permeability and water vapor transmission rate (water vapor barrier properties) of materials such as plastic films using the differential pressure method.
● Measures the water vapor permeability and water vapor transmission coefficient of materials such as plastic films. ● The measurement section accommodates two sizes of test specimens (measurement section diameters ∅30mm and ∅70mm). ● Modular design of the measurement section allows for additional expansions. ● Utilizes a high-precision vacuum pressure gauge with a reading accuracy of 0.25%. ● Email functionality allows for receiving messages in case of errors or at the end of tests.
Eliminate labor shortages with the automation of measurements!
Toyo Seiki Seisakusho Co., Ltd. has been working on the full automation of material testing machines since the 1970s. Today, we offer a wide range of fully automated measurement models for tensile testing of plastics and rubber materials, melt flow rate (MFR/MVR) measurement, heat deflection temperature (HDT/DTUL) measurement, rubber vulcanization testing, and density measurement, which are utilized by customers in quality control, including those in the materials and automotive industries. Please take advantage of Toyo Seiki Seisakusho's fully automated material testing machines, which contribute not only to labor-saving and efficiency in measurement tasks but also to the improvement of reproducibility and safety of measurement results.
Puncture impact testing of rigid plastics (instrumented impact testing) | Reference standards: JIS K 7211-2, ISO 6603-2
This is an impact testing machine that simultaneously measures the force and displacement of impact destruction, allowing for the evaluation of the impact fracture characteristics of plate-like materials such as rigid plastics by measuring maximum impact force, displacement at maximum impact force, energy at maximum impact force, and puncture energy.
Adopting agricultural glass that cuts infrared rays while allowing necessary ultraviolet rays for plant cultivation to pass through! It recreates an energy-saving and cultivation-friendly environment.
The "Fighttron TPE (Standard Type)" from Espec Mic Corporation is a plant testing research laboratory that utilizes agriglass to create an energy-efficient and cultivation-friendly environment. It is available in various sizes to accommodate different applications, from small independent types to connected room types. Various options such as supplementary lighting devices, cultivation devices, and photoperiod treatment devices are also available. 【Features】 ■ Reproduces a gentle breeze environment with full floor air discharge ■ Utilizes natural light; outdoor installation type chamber ■ Small independent type and connected room type *For more details, please refer to the catalog. Feel free to contact us with any inquiries.
Introducing our various products for the increasingly diverse electrical equipment!
Our company has been manufacturing and selling user-friendly testing devices, measuring instruments, and maintenance management equipment for electrical equipment since its establishment. To respond to the increasingly diverse electrical equipment, new product development is being carried out daily, and we have assembled a wide range of products. This catalog introduces various electrical equipment from our company. [Contents] ■ Protection relay testing devices ■ Stabilized power supply units ■ AC withstand voltage testing devices ■ High-voltage insulation resistance testers ■ DC withstand voltage testing devices *For more details, please refer to the PDF materials or feel free to contact us.
